! Started logfile: J0430-0523_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:43:05 2016 obs J0430-0523_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J0430-0523_S_2014_06_09_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.696357 visibilities/baseline/integration-bin. ! Found source: J0430-0523 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 15292 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0430-0523_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 199 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 199 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 199 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 199 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.001426Jy sigma=0.009489 ! Fit after self-cal, rms=0.944677Jy sigma=0.009071 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.821 mas, bmaj=7.377 mas, bpa=-0.02065 degrees ! Estimated noise=947.531 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0466956 Jy ! Component: 100 - total flux cleaned = 0.0571302 Jy ! Total flux subtracted in 100 components = 0.0571302 Jy ! Clean residual min=-0.003894 max=0.003513 Jy/beam ! Clean residual mean=0.000004 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.0571302 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0571302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153990Jy sigma=0.000792 ! Fit after self-cal, rms=0.153380Jy sigma=0.000785 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.473 mas, bmaj=8.864 mas, bpa=-0.8923 degrees ! Estimated noise=619.483 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00410674 Jy ! Component: 100 - total flux cleaned = 0.00516006 Jy ! Component: 150 - total flux cleaned = 0.00516557 Jy ! Component: 200 - total flux cleaned = 0.00516419 Jy ! Total flux subtracted in 200 components = 0.00516419 Jy ! Clean residual min=-0.002808 max=0.002695 Jy/beam ! Clean residual mean=0.000008 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.0622944 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 20 components and 0.0622944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153017Jy sigma=0.000784 ! Fit after self-cal, rms=0.153004Jy sigma=0.000784 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.85 HN 1.01 KP 1.01 ! LA 1.15 MK 0.93 NL 1.02 OV 1.03 ! PT 1.09 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.01 KP 1.09 ! LA 1.11 MK 1.06 NL 1.08 OV 1.05 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.01 KP 0.96 ! LA 0.95 MK 1.09 NL 1.00 OV 1.00 ! PT 1.04 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.96 KP 0.84 ! LA 0.88 MK 1.13 NL 1.01 OV 1.08 ! PT 0.99 SC 0.96 ! ! ! Fit before self-cal, rms=0.153004Jy sigma=0.000784 ! Fit after self-cal, rms=0.151384Jy sigma=0.000782 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.488 mas, bmaj=8.845 mas, bpa=-0.4723 degrees ! Estimated noise=634.273 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146011 Jy ! Component: 100 - total flux cleaned = 0.0017948 Jy ! Component: 150 - total flux cleaned = 0.00181315 Jy ! Component: 200 - total flux cleaned = 0.00181236 Jy ! Total flux subtracted in 200 components = 0.00181236 Jy ! Clean residual min=-0.002758 max=0.002473 Jy/beam ! Clean residual mean=0.000010 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.0641068 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 30 components and 0.0641068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151287Jy sigma=0.000782 ! Fit after self-cal, rms=0.151275Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151275Jy sigma=0.000782 ! Fit after self-cal, rms=0.091835Jy sigma=0.000777 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.476 mas, bmaj=8.892 mas, bpa=-0.2378 degrees ! Estimated noise=633.295 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127168 Jy ! Component: 100 - total flux cleaned = 0.000187976 Jy ! Component: 150 - total flux cleaned = 0.000201467 Jy ! Component: 200 - total flux cleaned = 0.000190836 Jy ! Total flux subtracted in 200 components = 0.000190836 Jy ! Clean residual min=-0.001676 max=0.002002 Jy/beam ! Clean residual mean=0.000001 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.0642976 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.0642976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091830Jy