! Started logfile: J0431-0406_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:16:52 2017 obs J0431-0406_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0431-0406_S_2014_01_04_pus_uva.fits ! AN table 1: 108 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0431-0406 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0431-0406_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.927220Jy sigma=0.011415 ! Fit after self-cal, rms=0.908987Jy sigma=0.011248 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.116 mas, bmaj=5.977 mas, bpa=-4.799 degrees ! Estimated noise=959.047 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0746252 Jy ! Component: 100 - total flux cleaned = 0.0912102 Jy ! Total flux subtracted in 100 components = 0.0912102 Jy ! Clean residual min=-0.005461 max=0.006965 Jy/beam ! Clean residual mean=-0.000017 rms=0.001385 Jy/beam ! Combined flux in latest and established models = 0.0912102 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0912102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098265Jy sigma=0.000904 ! Fit after self-cal, rms=0.098253Jy sigma=0.000904 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.768 mas, bmaj=6.852 mas, bpa=-2.67 degrees ! Estimated noise=640.721 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00908176 Jy ! Component: 100 - total flux cleaned = 0.013978 Jy ! Component: 150 - total flux cleaned = 0.0169614 Jy ! Component: 200 - total flux cleaned = 0.0188614 Jy ! Total flux subtracted in 200 components = 0.0188614 Jy ! Clean residual min=-0.003742 max=0.003910 Jy/beam ! Clean residual mean=-0.000015 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.110072 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 29 components and 0.110072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097402Jy sigma=0.000892 ! Fit after self-cal, rms=0.097644Jy sigma=0.000891 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* KP 1.00* LA 1.04 ! MK 1.02 NL 0.98 OV 1.03 PT 1.02 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* KP 1.00* LA 0.96 ! MK 1.02 NL 1.07 OV 1.01 PT 0.95 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00* KP 1.00* LA 0.85 ! MK 1.02 NL 1.03 OV 0.97 PT 0.98 ! SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* KP 1.00* LA 0.89 ! MK 1.04 NL 1.12 OV 1.02 PT 0.98 ! SC 0.93 ! ! ! Fit before self-cal, rms=0.097644Jy sigma=0.000891 ! Fit after self-cal, rms=0.093880Jy sigma=0.000884 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.768 mas, bmaj=6.846 mas, bpa=-1.303 degrees ! Estimated noise=635.051 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00081402 Jy ! Component: 100 - total flux cleaned = 0.000935634 Jy ! Component: 150 - total flux cleaned = 0.000987919 Jy ! Component: 200 - total flux cleaned = 0.00107289 Jy ! Total flux subtracted in 200 components = 0.00107289 Jy ! Clean residual min=-0.003371 max=0.003302 Jy/beam ! Clean residual mean=0.000001 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.111145 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 0.111145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093662Jy sigma=0.000884 ! Fit after self-cal, rms=0.093685Jy sigma=0.000884 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093685Jy sigma=0.000884 ! Fit after self-cal, rms=0.101927Jy sigma=0.000882 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.768 mas, bmaj=6.876 mas, bpa=-0.8926 degrees ! Estimated noise=635.778 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000900995 Jy ! Component: 100 - total flux cleaned = 0.000946986 Jy ! Component: 150 - total flux cleaned = 0.00098715 Jy ! Component: 200 - total flux cleaned = 0.00102129 Jy ! Total flux subtracted in 200 components = 0.00102129 Jy ! Clean residual min=-0.002865 max=0.003179 Jy/beam ! Clean residual mean=-0.000001 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.112166 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.112166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101816Jy sigma=0.000882 ! Fit after self-cal, rms=0.102065Jy sigma=0.000882 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (22, 36.