! Started logfile: J0416-1851_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:15:03 2016 obs J0416-1851_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J0416-1851_S_2014_08_05_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.594444 visibilities/baseline/integration-bin. ! Found source: J0416-1851 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 1712 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0416-1851_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.631593Jy sigma=0.005682 ! Fit after self-cal, rms=0.626399Jy sigma=0.005637 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.639 mas, bmaj=10.72 mas, bpa=-3.857 degrees ! Estimated noise=2279.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.28887 Jy ! Component: 100 - total flux cleaned = 0.351876 Jy ! Total flux subtracted in 100 components = 0.351876 Jy ! Clean residual min=-0.015102 max=0.017600 Jy/beam ! Clean residual mean=0.000014 rms=0.004405 Jy/beam ! Combined flux in latest and established models = 0.351876 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.351876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106783Jy sigma=0.000885 ! Fit after self-cal, rms=0.106778Jy sigma=0.000885 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.354 mas, bmaj=11.88 mas, bpa=-3.453 degrees ! Estimated noise=1934.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0262003 Jy ! Component: 100 - total flux cleaned = 0.0410577 Jy ! Component: 150 - total flux cleaned = 0.0499588 Jy ! Component: 200 - total flux cleaned = 0.055371 Jy ! Total flux subtracted in 200 components = 0.055371 Jy ! Clean residual min=-0.010789 max=0.011382 Jy/beam ! Clean residual mean=-0.000010 rms=0.002653 Jy/beam ! Combined flux in latest and established models = 0.407247 Jy ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 73 components and 0.407247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098914Jy sigma=0.000830 ! Fit after self-cal, rms=0.098876Jy sigma=0.000830 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 0.94 KP 1.05 ! LA 1.10 MK 1.00* NL 0.98 OV 0.96 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.02 KP 1.01 ! LA 1.05 MK 1.00* NL 1.07 OV 1.01 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.16 HN 1.06 KP 0.88 ! LA 0.84 MK 1.00* NL 1.00 OV 0.94 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.02 KP 0.87 ! LA 0.80 MK 1.00* NL 1.07 OV 1.04 ! PT 1.03 SC 1.00 ! ! ! Fit before self-cal, rms=0.098876Jy sigma=0.000830 ! Fit after self-cal, rms=0.086174Jy sigma=0.000754 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.357 mas, bmaj=11.96 mas, bpa=-3.407 degrees ! Estimated noise=1921.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000973556 Jy ! Component: 100 - total flux cleaned = -0.00097168 Jy ! Component: 150 - total flux cleaned = -0.00101566 Jy ! Component: 200 - total flux cleaned = -0.00108897 Jy ! Total flux subtracted in 200 components = -0.00108897 Jy ! Clean residual min=-0.005428 max=0.005145 Jy/beam ! Clean residual mean=0.000001 rms=0.001217 Jy/beam ! Combined flux in latest and established models = 0.406158 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 89 components and 0.406158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086120Jy sigma=0.000753 ! Fit after self-cal, rms=0.086104Jy sigma=0.000753 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086104Jy sigma=0.000753 ! Fit after self-cal, rms=0.086088Jy sigma=0.000753 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.357 mas, bmaj=11.96 mas, bpa=-3.384 degrees ! Estimated noise=1920.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000636866 Jy ! Component: 100 - total flux cleaned = -0.000751969 Jy ! Component: 150 - total flux cleaned = -0.000847233 Jy ! Component: 200 - total flux cleaned = -0.000900936 Jy ! Total flux subtracted in 200 components = -0.000900936 Jy ! Clean residual min=-0.005215 max=0.004958 Jy/beam ! Clean residual mean=0.000002 rms=0.001182 Jy/beam ! Combined flux in latest and established models = 0.405257 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 96 components and 0.405257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086058Jy sigma=0.000753 ! Fit after self-cal, rms=0.086054Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.46681e-05 Jy ! Component: 100 - total flux cleaned = -2.65724e-05 Jy ! Component: 150 - total flux cleaned = -2.83266e-05 Jy ! Component: 200 - total flux cleaned = -5.0366e-05 Jy ! Total flux subtracted in 200 components = -5.0366e-05 Jy ! Clean residual min=-0.005081 max=0.004902 Jy/beam ! Clean residual mean=0.000002 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 0.405207 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 99 components and 0.405207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086039Jy sigma=0.000753 ! Fit after self-cal, rms=0.086038Jy sigma=0.000753 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086038Jy sigma=0.000753 ! Fit after self-cal, rms=0.086053Jy sigma=0.000753 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.356 mas, bmaj=11.97 mas, bpa=-3.372 degrees ! Estimated noise=1920.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000425621 Jy ! Component: 100 - total flux cleaned = -0.000473848 Jy ! Component: 150 - total flux cleaned = -0.000538599 Jy ! Component: 200 - total flux cleaned = -0.000614232 Jy ! Total flux subtracted in 200 components = -0.000614232 Jy ! Clean residual min=-0.004947 max=0.004789 Jy/beam ! Clean residual mean=0.000002 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 0.404592 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 101 components and 0.404592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086040Jy sigma=0.000752 ! Fit after self-cal, rms=0.086039Jy sigma=0.000752 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.24813e-05 Jy ! Component: 100 - total flux cleaned = -0.000103209 Jy ! Component: 150 - total flux cleaned = -0.000121154 Jy ! Component: 200 - total flux cleaned = -0.000137124 Jy ! Total flux subtracted in 200 components = -0.000137124 Jy ! Clean residual min=-0.004893 max=0.004757 Jy/beam ! Clean residual mean=0.000003 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.404455 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 104 components and 0.404455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086032Jy sigma=0.000752 ! Fit after self-cal, rms=0.086031Jy sigma=0.000752 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086031Jy sigma=0.000752 ! Fit after self-cal, rms=0.086036Jy sigma=0.000752 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.511 mas, bmaj=16.28 mas, bpa=-11.84 degrees ! Estimated noise=2289.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165342 Jy ! Component: 100 - total flux cleaned = -0.000199893 Jy ! Component: 150 - total flux cleaned = -0.000230425 Jy ! Component: 200 - total flux cleaned = -0.000254802 Jy ! Total flux subtracted in 200 components = -0.000254802 Jy ! Clean residual min=-0.004798 max=0.004708 Jy/beam ! Clean residual mean=0.000005 rms=0.001318 Jy/beam ! Combined flux in latest and established models = 0.4042 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 106 components and 0.4042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086029Jy sigma=0.000752 ! Fit after self-cal, rms=0.086027Jy sigma=0.000752 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.29798e-05 Jy ! Component: 100 - total flux cleaned = -7.2889e-05 Jy ! Component: 150 - total flux cleaned = -7.149e-05 Jy ! Component: 200 - total flux cleaned = -7.04863e-05 Jy ! Total flux subtracted in 200 components = -7.04863e-05 Jy ! Clean residual min=-0.004749 max=0.004718 Jy/beam ! Clean residual mean=0.000005 rms=0.001311 Jy/beam ! Combined flux in latest and established models = 0.40413 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 107 components and 0.40413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086024Jy sigma=0.000752 ! Fit after self-cal, rms=0.086023Jy sigma=0.000752 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.356 mas, bmaj=11.97 mas, bpa=-3.369 degrees ! Estimated noise=1920.62 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.356 x 11.97 at -3.369 degrees (North through East) ! Clean map min=-0.0046628 max=0.37246 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.626 mas, bmaj=10.78 mas, bpa=-3.675 degrees ! Estimated noise=2262.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.286619 Jy ! Component: 100 - total flux cleaned = 0.349246 Jy ! Component: 150 - total flux cleaned = 0.365987 Jy ! Component: 200 - total flux cleaned = 0.376015 Jy ! Total flux subtracted in 200 components = 0.376015 Jy ! Clean residual min=-0.007500 max=0.006965 Jy/beam ! Clean residual mean=0.000012 rms=0.001932 Jy/beam ! Combined flux in latest and established models = 0.376015 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.376015 Jy ! Inverting map and beam ! Estimated beam: bmin=4.356 mas, bmaj=11.97 mas, bpa=-3.369 degrees ! Estimated noise=1920.