! Started logfile: J0438-0848_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:43:24 2016 obs J0438-0848_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J0438-0848_S_2014_06_09_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.694879 visibilities/baseline/integration-bin. ! Found source: J0438-0848 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 14384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0438-0848_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.930231Jy sigma=0.009567 ! Fit after self-cal, rms=0.886047Jy sigma=0.009123 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=7.559 mas, bpa=0.4071 degrees ! Estimated noise=946.337 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0763537 Jy ! Component: 100 - total flux cleaned = 0.113085 Jy ! Total flux subtracted in 100 components = 0.113085 Jy ! Clean residual min=-0.010726 max=0.021921 Jy/beam ! Clean residual mean=-0.000015 rms=0.003777 Jy/beam ! Combined flux in latest and established models = 0.113085 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.113085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111491Jy sigma=0.001092 ! Fit after self-cal, rms=0.111079Jy sigma=0.001088 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.494 mas, bmaj=9.183 mas, bpa=0.1015 degrees ! Estimated noise=585.796 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0407554 Jy ! Component: 100 - total flux cleaned = 0.062832 Jy ! Component: 150 - total flux cleaned = 0.0751941 Jy ! Component: 200 - total flux cleaned = 0.0822304 Jy ! Total flux subtracted in 200 components = 0.0822304 Jy ! Clean residual min=-0.012014 max=0.021017 Jy/beam ! Clean residual mean=-0.000009 rms=0.004410 Jy/beam ! Combined flux in latest and established models = 0.195316 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 51 components and 0.195316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095097Jy sigma=0.000930 ! Fit after self-cal, rms=0.094796Jy sigma=0.000927 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.80 HN 1.11 KP 1.07 ! LA 0.96 MK 0.83 NL 1.52 OV 1.05 ! PT 0.85 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.18 KP 1.04 ! LA 0.93 MK 0.81 NL 1.78 OV 1.09 ! PT 0.84 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.17 KP 0.93 ! LA 0.74 MK 1.00 NL 1.15 OV 1.00 ! PT 0.83 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.13 KP 0.89 ! LA 0.74 MK 0.82 NL 1.11 OV 1.06 ! PT 0.87 SC 0.93 ! ! ! Fit before self-cal, rms=0.094796Jy sigma=0.000927 ! Fit after self-cal, rms=0.091457Jy sigma=0.000854 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.422 mas, bmaj=9.276 mas, bpa=-0.04945 degrees ! Estimated noise=578.001 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (24.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0184393 Jy ! Component: 100 - total flux cleaned = 0.0280906 Jy ! Component: 150 - total flux cleaned = 0.0337351 Jy ! Component: 200 - total flux cleaned = 0.0363346 Jy ! Total flux subtracted in 200 components = 0.0363346 Jy ! Clean residual min=-0.006193 max=0.007235 Jy/beam ! Clean residual mean=-0.000025 rms=0.001973 Jy/beam ! Combined flux in latest and established models = 0.23165 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 109 components and 0.231651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088149Jy sigma=0.000806 ! Fit after self-cal, rms=0.088064Jy sigma=0.000800 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088064Jy sigma=0.000800 ! Fit after self-cal, rms=0.083671Jy sigma=0.000783 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.398 mas, bmaj=9.339 mas, bpa=-0.8202 degrees ! Estimated noise=553.564 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0055311 Jy ! Component: 100 - total flux cleaned = 0.00873844 Jy ! Component: 150 - total flux cleaned = 0.00980748 Jy ! Component: 200 - total flux cleaned = 0.010416 Jy ! Total flux subtracted in 200 components = 0.010416 Jy ! Clean residual min=-0.004218 max=0.004943 Jy/beam ! Clean residual mean=-0.000000 rms=0.001222 Jy/beam ! Combined flux in latest and established models = 0.242067 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 142 components and 0.242067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083308Jy sigma=0.000777 ! Fit after self-cal, rms=0.083304Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148269 Jy ! Component: 100 - total flux cleaned = 0.00206667 Jy ! Component: 150 - total flux cleaned = 0.00253072 Jy ! Component: 200 - total flux cleaned = 0.00295509 Jy ! Total flux subtracted in 200 components = 0.00295509 Jy ! Clean residual min=-0.004191 max=0.004562 Jy/beam ! Clean residual mean=-0.000003 rms=0.001169 Jy/beam ! Combined flux in latest and established models = 0.245022 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 151 components and 0.245022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083187Jy sigma=0.000775 ! Fit after self-cal, rms=0.083165Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083165Jy sigma=0.000775 ! Fit after self-cal, rms=0.083069Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.413 mas, bmaj=9.363 mas, bpa=-0.6357 degrees ! Estimated noise=552.089 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201741 Jy ! Component: 100 - total flux cleaned = 0.00261305 Jy ! Component: 150 - total flux cleaned = 0.00306852 Jy ! Component: 200 - total flux cleaned = 0.00343356 Jy ! Total flux subtracted in 200 components = 0.00343356 Jy ! Clean residual min=-0.003807 max=0.004392 Jy/beam ! Clean residual mean=0.000000 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.248455 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 162 components and 0.248455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082970Jy sigma=0.000773 ! Fit after self-cal, rms=0.082949Jy sigma=0.000772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000631364 Jy ! Component: 100 - total flux cleaned = 0.00092573 Jy ! Component: 150 - total flux cleaned = 0.00115183 Jy ! Component: 200 - total flux cleaned = 0.00131937 Jy ! Total flux subtracted in 200 components = 0.00131937 Jy ! Clean residual min=-0.003756 max=0.004349 Jy/beam ! Clean residual mean=-0.000001 rms=0.001034 Jy/beam ! Combined flux in latest and established models = 0.249775 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 165 components and 0.249775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082895Jy sigma=0.000772 ! Fit after self-cal, rms=0.082880Jy sigma=0.000772 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082880Jy sigma=0.000772 ! Fit after self-cal, rms=0.082897Jy sigma=0.000772 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.12 mas, bmaj=17.15 mas, bpa=-3.078 degrees ! Estimated noise=670.516 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225954 Jy ! Component: 100 - total flux cleaned = 0.00354789 Jy ! Component: 150 - total flux cleaned = 0.00379405 Jy ! Component: 200 - total flux cleaned = 0.00392729 Jy ! Total flux subtracted in 200 components = 0.00392729 Jy ! Clean residual min=-0.004557 max=0.005799 Jy/beam ! Clean residual mean=0.000001 rms=0.001481 Jy/beam ! Combined flux in latest and established models = 0.253702 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 174 components and 0.253702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082876Jy sigma=0.000772 ! Fit after self-cal, rms=0.082853Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000349737 Jy ! Component: 100 - total flux cleaned = 0.000479383 Jy ! Component: 150 - total flux cleaned = 0.000556968 Jy ! Component: 200 - total flux cleaned = 0.00066395 Jy ! Total flux subtracted in 200 components = 0.00066395 Jy ! Clean residual min=-0.004495 max=0.005645 Jy/beam ! Clean residual mean=-0.000000 rms=0.001456 Jy/beam ! Combined flux in latest and established models = 0.254366 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 177 components and 0.254366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082850Jy sigma=0.000772 ! Fit after self-cal, rms=0.082834Jy sigma=0.000772 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=9.37 mas, bpa=-0.5295 degrees ! Estimated noise=551.599 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.419 x 9.37 at -0.5295 degrees (North through East) ! Clean map min=-0.0032377 max=0.1039 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.734 mas, bmaj=7.719 mas, bpa=-0.1777 degrees ! Estimated noise=890.222 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0729394 Jy ! Component: 100 - total flux cleaned = 0.110335 Jy ! Component: 150 - total flux cleaned = 0.133737 Jy ! Component: 200 - total flux cleaned = 0.149986 Jy ! Total flux subtracted in 200 components = 0.149986 Jy ! Clean residual min=-0.007801 max=0.013082 Jy/beam ! Clean residual mean=0.000002 