! Started logfile: J0416-1851_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:20:44 2016 obs J0416-1851_S_2014_12_20_pus_uva.fits ! Reading UV FITS file: J0416-1851_S_2014_12_20_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.901587 visibilities/baseline/integration-bin. ! Found source: J0416-1851 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 2272 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0416-1851_S_2014_12_20_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.610923Jy sigma=0.006147 ! Fit after self-cal, rms=0.602391Jy sigma=0.006066 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.593 mas, bmaj=6.731 mas, bpa=4.706 degrees ! Estimated noise=2001.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.303427 Jy ! Component: 100 - total flux cleaned = 0.37154 Jy ! Total flux subtracted in 100 components = 0.37154 Jy ! Clean residual min=-0.019984 max=0.027413 Jy/beam ! Clean residual mean=-0.000136 rms=0.005270 Jy/beam ! Combined flux in latest and established models = 0.37154 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.37154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128755Jy sigma=0.001121 ! Fit after self-cal, rms=0.128737Jy sigma=0.001120 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.174 mas, bmaj=7.93 mas, bpa=4.291 degrees ! Estimated noise=1529.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.035853 Jy ! Component: 100 - total flux cleaned = 0.0536725 Jy ! Component: 150 - total flux cleaned = 0.0637002 Jy ! Component: 200 - total flux cleaned = 0.0695403 Jy ! Total flux subtracted in 200 components = 0.0695403 Jy ! Clean residual min=-0.023160 max=0.019726 Jy/beam ! Clean residual mean=-0.000123 rms=0.004608 Jy/beam ! Combined flux in latest and established models = 0.44108 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 41 components and 0.44108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116449Jy sigma=0.001035 ! Fit after self-cal, rms=0.116452Jy sigma=0.001035 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.86 HN 1.17 KP 1.08 ! LA 0.92 MK 0.98 NL 0.73 OV 0.99 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 1.19 KP 1.02 ! LA 0.89 MK 1.00 NL 1.25 OV 1.00 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.16 HN 1.14 KP 0.92 ! LA 0.75 MK 1.01 NL 1.55 OV 0.92 ! PT 0.99 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 1.10 KP 0.88 ! LA 0.79 MK 1.00 NL 1.07 OV 1.01 ! PT 1.01 SC 0.98 ! ! ! Fit before self-cal, rms=0.116452Jy sigma=0.001035 ! Fit after self-cal, rms=0.087850Jy sigma=0.000780 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.199 mas, bmaj=7.965 mas, bpa=4.389 degrees ! Estimated noise=1532.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00170568 Jy ! Component: 100 - total flux cleaned = -0.0019077 Jy ! Component: 150 - total flux cleaned = -0.00196691 Jy ! Component: 200 - total flux cleaned = -0.00207461 Jy ! Total flux subtracted in 200 components = -0.00207461 Jy ! Clean residual min=-0.004359 max=0.005669 Jy/beam ! Clean residual mean=-0.000011 rms=0.001221 Jy/beam ! Combined flux in latest and established models = 0.439006 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 46 components and 0.439006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087735Jy sigma=0.000779 ! Fit after self-cal, rms=0.087790Jy sigma=0.000779 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087790Jy sigma=0.000779 ! Fit after self-cal, rms=0.087844Jy sigma=0.000778 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.199 mas, bmaj=7.97 mas, bpa=4.31 degrees ! Estimated noise=1530.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00124019 Jy ! Component: 100 - total flux cleaned = -0.00139243 Jy ! Component: 150 - total flux cleaned = -0.00143783 Jy ! Component: 200 - total flux cleaned = -0.00151699 Jy ! Total flux subtracted in 200 components = -0.00151699 Jy ! Clean residual min=-0.004250 max=0.005598 Jy/beam ! Clean residual mean=-0.000012 rms=0.001198 Jy/beam ! Combined flux in latest and established models = 0.437489 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 0.437489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087782Jy sigma=0.000778 ! Fit after self-cal, rms=0.087774Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (65, -115). