! Started logfile: J0359+6005_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:04:51 2017 obs J0359+6005_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0359+6005_S_2015_01_23_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.975794 visibilities/baseline/integration-bin. ! Found source: J0359+6005 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 9836 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0359+6005_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.716993Jy sigma=0.007474 ! Fit after self-cal, rms=0.675373Jy sigma=0.006924 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=4.037 mas, bpa=-85.39 degrees ! Estimated noise=1160.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.294708 Jy ! Component: 100 - total flux cleaned = 0.374391 Jy ! Total flux subtracted in 100 components = 0.374391 Jy ! Clean residual min=-0.047974 max=0.127731 Jy/beam ! Clean residual mean=0.000270 rms=0.013905 Jy/beam ! Combined flux in latest and established models = 0.374391 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.374391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307883Jy sigma=0.003107 ! Fit after self-cal, rms=0.307911Jy sigma=0.003105 ! Inverting map ! Added new window around map position (-2.5, -13.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115458 Jy ! Component: 100 - total flux cleaned = 0.181219 Jy ! Total flux subtracted in 100 components = 0.181219 Jy ! Clean residual min=-0.042216 max=0.070498 Jy/beam ! Clean residual mean=0.000208 rms=0.010308 Jy/beam ! Combined flux in latest and established models = 0.55561 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 35 components and 0.55561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245790Jy sigma=0.002307 ! Fit after self-cal, rms=0.236358Jy sigma=0.002198 ! Inverting map ! Added new window around map position (0.5, -17.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.071735 Jy ! Component: 100 - total flux cleaned = 0.118717 Jy ! Total flux subtracted in 100 components = 0.118717 Jy ! Clean residual min=-0.030691 max=0.041548 Jy/beam ! Clean residual mean=0.000172 rms=0.007123 Jy/beam ! Combined flux in latest and established models = 0.674327 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 51 components and 0.674327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206256Jy sigma=0.001744 ! Fit after self-cal, rms=0.202859Jy sigma=0.001696 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.77 mas, bmaj=4.791 mas, bpa=87.47 degrees ! Estimated noise=717.849 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0656543 Jy ! Component: 100 - total flux cleaned = 0.103596 Jy ! Component: 150 - total flux cleaned = 0.129762 Jy ! Component: 200 - total flux cleaned = 0.149373 Jy ! Total flux subtracted in 200 components = 0.149373 Jy ! Clean residual min=-0.021662 max=0.030092 Jy/beam ! Clean residual mean=0.000225 rms=0.006146 Jy/beam ! Combined flux in latest and established models = 0.8237 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 89 components and 0.8237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186561Jy sigma=0.001320 ! Fit after self-cal, rms=0.183864Jy sigma=0.001273 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.40 HN 0.97 KP 1.04 ! LA 0.94 MK 1.07 NL 1.00 OV 0.94 ! PT 0.96 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.50 HN 1.01 KP 0.97 ! LA 0.92 MK 1.06 NL 0.98 OV 0.96 ! PT 0.95 SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.83 HN 1.01 KP 0.84 ! LA 0.75 MK 1.05 NL 1.16 OV 0.90 ! PT 0.92 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.70 HN 0.95 KP 0.77 ! LA 0.79 MK 1.02 NL 1.05 OV 0.94 ! PT 0.97 SC 1.01 ! ! ! Fit before self-cal, rms=0.183864Jy sigma=0.001273 ! Fit after self-cal, rms=0.210828Jy sigma=0.000964 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.858 mas, bmaj=4.884 mas, bpa=87.12 degrees ! Estimated noise=705.355 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000175418 Jy ! Component: 100 - total flux cleaned = 0.00156259 Jy ! Component: 150 - total flux cleaned = 0.00225706 Jy ! Component: 200 - total flux cleaned = 0.00254842 Jy ! Total flux subtracted in 200 components = 0.00254842 Jy ! Clean residual min=-0.010492 max=0.014535 Jy/beam ! Clean residual mean=0.000081 rms=0.002442 Jy/beam ! Combined flux in latest and established models = 0.826249 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 101 components and 0.826249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208801Jy sigma=0.000915 ! Fit after self-cal, rms=0.208715Jy sigma=0.000906 ! Inverting map ! Added new window around map position (0.