! Started logfile: J0357-0751_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:16:05 2017 obs J0357-0751_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0357-0751_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J0357-0751 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5472 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0357-0751_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.845102Jy sigma=0.010473 ! Fit after self-cal, rms=0.831497Jy sigma=0.010278 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.162 mas, bmaj=6.397 mas, bpa=-5.783 degrees ! Estimated noise=1368.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.127326 Jy ! Component: 100 - total flux cleaned = 0.159731 Jy ! Total flux subtracted in 100 components = 0.159731 Jy ! Clean residual min=-0.009311 max=0.013316 Jy/beam ! Clean residual mean=-0.000004 rms=0.002615 Jy/beam ! Combined flux in latest and established models = 0.159731 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.159731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098398Jy sigma=0.001016 ! Fit after self-cal, rms=0.098373Jy sigma=0.001015 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.757 mas, bmaj=7.62 mas, bpa=-8.016 degrees ! Estimated noise=823.896 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0197993 Jy ! Component: 100 - total flux cleaned = 0.0307884 Jy ! Component: 150 - total flux cleaned = 0.0376494 Jy ! Component: 200 - total flux cleaned = 0.0419965 Jy ! Total flux subtracted in 200 components = 0.0419965 Jy ! Clean residual min=-0.005492 max=0.008696 Jy/beam ! Clean residual mean=-0.000013 rms=0.001756 Jy/beam ! Combined flux in latest and established models = 0.201727 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 28 components and 0.201727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093468Jy sigma=0.000970 ! Fit after self-cal, rms=0.093203Jy sigma=0.000969 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* KP 1.00* LA 1.02 ! MK 1.03 NL 0.99 OV 0.95 PT 0.96 ! SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.00* KP 1.00* LA 0.97 ! MK 0.99 NL 1.09 OV 0.98 PT 0.97 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* KP 1.00* LA 0.79 ! MK 1.03 NL 0.99 OV 0.95 PT 0.94 ! SC 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* KP 1.00* LA 0.88 ! MK 1.00 NL 1.08 OV 1.01 PT 0.99 ! SC 0.91 ! ! ! Fit before self-cal, rms=0.093203Jy sigma=0.000969 ! Fit after self-cal, rms=0.090055Jy sigma=0.000939 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.728 mas, bmaj=7.676 mas, bpa=-7.127 degrees ! Estimated noise=824.443 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000494628 Jy ! Component: 100 - total flux cleaned = 0.000629577 Jy ! Component: 150 - total flux cleaned = 0.000631218 Jy ! Component: 200 - total flux cleaned = 0.000596461 Jy ! Total flux subtracted in 200 components = 0.000596461 Jy ! Clean residual min=-0.003670 max=0.004367 Jy/beam ! Clean residual mean=-0.000005 rms=0.000990 Jy/beam ! Combined flux in latest and established models = 0.202324 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.202324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089999Jy sigma=0.000939 ! Fit after self-cal, rms=0.089657Jy sigma=0.000938 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089657Jy sigma=0.000938 ! Fit after self-cal, rms=0.089146Jy sigma=0.000936 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.718 mas, bmaj=7.669 mas, bpa=-7.316 degrees ! Estimated noise=824.285 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000693273 Jy ! Component: 100 - total flux cleaned = 0.000697285 Jy ! Component: 150 - total flux cleaned = 0.000697204 Jy ! Component: 200 - total flux cleaned = 0.000725737 Jy ! Total flux subtracted in 200 components = 0.000725737 Jy ! Clean residual min=-0.003198 max=0.004344 Jy/beam ! Clean residual mean=-0.000004 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.203049 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.203049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089102Jy sigma=0.000935 ! Fit after self-cal, rms=0.089102Jy sigma=0.000935 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00372857 Jy ! Component: 100 - total flux cleaned = 0.00469487 Jy ! Component: 150 - total flux cleaned = 0.0050721 Jy ! Component: 200 - total flux cleaned = 0.00539502 Jy ! Total flux subtracted in 200 components = 0.00539502 Jy ! Clean residual min=-0.002734 max=0.002985 Jy/beam ! Clean residual mean=-0.000002 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.208444 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 68 components and 0.208444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088931Jy sigma=0.000933 ! Fit after self-cal, rms=0.088918Jy sigma=0.000933 ! Inverting map ! Added new window around map position (104, -48.