sigma=0.000777 ! Fit after self-cal, rms=0.091583Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000325601 Jy ! Component: 100 - total flux cleaned = 0.000360575 Jy ! Component: 150 - total flux cleaned = 0.00038312 Jy ! Component: 200 - total flux cleaned = 0.000396192 Jy ! Total flux subtracted in 200 components = 0.000396192 Jy ! Clean residual min=-0.001747 max=0.001906 Jy/beam ! Clean residual mean=0.000001 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.0646938 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.0646938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091581Jy sigma=0.000776 ! Fit after self-cal, rms=0.091578Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091578Jy sigma=0.000776 ! Fit after self-cal, rms=0.090645Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.462 mas, bmaj=8.888 mas, bpa=-0.2954 degrees ! Estimated noise=633.933 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000200064 Jy ! Component: 100 - total flux cleaned = 0.000241995 Jy ! Component: 150 - total flux cleaned = 0.000251092 Jy ! Component: 200 - total flux cleaned = 0.000251137 Jy ! Total flux subtracted in 200 components = 0.000251137 Jy ! Clean residual min=-0.001724 max=0.002000 Jy/beam ! Clean residual mean=0.000001 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.064945 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.064945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090642Jy sigma=0.000776 ! Fit after self-cal, rms=0.090629Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104474 Jy ! Component: 100 - total flux cleaned = 0.000111253 Jy ! Component: 150 - total flux cleaned = 0.000104887 Jy ! Component: 200 - total flux cleaned = 0.000104797 Jy ! Total flux subtracted in 200 components = 0.000104797 Jy ! Clean residual min=-0.001640 max=0.001890 Jy/beam ! Clean residual mean=0.000001 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.0650498 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 47 components and 0.0650498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090628Jy sigma=0.000776 ! Fit after self-cal, rms=0.090627Jy sigma=0.000776 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090627Jy sigma=0.000776 ! Fit after self-cal, rms=0.090738Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.822 mas, bmaj=15.58 mas, bpa=-4.182 degrees ! Estimated noise=785.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000367037 Jy ! Component: 100 - total flux cleaned = 0.000373858 Jy ! Component: 150 - total flux cleaned = 0.000380292 Jy ! Component: 200 - total flux cleaned = 0.000380576 Jy ! Total flux subtracted in 200 components = 0.000380576 Jy ! Clean residual min=-0.001615 max=0.001902 Jy/beam ! Clean residual mean=0.000001 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.0654303 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 49 components and 0.0654303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090738Jy sigma=0.000776 ! Fit after self-cal, rms=0.090745Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.81567e-05 Jy ! Component: 100 - total flux cleaned = 3.75024e-05 Jy ! Component: 150 - total flux cleaned = 3.2608e-05 Jy ! Component: 200 - total flux cleaned = 2.36071e-05 Jy ! Total flux subtracted in 200 components = 2.36071e-05 Jy ! Clean residual min=-0.001628 max=0.001889 Jy/beam ! Clean residual mean=0.000001 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0654539 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 52 components and 0.0654539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090746Jy sigma=0.000776 ! Fit after self-cal, rms=0.090745Jy sigma=0.000776 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.452 mas, bmaj=8.881 mas, bpa=-0.3568 degrees ! Estimated noise=634.972 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.452 x 8.881 at -0.3568 degrees (North through East) ! Clean map min=-0.0015814 max=0.062918 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.798 mas, bmaj=7.385 mas, bpa=0.941 degrees ! Estimated noise=961.639 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.048598 Jy ! Component: 100 - total flux cleaned = 0.0593378 Jy ! Component: 150 - total flux cleaned = 0.0628009 Jy ! Component: 200 - total flux cleaned = 0.063908 Jy ! Total flux subtracted in 200 components = 