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0048034 Jy ! Component: 100 - total flux cleaned = 0.00707659 Jy ! Component: 150 - total flux cleaned = 0.00734124 Jy ! Component: 200 - total flux cleaned = 0.007577 Jy ! Total flux subtracted in 200 components = 0.007577 Jy ! Clean residual min=-0.004424 max=0.004196 Jy/beam ! Clean residual mean=-0.000001 rms=0.001045 Jy/beam ! Combined flux in latest and established models = 0.445066 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 73 components and 0.445066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087506Jy sigma=0.000775 ! Fit after self-cal, rms=0.087492Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087492Jy sigma=0.000775 ! Fit after self-cal, rms=0.087478Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=7.977 mas, bpa=4.229 degrees ! Estimated noise=1527.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000827867 Jy ! Component: 100 - total flux cleaned = 0.000772065 Jy ! Component: 150 - total flux cleaned = 0.000677305 Jy ! Component: 200 - total flux cleaned = 0.000634691 Jy ! Total flux subtracted in 200 components = 0.000634691 Jy ! Clean residual min=-0.004243 max=0.004059 Jy/beam ! Clean residual mean=0.000000 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.445701 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 78 components and 0.445701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087410Jy sigma=0.000774 ! Fit after self-cal, rms=0.087406Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000302118 Jy ! Component: 100 - total flux cleaned = -0.000299479 Jy ! Component: 150 - total flux cleaned = -0.000337833 Jy ! Component: 200 - total flux cleaned = -0.000338827 Jy ! Total flux subtracted in 200 components = -0.000338827 Jy ! Clean residual min=-0.004253 max=0.003989 Jy/beam ! Clean residual mean=-0.000000 rms=0.000990 Jy/beam ! Combined flux in latest and established models = 0.445362 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 78 components and 0.445362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087369Jy sigma=0.000774 ! Fit after self-cal, rms=0.087366Jy sigma=0.000774 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087366Jy sigma=0.000774 ! Fit after self-cal, rms=0.087317Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.841 mas, bmaj=18.45 mas, bpa=13.71 degrees ! Estimated noise=1852.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000414214 Jy ! Component: 100 - total flux cleaned = -0.000341512 Jy ! Component: 150 - total flux cleaned = -0.000367827 Jy ! Component: 200 - total flux cleaned = -0.000368253 Jy ! Total flux subtracted in 200 components = -0.000368253 Jy ! Clean residual min=-0.003740 max=0.004290 Jy/beam ! Clean residual mean=-0.000002 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 0.444993 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 83 components and 0.444993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087309Jy sigma=0.000774 ! Fit after self-cal, rms=0.087293Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.27576e-06 Jy ! Component: 100 - total flux cleaned = 1.61712e-05 Jy ! Component: 150 - total flux cleaned = 1.52113e-05 Jy ! Component: 200 - total flux cleaned = 3.48976e-05 Jy ! Total flux subtracted in 200 components = 3.48976e-05 Jy ! Clean residual min=-0.003683 max=0.004230 Jy/beam ! Clean residual mean=-0.000002 rms=0.001119 Jy/beam ! Combined flux in latest and established models = 0.445028 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 87 components and 0.445028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087294Jy sigma=0.000773 ! Fit after self-cal, rms=0.087280Jy sigma=0.000773 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=7.979 mas, bpa=4.196 degrees ! Estimated noise=1525.33 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.201 x 7.979 at 4.196 degrees (North through East) ! Clean map min=-0.0037642 max=0.39356 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.615 mas, bmaj=6.75 mas, bpa=4.833 degrees ! Estimated noise=2017.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.305764 Jy ! Component: 100 - total flux cleaned = 0.373634 Jy ! Component: 150 - total flux cleaned = 0.398605 Jy ! Component: 200 - total flux cleaned = 0.412224 Jy ! Total flux subtracted in 200 components = 0.412224 Jy ! Clean residual min=-0.006753 max=0.007021 Jy/beam ! Clean residual mean=-0.000036 rms=0.001850 Jy/beam ! Combined flux in latest and established models = 0.412224 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.412224 Jy ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=7.979 mas, bpa=4.196 degrees ! Estimated noise=1525.