! Started logfile: J0350+0506_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:04:33 2017 obs J0350+0506_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0350+0506_S_2015_01_23_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.979982 visibilities/baseline/integration-bin. ! Found source: J0350+0506 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 21344 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0350+0506_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.895319Jy sigma=0.009952 ! Fit after self-cal, rms=0.862592Jy sigma=0.009557 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=6.359 mas, bpa=-1.483 degrees ! Estimated noise=776.442 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100776 Jy ! Component: 100 - total flux cleaned = 0.152153 Jy ! Total flux subtracted in 100 components = 0.152153 Jy ! Clean residual min=-0.019386 max=0.046375 Jy/beam ! Clean residual mean=0.000122 rms=0.006202 Jy/beam ! Combined flux in latest and established models = 0.152153 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.152153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171538Jy sigma=0.001732 ! Fit after self-cal, rms=0.170983Jy sigma=0.001725 ! Inverting map ! Added new window around map position (-5.5, 2.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0450373 Jy ! Component: 100 - total flux cleaned = 0.0761153 Jy ! Total flux subtracted in 100 components = 0.0761153 Jy ! Clean residual min=-0.014981 max=0.039565 Jy/beam ! Clean residual mean=0.000091 rms=0.004870 Jy/beam ! Combined flux in latest and established models = 0.228268 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 44 components and 0.228268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149624Jy sigma=0.001447 ! Fit after self-cal, rms=0.147168Jy sigma=0.001410 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0370656 Jy ! Component: 100 - total flux cleaned = 0.0593964 Jy ! Total flux subtracted in 100 components = 0.0593964 Jy ! Clean residual min=-0.012285 max=0.025094 Jy/beam ! Clean residual mean=0.000068 rms=0.003752 Jy/beam ! Combined flux in latest and established models = 0.287664 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 54 components and 0.287664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133352Jy sigma=0.001212 ! Fit after self-cal, rms=0.131195Jy sigma=0.001176 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0264699 Jy ! Component: 100 - total flux cleaned = 0.0414303 Jy ! Total flux subtracted in 100 components = 0.0414303 Jy ! Clean residual min=-0.010377 max=0.017755 Jy/beam ! Clean residual mean=0.000052 rms=0.002959 Jy/beam ! Combined flux in latest and established models = 0.329095 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 61 components and 0.329095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124382Jy sigma=0.001065 ! Fit after self-cal, rms=0.123576Jy sigma=0.001051 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.328 mas, bmaj=7.268 mas, bpa=-3.016 degrees ! Estimated noise=471.776 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0217098 Jy ! Component: 100 - total flux cleaned = 0.0344682 Jy ! Component: 150 - total flux cleaned = 0.0430446 Jy ! Component: 200 - total flux cleaned = 0.0491637 Jy ! Total flux subtracted in 200 components = 0.0491637 Jy ! Clean residual min=-0.010464 max=0.016649 Jy/beam ! Clean residual mean=0.000061 rms=0.003462 Jy/beam ! Combined flux in latest and established models = 0.378258 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 81 components and 0.378259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120548Jy sigma=0.000988 ! Fit after self-cal, rms=0.120209Jy sigma=0.000981 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.20 HN 0.96 KP 1.01 ! LA 1.07 MK 1.06 NL 1.03 OV 1.01 ! PT 0.92 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.54 HN 1.08 KP 0.94 ! LA 1.02 MK 1.07 NL 1.32 OV 1.05 ! PT 0.91 SC 1.21 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.41 HN 1.06 KP 0.80 ! LA 0.84 MK 1.08 NL 1.48 OV 0.98 ! PT 0.90 SC 1.10 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.26 HN 0.99 KP 0.76 ! LA 0.90 MK 1.11 NL 0.99 OV 1.05 ! PT 0.94 SC 1.07 ! ! ! Fit before self-cal, rms=0.120209Jy sigma=0.000981 ! Fit after self-cal, rms=0.141635Jy sigma=0.000879 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.409 mas, bmaj=7.448 mas, bpa=-3.14 degrees ! Estimated noise=489.757 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000807379 Jy ! Component: 100 - total flux cleaned = -0.000813777 Jy ! Component: 150 - total flux cleaned = -0.000648967 Jy ! Component: 200 - total flux cleaned = -0.000520523 Jy ! Total flux subtracted in 200 components = -0.000520523 Jy ! Clean residual min=-0.007758 max=0.010246 Jy/beam ! Clean residual mean=0.000027 rms=0.002453 Jy/beam ! Combined flux in latest and established models = 0.377738 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 87 components and 0.377738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141119Jy sigma=0.000872 ! Fit after self-cal, rms=0.141389Jy sigma=0.000870 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141389Jy sigma=0.000870 ! Fit after self-cal, rms=0.155150Jy sigma=0.000822 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.44 mas, bmaj=7.409 mas, bpa=-2.623 degrees ! Estimated noise=491.