! Started logfile: J0419-2132_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:16:33 2017 obs J0419-2132_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0419-2132_S_2014_01_04_pus_uva.fits ! AN table 1: 126 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0419-2132 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 10584 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0419-2132_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 252 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 252 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 252 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 252 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.903927Jy sigma=0.010120 ! Fit after self-cal, rms=0.877603Jy sigma=0.009817 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.371 mas, bmaj=5.683 mas, bpa=-4.034 degrees ! Estimated noise=1023.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0936393 Jy ! Component: 100 - total flux cleaned = 0.11507 Jy ! Total flux subtracted in 100 components = 0.11507 Jy ! Clean residual min=-0.008352 max=0.008556 Jy/beam ! Clean residual mean=-0.000016 rms=0.002088 Jy/beam ! Combined flux in latest and established models = 0.11507 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.11507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101632Jy sigma=0.000956 ! Fit after self-cal, rms=0.101647Jy sigma=0.000955 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.823 mas, bmaj=6.733 mas, bpa=-3.29 degrees ! Estimated noise=643.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133488 Jy ! Component: 100 - total flux cleaned = 0.0196435 Jy ! Component: 150 - total flux cleaned = 0.0229942 Jy ! Component: 200 - total flux cleaned = 0.0248755 Jy ! Total flux subtracted in 200 components = 0.0248755 Jy ! Clean residual min=-0.006823 max=0.005991 Jy/beam ! Clean residual mean=0.000005 rms=0.001752 Jy/beam ! Combined flux in latest and established models = 0.139945 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 37 components and 0.139945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099426Jy sigma=0.000942 ! Fit after self-cal, rms=0.099538Jy sigma=0.000942 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* KP 1.00* LA 1.08 ! MK 1.00 NL 0.91 OV 1.02 PT 1.02 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* KP 1.00* LA 1.02 ! MK 1.00 NL 0.98 OV 1.07 PT 1.02 ! SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* KP 1.00* LA 0.86 ! MK 1.01 NL 1.04 OV 0.99 PT 0.98 ! SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.00* KP 1.00* LA 0.91 ! MK 1.02 NL 1.13 OV 1.08 PT 1.03 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.099538Jy sigma=0.000942 ! Fit after self-cal, rms=0.099246Jy sigma=0.000931 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.827 mas, bmaj=6.738 mas, bpa=-3.344 degrees ! Estimated noise=655.802 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249073 Jy ! Component: 100 - total flux cleaned = 0.00358009 Jy ! Component: 150 - total flux cleaned = 0.00416951 Jy ! Component: 200 - total flux cleaned = 0.00443647 Jy ! Total flux subtracted in 200 components = 0.00443647 Jy ! Clean residual min=-0.007221 max=0.005642 Jy/beam ! Clean residual mean=0.000001 rms=0.001663 Jy/beam ! Combined flux in latest and established models = 0.144382 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 0.144382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099069Jy sigma=0.000932 ! Fit after self-cal, rms=0.099068Jy sigma=0.000932 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099068Jy sigma=0.000932 ! Fit after self-cal, rms=0.102911Jy sigma=0.000929 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.805 mas, bmaj=6.716 mas, bpa=-3.444 degrees ! Estimated noise=677.782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038151 Jy ! Component: 100 - total flux cleaned = 0.00550581 Jy ! Component: 150 - total flux cleaned = 0.00644667 Jy ! Component: 200 - total flux cleaned = 0.00697429 Jy ! Total flux subtracted in 200 components = 0.00697429 Jy ! Clean residual min=-0.007187 max=0.004921 Jy/beam ! Clean residual mean=0.000011 rms=0.001576 Jy/beam ! Combined flux in latest and established models = 0.151356 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 44 components and 0.151356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102601Jy sigma=0.000929 ! Fit after self-cal, rms=0.102548Jy sigma=0.000929 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00023119 Jy ! Component: 100 - total flux cleaned = 0.000242493 Jy ! Component: 150 - total flux cleaned = 0.000242261 Jy ! Component: 200 - total flux cleaned = 0.000242372 Jy ! Total flux subtracted in 200 components = 0.000242372 Jy ! Clean residual min=-0.007216 max=0.004896 Jy/beam ! Clean residual mean=0.000011 rms=0.001579 Jy/beam ! Combined flux in latest and established models = 0.151598 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.151598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102539Jy sigma=0.000929 ! Fit after self-cal, rms=0.102540Jy sigma=0.000929 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102540Jy sigma=0.000929 ! Fit after self-cal, rms=0.092393Jy sigma=0.000908 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.806 mas, bmaj=6.704 mas, bpa=-3.435 degrees ! Estimated noise=680.496 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000669947 Jy ! Component: 100 - total flux cleaned = 0.000778409 Jy ! Component: 150 - total flux cleaned = 0.000815252 Jy ! Component: 200 - total flux cleaned = 0.000845879 Jy ! Total flux subtracted in 200 components = 0.000845879 Jy ! Clean residual min=-0.002061 max=0.002170 Jy/beam ! Clean residual mean=0.000003 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.152444 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 54 components and 0.152444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092383Jy sigma=0.000908 ! Fit after self-cal, rms=0.092391Jy sigma=0.000907 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.10366e-09 Jy ! Component: 100 - total flux cleaned = 1.73607e-05 Jy ! Component: 150 - total flux cleaned = 2.56607e-05 Jy ! Component: 200 - total flux cleaned = 3.33277e-05 Jy ! Total flux subtracted in 200 components = 3.33277e-05 Jy ! Clean residual min=-0.002242 max=0.002073 Jy/beam ! Clean residual mean=0.000003 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.152477 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.152477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092389Jy sigma=0.000907 ! Fit after self-cal, rms=0.092388Jy sigma=0.000907 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092388Jy sigma=0.000907 ! Fit after self-cal, rms=0.092615Jy sigma=0.000906 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.62 mas, bmaj=17.15 mas, bpa=1.258 degrees ! Estimated noise=875.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000660577 Jy ! Component: 100 - total flux cleaned = 0.00068247 Jy ! Component: 150 - total flux cleaned = 0.000699248 Jy ! Component: 200 - total flux cleaned = 0.000705765 Jy ! Total flux subtracted in 200 components = 0.000705765 Jy ! Clean residual min=-0.001913 max=0.002440 Jy/beam ! Clean residual mean=0.000004 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.153183 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 63 components and 0.153183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092611Jy sigma=0.000906 ! Fit after self-cal, rms=0.092622Jy sigma=0.000906 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.93749e-05 Jy ! Component: 100 - total flux cleaned = -2.95203e-05 Jy ! Component: 150 - total flux cleaned = -2.9225e-05 Jy ! Component: 200 - total flux cleaned = -2.34431e-05 Jy ! Total flux subtracted in 200 components = -2.34431e-05 Jy ! Clean residual min=-0.001917 max=0.002469 Jy/beam ! Clean residual mean=0.000004 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.15316 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 66 components and 0.15316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092622Jy sigma=0.000906 ! Fit after self-cal, rms=0.092621Jy sigma=0.000906 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=6.697 mas, bpa=-3.36 degrees ! Estimated noise=682.986 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.804 x 6.697 at -3.36 degrees (North through East) ! Clean map min=-0.0020119 max=0.12878 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.35 mas, bmaj=5.649 mas, bpa=-4.061 degrees ! Estimated noise=1087.