! Started logfile: J0414+053A_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:14:57 2016 obs J0414+053A_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J0414+053A_S_2014_08_05_pus_uva.fits ! AN table 1: 124 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.682079 visibilities/baseline/integration-bin. ! Found source: J0414+053A ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 15224 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0414+053A_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 219 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 219 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 219 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 219 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.935187Jy sigma=0.010300 ! Fit after self-cal, rms=0.850023Jy sigma=0.009371 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.557 mas, bmaj=9.407 mas, bpa=18.29 degrees ! Estimated noise=821.487 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.125679 Jy ! Component: 100 - total flux cleaned = 0.167065 Jy ! Total flux subtracted in 100 components = 0.167065 Jy ! Clean residual min=-0.028860 max=0.032953 Jy/beam ! Clean residual mean=-0.000061 rms=0.007299 Jy/beam ! Combined flux in latest and established models = 0.167065 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.167065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185087Jy sigma=0.001942 ! Fit after self-cal, rms=0.184653Jy sigma=0.001938 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.337 mas, bmaj=10.37 mas, bpa=18.01 degrees ! Estimated noise=527.791 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0305586 Jy ! Component: 100 - total flux cleaned = 0.0485125 Jy ! Component: 150 - total flux cleaned = 0.0603492 Jy ! Component: 200 - total flux cleaned = 0.0683207 Jy ! Total flux subtracted in 200 components = 0.0683207 Jy ! Clean residual min=-0.031807 max=0.042511 Jy/beam ! Clean residual mean=0.000084 rms=0.008971 Jy/beam ! Combined flux in latest and established models = 0.235385 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 39 components and 0.235385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179651Jy sigma=0.001871 ! Fit after self-cal, rms=0.179412Jy sigma=0.001867 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.67 HN 1.38 KP 1.01 ! LA 1.28 MK 1.00* NL 1.10 OV 1.23 ! PT 0.75 SC 0.94 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.50 FD 0.79 HN 0.71 KP 0.95 ! LA 1.07 MK 1.00* NL 1.31 OV 1.74 ! PT 0.79 SC 0.97 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.75 FD 0.95 HN 0.85 KP 1.05 ! LA 0.97 MK 1.00* NL 1.09 OV 1.16 ! PT 0.82 SC 0.92 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.80 HN 0.69 KP 1.19 ! LA 0.89 MK 1.00* NL 0.88 OV 1.11 ! PT 0.80 SC 1.19 ! ! ! Fit before self-cal, rms=0.179412Jy sigma=0.001867 ! Fit after self-cal, rms=0.185439Jy sigma=0.001778 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.363 mas, bmaj=10.14 mas, bpa=16.7 degrees ! Estimated noise=506.968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19.5, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0346428 Jy ! Component: 100 - total flux cleaned = 0.0506085 Jy ! Component: 150 - total flux cleaned = 0.0543879 Jy ! Component: 200 - total flux cleaned = 0.0553013 Jy ! Total flux subtracted in 200 components = 0.0553013 Jy ! Clean residual min=-0.022786 max=0.023891 Jy/beam ! Clean residual mean=0.000307 rms=0.006868 Jy/beam ! Combined flux in latest and established models = 0.290687 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 78 components and 0.290687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177323Jy sigma=0.001686 ! Fit after self-cal, rms=0.178103Jy sigma=0.001670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178103Jy sigma=0.001670 ! Fit after self-cal, rms=0.394514Jy sigma=0.001535 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.344 mas, bmaj=9.98 mas, bpa=14.29 degrees ! Estimated noise=501.149 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0184336 Jy ! Component: 100 - total flux cleaned = 0.0282275 Jy ! Component: 150 - total flux cleaned = 0.0332148 Jy ! Component: 200 - total flux cleaned = 0.0371957 Jy ! Total flux subtracted in 200 components = 0.0371957 Jy ! Clean residual min=-0.019837 max=0.018136 Jy/beam ! Clean residual mean=-0.000021 rms=0.005275 Jy/beam ! Combined flux in latest and established models = 0.327882 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 