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225666 Jy ! Component: 100 - total flux cleaned = 0.00305578 Jy ! Component: 150 - total flux cleaned = 0.00387837 Jy ! Component: 200 - total flux cleaned = 0.00404641 Jy ! Total flux subtracted in 200 components = 0.00404641 Jy ! Clean residual min=-0.002295 max=0.001976 Jy/beam ! Clean residual mean=-0.000001 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.212491 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 91 components and 0.212491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088811Jy sigma=0.000932 ! Fit after self-cal, rms=0.088801Jy sigma=0.000932 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088801Jy sigma=0.000932 ! Fit after self-cal, rms=0.088790Jy sigma=0.000931 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.714 mas, bmaj=7.665 mas, bpa=-7.474 degrees ! Estimated noise=823.532 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000841367 Jy ! Component: 100 - total flux cleaned = 0.00117751 Jy ! Component: 150 - total flux cleaned = 0.00133074 Jy ! Component: 200 - total flux cleaned = 0.00147038 Jy ! Total flux subtracted in 200 components = 0.00147038 Jy ! Clean residual min=-0.002052 max=0.001846 Jy/beam ! Clean residual mean=-0.000001 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.213961 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 106 components and 0.213961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088748Jy sigma=0.000931 ! Fit after self-cal, rms=0.088753Jy sigma=0.000931 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000409015 Jy ! Component: 100 - total flux cleaned = 0.000470827 Jy ! Component: 150 - total flux cleaned = 0.000470198 Jy ! Component: 200 - total flux cleaned = 0.000526431 Jy ! Total flux subtracted in 200 components = 0.000526431 Jy ! Clean residual min=-0.001977 max=0.001820 Jy/beam ! Clean residual mean=-0.000001 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.214488 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 110 components and 0.214488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088728Jy sigma=0.000931 ! Fit after self-cal, rms=0.088731Jy sigma=0.000931 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088731Jy sigma=0.000931 ! Fit after self-cal, rms=0.088892Jy sigma=0.000931 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.854 mas, bmaj=12.53 mas, bpa=0.3981 degrees ! Estimated noise=992.667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000633871 Jy ! Component: 100 - total flux cleaned = 0.000717005 Jy ! Component: 150 - total flux cleaned = 0.000807409 Jy ! Component: 200 - total flux cleaned = 0.000808354 Jy ! Total flux subtracted in 200 components = 0.000808354 Jy ! Clean residual min=-0.001828 max=0.001784 Jy/beam ! Clean residual mean=-0.000002 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.215296 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 129 components and 0.215296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088877Jy sigma=0.000931 ! Fit after self-cal, rms=0.088887Jy sigma=0.000931 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000280551 Jy ! Component: 100 - total flux cleaned = 0.000227159 Jy ! Component: 150 - total flux cleaned = 0.000211292 Jy ! Component: 200 - total flux cleaned = 0.000197575 Jy ! Total flux subtracted in 200 components = 0.000197575 Jy ! Clean residual min=-0.001773 max=0.001727 Jy/beam ! Clean residual mean=-0.000002 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.215494 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 142 components and 0.215494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088881Jy sigma=0.000931 ! Fit after self-cal, rms=0.088887Jy sigma=0.000931 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.712 mas, bmaj=7.665 mas, bpa=-7.518 degrees ! Estimated noise=824.622 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.712 x 7.665 at -7.518 degrees (North through East) ! Clean map min=-0.0019685 max=0.16414 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.111 mas, bmaj=6.412 mas, bpa=-5.244 degrees ! Estimated noise=1382.