! Started logfile: J0427-0700_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:43:01 2016 obs J0427-0700_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J0427-0700_S_2014_06_09_pus_uva.fits ! AN table 1: 55 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.690101 visibilities/baseline/integration-bin. ! Found source: J0427-0700 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 6832 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0427-0700_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.829268Jy sigma=0.007906 ! Fit after self-cal, rms=0.798862Jy sigma=0.007652 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.875 mas, bmaj=7.71 mas, bpa=0.1055 degrees ! Estimated noise=1202.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.163036 Jy ! Component: 100 - total flux cleaned = 0.198896 Jy ! Total flux subtracted in 100 components = 0.198896 Jy ! Clean residual min=-0.009208 max=0.011310 Jy/beam ! Clean residual mean=0.000003 rms=0.001999 Jy/beam ! Combined flux in latest and established models = 0.198896 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.198896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140754Jy sigma=0.000876 ! Fit after self-cal, rms=0.140685Jy sigma=0.000876 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=8.974 mas, bpa=0.04423 degrees ! Estimated noise=921.245 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119255 Jy ! Component: 100 - total flux cleaned = 0.0167638 Jy ! Component: 150 - total flux cleaned = 0.0185651 Jy ! Component: 200 - total flux cleaned = 0.0188754 Jy ! Total flux subtracted in 200 components = 0.0188754 Jy ! Clean residual min=-0.005185 max=0.004756 Jy/beam ! Clean residual mean=-0.000004 rms=0.001319 Jy/beam ! Combined flux in latest and established models = 0.217771 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 20 components and 0.217771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139521Jy sigma=0.000866 ! Fit after self-cal, rms=0.139463Jy sigma=0.000866 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.84 HN 0.96 KP 1.04 ! LA 1.15 MK 0.97 NL 0.97 OV 1.03 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.05 KP 1.00 ! LA 1.14 MK 0.99 NL 1.06 OV 1.08 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.03 KP 0.89 ! LA 0.87 MK 1.05 NL 1.02 OV 0.93 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.01 KP 0.84 ! LA 0.87 MK 1.00 NL 1.04 OV 1.01 ! PT 1.01 SC 0.98 ! ! ! Fit before self-cal, rms=0.139463Jy sigma=0.000866 ! Fit after self-cal, rms=0.129639Jy sigma=0.000839 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=8.98 mas, bpa=0.1519 degrees ! Estimated noise=917.728 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000277831 Jy ! Component: 100 - total flux cleaned = -0.000154664 Jy ! Component: 150 - total flux cleaned = -0.000121469 Jy ! Component: 200 - total flux cleaned = -0.000152343 Jy ! Total flux subtracted in 200 components = -0.000152343 Jy ! Clean residual min=-0.003400 max=0.003946 Jy/beam ! Clean residual mean=0.000003 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.217619 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 24 components and 0.217619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129609Jy sigma=0.000839 ! Fit after self-cal, rms=0.129601Jy sigma=0.000839 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129601Jy sigma=0.000839 ! Fit after self-cal, rms=0.134484Jy sigma=0.000833 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.477 mas, bmaj=8.969 mas, bpa=0.1671 degrees ! Estimated noise=918.071 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.17283e-05 Jy ! Component: 100 - total flux cleaned = 7.22851e-05 Jy ! Component: 150 - total flux cleaned = 9.12616e-05 Jy ! Component: 200 - total flux cleaned = 9.07081e-05 Jy ! Total flux subtracted in 200 components = 9.07081e-05 Jy ! Clean residual min=-0.002912 max=0.003234 Jy/beam ! Clean residual mean=0.000002 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.21771 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.21771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134473Jy sigma=0.000833 ! Fit after self-cal, rms=0.134534Jy sigma=0.000833 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-58.5, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211531 Jy ! Component: 100 - total flux cleaned = 