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105448 Jy ! Component: 100 - total flux cleaned = 0.0164641 Jy ! Component: 150 - total flux cleaned = 0.0205027 Jy ! Component: 200 - total flux cleaned = 0.0235276 Jy ! Total flux subtracted in 200 components = 0.0235276 Jy ! Clean residual min=-0.004235 max=0.004622 Jy/beam ! Clean residual mean=-0.000018 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.435752 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 79 components and 0.435752 Jy ! Inverting map ! Added new window around map position (28.5, -47.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040074 Jy ! Component: 100 - total flux cleaned = 0.00557431 Jy ! Component: 150 - total flux cleaned = 0.00627044 Jy ! Component: 200 - total flux cleaned = 0.00689346 Jy ! Total flux subtracted in 200 components = 0.00689346 Jy ! Clean residual min=-0.004209 max=0.004090 Jy/beam ! Clean residual mean=-0.000005 rms=0.000955 Jy/beam ! Combined flux in latest and established models = 0.442645 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 104 components and 0.442645 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.841 mas, bmaj=18.45 mas, bpa=13.71 degrees ! Estimated noise=1852.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213147 Jy ! Component: 100 - total flux cleaned = 0.0024192 Jy ! Component: 150 - total flux cleaned = 0.00258175 Jy ! Component: 200 - total flux cleaned = 0.00268871 Jy ! Total flux subtracted in 200 components = 0.00268871 Jy ! Clean residual min=-0.004186 max=0.003659 Jy/beam ! Clean residual mean=-0.000002 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 0.445334 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010072 Jy ! Component: 100 - total flux cleaned = 0.000161558 Jy ! Component: 150 - total flux cleaned = 0.000191257 Jy ! Component: 200 - total flux cleaned = 0.000191355 Jy ! Total flux subtracted in 200 components = 0.000191355 Jy ! Clean residual min=-0.004140 max=0.003599 Jy/beam ! Clean residual mean=-0.000001 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.445525 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 130 components and 0.445525 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=7.979 mas, bpa=4.196 degrees ! Estimated noise=1525.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000315247 Jy ! Component: 100 - total flux cleaned = -0.000369506 Jy ! Component: 150 - total flux cleaned = -0.000422465 Jy ! Component: 200 - total flux cleaned = -0.000518314 Jy ! Total flux subtracted in 200 components = -0.000518314 Jy ! Clean residual min=-0.003963 max=0.003779 Jy/beam ! Clean residual mean=0.000000 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.445007 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 146 components and 0.445007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087093Jy sigma=0.000772 ! Fit after self-cal, rms=0.087072Jy sigma=0.000772 wmodel J0416-1851_S_2014_12_20_pus_map.mod ! Writing 146 model components to file: J0416-1851_S_2014_12_20_pus_map.mod wobs J0416-1851_S_2014_12_20_pus_uvs.fits ! Writing UV FITS file: J0416-1851_S_2014_12_20_pus_uvs.fits wwins J0416-1851_S_2014_12_20_pus_map.win ! wwins: Wrote 3 windows to J0416-1851_S_2014_12_20_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000674377 Jy ! Component: 100 - total flux cleaned = -0.000918951 Jy ! Component: 150 - total flux cleaned = -0.00108242 Jy ! Component: 200 - total flux cleaned = -0.0014472 Jy ! Component: 250 - total flux cleaned = -0.00169443 Jy ! Component: 300 - total flux cleaned = -0.00188591 Jy ! Component: 350 - total flux cleaned = -0.00211674 Jy ! Component: 400 - total flux cleaned = -0.00225029 Jy ! Component: 450 - total flux cleaned = -0.00242443 Jy ! Component: 500 - total flux cleaned = -0.00259332 Jy ! Component: 550 - total flux cleaned = -0.00279841 Jy ! Component: 600 - total flux cleaned = -0.00303797 Jy ! Component: 650 - total flux cleaned = -0.00327218 Jy ! Component: 700 - total flux cleaned = -0.00334815 Jy ! Component: 750 - total flux cleaned = -0.00334761 Jy ! Component: 800 - total flux cleaned = -0.00334805 Jy ! Component: 850 - total flux cleaned = -0.00338396 Jy ! Component: 900 - total flux cleaned = -0.0034545 Jy ! Component: 950 - total flux cleaned = -0.00355821 Jy ! Component: 1000 - total flux cleaned = -0.00348986 Jy ! Component: 1050 - total flux cleaned = -0.00362352 Jy ! Component: 1100 - total flux cleaned = -0.0036565 Jy ! Component: 1150 - total flux cleaned = -0.00369018 Jy ! Component: 1200 - total flux cleaned = -0.00388194 Jy ! Component: 1250 - total flux cleaned = -0.00397567 Jy ! Component: 1300 - total flux cleaned = -0.00397608 Jy ! Component: 1350 - total flux cleaned = -0.0040374 Jy ! Component: 1400 - total flux cleaned = -0.00412691 Jy ! Component: 1450 - total flux cleaned = -0.00409784 Jy ! Component: 1500 - total flux cleaned = -0.00415659 Jy ! Component: 1550 - total flux cleaned = -0.0041854 Jy ! Component: 1600 - total flux cleaned = -0.00421336 Jy ! Component: 1650 - total flux cleaned = -0.00413043 Jy ! Component: 1700 - total flux cleaned = -0.00415791 Jy ! Component: 1750 - total flux cleaned = -0.00399613 Jy ! Component: 1800 - total flux cleaned = -0.00399612 Jy ! Component: 1850 - total flux cleaned = -0.00389061 Jy ! Component: 1900 - total flux cleaned = -0.00389062 Jy ! Component: 1950 - total flux cleaned = -0.0037617 Jy ! Component: 2000 - total flux cleaned = -0.0036602 Jy ! Component: 2050 - total flux cleaned = -0.00360972 Jy ! Component: 2100 - total flux cleaned = -0.0035354 Jy ! Component: 2150 - total flux cleaned = -0.00353561 Jy ! Component: 2200 - total flux cleaned = -0.00358412 Jy ! Component: 2250 - total flux cleaned = -0.00356008 Jy ! Component: 2300 - total flux cleaned = -0.00353618 Jy ! Component: 2350 - total flux cleaned = -0.00355966 Jy ! Component: 2400 - total flux cleaned = -0.00360646 Jy ! Component: 2450 - total flux cleaned = -0.00360653 Jy ! Component: 2500 - total flux cleaned = -0.00360638 Jy ! Component: 2550 - total flux cleaned = -0.00367542 Jy ! Component: 2600 - total flux cleaned = -0.00378865 Jy ! Component: 2650 - total flux cleaned = -0.00381104 Jy ! Component: 2700 - total flux cleaned = -0.00385572 Jy ! Component: 2750 - total flux cleaned = -0.00389998 Jy ! Component: 2800 - total flux cleaned = -0.00394377 Jy ! Component: 2850 - total flux cleaned = -0.00392214 Jy ! Component: 2900 - total flux cleaned = -0.00392217 Jy ! Component: 2950 - total flux cleaned = -0.00392232 Jy ! Component: 3000 - total flux cleaned = -0.00396494 Jy ! Component: 3050 - total flux cleaned = -0.00392269 Jy ! Component: 3100 - total flux cleaned = -0.00396498 Jy ! Component: 3150 - total flux cleaned = -0.00398605 Jy ! Component: 3200 - total flux cleaned = -0.00400687 Jy ! Component: 3250 - total flux cleaned = -0.00400693 Jy ! Component: 3300 - total flux cleaned = -0.00406823 Jy ! Component: 3350 - total flux cleaned = -0.00404778 Jy ! Component: 3400 - total flux cleaned = -0.0040678 Jy ! Component: 3450 - total flux cleaned = -0.00402733 Jy ! Component: 3500 - total flux cleaned = -0.00402736 Jy ! Component: 3550 - total flux cleaned = -0.00402738 Jy ! Component: 3600 - total flux cleaned = -0.00400791 Jy ! Component: 3650 - total flux cleaned = -0.00400813 Jy ! Component: 3700 - total flux cleaned = -0.00402773 Jy ! Component: 3750 - total flux cleaned = -0.00404711 Jy ! Component: 3800 - total flux cleaned = -0.00402778 Jy ! Component: 3850 - total flux cleaned = -0.00404697 Jy ! Component: 3900 - total flux cleaned = -0.00400889 Jy ! Component: 3950 - total flux cleaned = -0.00399004 Jy ! Component: 4000 - total flux cleaned = -0.00400901 Jy ! Component: 4050 - total flux cleaned = -0.00400905 Jy ! Total flux subtracted in 4096 components = -0.00397145 Jy ! Clean residual min=-0.001174 max=0.001292 Jy/beam ! Clean residual mean=0.000001 rms=0.000333 Jy/beam ! Combined flux in latest and established models = 0.441035 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 411 components and 0.441035 Jy ![Exited script file: muppet] wmap "J0416-1851_S_2014_12_20_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.201 x 7.979 at 4.196 degrees (North through East) ! Clean map min=-0.0026812 max=0.39573 Jy/beam ! Writing clean map to FITS file: J0416-1851_S_2014_12_20_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.395729 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000331741 device "J0416-1851_S_2014_12_20_pus\_map.eps/VPS" ! Attempting to open device: 'J0416-1851_S_2014_12_20_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.251491 0.251491 0.502981 1.00596 2.01193 4.02385 8.0477 16.0954 32.1908 64.3816 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.395 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.201 x 7.979 at 4.196 degrees (North through East) ! Clean map min=-0.0026812 max=0.39573 Jy/beam quit ! Quitting program ! Log file J0416-1851_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:20:49 2016