! Started logfile: J0401-1606_S_2014_08_09_pus_uvs.log on Tue Nov 29 22:53:38 2016 obs J0401-1606_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J0401-1606_S_2014_08_09_pus_uva.fits ! AN table 1: 82 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.771274 visibilities/baseline/integration-bin. ! Found source: J0401-1606 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 11384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0401-1606_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.897733Jy sigma=0.009111 ! Fit after self-cal, rms=0.871687Jy sigma=0.008846 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.362 mas, bmaj=10.48 mas, bpa=13.22 degrees ! Estimated noise=1016.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101185 Jy ! Component: 100 - total flux cleaned = 0.12325 Jy ! Total flux subtracted in 100 components = 0.12325 Jy ! Clean residual min=-0.004233 max=0.006155 Jy/beam ! Clean residual mean=-0.000014 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.12325 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.12325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082534Jy sigma=0.000786 ! Fit after self-cal, rms=0.082532Jy sigma=0.000786 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.99 mas, bmaj=11.8 mas, bpa=12.59 degrees ! Estimated noise=663.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00653591 Jy ! Component: 100 - total flux cleaned = 0.00978993 Jy ! Component: 150 - total flux cleaned = 0.0118556 Jy ! Component: 200 - total flux cleaned = 0.0131931 Jy ! Total flux subtracted in 200 components = 0.0131931 Jy ! Clean residual min=-0.002608 max=0.002764 Jy/beam ! Clean residual mean=-0.000008 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.136444 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.136444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081875Jy sigma=0.000782 ! Fit after self-cal, rms=0.081884Jy sigma=0.000782 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.86 HN 0.99 KP 1.08 ! LA 1.14 MK 1.00* NL 1.00 OV 0.99 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 1.08 KP 1.03 ! LA 1.07 MK 1.00* NL 1.04 OV 0.98 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.12 HN 1.04 KP 0.90 ! LA 0.87 MK 1.00* NL 0.97 OV 0.94 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 0.99 KP 0.87 ! LA 0.81 MK 1.00* NL 1.06 OV 0.96 ! PT 1.02 SC 0.96 ! ! ! Fit before self-cal, rms=0.081884Jy sigma=0.000782 ! Fit after self-cal, rms=0.079157Jy sigma=0.000770 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.996 mas, bmaj=11.85 mas, bpa=12.55 degrees ! Estimated noise=663.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000530598 Jy ! Component: 100 - total flux cleaned = -0.000679278 Jy ! Component: 150 - total flux cleaned = -0.000758182 Jy ! Component: 200 - total flux cleaned = -0.000828385 Jy ! Total flux subtracted in 200 components = -0.000828385 Jy ! Clean residual min=-0.002152 max=0.002120 Jy/beam ! Clean residual mean=-0.000005 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.135615 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 62 components and 0.135615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079149Jy sigma=0.000770 ! Fit after self-cal, rms=0.079141Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079141Jy sigma=0.000770 ! Fit after self-cal, rms=0.079236Jy sigma=0.000768 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.997 mas, bmaj=11.87 mas, bpa=12.56 degrees ! Estimated noise=663.527 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000536178 Jy ! Component: 100 - total flux cleaned = -0.000579371 Jy ! Component: 150 - total flux cleaned = -0.000602642 Jy ! Component: 200 - total flux cleaned = -0.000613281 Jy ! Total flux subtracted in 200 components = -0.000613281 Jy ! Clean residual min=-0.002103 max=0.001897 Jy/beam ! Clean residual mean=-0.000002 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.135002 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 71 components and 0.135002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079230Jy sigma=0.000768 ! Fit after self-cal, rms=0.079236Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.2126e-05 Jy ! Component: 100 - total flux cleaned = -4.99522e-05 Jy ! Component: 150 - total flux cleaned = -5.79647e-05 