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126603 Jy ! Component: 100 - total flux cleaned = 0.00119094 Jy ! Component: 150 - total flux cleaned = 0.000954993 Jy ! Component: 200 - total flux cleaned = 0.000749517 Jy ! Total flux subtracted in 200 components = 0.000749517 Jy ! Clean residual min=-0.002793 max=0.002789 Jy/beam ! Clean residual mean=-0.000001 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.112915 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 68 components and 0.112915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101722Jy sigma=0.000880 ! Fit after self-cal, rms=0.101916Jy sigma=0.000880 ! Inverting map ! Added new window around map position (-4.5, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127914 Jy ! Component: 100 - total flux cleaned = 0.00156579 Jy ! Component: 150 - total flux cleaned = 0.001399 Jy ! Component: 200 - total flux cleaned = 0.00116429 Jy ! Total flux subtracted in 200 components = 0.00116429 Jy ! Clean residual min=-0.002384 max=0.002315 Jy/beam ! Clean residual mean=0.000000 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.11408 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 85 components and 0.11408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101582Jy sigma=0.000879 ! Fit after self-cal, rms=0.101862Jy sigma=0.000879 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101862Jy sigma=0.000879 ! Fit after self-cal, rms=0.099904Jy sigma=0.000878 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.754 mas, bmaj=6.837 mas, bpa=-0.09949 degrees ! Estimated noise=632.217 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166477 Jy ! Component: 100 - total flux cleaned = 0.00182279 Jy ! Component: 150 - total flux cleaned = 0.00197095 Jy ! Component: 200 - total flux cleaned = 0.00197229 Jy ! Total flux subtracted in 200 components = 0.00197229 Jy ! Clean residual min=-0.002246 max=0.002540 Jy/beam ! Clean residual mean=-0.000002 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.116052 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 94 components and 0.116052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099643Jy sigma=0.000877 ! Fit after self-cal, rms=0.099924Jy sigma=0.000877 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-72.5, -29.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158241 Jy ! Component: 100 - total flux cleaned = 0.00212863 Jy ! Component: 150 - total flux cleaned = 0.00198825 Jy ! Component: 200 - total flux cleaned = 0.00191976 Jy ! Total flux subtracted in 200 components = 0.00191976 Jy ! Clean residual min=-0.002262 max=0.002198 Jy/beam ! Clean residual mean=-0.000002 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.117972 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 107 components and 0.117972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099653Jy sigma=0.000876 ! Fit after self-cal, rms=0.099787Jy sigma=0.000876 ! Inverting map ! Added new window around map position (-40, -16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001043 Jy ! Component: 100 - total flux cleaned = 0.00120298 Jy ! Component: 150 - total flux cleaned = 0.00134797 Jy ! Component: 200 - total flux cleaned = 0.00141678 Jy ! Total flux subtracted in 200 components = 0.00141678 Jy ! Clean residual min=-0.002285 max=0.002086 Jy/beam ! Clean residual mean=-0.000001 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.119388 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 124 components and 0.119388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099520Jy sigma=0.000876 ! Fit after self-cal, rms=0.099639Jy sigma=0.000875 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099639Jy sigma=0.000875 ! Fit after self-cal, rms=0.099589Jy sigma=0.000875 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.853 mas, bmaj=11.55 mas, bpa=6.143 degrees ! Estimated noise=721.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000954617 Jy ! Component: 100 - total flux cleaned = 0.00145731 Jy ! Component: 150 - total flux cleaned = 0.0017145 Jy ! Component: 200 - total flux cleaned = 0.00191449 Jy ! Total flux subtracted in 200 components = 0.00191449 Jy ! Clean residual min=-0.001097 max=0.001390 Jy/beam ! Clean residual mean=-0.000005 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.121303 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 146 components and 0.121303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099515Jy sigma=0.000875 ! Fit after self-cal, rms=0.099599Jy sigma=0.000875 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000146895 Jy ! Component: 100 - total flux cleaned = 0.000302471 Jy ! Component: 150 - total flux cleaned = 0.000302273 Jy ! Component: 200 - total flux cleaned = 0.000301707 Jy ! Total flux subtracted in 200 components = 0.000301707 Jy ! Clean residual min=-0.001089 max=0.001347 Jy/beam ! Clean residual mean=-0.000004 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.121605 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 162 components and 0.121605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099552Jy sigma=0.000875 ! Fit after self-cal, rms=0.099565Jy sigma=0.000875 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.761 