! Started logfile: J0413-0615_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:16:23 2017 obs J0413-0615_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0413-0615_S_2014_01_04_pus_uva.fits ! AN table 1: 126 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J0413-0615 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0413-0615_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 315 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 315 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 315 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 315 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.989119Jy sigma=0.012777 ! Fit after self-cal, rms=0.948183Jy sigma=0.012197 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=6.857 mas, bpa=-6.632 degrees ! Estimated noise=847.394 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0432935 Jy ! Component: 100 - total flux cleaned = 0.0527356 Jy ! Total flux subtracted in 100 components = 0.0527356 Jy ! Clean residual min=-0.004603 max=0.004280 Jy/beam ! Clean residual mean=-0.000006 rms=0.001015 Jy/beam ! Combined flux in latest and established models = 0.0527356 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0527356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077430Jy sigma=0.000879 ! Fit after self-cal, rms=0.076626Jy sigma=0.000870 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.82 mas, bmaj=7.501 mas, bpa=-8.259 degrees ! Estimated noise=601.078 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00373406 Jy ! Component: 100 - total flux cleaned = 0.00474051 Jy ! Component: 150 - total flux cleaned = 0.00479535 Jy ! Component: 200 - total flux cleaned = 0.00479618 Jy ! Total flux subtracted in 200 components = 0.00479618 Jy ! Clean residual min=-0.003730 max=0.002701 Jy/beam ! Clean residual mean=-0.000010 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.0575318 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 22 components and 0.0575318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076493Jy sigma=0.000867 ! Fit after self-cal, rms=0.076601Jy sigma=0.000867 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 1.00* KP 1.00* LA 1.10 ! MK 1.02 NL 1.01 OV 1.06 PT 1.08 ! SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* KP 1.00* LA 1.07 ! MK 1.00 NL 1.09 OV 1.11 PT 1.05 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 1.00* KP 1.00* LA 0.90 ! MK 1.00 NL 1.07 OV 0.97 PT 1.02 ! SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* KP 1.00* LA 1.02 ! MK 1.02 NL 1.11 OV 1.03 PT 1.14 ! SC 0.91 ! ! ! Fit before self-cal, rms=0.076601Jy sigma=0.000867 ! Fit after self-cal, rms=0.078392Jy sigma=0.000861 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.836 mas, bmaj=7.296 mas, bpa=-7.523 degrees ! Estimated noise=594.924 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120038 Jy ! Component: 100 - total flux cleaned = 0.00153237 Jy ! Component: 150 - total flux cleaned = 0.00160559 Jy ! Component: 200 - total flux cleaned = 0.00169252 Jy ! Total flux subtracted in 200 components = 0.00169252 Jy ! Clean residual min=-0.002142 max=0.002517 Jy/beam ! Clean residual mean=-0.000013 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.0592243 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 0.0592243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078363Jy sigma=0.000861 ! Fit after self-cal, rms=0.079319Jy sigma=0.000860 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079319Jy sigma=0.000860 ! Fit after self-cal, rms=0.082604Jy sigma=0.000858 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.835 mas, bmaj=7.175 mas, bpa=-7.166 degrees ! Estimated noise=602.836 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101452 Jy ! Component: 100 - total flux cleaned = 0.00132199 Jy ! Component: 150 - total flux cleaned = 0.00135763 Jy ! Component: 200 - total flux cleaned = 0.00142176 Jy ! Total flux subtracted in 200 components = 0.00142176 Jy ! Clean residual min=-0.002080 max=0.002299 Jy/beam ! Clean residual mean=-0.000014 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.0606461 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 40 components and 0.0606461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082581Jy sigma=0.000858 ! Fit after self-cal, rms=0.083144Jy sigma=0.000857 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00028881 