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.94038e-05 Jy ! Component: 100 - total flux cleaned = 0.000211331 Jy ! Component: 150 - total flux cleaned = 0.000425851 Jy ! Component: 200 - total flux cleaned = 0.000727809 Jy ! Total flux subtracted in 200 components = 0.000727809 Jy ! Clean residual min=-0.004828 max=0.009729 Jy/beam ! Clean residual mean=0.000020 rms=0.001366 Jy/beam ! Combined flux in latest and established models = 0.378466 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 93 components and 0.378466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154900Jy sigma=0.000818 ! Fit after self-cal, rms=0.155034Jy sigma=0.000817 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00452667 Jy ! Component: 100 - total flux cleaned = 0.00541625 Jy ! Component: 150 - total flux cleaned = 0.00610933 Jy ! Component: 200 - total flux cleaned = 0.00694912 Jy ! Total flux subtracted in 200 components = 0.00694912 Jy ! Clean residual min=-0.004717 max=0.006287 Jy/beam ! Clean residual mean=0.000013 rms=0.001144 Jy/beam ! Combined flux in latest and established models = 0.385415 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 100 components and 0.385415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154497Jy sigma=0.000808 ! Fit after self-cal, rms=0.154429Jy sigma=0.000807 ! Inverting map ! Added new window around map position (2, -27.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00590031 Jy ! Component: 100 - total flux cleaned = 0.00910849 Jy ! Component: 150 - total flux cleaned = 0.0108608 Jy ! Component: 200 - total flux cleaned = 0.0123556 Jy ! Total flux subtracted in 200 components = 0.0123556 Jy ! Clean residual min=-0.004220 max=0.004319 Jy/beam ! Clean residual mean=0.000011 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.397771 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 121 components and 0.397771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154213Jy sigma=0.000801 ! Fit after self-cal, rms=0.154168Jy sigma=0.000800 ! Inverting map ! Added new window around map position (-30, -13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00406525 Jy ! Component: 100 - total flux cleaned = 0.00626339 Jy ! Component: 150 - total flux cleaned = 0.00752862 Jy ! Component: 200 - total flux cleaned = 0.00814932 Jy ! Total flux subtracted in 200 components = 0.00814932 Jy ! Clean residual min=-0.003762 max=0.003486 Jy/beam ! Clean residual mean=0.000009 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.40592 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 150 components and 0.40592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153996Jy sigma=0.000798 ! Fit after self-cal, rms=0.153974Jy sigma=0.000797 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153974Jy sigma=0.000797 ! Fit after self-cal, rms=0.152230Jy sigma=0.000796 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.431 mas, bmaj=7.384 mas, bpa=-2.591 degrees ! Estimated noise=485.234 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157912 Jy ! Component: 100 - total flux cleaned = 0.00235955 Jy ! Component: 150 - total flux cleaned = 0.00281888 Jy ! Component: 200 - total flux cleaned = 0.00358505 Jy ! Total flux subtracted in 200 components = 0.00358505 Jy ! Clean residual min=-0.002654 max=0.002908 Jy/beam ! Clean residual mean=0.000011 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.409505 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 166 components and 0.409505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152125Jy sigma=0.000794 ! Fit after self-cal, rms=0.152121Jy sigma=0.000794 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14.5, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263605 Jy ! Component: 100 - total flux cleaned = 0.00397008 Jy ! Component: 150 - total flux cleaned = 0.00478352 Jy ! Component: 200 - total flux cleaned = 0.00530497 Jy ! Total flux subtracted in 200 components = 0.00530497 Jy ! Clean residual min=-0.002474 max=0.002556 Jy/beam ! Clean residual mean=0.000008 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.41481 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 184 components and 0.41481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152034Jy sigma=0.000793 ! Fit after self-cal, rms=0.152033Jy sigma=0.000793 