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00942955 Jy ! Component: 100 - total flux cleaned = 0.0105354 Jy ! Component: 150 - total flux cleaned = 0.0102274 Jy ! Component: 200 - total flux cleaned = 0.00946372 Jy ! Total flux subtracted in 200 components = 0.00946372 Jy ! Clean residual min=-0.008304 max=0.006852 Jy/beam ! Clean residual mean=0.000074 rms=0.001780 Jy/beam ! Combined flux in latest and established models = 0.835712 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 120 components and 0.835712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207337Jy sigma=0.000874 ! Fit after self-cal, rms=0.207277Jy sigma=0.000873 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207277Jy sigma=0.000873 ! Fit after self-cal, rms=0.192311Jy sigma=0.000848 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.857 mas, bmaj=4.892 mas, bpa=87.89 degrees ! Estimated noise=705.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194378 Jy ! Component: 100 - total flux cleaned = 0.00309176 Jy ! Component: 150 - total flux cleaned = 0.00431315 Jy ! Component: 200 - total flux cleaned = 0.00496657 Jy ! Total flux subtracted in 200 components = 0.00496657 Jy ! Clean residual min=-0.004124 max=0.004594 Jy/beam ! Clean residual mean=-0.000009 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.840679 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 137 components and 0.840679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191918Jy sigma=0.000839 ! Fit after self-cal, rms=0.191874Jy sigma=0.000838 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000580151 Jy ! Component: 100 - total flux cleaned = 0.000952399 Jy ! Component: 150 - total flux cleaned = 0.00083234 Jy ! Component: 200 - total flux cleaned = 0.000636557 Jy ! Total flux subtracted in 200 components = 0.000636557 Jy ! Clean residual min=-0.003517 max=0.003908 Jy/beam ! Clean residual mean=-0.000010 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.841316 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 148 components and 0.841316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191725Jy sigma=0.000834 ! Fit after self-cal, rms=0.191717Jy sigma=0.000834 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191717Jy sigma=0.000834 ! Fit after self-cal, rms=0.191958Jy sigma=0.000833 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.858 mas, bmaj=4.888 mas, bpa=87.64 degrees ! Estimated noise=702.674 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115313 Jy ! Component: 100 - total flux cleaned = 0.00187526 Jy ! Component: 150 - total flux cleaned = 0.00231891 Jy ! Component: 200 - total flux cleaned = 0.00255335 Jy ! Total flux subtracted in 200 components = 0.00255335 Jy ! Clean residual min=-0.003052 max=0.003428 Jy/beam ! Clean residual mean=-0.000005 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.843869 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 158 components and 0.843869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191850Jy sigma=0.000830 ! Fit after self-cal, rms=0.191852Jy sigma=0.000830 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185414 Jy ! Component: 100 - total flux cleaned = 0.000256837 Jy ! Component: 150 - total flux cleaned = 0.000322021 Jy ! Component: 200 - total flux cleaned = 0.000381146 Jy ! Total flux subtracted in 200 components = 0.000381146 Jy ! Clean residual min=-0.002904 max=0.003279 Jy/beam ! Clean residual mean=-0.000006 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.84425 