! Started logfile: J0414+3418_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:16:28 2017 obs J0414+3418_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0414+3418_S_2014_01_04_pus_uva.fits ! AN table 1: 98 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0414+3418 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 8232 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0414+3418_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.700473Jy sigma=0.010092 ! Fit after self-cal, rms=0.559129Jy sigma=0.007475 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.356 mas, bmaj=4.17 mas, bpa=1.474 degrees ! Estimated noise=821.321 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.630017 Jy ! Component: 100 - total flux cleaned = 0.905866 Jy ! Total flux subtracted in 100 components = 0.905866 Jy ! Clean residual min=-0.075936 max=0.142346 Jy/beam ! Clean residual mean=0.000070 rms=0.024985 Jy/beam ! Combined flux in latest and established models = 0.905866 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.905866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.416371Jy sigma=0.005764 ! Fit after self-cal, rms=0.415623Jy sigma=0.005759 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.081 mas, bmaj=5.157 mas, bpa=0.2965 degrees ! Estimated noise=558.359 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.242428 Jy ! Component: 100 - total flux cleaned = 0.37996 Jy ! Component: 150 - total flux cleaned = 0.467077 Jy ! Component: 200 - total flux cleaned = 0.525181 Jy ! Total flux subtracted in 200 components = 0.525181 Jy ! Clean residual min=-0.061475 max=0.091382 Jy/beam ! Clean residual mean=0.000119 rms=0.018862 Jy/beam ! Combined flux in latest and established models = 1.43105 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 74 components and 1.43105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217057Jy sigma=0.003129 ! Fit after self-cal, rms=0.216882Jy sigma=0.003123 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00* KP 1.00* LA 0.94 ! MK 1.19 NL 0.98 OV 0.93 PT 0.93 ! SC 1.13 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.00* KP 1.00* LA 0.91 ! MK 1.17 NL 1.05 OV 0.96 PT 0.91 ! SC 1.17 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* KP 1.00* LA 0.75 ! MK 1.18 NL 1.02 OV 0.90 PT 0.89 ! SC 1.15 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.32 FD 1.00* KP 1.00* LA 0.81 ! MK 1.15 NL 1.09 OV 0.97 PT 0.94 ! SC 1.07 ! ! ! Fit before self-cal, rms=0.216882Jy sigma=0.003123 ! Fit after self-cal, rms=0.126697Jy sigma=0.001612 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.282 mas, bmaj=5.46 mas, bpa=0.6755 degrees ! Estimated noise=585.926 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, -7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0411756 Jy ! Component: 100 - total flux cleaned = 0.0422851 Jy ! Component: 150 - total flux cleaned = 0.0430642 Jy ! Component: 200 - total flux cleaned = 0.043786 Jy ! Total flux subtracted in 200 components = 0.043786 Jy ! Clean residual min=-0.020177 max=0.023654 Jy/beam ! Clean residual mean=0.000003 rms=0.005768 Jy/beam ! Combined flux in latest and established models = 1.47483 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 98 components and 1.47483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106763Jy sigma=0.001286 ! Fit after self-cal, rms=0.104942Jy sigma=0.001260 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104942Jy sigma=0.001260 ! Fit after self-cal, rms=0.098055Jy sigma=0.001221 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.169 mas, bmaj=5.314 mas, bpa=-7.736 degrees ! Estimated noise=569.099 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165018 Jy ! Component: 100 - total flux cleaned = 0.0218835 Jy ! Component: 150 - total flux cleaned = 0.0243007 Jy ! Component: 200 - total flux cleaned = 0.0263237 Jy ! Total flux subtracted in 200 components = 0.0263237 Jy ! Clean residual min=-0.016442 max=0.020960 Jy/beam ! Clean residual mean=0.000028 rms=0.004534 Jy/beam ! Combined flux in latest and established models = 1.50116 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 112 components and 1.50116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094031Jy sigma=0.001175 ! Fit after self-cal, rms=0.093735Jy sigma=0.001170 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, 24.