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0993596 Jy ! Component: 100 - total flux cleaned = 0.123218 Jy ! Component: 150 - total flux cleaned = 0.134532 Jy ! Component: 200 - total flux cleaned = 0.141334 Jy ! Total flux subtracted in 200 components = 0.141334 Jy ! Clean residual min=-0.004795 max=0.004937 Jy/beam ! Clean residual mean=-0.000009 rms=0.001272 Jy/beam ! Combined flux in latest and established models = 0.141334 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.141334 Jy ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=6.697 mas, bpa=-3.36 degrees ! Estimated noise=682.986 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00552809 Jy ! Component: 100 - total flux cleaned = 0.00812943 Jy ! Component: 150 - total flux cleaned = 0.00951762 Jy ! Component: 200 - total flux cleaned = 0.0102954 Jy ! Total flux subtracted in 200 components = 0.0102954 Jy ! Clean residual min=-0.002137 max=0.002090 Jy/beam ! Clean residual mean=0.000000 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.15163 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 51 components and 0.15163 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.62 mas, bmaj=17.15 mas, bpa=1.258 degrees ! Estimated noise=875.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000766211 Jy ! Component: 100 - total flux cleaned = 0.000931635 Jy ! Component: 150 - total flux cleaned = 0.000935482 Jy ! Component: 200 - total flux cleaned = 0.000931956 Jy ! Total flux subtracted in 200 components = 0.000931956 Jy ! Clean residual min=-0.002032 max=0.002434 Jy/beam ! Clean residual mean=0.000003 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.152562 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.51839e-06 Jy ! Component: 100 - total flux cleaned = -1.03664e-05 Jy ! Component: 150 - total flux cleaned = -1.36042e-05 Jy ! Component: 200 - total flux cleaned = -1.37331e-05 Jy ! Total flux subtracted in 200 components = -1.37331e-05 Jy ! Clean residual min=-0.002021 max=0.002428 Jy/beam ! Clean residual mean=0.000003 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.152548 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 58 components and 0.152548 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=6.697 mas, bpa=-3.36 degrees ! Estimated noise=682.986 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000438783 Jy ! Component: 100 - total flux cleaned = -0.000365142 Jy ! Component: 150 - total flux cleaned = -0.00031822 Jy ! Component: 200 - total flux cleaned = -0.000258568 Jy ! Total flux subtracted in 200 components = -0.000258568 Jy ! Clean residual min=-0.002099 max=0.002118 Jy/beam ! Clean residual mean=0.000001 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.152289 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 63 components and 0.152289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092628Jy sigma=0.000907 ! Fit after self-cal, rms=0.092606Jy sigma=0.000907 wmodel J0419-2132_S_2014_01_04_pus_map.mod ! Writing 63 model components to file: J0419-2132_S_2014_01_04_pus_map.mod wobs J0419-2132_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0419-2132_S_2014_01_04_pus_uvs.fits wwins J0419-2132_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J0419-2132_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.96733e-05 Jy ! Component: 100 - total flux cleaned = 7.34261e-05 Jy ! Component: 150 - total flux cleaned = 0.000172406 Jy ! Component: 200 - total flux cleaned = 0.000362532 Jy ! Component: 250 - total flux cleaned = 0.000453053 Jy ! Component: 300 - total flux cleaned = 0.000482192 Jy ! Component: 350 - total flux cleaned = 0.000509982 Jy ! Component: 400 - total flux cleaned = 0.000455386 Jy ! Component: 450 - total flux cleaned = 0.000457022 Jy ! Component: 500 - total flux cleaned = 0.000457516 Jy ! Component: 550 - total flux cleaned = 0.000483058 Jy ! Component: 600 - total flux cleaned = 0.000531588 Jy ! Component: 650 - total flux cleaned = 0.000579126 Jy ! Component: 700 - total flux cleaned = 0.000625593 Jy ! Component: 750 - total flux cleaned = 0.000602354 Jy ! Component: 800 - total flux cleaned = 0.000602759 Jy ! Component: 850 - total flux cleaned = 0.000581485 Jy ! Component: 900 - total flux cleaned = 0.000538956 Jy ! Component: 950 - total flux cleaned = 0.000497685 Jy ! Component: 1000 - total flux cleaned = 0.000456916 Jy ! Component: 1050 - total flux cleaned = 0.000377041 Jy ! Component: 1100 - total flux cleaned = 0.000396918 Jy ! Component: 1150 - total flux cleaned = 0.000358488 Jy ! Component: 1200 - total flux cleaned = 0.000377417 Jy ! Component: 1250 - total flux cleaned = 0.000340068 Jy ! Component: 1300 - total flux cleaned = 0.000248015 Jy ! Component: 1350 - total flux cleaned = 0.000157767 Jy ! Component: 1400 - total flux cleaned = 0.00010453 Jy ! Component: 1450 - total flux cleaned = 1.64896e-05 Jy ! Component: 1500 - total flux cleaned = -1.39191e-06 Jy ! Component: 1550 - total flux cleaned = -0.000103992 Jy ! Component: 1600 - total flux cleaned = -0.000137771 Jy ! Component: 1650 - total flux cleaned = -0.000187632 Jy ! Component: 1700 - total flux cleaned = -0.000253432 Jy ! Component: 1750 - total flux cleaned = -0.000318309 Jy ! Component: 1800 - total flux cleaned = -0.000366411 Jy ! Component: 1850 - total flux cleaned = -0.000461241 Jy ! Component: 1900 - total flux cleaned = -0.000461359 Jy ! Component: 1950 - total flux cleaned = -0.000461252 Jy ! Component: 2000 - total flux cleaned = -0.000537763 Jy ! Component: 2050 - total flux cleaned = -0.000567776 Jy ! Component: 2100 - total flux cleaned = -0.000597551 Jy ! Component: 2150 - total flux cleaned = -0.000627131 Jy ! Component: 2200 - total flux cleaned = -0.00064166 Jy ! Component: 2250 - total flux cleaned = -0.000670604 Jy ! Component: 2300 - total flux cleaned = -0.000742015 Jy ! Component: 2350 - total flux cleaned = -0.000713783 Jy ! Component: 2400 - total flux cleaned = -0.0007701 Jy ! Component: 2450 - total flux cleaned = -0.000839725 Jy ! Component: 2500 - total flux cleaned = -0.000894753 Jy ! Component: 2550 - total flux cleaned = -0.000935666 Jy ! Component: 2600 - total flux cleaned = -0.000935692 Jy ! Component: 2650 - total flux cleaned = -0.00100282 Jy ! Component: 2700 - total flux cleaned = -0.00105601 Jy ! Component: 2750 - total flux cleaned = -0.00112182 Jy ! Component: 2800 - total flux cleaned = -0.00113488 Jy ! Component: 2850 - total flux cleaned = -0.00118667 Jy ! Component: 2900 - total flux cleaned = -0.00123803 Jy ! Component: 2950 - total flux cleaned = -0.0013142 Jy ! Component: 3000 - total flux cleaned = -0.00130159 Jy ! Component: 3050 - total flux cleaned = -0.00138923 Jy ! Component: 3100 - total flux cleaned = -0.00143885 Jy ! Component: 3150 - total flux cleaned = -0.00148824 Jy ! Component: 3200 - total flux cleaned = -0.00154948 Jy ! Component: 3250 - total flux cleaned = -0.00159806 Jy ! Component: 3300 - total flux cleaned = -0.00167025 Jy ! Component: 3350 - total flux cleaned = -0.00171796 Jy ! Component: 3400 - total flux cleaned = -0.00175353 Jy ! Component: 3450 - total flux cleaned = -0.00178887 Jy ! Component: 3500 - total flux cleaned = -0.001859 Jy ! Component: 3550 - total flux cleaned = -0.00196338 Jy ! Component: 3600 - total flux cleaned = -0.00203236 Jy ! Component: 3650 - total flux cleaned = -0.00207803 Jy ! Component: 3700 - total flux cleaned = -0.00213491 Jy ! Component: 3750 - total flux cleaned = -0.00218006 Jy ! Component: 3800 - total flux cleaned = -0.00222494 Jy ! Component: 3850 - total flux cleaned = -0.00231396 Jy ! Component: 3900 - total flux cleaned = -0.00229179 Jy ! Component: 3950 - total flux cleaned = -0.00232485 Jy ! Component: 4000 - total flux cleaned = -0.00235771 Jy ! Component: 4050 - total flux cleaned = -0.00241202 Jy ! Total flux subtracted in 4096 components = -0.00242279 Jy ! Clean residual min=-0.000926 max=0.000678 Jy/beam ! Clean residual mean=0.000000 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.149867 Jy keep ! Adding 254 model components to the UV plane model. ! The established model now contains 317 components and 0.149867 Jy ![Exited script file: muppet] wmap "J0419-2132_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.804 x 6.697 at -3.36 degrees (North through East) ! Clean map min=-0.0012309 max=0.12982 Jy/beam ! Writing clean map to FITS file: J0419-2132_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.129819 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000181858 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.420257 0.420257 0.840514 1.68103 3.36206 6.72411 13.4482 26.8964 53.7929 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.129 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.804 x 6.697 at -3.36 degrees (North through East) ! Clean map min=-0.0012309 max=0.12982 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0419-2132_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:16:37 2017