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 162 components and 0.84425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191805Jy sigma=0.000829 ! Fit after self-cal, rms=0.191806Jy sigma=0.000829 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191806Jy sigma=0.000829 ! Fit after self-cal, rms=0.192091Jy sigma=0.000828 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.642 mas, bmaj=9.245 mas, bpa=74.92 degrees ! Estimated noise=893.065 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000554604 Jy ! Component: 100 - total flux cleaned = 0.000973258 Jy ! Component: 150 - total flux cleaned = 0.00122412 Jy ! Component: 200 - total flux cleaned = 0.00141238 Jy ! Total flux subtracted in 200 components = 0.00141238 Jy ! Clean residual min=-0.003255 max=0.004425 Jy/beam ! Clean residual mean=-0.000008 rms=0.001053 Jy/beam ! Combined flux in latest and established models = 0.845662 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 180 components and 0.845662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192065Jy sigma=0.000828 ! Fit after self-cal, rms=0.192072Jy sigma=0.000828 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (82, -111.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00417961 Jy ! Component: 100 - total flux cleaned = 0.00420388 Jy ! Component: 150 - total flux cleaned = 0.00412628 Jy ! Component: 200 - total flux cleaned = 0.00439917 Jy ! Total flux subtracted in 200 components = 0.00439917 Jy ! Clean residual min=-0.002991 max=0.003036 Jy/beam ! Clean residual mean=-0.000039 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.850062 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 233 components and 0.850062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191950Jy sigma=0.000826 ! Fit after self-cal, rms=0.191936Jy sigma=0.000826 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.858 mas, bmaj=4.887 mas, bpa=87.51 degrees ! Estimated noise=701.468 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.858 x 4.887 at 87.51 degrees (North through East) ! Clean map min=-0.0029661 max=0.34546 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=4.114 mas, bpa=-85.5 degrees ! Estimated noise=1145.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.299718 Jy ! Component: 100 - total flux cleaned = 0.442864 Jy ! Component: 150 - total flux cleaned = 0.53865 Jy ! Component: 200 - total flux cleaned = 0.607099 Jy ! Total flux subtracted in 200 components = 0.607099 Jy ! Clean residual min=-0.019822 max=0.038976 Jy/beam ! Clean residual mean=0.000092 rms=0.005916 Jy/beam ! Combined flux in latest and established models = 0.607098 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.607098 Jy ! Inverting map and beam ! Estimated beam: bmin=3.858 mas, bmaj=4.887 mas, bpa=87.51 degrees ! Estimated noise=701.468 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0717263 Jy ! Component: 100 - total flux cleaned = 0.118153 Jy ! Component: 150 - total flux cleaned = 0.15033 Jy ! Component: 200 - total flux cleaned = 0.173654 Jy ! Total flux subtracted in 200 components = 0.173654 Jy ! Clean residual min=-0.007589 max=0.013204 Jy/beam ! Clean residual mean=-0.000021 rms=0.002386 Jy/beam ! Combined flux in latest and established models = 0.780752 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 75 components and 0.780752 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171147 Jy ! Component: 100 - total flux cleaned = 0.0299398 Jy ! Component: 150 - total flux cleaned = 0.0396711 Jy ! Component: 200 - total flux cleaned = 0.0471012 Jy ! Total flux subtracted in 200 components = 0.0471012 Jy ! Clean residual min=-0.004254 max=0.005376 Jy/beam ! Clean residual mean=-0.000008 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.827853 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 102 components and 0.827853 Jy ! Inverting map ! Added new window around map position (3, 12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00601778 Jy ! Component: 100 - total flux cleaned = 0.0106574 Jy ! Component: 150 - total flux cleaned = 0.0133151 Jy ! Component: 