Jy ! Component: 200 - total flux cleaned = -6.57993e-05 Jy ! Total flux subtracted in 200 components = -6.57993e-05 Jy ! Clean residual min=-0.002101 max=0.001910 Jy/beam ! Clean residual mean=-0.000002 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.134936 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 78 components and 0.134936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079234Jy sigma=0.000768 ! Fit after self-cal, rms=0.079233Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079233Jy sigma=0.000768 ! Fit after self-cal, rms=0.079367Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.998 mas, bmaj=11.89 mas, bpa=12.59 degrees ! Estimated noise=663.865 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00026197 Jy ! Component: 100 - total flux cleaned = -0.000293645 Jy ! Component: 150 - total flux cleaned = -0.000320005 Jy ! Component: 200 - total flux cleaned = -0.000335386 Jy ! Total flux subtracted in 200 components = -0.000335386 Jy ! Clean residual min=-0.002109 max=0.001887 Jy/beam ! Clean residual mean=-0.000001 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.134601 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 85 components and 0.134601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079363Jy sigma=0.000768 ! Fit after self-cal, rms=0.079366Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.43251e-06 Jy ! Component: 100 - total flux cleaned = -2.20321e-05 Jy ! Component: 150 - total flux cleaned = -2.82424e-05 Jy ! Component: 200 - total flux cleaned = -4.03821e-05 Jy ! Total flux subtracted in 200 components = -4.03821e-05 Jy ! Clean residual min=-0.002100 max=0.001898 Jy/beam ! Clean residual mean=-0.000001 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.13456 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 90 components and 0.13456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079364Jy sigma=0.000768 ! Fit after self-cal, rms=0.079364Jy sigma=0.000768 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079364Jy sigma=0.000768 ! Fit after self-cal, rms=0.079467Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.985 mas, bmaj=16.12 mas, bpa=2.084 degrees ! Estimated noise=766.922 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000242883 Jy ! Component: 100 - total flux cleaned = -0.000276629 Jy ! Component: 150 - total flux cleaned = -0.000304244 Jy ! Component: 200 - total flux cleaned = -0.000329408 Jy ! Total flux subtracted in 200 components = -0.000329408 Jy ! Clean residual min=-0.002052 max=0.002135 Jy/beam ! Clean residual mean=-0.000003 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.134231 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 94 components and 0.134231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079466Jy sigma=0.000768 ! Fit after self-cal, rms=0.079468Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.19104e-05 Jy ! Component: 100 - total flux cleaned = -4.33849e-05 Jy ! Component: 150 - total flux cleaned = -5.85771e-05 Jy ! Component: 200 - total flux cleaned = -7.7427e-05 Jy ! Total flux subtracted in 200 components = -7.7427e-05 Jy ! Clean residual min=-0.002046 max=0.002142 Jy/beam ! Clean residual mean=-0.000003 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.134154 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 97 components and 0.134154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079469Jy sigma=0.000768 ! Fit after self-cal, rms=0.079469Jy sigma=0.000768 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.999 mas, bmaj=11.9 mas, bpa=12.61 degrees ! Estimated noise=664.335 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.999 x 11.9 at 12.61 degrees (North through East) ! Clean map min=-0.0020633 max=0.12977 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.348 mas, bmaj=10.55 mas, bpa=13.31 degrees ! Estimated noise=1020.