! Started logfile: J0403-3605_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:16:14 2017 obs J0403-3605_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0403-3605_S_2014_01_04_pus_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.466667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0403-3605 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4032 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0403-3605_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.382455Jy sigma=0.003258 ! Fit after self-cal, rms=0.361608Jy sigma=0.003096 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.377 mas, bmaj=6.369 mas, bpa=-3.768 degrees ! Estimated noise=1959.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.528639 Jy ! Component: 100 - total flux cleaned = 0.663889 Jy ! Total flux subtracted in 100 components = 0.663889 Jy ! Clean residual min=-0.033178 max=0.053654 Jy/beam ! Clean residual mean=-0.000239 rms=0.008254 Jy/beam ! Combined flux in latest and established models = 0.66389 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.66389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252610Jy sigma=0.001620 ! Fit after self-cal, rms=0.252567Jy sigma=0.001618 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.054943 Jy ! Component: 100 - total flux cleaned = 0.0805276 Jy ! Total flux subtracted in 100 components = 0.0805276 Jy ! Clean residual min=-0.029759 max=0.039005 Jy/beam ! Clean residual mean=-0.000236 rms=0.007044 Jy/beam ! Combined flux in latest and established models = 0.744417 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 17 components and 0.744417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230065Jy sigma=0.001488 ! Fit after self-cal, rms=0.230101Jy sigma=0.001488 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.873 mas, bmaj=7.623 mas, bpa=-4.118 degrees ! Estimated noise=1342.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0268594 Jy ! Component: 100 - total flux cleaned = 0.0385193 Jy ! Component: 150 - total flux cleaned = 0.0412523 Jy ! Component: 200 - total flux cleaned = 0.0421248 Jy ! Total flux subtracted in 200 components = 0.0421248 Jy ! Clean residual min=-0.029151 max=0.037727 Jy/beam ! Clean residual mean=-0.000661 rms=0.008529 Jy/beam ! Combined flux in latest and established models = 0.786542 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 29 components and 0.786542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223730Jy sigma=0.001493 ! Fit after self-cal, rms=0.223705Jy sigma=0.001493 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* KP 1.00* LA 1.01 ! MK 0.97 NL 1.08 OV 0.95 PT 1.00 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* KP 1.00* LA 0.96 ! MK 0.97 NL 1.14 OV 1.01 PT 0.97 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* KP 1.00* LA 0.80 ! MK 0.98 NL 1.10 OV 0.93 PT 0.94 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.35 FD 1.00* KP 1.00* LA 0.86 ! MK 0.96 NL 1.19 OV 0.99 PT 0.96 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.223705Jy sigma=0.001493 ! Fit after self-cal, rms=0.213333Jy sigma=0.001189 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.85 mas, bmaj=7.608 mas, bpa=-4.212 degrees ! Estimated noise=1353.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102382 Jy ! Component: 100 - total flux cleaned = 0.0131795 Jy ! Component: 150 - total flux cleaned = 0.0131729 Jy ! Component: 200 - total flux cleaned = 0.0131714 Jy ! Total flux subtracted in 200 components = 0.0131714 Jy ! Clean residual min=-0.023384 max=0.022821 Jy/beam ! Clean residual mean=-0.000109 rms=0.005641 Jy/beam ! Combined flux in latest and established models = 0.799713 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.799713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212109Jy sigma=0.001189 ! Fit after self-cal, rms=0.212049Jy sigma=0.001188 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212049Jy sigma=0.001188 ! Fit after self-cal, rms=0.230414Jy sigma=0.001166 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.833 mas, bmaj=7.587 mas, bpa=-4.381 degrees ! Estimated noise=1374.