200 - total flux cleaned = 0.0156505 Jy ! Total flux subtracted in 200 components = 0.0156505 Jy ! Clean residual min=-0.003256 max=0.003103 Jy/beam ! Clean residual mean=-0.000011 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.843504 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 120 components and 0.843504 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.642 mas, bmaj=9.245 mas, bpa=74.92 degrees ! Estimated noise=893.065 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00426503 Jy ! Component: 100 - total flux cleaned = 0.00620328 Jy ! Component: 150 - total flux cleaned = 0.0072737 Jy ! Component: 200 - total flux cleaned = 0.00744227 Jy ! Total flux subtracted in 200 components = 0.00744227 Jy ! Clean residual min=-0.003202 max=0.002700 Jy/beam ! Clean residual mean=-0.000039 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.850946 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015316 Jy ! Component: 100 - total flux cleaned = 0.00022245 Jy ! Component: 150 - total flux cleaned = 0.000414825 Jy ! Component: 200 - total flux cleaned = 0.000472544 Jy ! Total flux subtracted in 200 components = 0.000472544 Jy ! Clean residual min=-0.003141 max=0.002623 Jy/beam ! Clean residual mean=-0.000038 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.851419 Jy ! Adding 88 model components to the UV plane model. ! The established model now contains 201 components and 0.851419 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.858 mas, bmaj=4.887 mas, bpa=87.51 degrees ! Estimated noise=701.468 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000395649 Jy ! Component: 100 - total flux cleaned = 0.000133615 Jy ! Component: 150 - total flux cleaned = 0.000614615 Jy ! Component: 200 - total flux cleaned = 0.00091015 Jy ! Total flux subtracted in 200 components = 0.00091015 Jy ! Clean residual min=-0.002748 max=0.002588 Jy/beam ! Clean residual mean=-0.000019 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.852329 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 225 components and 0.852329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191879Jy sigma=0.000827 ! Fit after self-cal, rms=0.191860Jy sigma=0.000826 wmodel J0359+6005_S_2015_01_23_pus_map.mod ! Writing 225 model components to file: J0359+6005_S_2015_01_23_pus_map.mod wobs J0359+6005_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0359+6005_S_2015_01_23_pus_uvs.fits wwins J0359+6005_S_2015_01_23_pus_map.win ! wwins: Wrote 6 windows to J0359+6005_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000384809 Jy ! Component: 100 - total flux cleaned = -0.000690599 Jy ! Component: 150 - total flux cleaned = -0.00110934 Jy ! Component: 200 - total flux cleaned = -0.00139203 Jy ! Component: 250 - total flux cleaned = -0.00174217 Jy ! Component: 300 - total flux cleaned = -0.0020064 Jy ! Component: 350 - total flux cleaned = -0.00233647 Jy ! Component: 400 - total flux cleaned = -0.00265867 Jy ! Component: 450 - total flux cleaned = -0.0030779 Jy ! Component: 500 - total flux cleaned = -0.00331651 Jy ! Component: 550 - total flux cleaned = -0.00358585 Jy ! Component: 600 - total flux cleaned = -0.00388228 Jy ! Component: 650 - total flux cleaned = -0.00404426 Jy ! Component: 700 - total flux cleaned = -0.00417211 Jy ! Component: 750 - total flux cleaned = -0.00423473 Jy ! Component: 800 - total flux cleaned = -0.00435885 Jy ! Component: 850 - total flux cleaned = -0.00445018 Jy ! Component: 900 - total flux cleaned = -0.00450985 Jy ! Component: 950 - total flux cleaned = -0.00468698 Jy ! Component: 1000 - total flux cleaned = -0.00468648 Jy ! Component: 1050 - total flux cleaned = -0.00471565 Jy ! Component: 1100 - total flux cleaned = -0.00480122 Jy ! Component: 1150 - total flux cleaned = -0.00480094 Jy ! Component: 1200 - total flux cleaned = -0.00471767 Jy ! Component: 1250 - total flux cleaned = -0.00471757 Jy ! Component: 1300 - total flux cleaned = -0.0046629 Jy ! Component: 1350 - total flux cleaned = -0.00474323 Jy ! Component: 1400 - total flux cleaned = -0.00463733 Jy ! Component: 