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121491 Jy ! Component: 100 - total flux cleaned = 0.0190219 Jy ! Component: 150 - total flux cleaned = 0.0230713 Jy ! Component: 200 - total flux cleaned = 0.025474 Jy ! Total flux subtracted in 200 components = 0.025474 Jy ! Clean residual min=-0.005803 max=0.004673 Jy/beam ! Clean residual mean=0.000006 rms=0.001242 Jy/beam ! Combined flux in latest and established models = 0.401489 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 66 components and 0.401489 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.511 mas, bmaj=16.28 mas, bpa=-11.84 degrees ! Estimated noise=2289.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230013 Jy ! Component: 100 - total flux cleaned = 0.00250062 Jy ! Component: 150 - total flux cleaned = 0.00262407 Jy ! Component: 200 - total flux cleaned = 0.00269638 Jy ! Total flux subtracted in 200 components = 0.00269638 Jy ! Clean residual min=-0.005360 max=0.004931 Jy/beam ! Clean residual mean=0.000004 rms=0.001376 Jy/beam ! Combined flux in latest and established models = 0.404185 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000102333 Jy ! Component: 100 - total flux cleaned = 0.000162875 Jy ! Component: 150 - total flux cleaned = 0.000218337 Jy ! Component: 200 - total flux cleaned = 0.000291252 Jy ! Total flux subtracted in 200 components = 0.000291252 Jy ! Clean residual min=-0.005113 max=0.004912 Jy/beam ! Clean residual mean=0.000003 rms=0.001347 Jy/beam ! Combined flux in latest and established models = 0.404477 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 75 components and 0.404477 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.356 mas, bmaj=11.97 mas, bpa=-3.369 degrees ! Estimated noise=1920.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000210852 Jy ! Component: 100 - total flux cleaned = -0.000211923 Jy ! Component: 150 - total flux cleaned = -0.000212335 Jy ! Component: 200 - total flux cleaned = -0.000229482 Jy ! Total flux subtracted in 200 components = -0.000229482 Jy ! Clean residual min=-0.005149 max=0.004678 Jy/beam ! Clean residual mean=0.000002 rms=0.001169 Jy/beam ! Combined flux in latest and established models = 0.404247 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 91 components and 0.404247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086083Jy sigma=0.000753 ! Fit after self-cal, rms=0.086079Jy sigma=0.000753 wmodel J0416-1851_S_2014_08_05_pus_map.mod ! Writing 91 model components to file: J0416-1851_S_2014_08_05_pus_map.mod wobs J0416-1851_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J0416-1851_S_2014_08_05_pus_uvs.fits wwins J0416-1851_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J0416-1851_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110579 Jy ! Component: 100 - total flux cleaned = -0.00223332 Jy ! Component: 150 - total flux cleaned = -0.00343768 Jy ! Component: 200 - total flux cleaned = -0.00393024 Jy ! Component: 250 - total flux cleaned = -0.00432813 Jy ! Component: 300 - total flux cleaned = -0.00459482 Jy ! Component: 350 - total flux cleaned = -0.00490158 Jy ! Component: 400 - total flux cleaned = -0.00504819 Jy ! Component: 450 - total flux cleaned = -0.0049114 Jy ! Component: 500 - total flux cleaned = -0.0047365 Jy ! Component: 550 - total flux cleaned = -0.00456922 Jy ! Component: 600 - total flux cleaned = -0.00461035 Jy ! Component: 650 - total flux cleaned = -0.00461003 Jy ! Component: 700 - total flux cleaned = -0.00457144 Jy ! Component: 750 - total flux cleaned = -0.00464601 Jy ! Component: 800 - total flux cleaned = -0.00453667 Jy ! Component: 850 - total flux cleaned = -0.00428895 Jy ! Component: 900 - total flux cleaned = -0.00408189 Jy ! Component: 950 - total flux cleaned = -0.00381313 Jy ! Component: 1000 - total flux cleaned = -0.00351809 Jy ! Component: 1050 - total flux cleaned = -0.00339004 Jy ! Component: 1100 - total flux cleaned = -0.00323239 Jy ! Component: 1150 - total flux cleaned = -0.00301607 Jy ! Component: 1200 - total flux cleaned = -0.00283489 Jy ! Component: 1250 - total flux cleaned = -0.00277574 Jy ! Component: 