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0176062 Jy ! Component: 100 - total flux cleaned = 0.0230028 Jy ! Component: 150 - total flux cleaned = 0.0282557 Jy ! Component: 200 - total flux cleaned = 0.0331818 Jy ! Total flux subtracted in 200 components = 0.0331818 Jy ! Clean residual min=-0.013918 max=0.014329 Jy/beam ! Clean residual mean=0.000034 rms=0.003605 Jy/beam ! Combined flux in latest and established models = 1.53434 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 133 components and 1.53434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090245Jy sigma=0.001103 ! Fit after self-cal, rms=0.090204Jy sigma=0.001101 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090204Jy sigma=0.001101 ! Fit after self-cal, rms=0.087419Jy sigma=0.001086 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.1 mas, bmaj=5.256 mas, bpa=-12.06 degrees ! Estimated noise=557.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00522103 Jy ! Component: 100 - total flux cleaned = 0.00982381 Jy ! Component: 150 - total flux cleaned = 0.0134711 Jy ! Component: 200 - total flux cleaned = 0.0160719 Jy ! Total flux subtracted in 200 components = 0.0160719 Jy ! Clean residual min=-0.010893 max=0.011356 Jy/beam ! Clean residual mean=0.000040 rms=0.003021 Jy/beam ! Combined flux in latest and established models = 1.55041 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 151 components and 1.55041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085714Jy sigma=0.001066 ! Fit after self-cal, rms=0.085691Jy sigma=0.001064 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239238 Jy ! Component: 100 - total flux cleaned = 0.00566354 Jy ! Component: 150 - total flux cleaned = 0.00822707 Jy ! Component: 200 - total flux cleaned = 0.00963156 Jy ! Total flux subtracted in 200 components = 0.00963156 Jy ! Clean residual min=-0.010467 max=0.010913 Jy/beam ! Clean residual mean=0.000040 rms=0.002875 Jy/beam ! Combined flux in latest and established models = 1.56004 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 159 components and 1.56004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085004Jy sigma=0.001057 ! Fit after self-cal, rms=0.085020Jy sigma=0.001056 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085020Jy sigma=0.001056 ! Fit after self-cal, rms=0.084182Jy sigma=0.001049 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.847 mas, bmaj=9.81 mas, bpa=5.398 degrees ! Estimated noise=623.646 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00733372 Jy ! Component: 100 - total flux cleaned = 0.0100808 Jy ! Component: 150 - total flux cleaned = 0.0126339 Jy ! Component: 200 - total flux cleaned = 0.0148544 Jy ! Total flux subtracted in 200 components = 0.0148544 Jy ! Clean residual min=-0.013238 max=0.013462 Jy/beam ! Clean residual mean=0.000080 rms=0.003838 Jy/beam ! Combined flux in latest and established models = 1.57489 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 184 components and 1.57489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083759Jy sigma=0.001042 ! Fit after self-cal, rms=0.083714Jy sigma=0.001041 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154833 Jy ! Component: 100 - total flux cleaned = 0.00338207 Jy ! Component: 150 - total flux cleaned = 0.00496179 Jy ! Component: 200 - total flux cleaned = 0.0059482 Jy ! Total flux subtracted in 200 components = 0.0059482 Jy ! Clean residual min=-0.012341 max=0.013384 Jy/beam ! Clean residual mean=0.000078 rms=0.003724 Jy/beam ! Combined flux in latest and established models = 1.58084 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 197 components and 1.58084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083615Jy sigma=0.001040 ! Fit after self-cal, rms=0.083604Jy sigma=0.001039 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.112 mas, bmaj=5.254 mas, bpa=-10.98 degrees ! Estimated noise=558.241 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.112 x 5.254 at -10.98 degrees (North through East) ! Clean map min=-0.015587 max=0.76612 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083604Jy sigma=0.001039 ! Fit after self-cal, rms=0.080938Jy sigma=0.000878 ! Inverting map and beam ! Estimated beam: bmin=4.147 mas, bmaj=5.275 mas, bpa=-8.602 degrees ! Estimated noise=562.694 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355 Jy ! Component: 100 - total flux cleaned = 0.00546382 Jy ! Component: 150 - total flux cleaned = 0.00600524 Jy ! Component: 200 - total flux cleaned = 0.00600684 Jy ! Total flux subtracted in 200 components = 0.00600684 Jy ! Clean residual min=-0.009453 max=0.008599 Jy/beam ! Clean residual mean=0.000037 rms=0.002376 Jy/beam ! Combined flux in latest and established models = 1.58685 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 217 components and 1.58685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080249Jy sigma=0.000870 ! Fit after self-cal, rms=0.080251Jy sigma=0.000870 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196082 Jy ! Component: 100 - total flux cleaned = 0.00249577 Jy ! Component: 150 - total flux cleaned = 0.00278856 Jy ! Component: 200 - total flux cleaned = 0.00306491 Jy ! Total flux