109 components and 0.327882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.392141Jy sigma=0.001494 ! Fit after self-cal, rms=0.400669Jy sigma=0.001481 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00809132 Jy ! Component: 100 - total flux cleaned = 0.0111547 Jy ! Component: 150 - total flux cleaned = 0.013095 Jy ! Component: 200 - total flux cleaned = 0.0136028 Jy ! Total flux subtracted in 200 components = 0.0136028 Jy ! Clean residual min=-0.019466 max=0.018270 Jy/beam ! Clean residual mean=-0.000014 rms=0.005000 Jy/beam ! Combined flux in latest and established models = 0.341485 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 132 components and 0.341485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.399934Jy sigma=0.001468 ! Fit after self-cal, rms=0.399795Jy sigma=0.001467 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.399795Jy sigma=0.001467 ! Fit after self-cal, rms=0.477893Jy sigma=0.001457 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.361 mas, bmaj=9.958 mas, bpa=13.43 degrees ! Estimated noise=495.195 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00375677 Jy ! Component: 100 - total flux cleaned = 0.00690224 Jy ! Component: 150 - total flux cleaned = 0.00894931 Jy ! Component: 200 - total flux cleaned = 0.00966046 Jy ! Total flux subtracted in 200 components = 0.00966046 Jy ! Clean residual min=-0.018380 max=0.016781 Jy/beam ! Clean residual mean=-0.000044 rms=0.004735 Jy/beam ! Combined flux in latest and established models = 0.351146 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 145 components and 0.351146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.477249Jy sigma=0.001444 ! Fit after self-cal, rms=0.478307Jy sigma=0.001443 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322102 Jy ! Component: 100 - total flux cleaned = 0.00365729 Jy ! Component: 150 - total flux cleaned = 0.00366021 Jy ! Component: 200 - total flux cleaned = 0.00405298 Jy ! Total flux subtracted in 200 components = 0.00405298 Jy ! Clean residual min=-0.018345 max=0.017047 Jy/beam ! Clean residual mean=-0.000041 rms=0.004663 Jy/beam ! Combined flux in latest and established models = 0.355199 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 155 components and 0.355199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.477931Jy sigma=0.001437 ! Fit after self-cal, rms=0.477865Jy sigma=0.001437 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.477865Jy sigma=0.001437 ! Fit after self-cal, rms=0.504628Jy sigma=0.001435 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.34 mas, bmaj=12.73 mas, bpa=9.056 degrees ! Estimated noise=555.501 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.22593e-06 Jy ! Component: 100 - total flux cleaned = 0.000869767 Jy ! Component: 150 - total flux cleaned = 0.00144214 Jy ! Component: 200 - total flux cleaned = 0.00160915 Jy ! Total flux subtracted in 200 components = 0.00160915 Jy ! Clean residual min=-0.024496 max=0.020412 Jy/beam ! Clean residual mean=-0.000075 rms=0.006189 Jy/beam ! Combined flux in latest and established models = 0.356808 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 179 components and 0.356808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.504269Jy sigma=0.001430 ! Fit after self-cal, rms=0.504528Jy sigma=0.001430 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000848198 Jy ! Component: 100 - total flux cleaned = 0.000852481 Jy ! Component: 150 - total flux cleaned = 0.000996966 Jy ! Component: 200 - total flux cleaned = 0.00112632 Jy ! Total flux subtracted in 200 components = 0.00112632 Jy ! Clean residual min=-0.024327 max=0.019984 Jy/beam ! Clean residual mean=-0.000074 rms=0.006142 Jy/beam ! Combined flux in latest and established models = 0.357934 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 187 components and 0.357934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.504280Jy sigma=0.001429 ! Fit after self-cal, rms=0.504089Jy sigma=0.001428 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.374 mas, bmaj=9.938 mas, bpa=12.78 degrees ! Estimated noise=491.005 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.374 x 9.938 at 12.78 degrees (North through East) ! Clean map min=-0.017232 max=0.15138 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.548 mas, bmaj=8.856 mas, bpa=13.55 degrees ! Estimated noise=777.106 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.11762 Jy ! Component: 100 - total flux