! Started logfile: J0406-2355_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:16:19 2017 obs J0406-2355_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0406-2355_S_2014_01_04_pus_uva.fits ! AN table 1: 86 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0406-2355 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 7224 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0406-2355_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 172 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 172 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 172 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 172 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.952165Jy sigma=0.010262 ! Fit after self-cal, rms=0.922272Jy sigma=0.009987 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.254 mas, bmaj=5.807 mas, bpa=-1.956 degrees ! Estimated noise=1124.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0602051 Jy ! Component: 100 - total flux cleaned = 0.078072 Jy ! Total flux subtracted in 100 components = 0.078072 Jy ! Clean residual min=-0.006904 max=0.007822 Jy/beam ! Clean residual mean=0.000019 rms=0.001598 Jy/beam ! Combined flux in latest and established models = 0.078072 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.078072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090633Jy sigma=0.000909 ! Fit after self-cal, rms=0.090629Jy sigma=0.000909 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.81 mas, bmaj=6.811 mas, bpa=-2.761 degrees ! Estimated noise=789.038 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108759 Jy ! Component: 100 - total flux cleaned = 0.015603 Jy ! Component: 150 - total flux cleaned = 0.0180494 Jy ! Component: 200 - total flux cleaned = 0.0186301 Jy ! Total flux subtracted in 200 components = 0.0186301 Jy ! Clean residual min=-0.004090 max=0.003457 Jy/beam ! Clean residual mean=0.000004 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.0967021 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 25 components and 0.0967021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089427Jy sigma=0.000896 ! Fit after self-cal, rms=0.089506Jy sigma=0.000895 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* KP 1.00* LA 1.00 ! MK 1.02 NL 1.06 OV 1.02 PT 1.02 ! SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.00* KP 1.00* LA 1.08 ! MK 1.01 NL 1.12 OV 1.05 PT 0.97 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 1.00* KP 1.00* LA 0.88 ! MK 0.94 NL 0.99 OV 1.00 PT 1.02 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* KP 1.00* LA 0.91 ! MK 1.10 NL 1.17 OV 1.07 PT 1.05 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.089506Jy sigma=0.000895 ! Fit after self-cal, rms=0.088361Jy sigma=0.000890 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.824 mas, bmaj=6.791 mas, bpa=-2.41 degrees ! Estimated noise=792.137 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000394381 Jy ! Component: 100 - total flux cleaned = 0.000537297 Jy ! Component: 150 - total flux cleaned = 0.000624565 Jy ! Component: 200 - total flux cleaned = 0.000705337 Jy ! Total flux subtracted in 200 components = 0.000705337 Jy ! Clean residual min=-0.003033 max=0.003544 Jy/beam ! Clean residual mean=-0.000008 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.0974074 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 38 components and 0.0974074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088307Jy sigma=0.000889 ! Fit after self-cal, rms=0.088557Jy sigma=0.000889 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088557Jy sigma=0.000889 ! Fit after self-cal, rms=0.089128Jy sigma=0.000888 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.823 mas, bmaj=6.778 mas, bpa=-2.186 degrees ! Estimated noise=799.041 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113659 Jy ! Component: 100 - total flux cleaned = 0.00122337 Jy ! Component: 150 - total flux cleaned = 0.00130306 Jy ! Component: 200 - total flux cleaned = 0.00137852 Jy ! Total flux subtracted in 200 components = 0.00137852 Jy ! Clean residual min=-0.002994 max=0.003368 Jy/beam ! Clean residual mean=-0.000009 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.098786 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 41 components and 0.098786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089078Jy sigma=0.000888 ! Fit after self-cal, rms=0.089166Jy sigma=0.000888 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (72.5, 121). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187349 Jy ! Component: 100 - total flux cleaned = 0.00225989 Jy ! Component: 150 - total flux cleaned = 0.00253003 Jy ! Component: 200 - total flux cleaned = 0.00264568 Jy ! Total flux subtracted in 200 components = 0.00264568 Jy ! Clean residual min=-0.003081 max=0.002772 Jy/beam ! Clean residual mean=-0.000013 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.101432 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 59 components and 0.101432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089055Jy sigma=0.000886 ! Fit after self-cal, rms=0.089115Jy sigma=0.000886 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089115Jy sigma=0.000886 ! Fit after self-cal, rms=0.088823Jy sigma=0.000885 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=6.764 mas, bpa=-2.117 degrees ! Estimated noise=799.633 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144058 Jy ! Component: 100 - total flux cleaned = 0.00179205 Jy ! Component: 150 - total flux cleaned = 0.0020503 Jy ! Component: 200 - total flux cleaned = 0.00221328 Jy ! Total flux subtracted in 200 components = 0.00221328 Jy ! Clean residual min=-0.002462 max=0.002814 Jy/beam ! Clean residual mean=-0.000016 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.103645 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 64 components and 0.103645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088771Jy sigma=0.000884 ! Fit after self-cal, rms=0.088892Jy sigma=0.000884 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000487627 Jy ! Component: 100 - total flux cleaned = 0.000630816 Jy ! Component: 150 - total flux cleaned = 0.000696076 Jy ! Component: 200 - total flux cleaned = 0.00075628 Jy ! Total flux subtracted in 200 components = 0.00075628 Jy ! Clean residual min=-0.002496 max=0.002757 Jy/beam ! Clean residual mean=-0.000014 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.104401 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 68 components and 0.104401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088862Jy sigma=0.000884 ! Fit after self-cal, rms=0.088898Jy sigma=0.000884 ! Inverting map ! Added new window around map position (25, -93). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171624 Jy ! Component: 100 - total flux cleaned = 0.00181446 Jy ! Component: 150 - total flux cleaned = 0.00194288 Jy ! Component: 200 - total flux cleaned = 0.00194313 Jy ! Total flux subtracted in 200 components = 0.00194313 Jy ! Clean residual min=-0.002362 max=0.002343 Jy/beam ! Clean residual mean=-0.000008 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.106344 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 84 components and 0.106344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088810Jy sigma=0.000883 ! Fit after self-cal, rms=0.088840Jy sigma=0.000883 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088840Jy sigma=0.000883 ! Fit after self-cal, rms=0.088862Jy sigma=0.000883 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.651 mas, bmaj=18.15 mas, bpa=2.809 degrees ! Estimated noise=1012.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011223 Jy ! Component: 100 - total flux cleaned = 0.00156907 Jy ! Component: 150 - total flux cleaned = 0.00168609 Jy ! Component: 200 - total flux cleaned = 0.00170067 Jy ! Total flux subtracted in 200 components = 0.00170067 Jy ! Clean residual min=-0.002023 max=0.002646 Jy/beam ! Clean residual mean=-0.000011 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.108045 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 94 components and 0.108045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088840Jy sigma=0.000882 ! Fit after self-cal, rms=0.088883Jy sigma=0.000882 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000149032 Jy ! Component: 100 - total flux cleaned = 0.000206353 Jy ! Component: 150 - total flux cleaned = 0.00019312 Jy ! Component: 200 - total flux cleaned = 0.000180597 Jy ! Total flux subtracted in 200 components = 0.000180597 Jy ! Clean residual min=-0.002057 max=0.002657 Jy/beam ! Clean residual mean=-0.000010 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.108226 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 102 components and 0.108226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088875Jy sigma=0.000882 ! Fit after self-cal, rms=0.088877Jy sigma=0.000882 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.813 mas, bmaj=6.755 mas, bpa=-2.049 degrees ! Estimated noise=799.658 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.813 x 6.755 at -2.049 degrees (North through East) ! Clean map min=-0.0029129 max=0.079627 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.249 mas, bmaj=5.765 mas, bpa=-1.055 degrees ! Estimated noise=1134.