subtracted in 200 components = 0.00306491 Jy ! Clean residual min=-0.009124 max=0.008543 Jy/beam ! Clean residual mean=0.000037 rms=0.002323 Jy/beam ! Combined flux in latest and established models = 1.58991 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 227 components and 1.58991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079903Jy sigma=0.000867 ! Fit after self-cal, rms=0.079915Jy sigma=0.000866 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079915Jy sigma=0.000866 ! Fit after self-cal, rms=0.079794Jy sigma=0.000864 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.371 mas, bmaj=4.251 mas, bpa=-8.883 degrees ! Estimated noise=852.315 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.658055 Jy ! Component: 100 - total flux cleaned = 0.934284 Jy ! Component: 150 - total flux cleaned = 1.09639 Jy ! Component: 200 - total flux cleaned = 1.19915 Jy ! Total flux subtracted in 200 components = 1.19915 Jy ! Clean residual min=-0.042250 max=0.055749 Jy/beam ! Clean residual mean=0.000010 rms=0.011882 Jy/beam ! Combined flux in latest and established models = 1.19915 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 1.19915 Jy ! Inverting map and beam ! Estimated beam: bmin=4.163 mas, bmaj=5.286 mas, bpa=-7.261 degrees ! Estimated noise=564.345 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103819 Jy ! Component: 100 - total flux cleaned = 0.169131 Jy ! Component: 150 - total flux cleaned = 0.21427 Jy ! Component: 200 - total flux cleaned = 0.247922 Jy ! Total flux subtracted in 200 components = 0.247922 Jy ! Clean residual min=-0.019412 max=0.025533 Jy/beam ! Clean residual mean=0.000045 rms=0.006545 Jy/beam ! Combined flux in latest and established models = 1.44707 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 99 components and 1.44707 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.856 mas, bmaj=9.822 mas, bpa=6.011 degrees ! Estimated noise=624.057 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0396823 Jy ! Component: 100 - total flux cleaned = 0.0658165 Jy ! Component: 150 - total flux cleaned = 0.084847 Jy ! Component: 200 - total flux cleaned = 0.0966888 Jy ! Total flux subtracted in 200 components = 0.0966888 Jy ! Clean residual min=-0.016691 max=0.015363 Jy/beam ! Clean residual mean=0.000080 rms=0.005270 Jy/beam ! Combined flux in latest and established models = 1.54376 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00962348 Jy ! Component: 100 - total flux cleaned = 0.0172773 Jy ! Component: 150 - total flux cleaned = 0.0241287 Jy ! Component: 200 - total flux cleaned = 0.0299437 Jy ! Total flux subtracted in 200 components = 0.0299437 Jy ! Clean residual min=-0.013596 max=0.012350 Jy/beam ! Clean residual mean=0.000073 rms=0.004000 Jy/beam ! Combined flux in latest and established models = 1.5737 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 156 components and 1.5737 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.163 mas, bmaj=5.286 mas, bpa=-7.261 degrees ! Estimated noise=564.345 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00641669 Jy ! Component: 100 - total flux cleaned = 0.00763735 Jy ! Component: 150 - total flux cleaned = 0.00949008 Jy ! Component: 200 - total flux cleaned = 0.0117778 Jy ! Total flux subtracted in 200 components = 0.0117778 Jy ! Clean residual min=-0.009977 max=0.012451 Jy/beam ! Clean residual mean=0.000036 rms=0.002766 Jy/beam ! Combined flux in latest and established models = 1.58548 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 176 components and 1.58548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084186Jy sigma=0.000914 ! Fit after self-cal, rms=0.083901Jy sigma=0.000909 wmodel J0414+3418_S_2014_01_04_pus_map.mod ! Writing 176 model components to file: J0414+3418_S_2014_01_04_pus_map.mod wobs J0414+3418_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0414+3418_S_2014_01_04_pus_uvs.fits wwins J0414+3418_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0414+3418_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347181 Jy ! Component: 100 - total flux cleaned = 0.00469429 Jy ! Component: 150 - total flux cleaned = 0.00598906 Jy ! Component: 200 - total flux cleaned = 0.00750604 Jy ! Component: 250 - total flux cleaned = 0.00835077 Jy ! Component: 300 - total flux cleaned = 0.00929331 Jy ! Component: 350 - total flux cleaned = 0.0100626 Jy ! Component: 400 - total flux cleaned = 0.0105545 Jy ! Component: 450 - total flux cleaned = 0.0111462 Jy ! Component: 500 - total flux cleaned = 0.0113698 Jy ! Component: 550 - total flux cleaned = 0.011365 Jy ! Component: 600 - total flux cleaned = 0.0114626 Jy ! Component: 650 - total flux cleaned = 0.0113609 Jy ! Component: 700 - total flux cleaned = 0.0113613 Jy ! Component: 750 - total flux cleaned = 0.0111761 Jy ! Component: 800 - total flux cleaned = 0.01118 Jy ! Component: 850 - total flux cleaned = 0.0113515 Jy ! Component: 900 - total flux cleaned = 0.0114366 Jy ! Component: 950 - total flux cleaned = 0.0115201 Jy ! Component: 1000 - total flux cleaned = 0.0119894 Jy ! Component: 1050 - total flux cleaned = 0.0122162 Jy ! Component: 1100 - total flux cleaned = 0.0122908 Jy ! Component: 1150 - total flux cleaned = 0.012578 Jy ! Component: 1200 - total flux cleaned = 0.0128568 Jy ! Component: 1250 - total flux cleaned = 0.0131283 Jy ! Component: 1300 - total flux cleaned = 0.013654 Jy ! Component: 1350 - total flux cleaned = 0.013973 Jy ! Component: 1400 - total flux cleaned = 0.0142843 Jy ! Component: 1450 - total flux cleaned = 0.0146477 Jy ! Component: 1500 - total flux cleaned = 0.0148849 Jy ! Component: 1550 - total flux cleaned = 0.015232 Jy ! Component: 1600 - total flux cleaned = 0.0154563 Jy ! Component: 1650 - total flux cleaned = 0.015897 Jy ! Component: 1700 - total flux cleaned = 0.0161121 Jy ! Component: 1750 - total flux cleaned = 0.0162175 Jy ! Component: 1800 - total flux cleaned = 0.0165256 Jy ! Component: 1850 - total flux cleaned = 0.0166752 Jy ! Component: 1900 - total flux cleaned = 0.0169703 Jy ! Component: 1950 - total flux cleaned = 0.0170655 Jy ! Component: 2000 - total flux cleaned = 0.0172065 Jy ! Component: 2050 - total flux cleaned = 0.0172994 Jy ! Component: 2100 - total flux cleaned = 0.0173451 Jy ! Component: 2150 - total flux cleaned = 0.0174786 Jy ! Component: 2200 - total flux cleaned = 0.0176534 Jy ! Component: 2250 - total flux cleaned = 0.0176536 Jy ! Component: 2300 - total flux cleaned = 0.017863 Jy ! Component: 2350 - total flux cleaned = 0.017822 Jy ! Component: 2400 - total flux cleaned = 0.0179025 Jy ! Component: 2450 - total flux cleaned = 0.0180608 Jy ! Component: 2500 - total flux cleaned = 0.0181777 Jy ! Component: 2550 - total flux cleaned = 0.0182927 Jy ! Component: 2600 - total flux cleaned = 0.0183301 Jy ! Component: 2650 - total flux cleaned = 0.0183669 Jy ! Component: 2700 - total flux cleaned = 0.0184756 Jy ! Component: 2750 - total flux cleaned = 0.0186186 Jy ! Component: 2800 - total flux cleaned = 0.018794 Jy ! Component: 2850 - total flux cleaned = 0.0189324 Jy ! Component: 2900 - total flux cleaned = 0.0191021 Jy ! Component: 2950 - total flux cleaned = 0.0192354 Jy ! Component: 3000 - total flux cleaned = 0.0192688 Jy ! Component: 3050 - total flux cleaned = 0.0194968 Jy ! Component: 3100 - total flux cleaned = 0.0196246 Jy ! Component: 3150 - total flux cleaned = 0.0195926 Jy ! Component: 3200 - total flux cleaned = 0.0196244 Jy ! Component: 3250 - total flux cleaned = 0.019717 Jy ! Component: 3300 - total flux cleaned = 0.0197778 Jy ! Component: 3350 - total flux cleaned = 0.0197478 Jy ! Component: 3400 - total flux cleaned = 0.0197777 Jy ! Component: 3450 - total flux cleaned = 0.0197781 Jy ! Component: 3500 - total flux cleaned = 0.0198648 Jy ! Component: 3550 - total flux cleaned = 0.019979 Jy ! Component: 3600 - total flux cleaned = 0.0200632 Jy ! Component: 3650 - total flux cleaned = 0.0201748 Jy ! Component: 3700 - total flux cleaned = 0.0201748 Jy ! Component: 3750 - total flux cleaned = 0.0202567 Jy ! Component: 3800 - total flux cleaned = 0.0203107 Jy ! Component: 3850 - total flux cleaned = 0.0203909 Jy ! Component: 3900 - total flux cleaned = 0.0204964 Jy ! Component: 3950 - total flux cleaned = 0.0204965 Jy ! Component: 4000 - total flux cleaned = 0.0205739 Jy ! Component: 4050 - total flux cleaned = 0.0206761 Jy ! Total flux subtracted in 4096 components = 0.0206005 Jy ! Clean residual min=-0.001459 max=0.001478 Jy/beam ! Clean residual mean=0.000005 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 1.60608 Jy keep ! Adding 263 model components to the UV plane model. ! The established model now contains 436 components and 1.60608 Jy ![Exited script file: muppet] wmap "J0414+3418_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.163 x 5.286 at -7.261 degrees (North through East) ! Clean map min=-0.0095775 max=0.78135 Jy/beam ! Writing clean map to FITS file: J0414+3418_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.781353 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000402988 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.154727 0.154727 0.309454 0.618909 1.23782 2.47564 4.95127 9.90254 19.8051 39.6102 79.2203 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.781 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.163 x 5.286 at -7.261 degrees (North through East) ! Clean map min=-0.0095775 max=0.78135 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0414+3418_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:16:33 2017