Jy ! Component: 100 - total flux cleaned = -0.000250284 Jy ! Component: 150 - total flux cleaned = -0.000178371 Jy ! Component: 200 - total flux cleaned = -0.000128539 Jy ! Total flux subtracted in 200 components = -0.000128539 Jy ! Clean residual min=-0.002199 max=0.002205 Jy/beam ! Clean residual mean=-0.000013 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.0605175 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.0605175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083131Jy sigma=0.000857 ! Fit after self-cal, rms=0.083149Jy sigma=0.000857 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083149Jy sigma=0.000857 ! Fit after self-cal, rms=0.084779Jy sigma=0.000856 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.825 mas, bmaj=7.107 mas, bpa=-7.044 degrees ! Estimated noise=602.799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00093529 Jy ! Component: 100 - total flux cleaned = 0.00119931 Jy ! Component: 150 - total flux cleaned = 0.00128263 Jy ! Component: 200 - total flux cleaned = 0.00135859 Jy ! Total flux subtracted in 200 components = 0.00135859 Jy ! Clean residual min=-0.002032 max=0.002217 Jy/beam ! Clean residual mean=-0.000013 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.0618761 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 0.0618761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084758Jy sigma=0.000856 ! Fit after self-cal, rms=0.085046Jy sigma=0.000856 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (59, -80.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217583 Jy ! Component: 100 - total flux cleaned = 0.00255765 Jy ! Component: 150 - total flux cleaned = 0.00262919 Jy ! Component: 200 - total flux cleaned = 0.0025171 Jy ! Total flux subtracted in 200 components = 0.0025171 Jy ! Clean residual min=-0.002008 max=0.001788 Jy/beam ! Clean residual mean=-0.000011 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.0643932 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 0.0643932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084966Jy sigma=0.000855 ! Fit after self-cal, rms=0.084999Jy sigma=0.000855 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084999Jy sigma=0.000855 ! Fit after self-cal, rms=0.086453Jy sigma=0.000855 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.945 mas, bmaj=11.53 mas, bpa=4.05 degrees ! Estimated noise=729.286 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134476 Jy ! Component: 100 - total flux cleaned = 0.00186953 Jy ! Component: 150 - total flux cleaned = 0.00199817 Jy ! Component: 200 - total flux cleaned = 0.00197826 Jy ! Total flux subtracted in 200 components = 0.00197826 Jy ! Clean residual min=-0.001954 max=0.001812 Jy/beam ! Clean residual mean=-0.000023 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.0663715 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 74 components and 0.0663715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086417Jy sigma=0.000855 ! Fit after self-cal, rms=0.086555Jy sigma=0.000855 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000585203 Jy ! Component: 100 - total flux cleaned = 0.000646426 Jy ! Component: 150 - total flux cleaned = 0.00057179 Jy ! Component: 200 - total flux cleaned = 0.000505118 Jy ! Total flux subtracted in 200 components = 0.000505118 Jy ! Clean residual min=-0.001991 max=0.001773 Jy/beam ! Clean residual mean=-0.000023 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.0668766 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 79 components and 0.0668766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086536Jy sigma=0.000855 ! Fit after self-cal, rms=0.086529Jy sigma=0.000855 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.829 mas, bmaj=7.072 mas, bpa=-6.763 degrees ! Estimated noise=605.025 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.829 x 7.072 at -6.763 degrees (North through East) ! Clean map min=-0.0018655 max=0.054655 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=6.505 mas, bpa=-4.845 degrees ! Estimated noise=863.023 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0431757 Jy ! Component: 100 - total flux cleaned = 0.0529009 Jy ! Component: 150 - total flux cleaned = 0.0572896 Jy ! Component: 200 - total flux cleaned = 0.0602668 Jy ! Total flux subtracted in 200 components = 0.0602668 Jy ! Clean