mas, bmaj=6.836 mas, bpa=0.4332 degrees ! Estimated noise=630.218 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.761 x 6.836 at 0.4332 degrees (North through East) ! Clean map min=-0.0028523 max=0.093557 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.11 mas, bmaj=5.923 mas, bpa=-2.146 degrees ! Estimated noise=955.189 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0733441 Jy ! Component: 100 - total flux cleaned = 0.0910838 Jy ! Component: 150 - total flux cleaned = 0.0988604 Jy ! Component: 200 - total flux cleaned = 0.102301 Jy ! Total flux subtracted in 200 components = 0.102301 Jy ! Clean residual min=-0.005507 max=0.004886 Jy/beam ! Clean residual mean=-0.000010 rms=0.001294 Jy/beam ! Combined flux in latest and established models = 0.102301 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.102301 Jy ! Inverting map and beam ! Estimated beam: bmin=3.761 mas, bmaj=6.836 mas, bpa=0.4332 degrees ! Estimated noise=630.218 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00652049 Jy ! Component: 100 - total flux cleaned = 0.0099659 Jy ! Component: 150 - total flux cleaned = 0.0119562 Jy ! Component: 200 - total flux cleaned = 0.0127844 Jy ! Total flux subtracted in 200 components = 0.0127844 Jy ! Clean residual min=-0.003075 max=0.002835 Jy/beam ! Clean residual mean=-0.000009 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.115086 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 50 components and 0.115086 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.853 mas, bmaj=11.55 mas, bpa=6.143 degrees ! Estimated noise=721.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00291912 Jy ! Component: 100 - total flux cleaned = 0.00395119 Jy ! Component: 150 - total flux cleaned = 0.00441425 Jy ! Component: 200 - total flux cleaned = 0.00486569 Jy ! Total flux subtracted in 200 components = 0.00486569 Jy ! Clean residual min=-0.001540 max=0.001399 Jy/beam ! Clean residual mean=-0.000007 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.119951 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000393412 Jy ! Component: 100 - total flux cleaned = 0.000704108 Jy ! Component: 150 - total flux cleaned = 0.000844963 Jy ! Component: 200 - total flux cleaned = 0.000977847 Jy ! Total flux subtracted in 200 components = 0.000977847 Jy ! Clean residual min=-0.001288 max=0.001296 Jy/beam ! Clean residual mean=-0.000006 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.120929 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 105 components and 0.120929 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.761 mas, bmaj=6.836 mas, bpa=0.4332 degrees ! Estimated noise=630.218 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000360227 Jy ! Component: 100 - total flux cleaned = 0.000469649 Jy ! Component: 150 - total flux cleaned = 0.000659943 Jy ! Component: 200 - total flux cleaned = 0.0010195 Jy ! Total flux subtracted in 200 components = 0.0010195 Jy ! Clean residual min=-0.002750 max=0.002505 Jy/beam ! Clean residual mean=-0.000003 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.121949 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 122 components and 0.121949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099824Jy sigma=0.000877 ! Fit after self-cal, rms=0.099585Jy sigma=0.000876 wmodel J0431-0406_S_2014_01_04_pus_map.mod ! Writing 122 model components to file: J0431-0406_S_2014_01_04_pus_map.mod wobs J0431-0406_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0431-0406_S_2014_01_04_pus_uvs.fits wwins J0431-0406_S_2014_01_04_pus_map.win ! wwins: Wrote 5 windows to J0431-0406_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00044224 Jy ! Component: 100 - total flux cleaned = -0.000402519 Jy ! Component: 150 - total flux cleaned = -0.00043937 Jy ! Component: 200 - total flux cleaned = -0.000474684 Jy ! Component: 250 - total flux cleaned = -0.000576443 Jy ! Component: 300 - total flux cleaned = -0.000675399 Jy ! Component: 350 - total flux cleaned = -0.000770756 Jy ! Component: 400 - total flux cleaned = -0.000863525 Jy ! Component: 450 - total flux cleaned = -0.000924322 Jy ! Component: 500 - total flux cleaned = -0.00104416 Jy ! Component: 550 - total flux cleaned = -0.00113217 Jy ! Component: 600 - total flux cleaned = -0.00118946 Jy ! Component: 650 - total flux cleaned = -0.0012462 Jy ! Component: 700 - total flux cleaned = -0.00135653 Jy ! Component: 750 - total flux cleaned = -0.00138374 Jy ! Component: 800 - total flux cleaned = -0.00141059 Jy ! Component: 850 - total flux cleaned = -0.00135867 Jy ! Component: 900 - total flux cleaned = -0.00135923 Jy ! Component: 950 - total flux cleaned = -0.00138467 Jy ! Component: 1000 - total flux cleaned = -0.00138449 Jy ! Component: 1050 - total flux cleaned = -0.00135993 Jy ! Component: 1100 - total flux cleaned = -0.00133593 Jy ! Component: 1150 - total flux cleaned = -0.00128867 Jy ! Component: 1200 - total flux cleaned = -0.00128895 Jy ! Component: 1250 - total flux cleaned = -0.00131206 Jy ! Component: 1300 - total flux cleaned = -0.00133488 Jy ! Component: 1350 - total flux cleaned = -0.00137948 Jy ! Component: 1400 - total flux cleaned = -0.00140162 Jy ! Component: 1450 - total flux cleaned = -0.00142366 Jy ! Component: 1500 - total flux cleaned = -0.00146672 Jy ! Component: 1550 - total flux cleaned = -0.0014669 Jy ! Component: 1600 - total flux cleaned = -0.00150907 Jy ! Component: 1650 - total flux cleaned = -0.00161321 Jy ! Component: 1700 - total flux cleaned = -0.0016542 Jy ! Component: 1750 - total flux cleaned = -0.00169486 Jy ! Component: 1800 - total flux cleaned = -0.00177553 Jy ! Component: 1850 - total flux cleaned = -0.00187488 Jy ! Component: 1900 - total flux cleaned = -0.00195337 Jy ! Component: 1950 - total flux cleaned = -0.00201139 Jy ! Component: 2000 - total flux cleaned = -0.00205008 Jy ! Component: 2050 - total flux cleaned = -0.00214559 Jy ! Component: 2100 - total flux cleaned = -0.00218316 Jy ! Component: 2150 - total flux cleaned = -0.00225774 Jy ! Component: 2200 - total flux cleaned = -0.00233154 Jy ! Component: 2250 - total flux cleaned = -0.00234992 Jy ! Component: 2300 - total flux cleaned = -0.00245848 Jy ! Component: 2350 - total flux cleaned = -0.00249401 Jy ! Component: 2400 - total flux cleaned = -0.00251179 Jy ! Component: 2450 - total flux cleaned = -0.0025646 Jy ! Component: 2500 - total flux cleaned = -0.0025994 Jy ! Component: 2550 - total flux cleaned = -0.00261692 Jy ! Component: 2600 - total flux cleaned = -0.00266823 Jy ! Component: 2650 - total flux cleaned = -0.00270225 Jy ! Component: 2700 - total flux cleaned = -0.00275279 Jy ! Component: 2750 - total flux cleaned = -0.00276955 Jy ! Component: 2800 - total flux cleaned = -0.00286935 Jy ! Component: 2850 - total flux cleaned = -0.00293525 Jy ! Component: 2900 - total flux cleaned = -0.00295161 Jy ! Component: 2950 - total flux cleaned = -0.00301638 Jy ! Component: 3000 - total flux cleaned = -0.00300041 Jy ! Component: 3050 - total flux cleaned = -0.00306451 Jy ! Component: 3100 - total flux cleaned = -0.00309635 Jy ! Component: 3150 - total flux cleaned = -0.00312801 Jy ! Component: 3200 - total flux cleaned = -0.00315946 Jy ! Component: 3250 - total flux cleaned = -0.0032061 Jy ! Component: 3300 - total flux cleaned = -0.0032524 Jy ! Component: 3350 - total flux cleaned = -0.00323708 Jy ! Component: 3400 - total flux cleaned = -0.0032983 Jy ! Component: 3450 - total flux cleaned = -0.00331353 Jy ! Component: 3500 - total flux cleaned = -0.00337379 Jy ! Component: 3550 - total flux cleaned = -0.00341859 Jy ! Component: 3600 - total flux cleaned = -0.00344824 Jy ! Component: 3650 - total flux cleaned = -0.00349254 Jy ! Component: 3700 - total flux cleaned = -0.00353664 Jy ! Component: 3750 - total flux cleaned = -0.00355119 Jy ! Component: 3800 - total flux cleaned = -0.0035802 Jy ! Component: 3850 - total flux cleaned = -0.00365216 Jy ! Component: 3900 - total flux cleaned = -0.00368084 Jy ! Component: 3950 - total flux cleaned = -0.00372345 Jy ! Component: 4000 - total flux cleaned = -0.00376586 Jy ! Component: 4050 - total flux cleaned = -0.00379407 Jy ! Total flux subtracted in 4096 components = -0.00379414 Jy ! Clean residual min=-0.000725 max=0.000779 Jy/beam ! Clean residual mean=0.000000 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.118154 Jy keep ! Adding 223 model components to the UV plane model. ! The established model now contains 342 components and 0.118154 Jy ![Exited script file: muppet] wmap "J0431-0406_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.761 x 6.836 at 0.4332 degrees (North through East) ! Clean map min=-0.0022037 max=0.09276 Jy/beam ! Writing clean map to FITS file: J0431-0406_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0927603 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000231079 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.747343 0.747343 1.49469 2.98937 5.97875 11.9575 23.915 47.83 95.66 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.092 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.761 x 6.836 at 0.4332 degrees (North through East) ! Clean map min=-0.0022037 max=0.09276 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0431-0406_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:16:57 2017