1300 - total flux cleaned = -0.00268835 Jy ! Component: 1350 - total flux cleaned = -0.00251833 Jy ! Component: 1400 - total flux cleaned = -0.00243503 Jy ! Component: 1450 - total flux cleaned = -0.00240792 Jy ! Component: 1500 - total flux cleaned = -0.00238069 Jy ! Component: 1550 - total flux cleaned = -0.00227447 Jy ! Component: 1600 - total flux cleaned = -0.00222254 Jy ! Component: 1650 - total flux cleaned = -0.00227353 Jy ! Component: 1700 - total flux cleaned = -0.00214778 Jy ! Component: 1750 - total flux cleaned = -0.00207331 Jy ! Component: 1800 - total flux cleaned = -0.00204873 Jy ! Component: 1850 - total flux cleaned = -0.00187993 Jy ! Component: 1900 - total flux cleaned = -0.00171364 Jy ! Component: 1950 - total flux cleaned = -0.00168995 Jy ! Component: 2000 - total flux cleaned = -0.00155018 Jy ! Component: 2050 - total flux cleaned = -0.00141189 Jy ! Component: 2100 - total flux cleaned = -0.0012975 Jy ! Component: 2150 - total flux cleaned = -0.00113883 Jy ! Component: 2200 - total flux cleaned = -0.00104906 Jy ! Component: 2250 - total flux cleaned = -0.000915157 Jy ! Component: 2300 - total flux cleaned = -0.00082624 Jy ! Component: 2350 - total flux cleaned = -0.000694105 Jy ! Component: 2400 - total flux cleaned = -0.000628275 Jy ! Component: 2450 - total flux cleaned = -0.000562793 Jy ! Component: 2500 - total flux cleaned = -0.000432919 Jy ! Component: 2550 - total flux cleaned = -0.00032533 Jy ! Component: 2600 - total flux cleaned = -0.0002827 Jy ! Component: 2650 - total flux cleaned = -0.00019736 Jy ! Component: 2700 - total flux cleaned = -0.000112705 Jy ! Component: 2750 - total flux cleaned = -4.9527e-05 Jy ! Component: 2800 - total flux cleaned = 1.34147e-05 Jy ! Component: 2850 - total flux cleaned = 0.000159436 Jy ! Component: 2900 - total flux cleaned = 0.000221646 Jy ! Component: 2950 - total flux cleaned = 0.000304427 Jy ! Component: 3000 - total flux cleaned = 0.000345634 Jy ! Component: 3050 - total flux cleaned = 0.000386707 Jy ! Component: 3100 - total flux cleaned = 0.000386622 Jy ! Component: 3150 - total flux cleaned = 0.000386536 Jy ! Component: 3200 - total flux cleaned = 0.0003043 Jy ! Component: 3250 - total flux cleaned = 0.000263163 Jy ! Component: 3300 - total flux cleaned = 0.000263202 Jy ! Component: 3350 - total flux cleaned = 0.00020144 Jy ! Component: 3400 - total flux cleaned = 0.000160133 Jy ! Component: 3450 - total flux cleaned = 0.000139491 Jy ! Component: 3500 - total flux cleaned = 0.000139533 Jy ! Component: 3550 - total flux cleaned = 9.83995e-05 Jy ! Component: 3600 - total flux cleaned = 7.766e-05 Jy ! Component: 3650 - total flux cleaned = 5.69521e-05 Jy ! Component: 3700 - total flux cleaned = 5.67523e-05 Jy ! Component: 3750 - total flux cleaned = -2.62348e-05 Jy ! Component: 3800 - total flux cleaned = -4.68911e-05 Jy ! Component: 3850 - total flux cleaned = -8.87018e-05 Jy ! Component: 3900 - total flux cleaned = -0.00013053 Jy ! Component: 3950 - total flux cleaned = -0.000193326 Jy ! Component: 4000 - total flux cleaned = -0.000214393 Jy ! Component: 4050 - total flux cleaned = -0.000256634 Jy ! Total flux subtracted in 4096 components = -0.000299173 Jy ! Clean residual min=-0.001531 max=0.001820 Jy/beam ! Clean residual mean=0.000005 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.403948 Jy keep ! Adding 234 model components to the UV plane model. ! The established model now contains 325 components and 0.403948 Jy ![Exited script file: muppet] wmap "J0416-1851_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.356 x 11.97 at -3.369 degrees (North through East) ! Clean map min=-0.003139 max=0.37036 Jy/beam ! Writing clean map to FITS file: J0416-1851_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.370358 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000431678 device "J0416-1851_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0416-1851_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.349671 0.349671 0.699342 1.39868 2.79737 5.59473 11.1895 22.3789 44.7579 89.5157 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.37 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.356 x 11.97 at -3.369 degrees (North through East) ! Clean map min=-0.003139 max=0.37036 Jy/beam quit ! Quitting program ! Log file J0416-1851_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:15:08 2016