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130305 Jy ! Component: 100 - total flux cleaned = 0.0187133 Jy ! Component: 150 - total flux cleaned = 0.0196403 Jy ! Component: 200 - total flux cleaned = 0.0201822 Jy ! Total flux subtracted in 200 components = 0.0201822 Jy ! Clean residual min=-0.022648 max=0.018515 Jy/beam ! Clean residual mean=-0.000017 rms=0.005270 Jy/beam ! Combined flux in latest and established models = 0.819896 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 40 components and 0.819896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228572Jy sigma=0.001165 ! Fit after self-cal, rms=0.228563Jy sigma=0.001165 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000659235 Jy ! Component: 100 - total flux cleaned = 0.000647453 Jy ! Component: 150 - total flux cleaned = 0.000728402 Jy ! Component: 200 - total flux cleaned = 0.000803088 Jy ! Total flux subtracted in 200 components = 0.000803088 Jy ! Clean residual min=-0.022771 max=0.018103 Jy/beam ! Clean residual mean=-0.000016 rms=0.005261 Jy/beam ! Combined flux in latest and established models = 0.820699 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.820699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228418Jy sigma=0.001165 ! Fit after self-cal, rms=0.228398Jy sigma=0.001165 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228398Jy sigma=0.001165 ! Fit after self-cal, rms=0.115264Jy sigma=0.000892 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.829 mas, bmaj=7.575 mas, bpa=-4.399 degrees ! Estimated noise=1371.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00048797 Jy ! Component: 100 - total flux cleaned = 5.3457e-05 Jy ! Component: 150 - total flux cleaned = -2.55638e-05 Jy ! Component: 200 - total flux cleaned = 3.77622e-05 Jy ! Total flux subtracted in 200 components = 3.77622e-05 Jy ! Clean residual min=-0.006987 max=0.010457 Jy/beam ! Clean residual mean=-0.000056 rms=0.001937 Jy/beam ! Combined flux in latest and established models = 0.820736 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 47 components and 0.820736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115165Jy sigma=0.000891 ! Fit after self-cal, rms=0.115048Jy sigma=0.000890 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, 48.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00968221 Jy ! Component: 100 - total flux cleaned = 0.0106909 Jy ! Component: 150 - total flux cleaned = 0.0104316 Jy ! Component: 200 - total flux cleaned = 0.0101954 Jy ! Total flux subtracted in 200 components = 0.0101954 Jy ! Clean residual min=-0.006837 max=0.006675 Jy/beam ! Clean residual mean=-0.000006 rms=0.001596 Jy/beam ! Combined flux in latest and established models = 0.830932 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 68 components and 0.830932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114227Jy sigma=0.000882 ! Fit after self-cal, rms=0.114150Jy sigma=0.000882 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114150Jy sigma=0.000882 ! Fit after self-cal, rms=0.113723Jy sigma=0.000881 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.584 mas, bmaj=23.01 mas, bpa=-2.481 degrees ! Estimated noise=1764.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035742 Jy ! Component: 100 - total flux cleaned = 0.003457 Jy ! Component: 150 - total flux cleaned = 0.00346135 Jy ! Component: 200 - total flux cleaned = 0.00346159 Jy ! Total flux subtracted in 200 components = 0.00346159 Jy ! Clean residual min=-0.006136 max=0.007785 Jy/beam ! Clean residual mean=-0.000024 rms=0.002046 Jy/beam ! Combined flux in latest and established models = 0.834393 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 71 components and 0.834393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113663Jy sigma=0.000881 ! Fit after self-cal, rms=0.113559Jy sigma=0.000880 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00057206 Jy ! Component: 100 - total flux cleaned = 0.000493559 Jy ! Component: 150 - total flux cleaned = 0.000346567 Jy ! Component: 200 - total flux cleaned = 0.000206596 Jy ! Total flux subtracted in 200 components = 0.000206596 Jy ! Clean residual min=-0.006147 max=0.007299 Jy/beam ! Clean residual mean=-0.000018 rms=0.001992 Jy/beam ! Combined