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101538 Jy ! Component: 100 - total flux cleaned = 0.123686 Jy ! Component: 150 - total flux cleaned = 0.128735 Jy ! Component: 200 - total flux cleaned = 0.130685 Jy ! Total flux subtracted in 200 components = 0.130685 Jy ! Clean residual min=-0.003098 max=0.002670 Jy/beam ! Clean residual mean=0.000003 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.130685 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.130685 Jy ! Inverting map and beam ! Estimated beam: bmin=3.999 mas, bmaj=11.9 mas, bpa=12.61 degrees ! Estimated noise=664.335 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180544 Jy ! Component: 100 - total flux cleaned = 0.00266924 Jy ! Component: 150 - total flux cleaned = 0.00318085 Jy ! Component: 200 - total flux cleaned = 0.0034251 Jy ! Total flux subtracted in 200 components = 0.0034251 Jy ! Clean residual min=-0.002147 max=0.001919 Jy/beam ! Clean residual mean=-0.000002 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.13411 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 44 components and 0.13411 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.985 mas, bmaj=16.12 mas, bpa=2.084 degrees ! Estimated noise=766.922 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.21472e-05 Jy ! Component: 100 - total flux cleaned = -2.49343e-05 Jy ! Component: 150 - total flux cleaned = -3.20867e-05 Jy ! Component: 200 - total flux cleaned = -3.85927e-05 Jy ! Total flux subtracted in 200 components = -3.85927e-05 Jy ! Clean residual min=-0.002085 max=0.002148 Jy/beam ! Clean residual mean=-0.000003 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.134071 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.95777e-06 Jy ! Component: 100 - total flux cleaned = -1.64357e-05 Jy ! Component: 150 - total flux cleaned = -2.08905e-05 Jy ! Component: 200 - total flux cleaned = -2.51723e-05 Jy ! Total flux subtracted in 200 components = -2.51723e-05 Jy ! Clean residual min=-0.002072 max=0.002156 Jy/beam ! Clean residual mean=-0.000003 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.134046 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 62 components and 0.134046 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.999 mas, bmaj=11.9 mas, bpa=12.61 degrees ! Estimated noise=664.335 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.64985e-05 Jy ! Component: 100 - total flux cleaned = 1.81989e-05 Jy ! Component: 150 - total flux cleaned = 4.16411e-05 Jy ! Component: 200 - total flux cleaned = 7.35705e-05 Jy ! Total flux subtracted in 200 components = 7.35705e-05 Jy ! Clean residual min=-0.002131 max=0.001922 Jy/beam ! Clean residual mean=-0.000001 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.13412 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 68 components and 0.13412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079475Jy sigma=0.000768 ! Fit after self-cal, rms=0.079473Jy sigma=0.000768 wmodel J0401-1606_S_2014_08_09_pus_map.mod ! Writing 68 model components to file: J0401-1606_S_2014_08_09_pus_map.mod wobs J0401-1606_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J0401-1606_S_2014_08_09_pus_uvs.fits wwins J0401-1606_S_2014_08_09_pus_map.win ! wwins: Wrote 1 windows to J0401-1606_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000464762 Jy ! Component: 100 - total flux cleaned = -0.000592472 Jy ! Component: 150 - total flux cleaned = -0.000714059 Jy ! Component: 200 - total flux cleaned = -0.000658034 Jy ! Component: 250 - total flux cleaned = -0.000630584 Jy ! Component: 300 - total flux cleaned = -0.000709691 Jy ! Component: 350 - total flux cleaned = -0.000786818 Jy ! Component: 400 - total flux cleaned = -0.000812195 Jy ! Component: 450 - total flux cleaned = -0.000812734 Jy ! Component: 500 - total flux cleaned = -0.000860349 Jy ! Component: 550 - total flux cleaned = -0.000883745 Jy ! Component: 600 - total flux cleaned = -0.000861031 Jy ! Component: 650 - total flux cleaned = -0.000860631 Jy ! Component: 700 - total flux cleaned = -0.000817778 Jy ! Component: 750 - total flux cleaned = -0.00086042 Jy ! Component: 800 - total flux cleaned = -0.00081934 Jy ! Component: 850 - total flux cleaned = -0.000860225 Jy ! Component: 900 - total flux cleaned = -0.000840351 Jy ! Component: 950 - total flux cleaned = -0.00080145 Jy ! Component: 1000 - total flux cleaned = -0.000744213 Jy ! Component: 1050 - total flux cleaned = -0.000687418 Jy ! Component: 1100 - total flux cleaned = -0.000612935 Jy ! Component: 1150 - total flux cleaned = -0.000576352 Jy ! Component: 1200 - total flux cleaned = -0.000486237 Jy ! Component: 1250 - total flux cleaned = -0.000415203 Jy ! Component: 1300 - total flux