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.059845 Jy ! Component: 100 - total flux cleaned = 0.0797068 Jy ! Component: 150 - total flux cleaned = 0.0898679 Jy ! Component: 200 - total flux cleaned = 0.0967008 Jy ! Total flux subtracted in 200 components = 0.0967008 Jy ! Clean residual min=-0.006231 max=0.004122 Jy/beam ! Clean residual mean=-0.000007 rms=0.001179 Jy/beam ! Combined flux in latest and established models = 0.0967008 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0967008 Jy ! Inverting map and beam ! Estimated beam: bmin=2.813 mas, bmaj=6.755 mas, bpa=-2.049 degrees ! Estimated noise=799.658 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0046447 Jy ! Component: 100 - total flux cleaned = 0.00636457 Jy ! Component: 150 - total flux cleaned = 0.00794952 Jy ! Component: 200 - total flux cleaned = 0.00883486 Jy ! Total flux subtracted in 200 components = 0.00883486 Jy ! Clean residual min=-0.003242 max=0.002607 Jy/beam ! Clean residual mean=-0.000006 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.105536 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 38 components and 0.105536 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.651 mas, bmaj=18.15 mas, bpa=2.809 degrees ! Estimated noise=1012.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117769 Jy ! Component: 100 - total flux cleaned = 0.00181003 Jy ! Component: 150 - total flux cleaned = 0.00222593 Jy ! Component: 200 - total flux cleaned = 0.0022671 Jy ! Total flux subtracted in 200 components = 0.0022671 Jy ! Clean residual min=-0.002095 max=0.002684 Jy/beam ! Clean residual mean=-0.000012 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.107803 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.76355e-05 Jy ! Component: 100 - total flux cleaned = 2.52999e-05 Jy ! Component: 150 - total flux cleaned = 1.35084e-05 Jy ! Component: 200 - total flux cleaned = 1.99458e-06 Jy ! Total flux subtracted in 200 components = 1.99458e-06 Jy ! Clean residual min=-0.002084 max=0.002671 Jy/beam ! Clean residual mean=-0.000011 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.107805 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 60 components and 0.107805 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.813 mas, bmaj=6.755 mas, bpa=-2.049 degrees ! Estimated noise=799.658 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000849892 Jy ! Component: 100 - total flux cleaned = -0.00085315 Jy ! Component: 150 - total flux cleaned = -0.000737822 Jy ! Component: 200 - total flux cleaned = -0.000685551 Jy ! Total flux subtracted in 200 components = -0.000685551 Jy ! Clean residual min=-0.002688 max=0.002353 Jy/beam ! Clean residual mean=-0.000006 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.107119 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 75 components and 0.107119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088935Jy sigma=0.000883 ! Fit after self-cal, rms=0.088883Jy sigma=0.000883 wmodel J0406-2355_S_2014_01_04_pus_map.mod ! Writing 75 model components to file: J0406-2355_S_2014_01_04_pus_map.mod wobs J0406-2355_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0406-2355_S_2014_01_04_pus_uvs.fits wwins J0406-2355_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0406-2355_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000743915 Jy ! Component: 100 - total flux cleaned = -0.00131543 Jy ! Component: 150 - total flux cleaned = -0.00181629 Jy ! Component: 200 - total flux cleaned = -0.00225659 Jy ! Component: 250 - total flux cleaned = -0.00267846 Jy ! Component: 300 - total flux cleaned = -0.00301728 Jy ! Component: 350 - total flux cleaned = -0.0032788 Jy ! Component: 400 - total flux cleaned = -0.00349999 Jy ! Component: 450 - total flux cleaned = -0.0036231 Jy ! Component: 500 - total flux cleaned = -0.00380262 Jy ! Component: 550 - total flux cleaned = -0.003948 Jy ! Component: 600 - total flux cleaned = -0.0039483 Jy ! Component: 650 - total flux cleaned = -0.00405941 Jy ! Component: 700 - total flux cleaned = -0.00411316 Jy ! Component: 750 - total flux cleaned = -0.00419214 Jy ! Component: 800 - total flux cleaned = -0.00426931 Jy ! Component: 850 - total flux cleaned = -0.0042944 Jy ! Component: 900 - total flux cleaned = -0.00441766 Jy ! Component: 950 - total flux cleaned = -0.00451389 Jy ! Component: 1000 - total flux cleaned = -0.0045375 Jy ! Component: 1050 - total flux cleaned = -0.00451465 Jy ! Component: 1100 - total flux cleaned = -0.00455975 Jy ! Component: 1150 - total flux cleaned = -0.00451482 Jy ! Component: 1200 - total flux cleaned = -0.00451511 Jy ! Component: 1250 - total flux cleaned = -0.00447221 Jy ! Component: 1300 - total flux cleaned = -0.00449379 Jy ! Component: 1350 - total flux cleaned = -0.00447281 Jy ! Component: 1400 - total flux cleaned = -0.00445203 Jy ! Component: 1450 - total flux cleaned = -0.00441185 Jy ! Component: 1500 - total flux cleaned = -0.0043922 Jy ! Component: 1550 - total flux cleaned = -0.00437262 Jy ! Component: 1600 - total flux cleaned = -0.00431475 Jy ! Component: 1650 - total flux cleaned = -0.00429574 Jy ! Component: 1700 - total flux cleaned = -0.00427688 Jy ! Component: 1750 - total flux cleaned = -0.00416532 Jy ! Component: 1800 - total flux cleaned = -0.00416546 Jy ! Component: 1850 - total flux cleaned = -0.00411123 Jy ! Component: 1900 - total flux cleaned = -0.00405781 Jy ! Component: 1950 - total flux cleaned = -0.00400504 Jy ! Component: 2000 - total flux cleaned = -0.00400507 Jy ! Component: 2050 - total flux cleaned = -0.00398795 Jy ! Component: 2100 - total flux cleaned = -0.00402208 Jy ! Component: 2150 - total flux cleaned = -0.00403881 Jy ! Component: 2200 - total flux cleaned = -0.00403904 Jy ! Component: 2250 - total flux cleaned = -0.00400626 Jy ! Component: 2300 - total flux cleaned = -0.00402244 Jy ! Component: 2350 - total flux cleaned = -0.0040064 Jy ! Component: 2400 - total flux cleaned = -0.0039905 Jy ! Component: 2450 - total flux cleaned = -0.00395934 Jy ! Component: 2500 - total flux cleaned = -0.0039748 Jy ! Component: 2550 - total flux cleaned = -0.00395953 Jy ! Component: 2600 - total flux cleaned = -0.00394454 Jy ! Component: 2650 - total flux cleaned = -0.00395972 Jy ! Component: 2700 - total flux cleaned = -0.00400435 Jy ! Component: 2750 - total flux cleaned = -0.00403388 Jy ! Component: 2800 - total flux cleaned = -0.00407762 Jy ! Component: 2850 - total flux cleaned = -0.0041208 Jy ! Component: 2900 - total flux cleaned = -0.00410645 Jy ! Component: 2950 - total flux cleaned = -0.00416305 Jy ! Component: 3000 - total flux cleaned = -0.00417699 Jy ! Component: 3050 - total flux cleaned = -0.00420465 Jy ! Component: 3100 - total flux cleaned = -0.0042047 Jy ! Component: 3150 - total flux cleaned = -0.00424544 Jy ! Component: 3200 - total flux cleaned = -0.00425876 Jy ! Component: 3250 - total flux cleaned = -0.00428556 Jy ! Component: 3300 - total flux cleaned = -0.00432546 Jy ! Component: 3350 - total flux cleaned = -0.00431201 Jy ! Component: 3400 - total flux cleaned = -0.00431185 Jy ! Component: 3450 - total flux cleaned = -0.00432477 Jy ! Component: 3500 - total flux cleaned = -0.0042989 Jy ! Component: 3550 - total flux cleaned = -0.00432474 Jy ! Component: 3600 - total flux cleaned = -0.00432468 Jy ! Component: 3650 - total flux cleaned = -0.00432465 Jy ! Component: 3700 - total flux cleaned = -0.00434985 Jy ! Component: 3750 - total flux cleaned = -0.00436237 Jy ! Component: 3800 - total flux cleaned = -0.00434982 Jy ! Component: 3850 - total flux cleaned = -0.00437462 Jy ! Component: 3900 - total flux cleaned = -0.00436226 Jy ! Component: 3950 - total flux cleaned = -0.00436229 Jy ! Component: 4000 - total flux cleaned = -0.00433791 Jy ! Component: 4050 - total flux cleaned = -0.00433785 Jy ! Total flux subtracted in 4096 components = -0.00430174 Jy ! Clean residual min=-0.000727 max=0.000838 Jy/beam ! Clean residual mean=-0.000000 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.102817 Jy keep ! Adding 242 model components to the UV plane model. ! The established model now contains 317 components and 0.102817 Jy ![Exited script file: muppet] wmap "J0406-2355_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.813 x 6.755 at -2.049 degrees (North through East) ! Clean map min=-0.002332 max=0.080025 Jy/beam ! Writing clean map to FITS file: J0406-2355_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0800255 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000197658 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.740982 0.740982 1.48196 2.96393 5.92786 11.8557 23.7114 47.4229 94.8458 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.08 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.813 x 6.755 at -2.049 degrees (North through East) ! Clean map min=-0.002332 max=0.080025 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0406-2355_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:16:23 2017