flux in latest and established models = 0.8346 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 74 components and 0.8346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113578Jy sigma=0.000880 ! Fit after self-cal, rms=0.113502Jy sigma=0.000880 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.823 mas, bmaj=7.564 mas, bpa=-4.429 degrees ! Estimated noise=1367.74 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.823 x 7.564 at -4.429 degrees (North through East) ! Clean map min=-0.0067065 max=0.68587 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113502Jy sigma=0.000880 ! Fit after self-cal, rms=0.101015Jy sigma=0.000761 ! Inverting map and beam ! Estimated beam: bmin=2.823 mas, bmaj=7.563 mas, bpa=-4.377 degrees ! Estimated noise=1369.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268092 Jy ! Component: 100 - total flux cleaned = 0.00277609 Jy ! Component: 150 - total flux cleaned = 0.00269613 Jy ! Component: 200 - total flux cleaned = 0.00262395 Jy ! Total flux subtracted in 200 components = 0.00262395 Jy ! Clean residual min=-0.005973 max=0.005754 Jy/beam ! Clean residual mean=-0.000023 rms=0.001431 Jy/beam ! Combined flux in latest and established models = 0.837224 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 88 components and 0.837224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100825Jy sigma=0.000760 ! Fit after self-cal, rms=0.100811Jy sigma=0.000760 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000593637 Jy ! Component: 100 - total flux cleaned = 0.000522088 Jy ! Component: 150 - total flux cleaned = 0.000388944 Jy ! Component: 200 - total flux cleaned = 0.000327138 Jy ! Total flux subtracted in 200 components = 0.000327138 Jy ! Clean residual min=-0.005914 max=0.005563 Jy/beam ! Clean residual mean=-0.000022 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 0.837551 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 94 components and 0.837551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100703Jy sigma=0.000759 ! Fit after self-cal, rms=0.100692Jy sigma=0.000759 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100692Jy sigma=0.000759 ! Fit after self-cal, rms=0.100628Jy sigma=0.000759 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.338 mas, bmaj=6.356 mas, bpa=-3.928 degrees ! Estimated noise=2010.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.541872 Jy ! Component: 100 - total flux cleaned = 0.690084 Jy ! Component: 150 - total flux cleaned = 0.750485 Jy ! Component: 200 - total flux cleaned = 0.777672 Jy ! Total flux subtracted in 200 components = 0.777672 Jy ! Clean residual min=-0.010372 max=0.015608 Jy/beam ! Clean residual mean=-0.000051 rms=0.002836 Jy/beam ! Combined flux in latest and established models = 0.777671 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.777671 Jy ! Inverting map and beam ! Estimated beam: bmin=2.822 mas, bmaj=7.561 mas, bpa=-4.398 degrees ! Estimated noise=1368.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.022518 Jy ! Component: 100 - total flux cleaned = 0.035753 Jy ! Component: 150 - total flux cleaned = 0.0447747 Jy ! Component: 200 - total flux cleaned = 0.0500448 Jy ! Total flux subtracted in 200 components = 0.0500448 Jy ! Clean residual min=-0.007776 max=0.011086 Jy/beam ! Clean residual mean=-0.000053 rms=0.001885 Jy/beam ! Combined flux in latest and established models = 0.827716 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 52 components and 0.827716 Jy ! Inverting map ! Added new window around map position (3.5, 16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00719583 Jy ! Component: 100 - total flux cleaned = 0.00863518 Jy ! Component: 150 - total flux cleaned = 0.00895928 Jy ! Component: 200 - total flux cleaned = 0.00909426 Jy ! Total flux subtracted in 200 components = 0.00909426 Jy ! Clean residual min=-0.005949 max=0.006699 Jy/beam ! Clean residual mean=-0.000033 rms=0.001465 Jy/beam ! Combined flux in latest and established models = 0.83681 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 65 components and 0.83681 Jy ! Inverting map ! Added new window around map position (-101, -78.