1450 - total flux cleaned = -0.00461109 Jy ! Component: 1500 - total flux cleaned = -0.00461102 Jy ! Component: 1550 - total flux cleaned = -0.00461073 Jy ! Component: 1600 - total flux cleaned = -0.00453464 Jy ! Component: 1650 - total flux cleaned = -0.00455967 Jy ! Component: 1700 - total flux cleaned = -0.00468335 Jy ! Component: 1750 - total flux cleaned = -0.00458519 Jy ! Component: 1800 - total flux cleaned = -0.00446396 Jy ! Component: 1850 - total flux cleaned = -0.0045123 Jy ! Component: 1900 - total flux cleaned = -0.00451226 Jy ! Component: 1950 - total flux cleaned = -0.00446517 Jy ! Component: 2000 - total flux cleaned = -0.00444181 Jy ! Component: 2050 - total flux cleaned = -0.00437264 Jy ! Component: 2100 - total flux cleaned = -0.00439526 Jy ! Component: 2150 - total flux cleaned = -0.00439507 Jy ! Component: 2200 - total flux cleaned = -0.00435 Jy ! Component: 2250 - total flux cleaned = -0.00426078 Jy ! Component: 2300 - total flux cleaned = -0.00426077 Jy ! Component: 2350 - total flux cleaned = -0.00415123 Jy ! Component: 2400 - total flux cleaned = -0.00415135 Jy ! Component: 2450 - total flux cleaned = -0.00400036 Jy ! Component: 2500 - total flux cleaned = -0.00393626 Jy ! Component: 2550 - total flux cleaned = -0.00385155 Jy ! Component: 2600 - total flux cleaned = -0.00380925 Jy ! Component: 2650 - total flux cleaned = -0.00370496 Jy ! Component: 2700 - total flux cleaned = -0.0036015 Jy ! Component: 2750 - total flux cleaned = -0.00360146 Jy ! Component: 2800 - total flux cleaned = -0.00354014 Jy ! Component: 2850 - total flux cleaned = -0.00347948 Jy ! Component: 2900 - total flux cleaned = -0.00333842 Jy ! Component: 2950 - total flux cleaned = -0.00325871 Jy ! Component: 3000 - total flux cleaned = -0.00319931 Jy ! Component: 3050 - total flux cleaned = -0.00323862 Jy ! Component: 3100 - total flux cleaned = -0.00314057 Jy ! Component: 3150 - total flux cleaned = -0.00300434 Jy ! Component: 3200 - total flux cleaned = -0.00292709 Jy ! Component: 3250 - total flux cleaned = -0.0029271 Jy ! Component: 3300 - total flux cleaned = -0.00285112 Jy ! Component: 3350 - total flux cleaned = -0.00281336 Jy ! Component: 3400 - total flux cleaned = -0.00279432 Jy ! Component: 3450 - total flux cleaned = -0.0026821 Jy ! Component: 3500 - total flux cleaned = -0.00266365 Jy ! Component: 3550 - total flux cleaned = -0.00255284 Jy ! Component: 3600 - total flux cleaned = -0.00255278 Jy ! Component: 3650 - total flux cleaned = -0.00255255 Jy ! Component: 3700 - total flux cleaned = -0.00249796 Jy ! Component: 3750 - total flux cleaned = -0.00246196 Jy ! Component: 3800 - total flux cleaned = -0.00235457 Jy ! Component: 3850 - total flux cleaned = -0.00230129 Jy ! Component: 3900 - total flux cleaned = -0.00237178 Jy ! Component: 3950 - total flux cleaned = -0.00233653 Jy ! Component: 4000 - total flux cleaned = -0.00224901 Jy ! Component: 4050 - total flux cleaned = -0.00211021 Jy ! Total flux subtracted in 4096 components = -0.00209292 Jy ! Clean residual min=-0.001001 max=0.000994 Jy/beam ! Clean residual mean=-0.000001 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.850236 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 534 components and 0.850236 Jy ![Exited script file: muppet] wmap "J0359+6005_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.858 x 4.887 at 87.51 degrees (North through East) ! Clean map min=-0.0017867 max=0.34559 Jy/beam ! Writing clean map to FITS file: J0359+6005_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.345594 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000315309 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.27371 0.27371 0.54742 1.09484 2.18968 4.37936 8.75872 17.5174 35.0349 70.0698 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.345 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.858 x 4.887 at 87.51 degrees (North through East) ! Clean map min=-0.0017867 max=0.34559 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0359+6005_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:04:57 2017