cleaned = 0.167485 Jy ! Component: 150 - total flux cleaned = 0.202434 Jy ! Component: 200 - total flux cleaned = 0.229532 Jy ! Total flux subtracted in 200 components = 0.229532 Jy ! Clean residual min=-0.020987 max=0.023118 Jy/beam ! Clean residual mean=-0.000137 rms=0.005932 Jy/beam ! Combined flux in latest and established models = 0.229532 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.229532 Jy ! Inverting map and beam ! Estimated beam: bmin=4.374 mas, bmaj=9.938 mas, bpa=12.78 degrees ! Estimated noise=491.005 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0284905 Jy ! Component: 100 - total flux cleaned = 0.0494949 Jy ! Component: 150 - total flux cleaned = 0.0665504 Jy ! Component: 200 - total flux cleaned = 0.0774837 Jy ! Total flux subtracted in 200 components = 0.0774837 Jy ! Clean residual min=-0.020338 max=0.016454 Jy/beam ! Clean residual mean=-0.000090 rms=0.005081 Jy/beam ! Combined flux in latest and established models = 0.307016 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 75 components and 0.307015 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.34 mas, bmaj=12.73 mas, bpa=9.056 degrees ! Estimated noise=555.501 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162793 Jy ! Component: 100 - total flux cleaned = 0.0256803 Jy ! Component: 150 - total flux cleaned = 0.0319136 Jy ! Component: 200 - total flux cleaned = 0.0367315 Jy ! Total flux subtracted in 200 components = 0.0367315 Jy ! Clean residual min=-0.025661 max=0.020161 Jy/beam ! Clean residual mean=-0.000099 rms=0.006296 Jy/beam ! Combined flux in latest and established models = 0.343747 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00425876 Jy ! Component: 100 - total flux cleaned = 0.00781288 Jy ! Component: 150 - total flux cleaned = 0.00927419 Jy ! Component: 200 - total flux cleaned = 0.00993763 Jy ! Total flux subtracted in 200 components = 0.00993763 Jy ! Clean residual min=-0.024964 max=0.020129 Jy/beam ! Clean residual mean=-0.000083 rms=0.006193 Jy/beam ! Combined flux in latest and established models = 0.353685 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 144 components and 0.353685 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.374 mas, bmaj=9.938 mas, bpa=12.78 degrees ! Estimated noise=491.005 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000419751 Jy ! Component: 100 - total flux cleaned = 0.000130444 Jy ! Component: 150 - total flux cleaned = 0.000383793 Jy ! Component: 200 - total flux cleaned = 0.000615656 Jy ! Total flux subtracted in 200 components = 0.000615656 Jy ! Clean residual min=-0.018402 max=0.016613 Jy/beam ! Clean residual mean=-0.000046 rms=0.004577 Jy/beam ! Combined flux in latest and established models = 0.3543 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 164 components and 0.3543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.504315Jy sigma=0.001436 ! Fit after self-cal, rms=0.503919Jy sigma=0.001435 wmodel J0414+053A_S_2014_08_05_pus_map.mod ! Writing 164 model components to file: J0414+053A_S_2014_08_05_pus_map.mod wobs J0414+053A_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J0414+053A_S_2014_08_05_pus_uvs.fits wwins J0414+053A_S_2014_08_05_pus_map.win ! wwins: Wrote 2 windows to J0414+053A_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00402897 Jy ! Component: 100 - total flux cleaned = -0.00402039 Jy ! Component: 150 - total flux cleaned = -0.00374324 Jy ! Component: 200 - total flux cleaned = -0.00374271 Jy ! Component: 250 - total flux cleaned = -0.00274483 Jy ! Component: 300 - total flux cleaned = -0.00251134 Jy ! Component: 350 - total flux cleaned = -0.00228028 Jy ! Component: 400 - total flux cleaned = -0.00250966 Jy ! Component: 450 - total flux cleaned = -0.00228695 Jy ! Component: 500 - total flux cleaned = -0.00165075 Jy ! Component: 550 - total flux cleaned = -0.00165383 Jy ! Component: 600 - total flux cleaned = -0.000851863 Jy ! Component: 650 - total flux cleaned = -0.000457178 Jy ! Component: 700 - total flux cleaned = 0.000688848 Jy ! Component: 750 - total flux cleaned = 0.00142962 Jy ! Component: 800 - total flux cleaned = 0.00233916 Jy ! Component: 850 - total flux cleaned = 0.00270268 Jy ! Component: 900 - total flux cleaned = 0.00375696 Jy ! Component: 950 - total flux cleaned = 0.00461699 Jy ! Component: 1000 - total flux cleaned = 0.00546137 Jy ! Component: 1050 - total flux cleaned = 0.00645599 Jy ! Component: 1100 - total flux cleaned = 0.00710705 