0.00186102 Jy ! Component: 150 - total flux cleaned = 0.00194229 Jy ! Component: 200 - total flux cleaned = 0.00201108 Jy ! Total flux subtracted in 200 components = 0.00201108 Jy ! Clean residual min=-0.002845 max=0.002559 Jy/beam ! Clean residual mean=0.000001 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.219721 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 52 components and 0.219721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134485Jy sigma=0.000832 ! Fit after self-cal, rms=0.134478Jy sigma=0.000832 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134478Jy sigma=0.000832 ! Fit after self-cal, rms=0.134596Jy sigma=0.000832 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.477 mas, bmaj=8.974 mas, bpa=0.1266 degrees ! Estimated noise=918.095 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000581655 Jy ! Component: 100 - total flux cleaned = 0.000645855 Jy ! Component: 150 - total flux cleaned = 0.000589944 Jy ! Component: 200 - total flux cleaned = 0.000538093 Jy ! Total flux subtracted in 200 components = 0.000538093 Jy ! Clean residual min=-0.002903 max=0.002481 Jy/beam ! Clean residual mean=0.000001 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.220259 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 62 components and 0.220259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134581Jy sigma=0.000832 ! Fit after self-cal, rms=0.134584Jy sigma=0.000832 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174591 Jy ! Component: 100 - total flux cleaned = 0.000148938 Jy ! Component: 150 - total flux cleaned = 0.00010002 Jy ! Component: 200 - total flux cleaned = 7.73039e-05 Jy ! Total flux subtracted in 200 components = 7.73039e-05 Jy ! Clean residual min=-0.002904 max=0.002481 Jy/beam ! Clean residual mean=0.000001 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.220336 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 67 components and 0.220336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134573Jy sigma=0.000832 ! Fit after self-cal, rms=0.134573Jy sigma=0.000832 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134573Jy sigma=0.000832 ! Fit after self-cal, rms=0.134626Jy sigma=0.000832 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.909 mas, bmaj=15.88 mas, bpa=-3.484 degrees ! Estimated noise=1127.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000345483 Jy ! Component: 100 - total flux cleaned = 0.000320692 Jy ! Component: 150 - total flux cleaned = 0.000282848 Jy ! Component: 200 - total flux cleaned = 0.000249099 Jy ! Total flux subtracted in 200 components = 0.000249099 Jy ! Clean residual min=-0.002820 max=0.003311 Jy/beam ! Clean residual mean=0.000003 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.220585 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 83 components and 0.220585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134622Jy sigma=0.000832 ! Fit after self-cal, rms=0.134625Jy sigma=0.000832 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.97717e-05 Jy ! Component: 100 - total flux cleaned = -2.3369e-05 Jy ! Component: 150 - total flux cleaned = -7.00435e-05 Jy ! Component: 200 - total flux cleaned = -9.7894e-05 Jy ! Total flux subtracted in 200 components = -9.7894e-05 Jy ! Clean residual min=-0.002801 max=0.003292 Jy/beam ! Clean residual mean=0.000003 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.220488 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 90 components and 0.220488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134625Jy sigma=0.000832 ! Fit after self-cal, rms=0.134626Jy sigma=0.000832 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.477 mas, bmaj=8.975 mas, bpa=0.1041 degrees ! Estimated noise=918.416 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.477 x 8.975 at 0.1041 degrees (North through East) ! Clean map min=-0.002749 max=0.20923 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.875 mas, bmaj=7.715 mas, bpa=0.1632 degrees ! Estimated noise=1196.