0.063908 Jy ! Clean residual min=-0.002874 max=0.002840 Jy/beam ! Clean residual mean=0.000000 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.063908 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.063908 Jy ! Inverting map and beam ! Estimated beam: bmin=3.452 mas, bmaj=8.881 mas, bpa=-0.3568 degrees ! Estimated noise=634.972 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120365 Jy ! Component: 100 - total flux cleaned = 0.00134148 Jy ! Component: 150 - total flux cleaned = 0.00136113 Jy ! Component: 200 - total flux cleaned = 0.00136021 Jy ! Total flux subtracted in 200 components = 0.00136021 Jy ! Clean residual min=-0.001615 max=0.001961 Jy/beam ! Clean residual mean=0.000001 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.0652682 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 26 components and 0.0652682 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.822 mas, bmaj=15.58 mas, bpa=-4.182 degrees ! Estimated noise=785.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142316 Jy ! Component: 100 - total flux cleaned = 0.000153697 Jy ! Component: 150 - total flux cleaned = 0.00017087 Jy ! Component: 200 - total flux cleaned = 0.000164283 Jy ! Total flux subtracted in 200 components = 0.000164283 Jy ! Clean residual min=-0.001631 max=0.001885 Jy/beam ! Clean residual mean=0.000001 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0654325 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.04823e-06 Jy ! Component: 100 - total flux cleaned = -1.16212e-05 Jy ! Component: 150 - total flux cleaned = -1.65236e-05 Jy ! Component: 200 - total flux cleaned = -1.67442e-05 Jy ! Total flux subtracted in 200 components = -1.67442e-05 Jy ! Clean residual min=-0.001632 max=0.001876 Jy/beam ! Clean residual mean=0.000001 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0654157 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 33 components and 0.0654157 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.452 mas, bmaj=8.881 mas, bpa=-0.3568 degrees ! Estimated noise=634.972 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000152486 Jy ! Component: 100 - total flux cleaned = -0.000165425 Jy ! Component: 150 - total flux cleaned = -0.000164876 Jy ! Component: 200 - total flux cleaned = -0.000146123 Jy ! Total flux subtracted in 200 components = -0.000146123 Jy ! Clean residual min=-0.001625 max=0.001925 Jy/beam ! Clean residual mean=0.000001 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.0652696 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.0652696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090747Jy sigma=0.000776 ! Fit after self-cal, rms=0.090746Jy sigma=0.000776 wmodel J0430-0523_S_2014_06_09_pus_map.mod ! Writing 43 model components to file: J0430-0523_S_2014_06_09_pus_map.mod wobs J0430-0523_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J0430-0523_S_2014_06_09_pus_uvs.fits wwins J0430-0523_S_2014_06_09_pus_map.win ! wwins: Wrote 1 windows to J0430-0523_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000547955 Jy ! Component: 100 - total flux cleaned = 0.000637832 Jy ! Component: 150 - total flux cleaned = 0.000723569 Jy ! Component: 200 - total flux cleaned = 0.000777834 Jy ! Component: 250 - total flux cleaned = 0.000751893 Jy ! Component: 300 - total flux cleaned = 0.000726295 Jy ! Component: 350 - total flux cleaned = 0.000751153 Jy ! Component: 400 - total flux cleaned = 0.000751135 Jy ! Component: 450 - total flux cleaned = 0.00082189 Jy ! Component: 500 - total flux cleaned = 0.000868199 Jy ! Component: 550 - total flux cleaned = 0.000913496 Jy ! Component: 600 - total flux cleaned = 0.00100221 Jy ! Component: 650 - total flux cleaned = 0.00111022 Jy ! Component: 700 - total flux cleaned = 0.00113154 Jy ! Component: 750 - total flux cleaned = 0.00127688 Jy ! Component: 800 - total flux cleaned = 0.00133809 Jy ! Component: 850 - total flux cleaned = 0.00143879 Jy ! Component: 900 - total flux cleaned = 0.00149792 Jy ! Component: 950 - total flux cleaned = 0.00155657 Jy ! Component: 1000 - total flux cleaned = 0.00161429 Jy ! Component: 1050 - total flux cleaned = 0.00172798 Jy ! Component: 1100 - total flux cleaned = 0.00180229 Jy ! Component: 1150 - total flux cleaned = 0.00187594 Jy ! Component: 1200 - total flux cleaned = 0.00194841 Jy ! Component: 1250 - total flux cleaned = 0.0020203 Jy ! Component: 1300 - total flux cleaned = 0.00209084 Jy ! Component: 1350 - total flux cleaned = 0.00209048 Jy ! Component: 1400 - total flux cleaned = 0.00210788 Jy ! Component: 1450 - total flux cleaned = 0.002176 Jy ! Component: 1500 - total flux cleaned = 0.00222639 Jy ! Component: 1550 - total flux cleaned = 0.00230968 Jy ! Component: 1600 - total flux cleaned = 0.00237537 Jy ! Component: 1650 - total flux cleaned = 0.00242442 Jy ! Component: 1700 - total flux cleaned = 0.00248899 Jy ! Component: 1750 - total flux cleaned = 0.00258459 Jy ! Component: 1800 - total flux cleaned = 0.00263191 Jy ! Component: 1850 - total flux cleaned = 0.00272539 Jy ! Component: 1900 - total flux cleaned = 0.0028024 Jy ! Component: 1950 - total flux cleaned = 0.00281775 Jy ! Component: 2000 - total flux cleaned = 0.00292327 Jy ! Component: 2050 - total flux cleaned = 0.00298274 Jy ! Component: 2100 - total flux cleaned = 0.00301223 Jy ! Component: 2150 - total flux cleaned = 0.00307083 Jy ! Component: 2200 - total flux cleaned = 0.00308535 Jy ! Component: 2250 - total flux cleaned = 0.00311395 Jy ! Component: 2300 - total flux cleaned = 0.00321301 Jy ! Component: 2350 - total flux cleaned = 0.00319907 Jy ! Component: 2400 - total flux cleaned = 0.00326854 Jy ! Component: 2450 - total flux cleaned = 0.00336478 Jy ! Component: 2500 - total flux cleaned = 0.00339197 Jy ! Component: 2550 - total flux cleaned = 0.00345955 Jy ! Component: 2600 - total flux cleaned = 0.00353987 Jy ! Component: 2650 - total flux cleaned = 0.00357971 Jy ! Component: 2700 - total flux cleaned = 0.00363243 Jy ! Component: 2750 - total flux cleaned = 0.00367163 Jy ! Component: 2800 - total flux cleaned = 0.00372332 Jy ! Component: 2850 - total flux cleaned = 0.00374904 Jy ! Component: 2900 - total flux cleaned = 0.00378713 Jy ! Component: 2950 - total flux cleaned = 0.00383754 Jy ! Component: 3000 - total flux cleaned = 0.00387486 Jy ! Component: 3050 - total flux cleaned = 0.00391218 Jy ! Component: 3100 - total flux cleaned = 0.00392438 Jy ! Component: 3150 - total flux cleaned = 0.00396112 Jy ! Component: 3200 - total flux cleaned = 0.00398531 Jy ! Component: 3250 - total flux cleaned = 0.00402141 Jy ! Component: 3300 - total flux cleaned = 0.00405721 Jy ! Component: 3350 - total flux cleaned = 0.00408092 Jy ! Component: 3400 - total flux cleaned = 0.00411603 Jy ! Component: 3450 - total flux cleaned = 0.00415082 Jy ! Component: 3500 - total flux cleaned = 0.0042086 Jy ! Component: 3550 - total flux cleaned = 0.00423149 Jy ! Component: 3600 - total flux cleaned = 0.00423138 Jy ! Component: 3650 - total flux cleaned = 0.00426544 Jy ! Component: 3700 - total flux cleaned = 0.00429907 Jy ! Component: 3750 - total flux cleaned = 0.00431026 Jy ! Component: 3800 - total flux cleaned = 0.00431016 Jy ! Component: 3850 - total flux cleaned = 0.00433222 Jy ! Component: 3900 - total flux cleaned = 0.00436507 Jy ! Component: 3950 - total flux cleaned = 0.00438685 Jy ! Component: 4000 - total flux cleaned = 0.0043976 Jy ! Component: 4050 - total flux cleaned = 0.00438696 Jy ! Total flux subtracted in 4096 components = 0.00437631 Jy ! Clean residual min=-0.000716 max=0.000572 Jy/beam ! Clean residual mean=-0.000000 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.0696459 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 308 components and 0.0696459 Jy ![Exited script file: muppet] wmap "J0430-0523_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.452 x 8.881 at -0.3568 degrees (North through East) ! Clean map min=-0.0012324 max=0.06322 Jy/beam ! Writing clean map to FITS file: J0430-0523_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0632195 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000195763 device "J0430-0523_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0430-0523_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.928969 0.928969 1.85794 3.71588 7.43175 14.8635 29.727 59.454 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.063 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.452 x 8.881 at -0.3568 degrees (North through East) ! Clean map min=-0.0012324 max=0.06322 Jy/beam quit ! Quitting program ! Log file J0430-0523_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:43:10 2016