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152033Jy sigma=0.000793 ! Fit after self-cal, rms=0.151021Jy sigma=0.000793 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.182 mas, bmaj=11.33 mas, bpa=-6.82 degrees ! Estimated noise=600.856 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203667 Jy ! Component: 100 - total flux cleaned = 0.00301006 Jy ! Component: 150 - total flux cleaned = 0.00367348 Jy ! Component: 200 - total flux cleaned = 0.00424784 Jy ! Total flux subtracted in 200 components = 0.00424784 Jy ! Clean residual min=-0.002869 max=0.003566 Jy/beam ! Clean residual mean=0.000015 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.419058 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 212 components and 0.419058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150981Jy sigma=0.000792 ! Fit after self-cal, rms=0.150977Jy sigma=0.000792 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (46, -123.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00309315 Jy ! Component: 100 - total flux cleaned = 0.00415528 Jy ! Component: 150 - total flux cleaned = 0.00523712 Jy ! Component: 200 - total flux cleaned = 0.00617843 Jy ! Total flux subtracted in 200 components = 0.00617843 Jy ! Clean residual min=-0.002218 max=0.002308 Jy/beam ! Clean residual mean=0.000014 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.425236 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 263 components and 0.425236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150924Jy sigma=0.000791 ! Fit after self-cal, rms=0.150917Jy sigma=0.000791 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=7.369 mas, bpa=-2.593 degrees ! Estimated noise=482.548 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.423 x 7.369 at -2.593 degrees (North through East) ! Clean map min=-0.0019101 max=0.11905 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.845 mas, bmaj=6.406 mas, bpa=-0.8795 degrees ! Estimated noise=803.058 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106037 Jy ! Component: 100 - total flux cleaned = 0.175118 Jy ! Component: 150 - total flux cleaned = 0.224294 Jy ! Component: 200 - total flux cleaned = 0.260249 Jy ! Total flux subtracted in 200 components = 0.260249 Jy ! Clean residual min=-0.009383 max=0.020495 Jy/beam ! Clean residual mean=0.000069 rms=0.003268 Jy/beam ! Combined flux in latest and established models = 0.260249 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.260249 Jy ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=7.369 mas, bpa=-2.593 degrees ! Estimated noise=482.548 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0414278 Jy ! Component: 100 - total flux cleaned = 0.0678182 Jy ! Component: 150 - total flux cleaned = 0.085466 Jy ! Component: 200 - total flux cleaned = 0.0975549 Jy ! Total flux subtracted in 200 components = 0.0975549 Jy ! Clean residual min=-0.005061 max=0.006672 Jy/beam ! Clean residual mean=0.000047 rms=0.001530 Jy/beam ! Combined flux in latest and established models = 0.357803 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 88 components and 0.357803 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00845831 Jy ! Component: 100 - total flux cleaned = 0.0148163 Jy ! Component: 150 - total flux cleaned = 0.0199558 Jy ! Component: 200 - total flux cleaned = 0.0242636 Jy ! Total flux subtracted in 200 components = 0.0242636 Jy ! Clean residual min=-0.003491 max=0.003676 Jy/beam ! Clean residual mean=0.000027 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.382067 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 138 components and 0.382067 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.182 mas, bmaj=11.33 mas, bpa=-6.82 degrees ! Estimated noise=600.856 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00621392 Jy ! Component: 100 - total flux cleaned = 0.0106162 Jy ! Component: 150 - total flux cleaned = 0.0145334 Jy ! Component: 200 - total flux cleaned = 0.0179215 Jy ! Total flux subtracted in 200 components = 0.0179215 Jy ! Clean residual min=-0.003466 max=0.004030 Jy/beam ! Clean residual mean=0.000036 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 0.399988 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295478 Jy ! Component: 100 - total flux cleaned = 0.00565632 Jy ! Component: 150 - total flux cleaned = 0.00774736 Jy ! Component: 200 - total flux cleaned = 0.00962551 Jy ! Total flux subtracted in 200 components = 0.00962551 Jy ! Clean residual min=-0.002703 max=0.003149 Jy/beam ! Clean residual mean=0.000027 rms=0.000858 Jy/beam ! Combined flux in latest and established models = 0.409614 Jy ! Adding 136 model components to the UV plane model. ! The established model now contains 259 components and 0.409614 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=7.369 mas, bpa=-2.593 degrees ! Estimated noise=482.548 