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.128551 Jy ! Component: 100 - total flux cleaned = 0.161912 Jy ! Component: 150 - total flux cleaned = 0.177009 Jy ! Component: 200 - total flux cleaned = 0.185737 Jy ! Total flux subtracted in 200 components = 0.185737 Jy ! Clean residual min=-0.005977 max=0.005580 Jy/beam ! Clean residual mean=0.000001 rms=0.001695 Jy/beam ! Combined flux in latest and established models = 0.185737 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.185737 Jy ! Inverting map and beam ! Estimated beam: bmin=3.712 mas, bmaj=7.665 mas, bpa=-7.518 degrees ! Estimated noise=824.622 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (30, -22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00783591 Jy ! Component: 100 - total flux cleaned = 0.013116 Jy ! Component: 150 - total flux cleaned = 0.0170005 Jy ! Component: 200 - total flux cleaned = 0.0194688 Jy ! Total flux subtracted in 200 components = 0.0194688 Jy ! Clean residual min=-0.002647 max=0.002510 Jy/beam ! Clean residual mean=-0.000003 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.205205 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 84 components and 0.205205 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.854 mas, bmaj=12.53 mas, bpa=0.3981 degrees ! Estimated noise=992.667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0032059 Jy ! Component: 100 - total flux cleaned = 0.00468278 Jy ! Component: 150 - total flux cleaned = 0.00587956 Jy ! Component: 200 - total flux cleaned = 0.00675786 Jy ! Total flux subtracted in 200 components = 0.00675786 Jy ! Clean residual min=-0.002065 max=0.001748 Jy/beam ! Clean residual mean=-0.000003 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.211963 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000497664 Jy ! Component: 100 - total flux cleaned = 0.000639237 Jy ! Component: 150 - total flux cleaned = 0.000670073 Jy ! Component: 200 - total flux cleaned = 0.000697894 Jy ! Total flux subtracted in 200 components = 0.000697894 Jy ! Clean residual min=-0.001844 max=0.001545 Jy/beam ! Clean residual mean=-0.000002 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.212661 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 146 components and 0.212661 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.712 mas, bmaj=7.665 mas, bpa=-7.518 degrees ! Estimated noise=824.622 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320823 Jy ! Component: 100 - total flux cleaned = 0.000568385 Jy ! Component: 150 - total flux cleaned = 0.000655348 Jy ! Component: 200 - total flux cleaned = 0.000771329 Jy ! Total flux subtracted in 200 components = 0.000771329 Jy ! Clean residual min=-0.002036 max=0.002068 Jy/beam ! Clean residual mean=-0.000001 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.213432 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 168 components and 0.213433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088887Jy sigma=0.000931 ! Fit after self-cal, rms=0.088911Jy sigma=0.000931 wmodel J0357-0751_S_2014_01_04_pus_map.mod ! Writing 168 model components to file: J0357-0751_S_2014_01_04_pus_map.mod wobs J0357-0751_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0357-0751_S_2014_01_04_pus_uvs.fits wwins J0357-0751_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J0357-0751_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000368183 Jy ! Component: 100 - total flux cleaned = -0.000370939 Jy ! Component: 150 - total flux cleaned = -0.000194541 Jy ! Component: 200 - total flux cleaned = 2.41219e-06 Jy ! Component: 250 - total flux cleaned = 0.000138107 Jy ! Component: 300 - total flux cleaned = 0.000242524 Jy ! Component: 350 - total flux cleaned = 0.000267738 Jy ! Component: 400 - total flux cleaned = 0.000391218 Jy ! Component: 450 - total flux cleaned = 0.000439624 Jy ! Component: 500 - total flux cleaned = 0.000509949 Jy ! Component: 550 - total flux cleaned = 0.000487556 Jy ! Component: 600 - total flux cleaned = 0.000510564 Jy ! Component: 650 - total flux cleaned = 0.000510366 Jy ! Component: 700 - total flux cleaned = 0.000510128 Jy ! Component: 750 - total flux cleaned = 0.0005097 Jy ! Component: 800 - total flux cleaned = 0.00053051 Jy ! Component: 850 - total flux cleaned = 0.000509767 Jy ! Component: 900 - total flux cleaned = 0.000509725 Jy ! Component: 950 - total flux cleaned = 0.000509665 Jy ! Component: 1000 - total flux cleaned = 0.000509667 Jy ! Component: 1050 - total flux cleaned = 0.000529135 Jy ! Component: 1100 - total flux cleaned = 0.000567308 Jy ! Component: 1150 - total flux cleaned = 0.000548149 Jy ! Component: 1200 - total flux cleaned = 0.000529283 Jy ! Component: 1250 - total flux cleaned = 0.000584698 Jy ! Component: 1300 - total flux cleaned = 0.000602862 Jy ! Component: 1350 - total flux cleaned = 0.000638753 Jy ! Component: 1400 - total flux cleaned = 0.000621178 Jy ! Component: 1450 - total flux cleaned = 0.000638856 Jy ! Component: 1500 - total flux cleaned = 0.000690971 Jy ! Component: 1550 - total flux cleaned = 0.000673764 Jy ! Component: 1600 - total flux cleaned = 0.000708052 Jy ! Component: 1650 - total flux cleaned = 0.000741801 Jy ! Component: 1700 - total flux cleaned = 0.000774997 Jy ! Component: 1750 - total flux cleaned = 0.000775036 Jy ! Component: 1800 - total flux cleaned = 0.000823985 Jy ! Component: 1850 - total flux cleaned = 0.000856165 Jy ! Component: 1900 - total flux cleaned = 0.00091997 Jy ! Component: 1950 - total flux cleaned = 0.000983083 Jy ! Component: 2000 - total flux cleaned = 0.000998644 Jy ! Component: 2050 - total flux cleaned = 0.00107641 Jy ! Component: 2100 - total flux cleaned = 0.00107646 Jy ! Component: 2150 - total flux cleaned = 0.00113785 Jy ! Component: 2200 - total flux cleaned = 0.00121377 Jy ! Component: 2250 - total flux cleaned = 0.00128893 Jy ! Component: 2300 - total flux cleaned = 0.00131878 Jy ! Component: 2350 - total flux cleaned = 0.00140775 Jy ! Component: 2400 - total flux cleaned = 0.00149594 Jy ! Component: 2450 - total flux cleaned = 0.00156889 Jy ! Component: 2500 - total flux cleaned = 0.00164136 Jy ! Component: 2550 - total flux cleaned = 0.00172772 Jy ! Component: 2600 - total flux cleaned = 0.00181349 Jy ! Component: 2650 - total flux cleaned = 0.00188449 Jy ! Component: 2700 - total flux cleaned = 0.00196914 Jy ! Component: 2750 - total flux cleaned = 0.00202519 Jy ! Component: 2800 - total flux cleaned = 0.00208097 Jy ! Component: 2850 - total flux cleaned = 0.00215023 Jy ! Component: 2900 - total flux cleaned = 0.00224668 Jy ! Component: 2950 - total flux cleaned = 0.00231515 Jy ! Component: 3000 - total flux cleaned = 0.00238336 Jy ! Component: 3050 - total flux cleaned = 0.00246472 Jy ! Component: 3100 - total flux cleaned = 0.00253212 Jy ! Component: 3150 - total flux cleaned = 0.00258582 Jy ! Component: 3200 - total flux cleaned = 0.00265257 Jy ! Component: 3250 - total flux cleaned = 0.00270567 Jy ! Component: 3300 - total flux cleaned = 0.00275866 Jy ! Component: 3350 - total flux cleaned = 0.00278501 Jy ! Component: 3400 - total flux cleaned = 0.00286375 Jy ! Component: 3450 - total flux cleaned = 0.0028767 Jy ! Component: 3500 - total flux cleaned = 0.00291569 Jy ! Component: 3550 - total flux cleaned = 0.00291568 Jy ! Component: 3600 - total flux cleaned = 0.00295454 Jy ! Component: 3650 - total flux cleaned = 0.00295457 Jy ! Component: 3700 - total flux cleaned = 0.00298033 Jy ! Component: 3750 - total flux cleaned = 0.00301881 Jy ! Component: 3800 - total flux cleaned = 0.00306998 Jy ! Component: 3850 - total flux cleaned = 0.00306993 Jy ! Component: 3900 - total flux cleaned = 0.00312089 Jy ! Component: 3950 - total flux cleaned = 0.00309548 Jy ! Component: 4000 - total flux cleaned = 0.00313363 Jy ! Component: 4050 - total flux cleaned = 0.00314633 Jy ! Total flux subtracted in 4096 components = 0.00318433 Jy ! Clean residual min=-0.000793 max=0.000690 Jy/beam ! Clean residual mean=-0.000007 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.216617 Jy keep ! Adding 193 model components to the UV plane model. ! The established model now contains 360 components and 0.216617 Jy ![Exited script file: muppet] wmap "J0357-0751_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.712 x 7.665 at -7.518 degrees (North through East) ! Clean map min=-0.0017114 max=0.16748 Jy/beam ! Writing clean map to FITS file: J0357-0751_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.16748 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000203928 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.365288 0.365288 0.730576 1.46115 2.9223 5.8446 11.6892 23.3784 46.7568 93.5137 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.167 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.712 x 7.665 at -7.518 degrees (North through East) ! Clean map min=-0.0017114 max=0.16748 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0357-0751_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:16:09 2017