cleaned = -0.000326936 Jy ! Component: 1350 - total flux cleaned = -0.000187567 Jy ! Component: 1400 - total flux cleaned = -0.000153125 Jy ! Component: 1450 - total flux cleaned = 1.65416e-05 Jy ! Component: 1500 - total flux cleaned = 4.99816e-05 Jy ! Component: 1550 - total flux cleaned = 0.000166035 Jy ! Component: 1600 - total flux cleaned = 0.000199035 Jy ! Component: 1650 - total flux cleaned = 0.000344602 Jy ! Component: 1700 - total flux cleaned = 0.000360605 Jy ! Component: 1750 - total flux cleaned = 0.000487373 Jy ! Component: 1800 - total flux cleaned = 0.000549767 Jy ! Component: 1850 - total flux cleaned = 0.000611486 Jy ! Component: 1900 - total flux cleaned = 0.000626992 Jy ! Component: 1950 - total flux cleaned = 0.000733196 Jy ! Component: 2000 - total flux cleaned = 0.000748514 Jy ! Component: 2050 - total flux cleaned = 0.000852843 Jy ! Component: 2100 - total flux cleaned = 0.00095626 Jy ! Component: 2150 - total flux cleaned = 0.00104388 Jy ! Component: 2200 - total flux cleaned = 0.00107282 Jy ! Component: 2250 - total flux cleaned = 0.00108727 Jy ! Component: 2300 - total flux cleaned = 0.0011727 Jy ! Component: 2350 - total flux cleaned = 0.00117246 Jy ! Component: 2400 - total flux cleaned = 0.00120056 Jy ! Component: 2450 - total flux cleaned = 0.0011868 Jy ! Component: 2500 - total flux cleaned = 0.00120071 Jy ! Component: 2550 - total flux cleaned = 0.00121435 Jy ! Component: 2600 - total flux cleaned = 0.00122798 Jy ! Component: 2650 - total flux cleaned = 0.00122795 Jy ! Component: 2700 - total flux cleaned = 0.00125476 Jy ! Component: 2750 - total flux cleaned = 0.00125488 Jy ! Component: 2800 - total flux cleaned = 0.00129438 Jy ! Component: 2850 - total flux cleaned = 0.00129438 Jy ! Component: 2900 - total flux cleaned = 0.00130757 Jy ! Component: 2950 - total flux cleaned = 0.00135903 Jy ! Component: 3000 - total flux cleaned = 0.0014101 Jy ! Component: 3050 - total flux cleaned = 0.00143546 Jy ! Component: 3100 - total flux cleaned = 0.00141042 Jy ! Component: 3150 - total flux cleaned = 0.00148536 Jy ! Component: 3200 - total flux cleaned = 0.00148548 Jy ! Component: 3250 - total flux cleaned = 0.0015348 Jy ! Component: 3300 - total flux cleaned = 0.00160836 Jy ! Component: 3350 - total flux cleaned = 0.00163266 Jy ! Component: 3400 - total flux cleaned = 0.00170526 Jy ! Component: 3450 - total flux cleaned = 0.00178917 Jy ! Component: 3500 - total flux cleaned = 0.00180095 Jy ! Component: 3550 - total flux cleaned = 0.00181282 Jy ! Component: 3600 - total flux cleaned = 0.00183653 Jy ! Component: 3650 - total flux cleaned = 0.00186 Jy ! Component: 3700 - total flux cleaned = 0.00192972 Jy ! Component: 3750 - total flux cleaned = 0.00194137 Jy ! Component: 3800 - total flux cleaned = 0.00195281 Jy ! Component: 3850 - total flux cleaned = 0.00199865 Jy ! Component: 3900 - total flux cleaned = 0.00203277 Jy ! Component: 3950 - total flux cleaned = 0.00204406 Jy ! Component: 4000 - total flux cleaned = 0.00206655 Jy ! Component: 4050 - total flux cleaned = 0.00208892 Jy ! Total flux subtracted in 4096 components = 0.00211113 Jy ! Clean residual min=-0.000699 max=0.000616 Jy/beam ! Clean residual mean=-0.000003 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.136231 Jy keep ! Adding 312 model components to the UV plane model. ! The established model now contains 380 components and 0.136231 Jy ![Exited script file: muppet] wmap "J0401-1606_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.999 x 11.9 at 12.61 degrees (North through East) ! Clean map min=-0.0012977 max=0.12987 Jy/beam ! Writing clean map to FITS file: J0401-1606_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.12987 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000210617 device "J0401-1606_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0401-1606_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.486525 0.486525 0.97305 1.9461 3.8922 7.7844 15.5688 31.1376 62.2752 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.129 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.999 x 11.9 at 12.61 degrees (North through East) ! Clean map min=-0.0012977 max=0.12987 Jy/beam quit ! Quitting program ! Log file J0401-1606_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 22:53:43 2016