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00526766 Jy ! Component: 100 - total flux cleaned = 0.00539284 Jy ! Component: 150 - total flux cleaned = 0.00550316 Jy ! Component: 200 - total flux cleaned = 0.00550183 Jy ! Total flux subtracted in 200 components = 0.00550183 Jy ! Clean residual min=-0.005190 max=0.005144 Jy/beam ! Clean residual mean=-0.000031 rms=0.001339 Jy/beam ! Combined flux in latest and established models = 0.842312 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 84 components and 0.842312 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.58 mas, bmaj=22.99 mas, bpa=-2.473 degrees ! Estimated noise=1766.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000606309 Jy ! Component: 100 - total flux cleaned = 0.000393404 Jy ! Component: 150 - total flux cleaned = 0.000206934 Jy ! Component: 200 - total flux cleaned = -0.000120287 Jy ! Total flux subtracted in 200 components = -0.000120287 Jy ! Clean residual min=-0.005432 max=0.005583 Jy/beam ! Clean residual mean=-0.000075 rms=0.001726 Jy/beam ! Combined flux in latest and established models = 0.842192 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000149723 Jy ! Component: 100 - total flux cleaned = -0.000290206 Jy ! Component: 150 - total flux cleaned = -0.000424238 Jy ! Component: 200 - total flux cleaned = -0.000484985 Jy ! Total flux subtracted in 200 components = -0.000484985 Jy ! Clean residual min=-0.005285 max=0.005380 Jy/beam ! Clean residual mean=-0.000077 rms=0.001655 Jy/beam ! Combined flux in latest and established models = 0.841707 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 105 components and 0.841707 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.822 mas, bmaj=7.561 mas, bpa=-4.398 degrees ! Estimated noise=1368.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000390979 Jy ! Component: 100 - total flux cleaned = -0.000180526 Jy ! Component: 150 - total flux cleaned = -0.000274418 Jy ! Component: 200 - total flux cleaned = -0.000187904 Jy ! Total flux subtracted in 200 components = -0.000187904 Jy ! Clean residual min=-0.004580 max=0.004873 Jy/beam ! Clean residual mean=-0.000034 rms=0.001217 Jy/beam ! Combined flux in latest and established models = 0.841519 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 123 components and 0.841519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099944Jy sigma=0.000755 ! Fit after self-cal, rms=0.099768Jy sigma=0.000754 wmodel J0403-3605_S_2014_01_04_pus_map.mod ! Writing 123 model components to file: J0403-3605_S_2014_01_04_pus_map.mod wobs J0403-3605_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0403-3605_S_2014_01_04_pus_uvs.fits wwins J0403-3605_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J0403-3605_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000286885 Jy ! Component: 100 - total flux cleaned = 0.000182683 Jy ! Component: 150 - total flux cleaned = 0.000623624 Jy ! Component: 200 - total flux cleaned = 0.000764714 Jy ! Component: 250 - total flux cleaned = 0.00069834 Jy ! Component: 300 - total flux cleaned = 0.000311852 Jy ! Component: 350 - total flux cleaned = 0.000125969 Jy ! Component: 400 - total flux cleaned = -0.000116434 Jy ! Component: 450 - total flux cleaned = -0.000352332 Jy ! Component: 500 - total flux cleaned = -0.000525076 Jy ! Component: 550 - total flux cleaned = -0.000637756 Jy ! Component: 600 - total flux cleaned = -0.000801912 Jy ! Component: 650 - total flux cleaned = -0.00074922 Jy ! Component: 700 - total flux cleaned = -0.000697878 Jy ! Component: 750 - total flux cleaned = -0.000748723 Jy ! Component: 800 - total flux cleaned = -0.000697754 Jy ! Component: 850 - total flux cleaned = -0.000648368 Jy ! Component: 900 - total flux cleaned = -0.00050388 Jy ! Component: 950 - total flux cleaned = -0.000504697 Jy ! Component: 1000 - total flux cleaned = -0.000413097 Jy ! Component: 1050 - total flux cleaned = -0.000277425 Jy ! Component: 1100 - total flux cleaned = -0.000233658 Jy ! Component: 1150 - total flux cleaned = -0.000103487 Jy ! Component: 1200 - total flux cleaned = -6.0927e-05 Jy ! Component: 1250 - total flux cleaned = 2.35654e-05 Jy ! Component: 1300 - total flux cleaned = 