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.161933 Jy ! Component: 100 - total flux cleaned = 0.197679 Jy ! Component: 150 - total flux cleaned = 0.209064 Jy ! Component: 200 - total flux cleaned = 0.214853 Jy ! Total flux subtracted in 200 components = 0.214853 Jy ! Clean residual min=-0.004760 max=0.004698 Jy/beam ! Clean residual mean=0.000003 rms=0.001145 Jy/beam ! Combined flux in latest and established models = 0.214853 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.214853 Jy ! Inverting map and beam ! Estimated beam: bmin=3.477 mas, bmaj=8.975 mas, bpa=0.1041 degrees ! Estimated noise=918.416 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00437448 Jy ! Component: 100 - total flux cleaned = 0.00597608 Jy ! Component: 150 - total flux cleaned = 0.00640097 Jy ! Component: 200 - total flux cleaned = 0.0067623 Jy ! Total flux subtracted in 200 components = 0.0067623 Jy ! Clean residual min=-0.002770 max=0.002860 Jy/beam ! Clean residual mean=0.000002 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.221616 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 40 components and 0.221616 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.909 mas, bmaj=15.88 mas, bpa=-3.484 degrees ! Estimated noise=1127.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000360944 Jy ! Component: 100 - total flux cleaned = 0.000879077 Jy ! Component: 150 - total flux cleaned = 0.00121684 Jy ! Component: 200 - total flux cleaned = 0.00126859 Jy ! Total flux subtracted in 200 components = 0.00126859 Jy ! Clean residual min=-0.002684 max=0.003131 Jy/beam ! Clean residual mean=0.000003 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.222884 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.6449e-05 Jy ! Component: 100 - total flux cleaned = 2.5594e-05 Jy ! Component: 150 - total flux cleaned = 2.49926e-05 Jy ! Component: 200 - total flux cleaned = 5.11561e-06 Jy ! Total flux subtracted in 200 components = 5.11561e-06 Jy ! Clean residual min=-0.002682 max=0.003087 Jy/beam ! Clean residual mean=0.000003 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.222889 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 69 components and 0.222889 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.477 mas, bmaj=8.975 mas, bpa=0.1041 degrees ! Estimated noise=918.416 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000629794 Jy ! Component: 100 - total flux cleaned = -0.000632451 Jy ! Component: 150 - total flux cleaned = -0.000633624 Jy ! Component: 200 - total flux cleaned = -0.000701925 Jy ! Total flux subtracted in 200 components = -0.000701925 Jy ! Clean residual min=-0.002699 max=0.002683 Jy/beam ! Clean residual mean=0.000002 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.222187 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 87 components and 0.222187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134645Jy sigma=0.000832 ! Fit after self-cal, rms=0.134643Jy sigma=0.000832 wmodel J0427-0700_S_2014_06_09_pus_map.mod ! Writing 87 model components to file: J0427-0700_S_2014_06_09_pus_map.mod wobs J0427-0700_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J0427-0700_S_2014_06_09_pus_uvs.fits wwins J0427-0700_S_2014_06_09_pus_map.win ! wwins: Wrote 3 windows to J0427-0700_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000502723 Jy ! Component: 100 - total flux cleaned = -0.000864463 Jy ! Component: 150 - total flux cleaned = -0.00116279 Jy ! Component: 200 - total flux cleaned = -0.00120338 Jy ! Component: 250 - total flux cleaned = -0.00124255 Jy ! Component: 300 - total flux cleaned = -0.00124115 Jy ! Component: 350 - total flux cleaned = -0.00112909 Jy ! Component: 400 - total flux cleaned = -0.00101993 Jy ! Component: 450 - total flux cleaned = -0.00094879 Jy ! Component: 500 - total flux cleaned = -0.000879229 Jy ! Component: 550 - total flux cleaned = -0.00087912 Jy ! Component: 600 - total flux cleaned = -0.00084626 Jy ! Component: 650 - total flux cleaned = -0.000847525 Jy ! Component: 700 - total flux cleaned = -0.000848218 Jy ! Component: 750 - total flux cleaned = -0.000817089 Jy ! Component: 800 - total flux cleaned = -0.000816949 Jy ! Component: 850 - total flux cleaned = -0.000816726 Jy ! Component: 900 - total flux cleaned = -0.000757977 Jy ! Component: 950 - total flux cleaned = -0.000846572 Jy ! Component: 1000 - total flux cleaned = -0.000933151 Jy ! Component: 1050 - total flux cleaned = -0.00101825 Jy ! Component: 1100 - total flux cleaned = -0.00107411 Jy ! Component: 1150 - total flux cleaned = -0.0011293 Jy ! Component: 1200 - total flux cleaned = -0.00110195 Jy ! Component: 1250 - total flux cleaned = -0.00112872 Jy ! Component: 1300 - total flux cleaned = -0.00115521 Jy ! Component: 1350 - total flux cleaned = -0.0011814 Jy ! Component: 1400 - total flux cleaned = -0.00115594 Jy ! Component: 1450 - total flux cleaned = -0.00125797 Jy ! Component: 1500 - total flux cleaned = -0.00123264 Jy ! Component: 1550 - total flux cleaned = -0.00120778 Jy ! Component: 1600 - total flux cleaned = -0.00120745 Jy ! Component: 1650 - total flux cleaned = -0.00118256 Jy ! Component: 1700 - total flux cleaned = -0.00115865 Jy ! Component: 1750 - total flux cleaned = -0.00120626 Jy ! Component: 1800 - total flux cleaned = -0.00130006 Jy ! Component: 1850 - total flux cleaned = -0.00118337 Jy ! Component: 1900 - total flux cleaned = -0.00125273 Jy ! Component: 1950 - total flux cleaned = -0.00129829 Jy ! Component: 2000 - total flux cleaned = -0.00125269 Jy ! Component: 2050 - total flux cleaned = -0.00118569 Jy ! Component: 2100 - total flux cleaned = -0.00118557 Jy ! Component: 2150 - total flux cleaned = -0.00122942 Jy ! Component: 2200 - total flux cleaned = -0.00122911 Jy ! Component: 2250 - total flux cleaned = -0.0010791 Jy ! Component: 2300 - total flux cleaned = -0.00116459 Jy ! Component: 2350 - total flux cleaned = -0.00120666 Jy ! Component: 2400 - total flux cleaned = -0.00112294 Jy ! Component: 2450 - total flux cleaned = -0.00112307 Jy ! Component: 2500 - total flux cleaned = -0.00110248 Jy ! Component: 2550 - total flux cleaned = -0.00112259 Jy ! Component: 2600 - total flux cleaned = -0.00108275 Jy ! Component: 2650 - total flux cleaned = -0.00104303 Jy ! Component: 2700 - total flux cleaned = -0.00108298 Jy ! Component: 2750 - total flux cleaned = -0.00112209 Jy ! Component: 2800 - total flux cleaned = -0.00120014 Jy ! Component: 2850 - total flux cleaned = -0.0012195 Jy ! Component: 2900 - total flux cleaned = -0.00129625 Jy ! Component: 2950 - total flux cleaned = -0.00135348 Jy ! Component: 3000 - total flux cleaned = -0.00127783 Jy ! Component: 3050 - total flux cleaned = -0.00137167 Jy ! Component: 3100 - total flux cleaned = -0.00146486 Jy ! Component: 3150 - total flux cleaned = -0.00144625 Jy ! Component: 3200 - total flux cleaned = -0.00153812 Jy ! Component: 3250 - total flux cleaned = -0.00155618 Jy ! Component: 3300 - total flux cleaned = -0.00159254 Jy ! Component: 3350 - total flux cleaned = -0.00166445 Jy ! Component: 3400 - total flux cleaned = -0.00171815 Jy ! Component: 3450 - total flux cleaned = -0.00170059 Jy ! Component: 3500 - total flux cleaned = -0.00178907 Jy ! Component: 3550 - total flux cleaned = -0.00177155 Jy ! Component: 3600 - total flux cleaned = -0.00184147 Jy ! Component: 3650 - total flux cleaned = -0.00185868 Jy ! Component: 3700 - total flux cleaned = -0.00192758 Jy ! Component: 3750 - total flux cleaned = -0.00196166 Jy ! Component: 3800 - total flux cleaned = -0.00197875 Jy ! Component: 3850 - total flux cleaned = -0.00194481 Jy ! Component: 3900 - total flux cleaned = -0.00201223 Jy ! Component: 3950 - total flux cleaned = -0.00201225 Jy ! Component: 4000 - total flux cleaned = -0.00204544 Jy ! Component: 4050 - total flux cleaned = -0.00206207 Jy ! Total flux subtracted in 4096 components = -0.00211157 Jy ! Clean residual min=-0.001036 max=0.000978 Jy/beam ! Clean residual mean=0.000001 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.220076 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 369 components and 0.220076 Jy ![Exited script file: muppet] wmap "J0427-0700_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.477 x 8.975 at 0.1041 degrees (North through East) ! Clean map min=-0.0024995 max=0.20916 Jy/beam ! Writing clean map to FITS file: J0427-0700_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.209162 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000304807 device "J0427-0700_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0427-0700_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.437183 0.437183 0.874366 1.74873 3.49746 6.99493 13.9899 27.9797 55.9594 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.209 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.477 x 8.975 at 0.1041 degrees (North through East) ! Clean map min=-0.0024995 max=0.20916 Jy/beam quit ! Quitting program ! Log file J0427-0700_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:43:05 2016