residual min=-0.002852 max=0.002756 Jy/beam ! Clean residual mean=-0.000007 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.0602668 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0602668 Jy ! Inverting map and beam ! Estimated beam: bmin=3.829 mas, bmaj=7.072 mas, bpa=-6.763 degrees ! Estimated noise=605.025 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00290458 Jy ! Component: 100 - total flux cleaned = 0.00436194 Jy ! Component: 150 - total flux cleaned = 0.00538308 Jy ! Component: 200 - total flux cleaned = 0.00582305 Jy ! Total flux subtracted in 200 components = 0.00582305 Jy ! Clean residual min=-0.002180 max=0.001922 Jy/beam ! Clean residual mean=-0.000013 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.0660898 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 41 components and 0.0660898 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.945 mas, bmaj=11.53 mas, bpa=4.05 degrees ! Estimated noise=729.286 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000551886 Jy ! Component: 100 - total flux cleaned = 0.000647113 Jy ! Component: 150 - total flux cleaned = 0.000626258 Jy ! Component: 200 - total flux cleaned = 0.000562875 Jy ! Total flux subtracted in 200 components = 0.000562875 Jy ! Clean residual min=-0.002002 max=0.001745 Jy/beam ! Clean residual mean=-0.000026 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.0666527 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.33886e-05 Jy ! Component: 100 - total flux cleaned = -8.52012e-05 Jy ! Component: 150 - total flux cleaned = -0.000114332 Jy ! Component: 200 - total flux cleaned = -0.000126681 Jy ! Total flux subtracted in 200 components = -0.000126681 Jy ! Clean residual min=-0.001955 max=0.001704 Jy/beam ! Clean residual mean=-0.000025 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.066526 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 68 components and 0.066526 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.829 mas, bmaj=7.072 mas, bpa=-6.763 degrees ! Estimated noise=605.025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000200091 Jy ! Component: 100 - total flux cleaned = 0.000343512 Jy ! Component: 150 - total flux cleaned = 0.000345112 Jy ! Component: 200 - total flux cleaned = 0.000345942 Jy ! Total flux subtracted in 200 components = 0.000345942 Jy ! Clean residual min=-0.002032 max=0.001780 Jy/beam ! Clean residual mean=-0.000013 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.066872 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 81 components and 0.066872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086496Jy sigma=0.000855 ! Fit after self-cal, rms=0.086493Jy sigma=0.000854 wmodel J0413-0615_S_2014_01_04_pus_map.mod ! Writing 81 model components to file: J0413-0615_S_2014_01_04_pus_map.mod wobs J0413-0615_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0413-0615_S_2014_01_04_pus_uvs.fits wwins J0413-0615_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J0413-0615_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000613472 Jy ! Component: 100 - total flux cleaned = -0.000735922 Jy ! Component: 150 - total flux cleaned = -0.000707588 Jy ! Component: 200 - total flux cleaned = -0.00068063 Jy ! Component: 250 - total flux cleaned = -0.000706352 Jy ! Component: 300 - total flux cleaned = -0.000729806 Jy ! Component: 350 - total flux cleaned = -0.000775032 Jy ! Component: 400 - total flux cleaned = -0.000796056 Jy ! Component: 450 - total flux cleaned = -0.000881024 Jy ! Component: 500 - total flux cleaned = -0.000943361 Jy ! Component: 550 - total flux cleaned = -0.00108286 Jy ! Component: 600 - total flux cleaned = -0.00123632 Jy ! Component: 650 - total flux cleaned = -0.00132903 Jy ! Component: 700 - total flux cleaned = -0.00143774 Jy ! Component: 750 - total flux cleaned = -0.00154352 Jy ! Component: 800 - total flux cleaned = -0.00168063 Jy ! Component: 850 - total flux cleaned = -0.00182994 Jy ! Component: 900 - total flux cleaned = -0.0019594 Jy ! Component: 950 - total flux cleaned = -0.00197531 Jy ! Component: 1000 - total flux cleaned = -0.00202171 Jy ! Component: 1050 - total flux cleaned = -0.00203674 Jy ! Component: 1100 - total flux cleaned = -0.00206607 Jy ! Component: 1150 - total flux cleaned = -0.00208041 Jy ! Component: 1200 - total flux cleaned = -0.00208037 Jy ! Component: 1250 - total flux cleaned = -0.00210828 Jy ! Component: 1300 - total flux cleaned = -0.00217659 Jy ! Component: 1350 - total flux cleaned = -0.00221672 Jy ! Component: 1400 - total flux cleaned = -0.00224319 Jy ! Component: 1450 - total flux cleaned = -0.00230854 Jy ! Component: 1500 - total flux cleaned = -0.00235993 Jy ! Component: 1550 - total flux cleaned = -0.00239783 Jy ! Component: 1600 - total flux cleaned = -0.00247262 Jy ! Component: 1650 - total flux cleaned = -0.00253384 Jy ! Component: 1700 - total flux cleaned = -0.0025701 Jy ! Component: 1750 - total flux cleaned = -0.00260571 Jy ! Component: 1800 - total flux cleaned = -0.00266412 Jy ! Component: 1850 - total flux cleaned = -0.00272183 Jy ! Component: 1900 - total flux cleaned = -0.00276742 Jy ! Component: 1950 - total flux cleaned = -0.00280116 Jy ! Component: 2000 - total flux cleaned = -0.00287907 Jy ! Component: 2050 - total flux cleaned = -0.00289017 Jy ! Component: 2100 - total flux cleaned = -0.00293365 Jy ! Component: 2150 - total flux cleaned = -0.00297652 Jy ! Component: 2200 - total flux cleaned = -0.00300827 Jy ! Component: 2250 - total flux cleaned = -0.00306066 Jy ! Component: 2300 - total flux cleaned = -0.00307101 Jy ! Component: 2350 - total flux cleaned = -0.0031019 Jy ! Component: 2400 - total flux cleaned = -0.00315286 Jy ! Component: 2450 - total flux cleaned = -0.00315283 Jy ! Component: 2500 - total flux cleaned = -0.0031628 Jy ! Component: 2550 - total flux cleaned = -0.00319252 Jy ! Component: 2600 - total flux cleaned = -0.00316304 Jy ! Component: 2650 - total flux cleaned = -0.00319242 Jy ! Component: 2700 - total flux cleaned = -0.00319255 Jy ! Component: 2750 - total flux cleaned = -0.00318294 Jy ! Component: 2800 - total flux cleaned = -0.00320199 Jy ! Component: 2850 - total flux cleaned = -0.00318317 Jy ! Component: 2900 - total flux cleaned = -0.00320194 Jy ! Component: 2950 - total flux cleaned = -0.00322066 Jy ! Component: 3000 - total flux cleaned = -0.00319284 Jy ! Component: 3050 - total flux cleaned = -0.00322049 Jy ! Component: 3100 - total flux cleaned = -0.00322954 Jy ! Component: 3150 - total flux cleaned = -0.00322951 Jy ! Component: 3200 - total flux cleaned = -0.0032205 Jy ! Component: 3250 - total flux cleaned = -0.00323849 Jy ! Component: 3300 - total flux cleaned = -0.00324744 Jy ! Component: 3350 - total flux cleaned = -0.00327425 Jy ! Component: 3400 - total flux cleaned = -0.00328315 Jy ! Component: 3450 - total flux cleaned = -0.00330086 Jy ! Component: 3500 - total flux cleaned = -0.00334477 Jy ! Component: 3550 - total flux cleaned = -0.00332725 Jy ! Component: 3600 - total flux cleaned = -0.00336217 Jy ! Component: 3650 - total flux cleaned = -0.00337092 Jy ! Component: 3700 - total flux cleaned = -0.00340555 Jy ! Component: 3750 - total flux cleaned = -0.00342277 Jy ! Component: 3800 - total flux cleaned = -0.00345713 Jy ! Component: 3850 - total flux cleaned = -0.00349992 Jy ! Component: 3900 - total flux cleaned = -0.00354255 Jy ! Component: 3950 - total flux cleaned = -0.00355106 Jy ! Component: 4000 - total flux cleaned = -0.00357649 Jy ! Component: 4050 - total flux cleaned = -0.00361875 Jy ! Total flux subtracted in 4096 components = -0.00364401 Jy ! Clean residual min=-0.000558 max=0.000481 Jy/beam ! Clean residual mean=-0.000002 rms=0.000146 Jy/beam ! Combined flux in latest and established models = 0.063228 Jy keep ! Adding 255 model components to the UV plane model. ! The established model now contains 335 components and 0.063228 Jy ![Exited script file: muppet] wmap "J0413-0615_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.829 x 7.072 at -6.763 degrees (North through East) ! Clean map min=-0.0013183 max=0.054682 Jy/beam ! Writing clean map to FITS file: J0413-0615_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0546821 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000140309 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.76977 0.76977 1.53954 3.07908 6.15816 12.3163 24.6327 49.2653 98.5306 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.054 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.829 x 7.072 at -6.763 degrees (North through East) ! Clean map min=-0.0013183 max=0.054682 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0413-0615_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:16:28 2017