0.00010575 Jy ! Component: 1350 - total flux cleaned = 0.000105221 Jy ! Component: 1400 - total flux cleaned = 0.000305923 Jy ! Component: 1450 - total flux cleaned = 0.0005029 Jy ! Component: 1500 - total flux cleaned = 0.000579802 Jy ! Component: 1550 - total flux cleaned = 0.000656784 Jy ! Component: 1600 - total flux cleaned = 0.000922107 Jy ! Component: 1650 - total flux cleaned = 0.000885295 Jy ! Component: 1700 - total flux cleaned = 0.00110706 Jy ! Component: 1750 - total flux cleaned = 0.00117964 Jy ! Component: 1800 - total flux cleaned = 0.00125165 Jy ! Component: 1850 - total flux cleaned = 0.00125194 Jy ! Component: 1900 - total flux cleaned = 0.00135726 Jy ! Component: 1950 - total flux cleaned = 0.00139263 Jy ! Component: 2000 - total flux cleaned = 0.00152934 Jy ! Component: 2050 - total flux cleaned = 0.00153002 Jy ! Component: 2100 - total flux cleaned = 0.00159663 Jy ! Component: 2150 - total flux cleaned = 0.00172812 Jy ! Component: 2200 - total flux cleaned = 0.00179277 Jy ! Component: 2250 - total flux cleaned = 0.00188913 Jy ! Component: 2300 - total flux cleaned = 0.00188892 Jy ! Component: 2350 - total flux cleaned = 0.00192016 Jy ! Component: 2400 - total flux cleaned = 0.00198206 Jy ! Component: 2450 - total flux cleaned = 0.00204327 Jy ! Component: 2500 - total flux cleaned = 0.0020732 Jy ! Component: 2550 - total flux cleaned = 0.0022228 Jy ! Component: 2600 - total flux cleaned = 0.00228205 Jy ! Component: 2650 - total flux cleaned = 0.00234064 Jy ! Component: 2700 - total flux cleaned = 0.00231202 Jy ! Component: 2750 - total flux cleaned = 0.00248361 Jy ! Component: 2800 - total flux cleaned = 0.00259661 Jy ! Component: 2850 - total flux cleaned = 0.00265218 Jy ! Component: 2900 - total flux cleaned = 0.0026247 Jy ! Component: 2950 - total flux cleaned = 0.00273473 Jy ! Component: 3000 - total flux cleaned = 0.00270776 Jy ! Component: 3050 - total flux cleaned = 0.00281543 Jy ! Component: 3100 - total flux cleaned = 0.00284177 Jy ! Component: 3150 - total flux cleaned = 0.00281526 Jy ! Component: 3200 - total flux cleaned = 0.00286732 Jy ! Component: 3250 - total flux cleaned = 0.0028153 Jy ! Component: 3300 - total flux cleaned = 0.00284107 Jy ! Component: 3350 - total flux cleaned = 0.0028409 Jy ! Component: 3400 - total flux cleaned = 0.00289097 Jy ! Component: 3450 - total flux cleaned = 0.00291582 Jy ! Component: 3500 - total flux cleaned = 0.00289124 Jy ! Component: 3550 - total flux cleaned = 0.00296421 Jy ! Component: 3600 - total flux cleaned = 0.00306034 Jy ! Component: 3650 - total flux cleaned = 0.00296466 Jy ! Component: 3700 - total flux cleaned = 0.00305957 Jy ! Component: 3750 - total flux cleaned = 0.00303592 Jy ! Component: 3800 - total flux cleaned = 0.00310569 Jy ! Component: 3850 - total flux cleaned = 0.00310577 Jy ! Component: 3900 - total flux cleaned = 0.00310575 Jy ! Component: 3950 - total flux cleaned = 0.00317406 Jy ! Component: 4000 - total flux cleaned = 0.00321898 Jy ! Component: 4050 - total flux cleaned = 0.00324148 Jy ! Total flux subtracted in 4096 components = 0.00324152 Jy ! Clean residual min=-0.001730 max=0.001368 Jy/beam ! Clean residual mean=-0.000007 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.844761 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 392 components and 0.84476 Jy ![Exited script file: muppet] wmap "J0403-3605_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.822 x 7.561 at -4.398 degrees (North through East) ! Clean map min=-0.0051596 max=0.69389 Jy/beam ! Writing clean map to FITS file: J0403-3605_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.693893 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000395152 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.170841 0.170841 0.341683 0.683366 1.36673 2.73346 5.46693 10.9339 21.8677 43.7354 87.4708 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.693 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.822 x 7.561 at -4.398 degrees (North through East) ! Clean map min=-0.0051596 max=0.69389 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0403-3605_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:16:19 2017