rms=0.002354 Jy/beam ! Combined flux in latest and established models = 0.149986 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.149986 Jy ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=9.37 mas, bpa=-0.5295 degrees ! Estimated noise=551.599 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230598 Jy ! Component: 100 - total flux cleaned = 0.0397443 Jy ! Component: 150 - total flux cleaned = 0.052427 Jy ! Component: 200 - total flux cleaned = 0.0622401 Jy ! Total flux subtracted in 200 components = 0.0622401 Jy ! Clean residual min=-0.006180 max=0.007366 Jy/beam ! Clean residual mean=-0.000001 rms=0.001910 Jy/beam ! Combined flux in latest and established models = 0.212226 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 105 components and 0.212226 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.12 mas, bmaj=17.15 mas, bpa=-3.078 degrees ! Estimated noise=670.516 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130102 Jy ! Component: 100 - total flux cleaned = 0.0218582 Jy ! Component: 150 - total flux cleaned = 0.0281585 Jy ! Component: 200 - total flux cleaned = 0.0327177 Jy ! Total flux subtracted in 200 components = 0.0327177 Jy ! Clean residual min=-0.005274 max=0.006540 Jy/beam ! Clean residual mean=0.000001 rms=0.001600 Jy/beam ! Combined flux in latest and established models = 0.244944 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334171 Jy ! Component: 100 - total flux cleaned = 0.00581271 Jy ! Component: 150 - total flux cleaned = 0.00765595 Jy ! Component: 200 - total flux cleaned = 0.00898965 Jy ! Total flux subtracted in 200 components = 0.00898965 Jy ! Clean residual min=-0.004269 max=0.005709 Jy/beam ! Clean residual mean=0.000001 rms=0.001380 Jy/beam ! Combined flux in latest and established models = 0.253933 Jy ! Adding 123 model components to the UV plane model. ! The established model now contains 210 components and 0.253933 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=9.37 mas, bpa=-0.5295 degrees ! Estimated noise=551.599 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000874086 Jy ! Component: 100 - total flux cleaned = -0.000399097 Jy ! Component: 150 - total flux cleaned = 9.1692e-05 Jy ! Component: 200 - total flux cleaned = 0.000236345 Jy ! Total flux subtracted in 200 components = 0.000236345 Jy ! Clean residual min=-0.003310 max=0.003776 Jy/beam ! Clean residual mean=0.000001 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 0.25417 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 226 components and 0.25417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082619Jy sigma=0.000771 ! Fit after self-cal, rms=0.082356Jy sigma=0.000770 wmodel J0438-0848_S_2014_06_09_pus_map.mod ! Writing 226 model components to file: J0438-0848_S_2014_06_09_pus_map.mod wobs J0438-0848_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J0438-0848_S_2014_06_09_pus_uvs.fits wwins J0438-0848_S_2014_06_09_pus_map.win ! wwins: Wrote 3 windows to J0438-0848_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000308142 Jy ! Component: 100 - total flux cleaned = 0.000699117 Jy ! Component: 150 - total flux cleaned = 0.00101183 Jy ! Component: 200 - total flux cleaned = 0.000964348 Jy ! Component: 250 - total flux cleaned = 0.000916918 Jy ! Component: 300 - total flux cleaned = 0.000827276 Jy ! Component: 350 - total flux cleaned = 0.000827301 Jy ! Component: 400 - total flux cleaned = 0.000868821 Jy ! Component: 450 - total flux cleaned = 0.000749358 Jy ! Component: 500 - total flux cleaned = 0.000672037 Jy ! Component: 550 - total flux cleaned = 0.000521551 Jy ! Component: 600 - total flux cleaned = 0.000412863 Jy ! Component: 650 - total flux cleaned = 0.000307248 Jy ! Component: 700 - total flux cleaned = 0.000272535 Jy ! Component: 750 - total flux cleaned = 3.67366e-05 Jy ! Component: 800 - total flux cleaned = 3.61597e-06 Jy ! Component: 850 - total flux cleaned = -0.000189285 Jy ! Component: 900 - total flux cleaned = -0.000220571 Jy ! Component: 950 - total flux cleaned = -0.000313546 Jy ! Component: 1000 - total flux cleaned = -0.000404744 Jy ! Component: 1050 - total flux cleaned = -0.000552956 Jy ! Component: 1100 - total flux cleaned = -0.000639473 Jy ! Component: 1150 - total flux cleaned = -0.000667794 Jy ! Component: 1200 - total flux cleaned = -0.000695386 Jy ! Component: 1250 - total flux cleaned = -0.000668005 