Jy ! Component: 1150 - total flux cleaned = 0.00758822 Jy ! Component: 1200 - total flux cleaned = 0.00821947 Jy ! Component: 1250 - total flux cleaned = 0.00883741 Jy ! Component: 1300 - total flux cleaned = 0.00929393 Jy ! Component: 1350 - total flux cleaned = 0.00974475 Jy ! Component: 1400 - total flux cleaned = 0.0103421 Jy ! Component: 1450 - total flux cleaned = 0.0109296 Jy ! Component: 1500 - total flux cleaned = 0.0115062 Jy ! Component: 1550 - total flux cleaned = 0.0117931 Jy ! Component: 1600 - total flux cleaned = 0.0123587 Jy ! Component: 1650 - total flux cleaned = 0.013055 Jy ! Component: 1700 - total flux cleaned = 0.0134677 Jy ! Component: 1750 - total flux cleaned = 0.0141495 Jy ! Component: 1800 - total flux cleaned = 0.0149581 Jy ! Component: 1850 - total flux cleaned = 0.0153581 Jy ! Component: 1900 - total flux cleaned = 0.0161515 Jy ! Component: 1950 - total flux cleaned = 0.0165418 Jy ! Component: 2000 - total flux cleaned = 0.0169304 Jy ! Component: 2050 - total flux cleaned = 0.0175714 Jy ! Component: 2100 - total flux cleaned = 0.0180802 Jy ! Component: 2150 - total flux cleaned = 0.0184594 Jy ! Component: 2200 - total flux cleaned = 0.0192109 Jy ! Component: 2250 - total flux cleaned = 0.0198326 Jy ! Component: 2300 - total flux cleaned = 0.0204483 Jy ! Component: 2350 - total flux cleaned = 0.0206915 Jy ! Component: 2400 - total flux cleaned = 0.0211774 Jy ! Component: 2450 - total flux cleaned = 0.0212987 Jy ! Component: 2500 - total flux cleaned = 0.022016 Jy ! Component: 2550 - total flux cleaned = 0.022728 Jy ! Component: 2600 - total flux cleaned = 0.0230807 Jy ! Component: 2650 - total flux cleaned = 0.0234326 Jy ! Component: 2700 - total flux cleaned = 0.0242459 Jy ! Component: 2750 - total flux cleaned = 0.0245928 Jy ! Component: 2800 - total flux cleaned = 0.0249369 Jy ! Component: 2850 - total flux cleaned = 0.0253928 Jy ! Component: 2900 - total flux cleaned = 0.025621 Jy ! Component: 2950 - total flux cleaned = 0.0265238 Jy ! Component: 3000 - total flux cleaned = 0.026748 Jy ! Component: 3050 - total flux cleaned = 0.0274177 Jy ! Component: 3100 - total flux cleaned = 0.027751 Jy ! Component: 3150 - total flux cleaned = 0.0281922 Jy ! Component: 3200 - total flux cleaned = 0.0286307 Jy ! Component: 3250 - total flux cleaned = 0.0291763 Jy ! Component: 3300 - total flux cleaned = 0.0293934 Jy ! Component: 3350 - total flux cleaned = 0.0299342 Jy ! Component: 3400 - total flux cleaned = 0.030364 Jy ! Component: 3450 - total flux cleaned = 0.0305778 Jy ! Component: 3500 - total flux cleaned = 0.0304722 Jy ! Component: 3550 - total flux cleaned = 0.030896 Jy ! Component: 3600 - total flux cleaned = 0.0311075 Jy ! Component: 3650 - total flux cleaned = 0.0314225 Jy ! Component: 3700 - total flux cleaned = 0.0316318 Jy ! Component: 3750 - total flux cleaned = 0.0320477 Jy ! Component: 3800 - total flux cleaned = 0.032152 Jy ! Component: 3850 - total flux cleaned = 0.0323576 Jy ! Component: 3900 - total flux cleaned = 0.0331793 Jy ! Component: 3950 - total flux cleaned = 0.0330766 Jy ! Component: 4000 - total flux cleaned = 0.0336872 Jy ! Component: 4050 - total flux cleaned = 0.0337881 Jy ! Total flux subtracted in 4096 components = 0.0340911 Jy ! Clean residual min=-0.006676 max=0.006090 Jy/beam ! Clean residual mean=0.000004 rms=0.001980 Jy/beam ! Combined flux in latest and established models = 0.388391 Jy keep ! Adding 316 model components to the UV plane model. ! The established model now contains 480 components and 0.388391 Jy ![Exited script file: muppet] wmap "J0414+053A_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.374 x 9.938 at 12.78 degrees (North through East) ! Clean map min=-0.014297 max=0.14834 Jy/beam ! Writing clean map to FITS file: J0414+053A_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.148342 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00193117 device "J0414+053A_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0414+053A_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.9055 3.9055 7.811 15.622 31.244 62.488 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0057 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.148 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.374 x 9.938 at 12.78 degrees (North through East) ! Clean map min=-0.014297 max=0.14834 Jy/beam quit ! Quitting program ! Log file J0414+053A_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:15:03 2016