Jy ! Component: 1300 - total flux cleaned = -0.00064182 Jy ! Component: 1350 - total flux cleaned = -0.000747163 Jy ! Component: 1400 - total flux cleaned = -0.000747021 Jy ! Component: 1450 - total flux cleaned = -0.000746919 Jy ! Component: 1500 - total flux cleaned = -0.000721695 Jy ! Component: 1550 - total flux cleaned = -0.000648078 Jy ! Component: 1600 - total flux cleaned = -0.000552181 Jy ! Component: 1650 - total flux cleaned = -0.000528741 Jy ! Component: 1700 - total flux cleaned = -0.000528773 Jy ! Component: 1750 - total flux cleaned = -0.000436645 Jy ! Component: 1800 - total flux cleaned = -0.000368705 Jy ! Component: 1850 - total flux cleaned = -0.000346364 Jy ! Component: 1900 - total flux cleaned = -0.000324514 Jy ! Component: 1950 - total flux cleaned = -0.000238839 Jy ! Component: 2000 - total flux cleaned = -0.000196849 Jy ! Component: 2050 - total flux cleaned = -0.000176318 Jy ! Component: 2100 - total flux cleaned = -0.000155675 Jy ! Component: 2150 - total flux cleaned = -3.35679e-05 Jy ! Component: 2200 - total flux cleaned = -3.38715e-05 Jy ! Component: 2250 - total flux cleaned = 6.55424e-05 Jy ! Component: 2300 - total flux cleaned = 0.000143436 Jy ! Component: 2350 - total flux cleaned = 0.000162479 Jy ! Component: 2400 - total flux cleaned = 0.000238635 Jy ! Component: 2450 - total flux cleaned = 0.000294875 Jy ! Component: 2500 - total flux cleaned = 0.000276235 Jy ! Component: 2550 - total flux cleaned = 0.000404762 Jy ! Component: 2600 - total flux cleaned = 0.000440861 Jy ! Component: 2650 - total flux cleaned = 0.000476644 Jy ! Component: 2700 - total flux cleaned = 0.000565182 Jy ! Component: 2750 - total flux cleaned = 0.000669386 Jy ! Component: 2800 - total flux cleaned = 0.000635062 Jy ! Component: 2850 - total flux cleaned = 0.000703195 Jy ! Component: 2900 - total flux cleaned = 0.000769997 Jy ! Component: 2950 - total flux cleaned = 0.000753433 Jy ! Component: 3000 - total flux cleaned = 0.000819436 Jy ! Component: 3050 - total flux cleaned = 0.000883817 Jy ! Component: 3100 - total flux cleaned = 0.000787924 Jy ! Component: 3150 - total flux cleaned = 0.000803574 Jy ! Component: 3200 - total flux cleaned = 0.00074124 Jy ! Component: 3250 - total flux cleaned = 0.000787717 Jy ! Component: 3300 - total flux cleaned = 0.000757325 Jy ! Component: 3350 - total flux cleaned = 0.000772194 Jy ! Component: 3400 - total flux cleaned = 0.000801965 Jy ! Component: 3450 - total flux cleaned = 0.000875797 Jy ! Component: 3500 - total flux cleaned = 0.000861261 Jy ! Component: 3550 - total flux cleaned = 0.000904821 Jy ! Component: 3600 - total flux cleaned = 0.001034 Jy ! Component: 3650 - total flux cleaned = 0.00104814 Jy ! Component: 3700 - total flux cleaned = 0.00107614 Jy ! Component: 3750 - total flux cleaned = 0.00107608 Jy ! Component: 3800 - total flux cleaned = 0.0011313 Jy ! Component: 3850 - total flux cleaned = 0.00118588 Jy ! Component: 3900 - total flux cleaned = 0.0011992 Jy ! Component: 3950 - total flux cleaned = 0.00122615 Jy ! Component: 4000 - total flux cleaned = 0.00125289 Jy ! Component: 4050 - total flux cleaned = 0.00133202 Jy ! Total flux subtracted in 4096 components = 0.00141057 Jy ! Clean residual min=-0.000752 max=0.000681 Jy/beam ! Clean residual mean=0.000000 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.25558 Jy keep ! Adding 352 model components to the UV plane model. ! The established model now contains 577 components and 0.25558 Jy ![Exited script file: muppet] wmap "J0438-0848_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.419 x 9.37 at -0.5295 degrees (North through East) ! Clean map min=-0.0024192 max=0.1038 Jy/beam ! Writing clean map to FITS file: J0438-0848_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.1038 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000257452 device "J0438-0848_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0438-0848_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.744078 0.744078 1.48816 2.97631 5.95262 11.9052 23.8105 47.621 95.2419 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.103 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.419 x 9.37 at -0.5295 degrees (North through East) ! Clean map min=-0.0024192 max=0.1038 Jy/beam quit ! Quitting program ! Log file J0438-0848_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:43:29 2016