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178646 Jy ! Component: 100 - total flux cleaned = 0.00299656 Jy ! Component: 150 - total flux cleaned = 0.00409582 Jy ! Component: 200 - total flux cleaned = 0.00517368 Jy ! Total flux subtracted in 200 components = 0.00517368 Jy ! Clean residual min=-0.001878 max=0.002278 Jy/beam ! Clean residual mean=0.000011 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.414788 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 294 components and 0.414788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150863Jy sigma=0.000791 ! Fit after self-cal, rms=0.150854Jy sigma=0.000790 wmodel J0350+0506_S_2015_01_23_pus_map.mod ! Writing 294 model components to file: J0350+0506_S_2015_01_23_pus_map.mod wobs J0350+0506_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0350+0506_S_2015_01_23_pus_uvs.fits wwins J0350+0506_S_2015_01_23_pus_map.win ! wwins: Wrote 7 windows to J0350+0506_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00086264 Jy ! Component: 100 - total flux cleaned = 0.00120089 Jy ! Component: 150 - total flux cleaned = 0.00142426 Jy ! Component: 200 - total flux cleaned = 0.00178894 Jy ! Component: 250 - total flux cleaned = 0.00202278 Jy ! Component: 300 - total flux cleaned = 0.00233453 Jy ! Component: 350 - total flux cleaned = 0.00260983 Jy ! Component: 400 - total flux cleaned = 0.00285167 Jy ! Component: 450 - total flux cleaned = 0.0030874 Jy ! Component: 500 - total flux cleaned = 0.00329206 Jy ! Component: 550 - total flux cleaned = 0.00346705 Jy ! Component: 600 - total flux cleaned = 0.00358931 Jy ! Component: 650 - total flux cleaned = 0.0037571 Jy ! Component: 700 - total flux cleaned = 0.00387493 Jy ! Component: 750 - total flux cleaned = 0.00408203 Jy ! Component: 800 - total flux cleaned = 0.00419437 Jy ! Component: 850 - total flux cleaned = 0.00428295 Jy ! Component: 900 - total flux cleaned = 0.00441359 Jy ! Component: 950 - total flux cleaned = 0.00452055 Jy ! Component: 1000 - total flux cleaned = 0.00456243 Jy ! Component: 1050 - total flux cleaned = 0.00462473 Jy ! Component: 1100 - total flux cleaned = 0.00470605 Jy ! Component: 1150 - total flux cleaned = 0.00474629 Jy ! Component: 1200 - total flux cleaned = 0.00478602 Jy ! Component: 1250 - total flux cleaned = 0.00480563 Jy ! Component: 1300 - total flux cleaned = 0.00488226 Jy ! Component: 1350 - total flux cleaned = 0.00486317 Jy ! Component: 1400 - total flux cleaned = 0.00493796 Jy ! Component: 1450 - total flux cleaned = 0.00493757 Jy ! Component: 1500 - total flux cleaned = 0.0049196 Jy ! Component: 1550 - total flux cleaned = 0.00495564 Jy ! Component: 1600 - total flux cleaned = 0.00504408 Jy ! Component: 1650 - total flux cleaned = 0.00506154 Jy ! Component: 1700 - total flux cleaned = 0.00514794 Jy ! Component: 1750 - total flux cleaned = 0.00514797 Jy ! Component: 1800 - total flux cleaned = 0.00530078 Jy ! Component: 1850 - total flux cleaned = 0.0053345 Jy ! Component: 1900 - total flux cleaned = 0.00546723 Jy ! Component: 1950 - total flux cleaned = 0.0055494 Jy ! Component: 2000 - total flux cleaned = 0.00566297 Jy ! Component: 2050 - total flux cleaned = 0.00569499 Jy ! Component: 2100 - total flux cleaned = 0.00579077 Jy ! Component: 2150 - total flux cleaned = 0.00590136 Jy ! Component: 2200 - total flux cleaned = 0.00601076 Jy ! Component: 2250 - total flux cleaned = 0.00608834 Jy ! Component: 2300 - total flux cleaned = 0.0061805 Jy ! Component: 2350 - total flux cleaned = 0.00633234 Jy ! Component: 2400 - total flux cleaned = 0.00642245 Jy ! Component: 2450 - total flux cleaned = 0.00654169 Jy ! Component: 2500 - total flux cleaned = 0.0066744 Jy ! Component: 2550 - total flux cleaned = 0.00676227 Jy ! Component: 2600 - total flux cleaned = 0.0068349 Jy ! Component: 2650 - total flux cleaned = 0.00690656 Jy ! Component: 2700 - total flux cleaned = 0.00694955 Jy ! Component: 2750 - total flux cleaned = 0.00703451 Jy ! Component: 2800 - total flux cleaned = 0.00711855 Jy ! Component: 2850 - total flux cleaned = 0.00720196 Jy ! Component: 2900 - total flux cleaned = 0.00729836 Jy ! Component: 2950 - total flux cleaned = 0.00735293 Jy ! Component: 3000 - total flux cleaned = 0.00742063 Jy ! Component: 3050 - total flux cleaned = 0.00747455 Jy ! Component: 3100 - total flux cleaned = 0.00756798 Jy ! Component: 3150 - total flux cleaned = 0.00766054 Jy ! Component: 3200 - total flux cleaned = 0.00772612 Jy ! Component: 3250 - total flux cleaned = 0.00781734 Jy ! Component: 3300 - total flux cleaned = 0.00789487 Jy ! Component: 3350 - total flux cleaned = 0.00793325 Jy ! Component: 3400 - total flux cleaned = 0.00797146 Jy ! Component: 3450 - total flux cleaned = 0.00800934 Jy ! Component: 3500 - total flux cleaned = 0.00810964 Jy ! Component: 3550 - total flux cleaned = 0.00809708 Jy ! Component: 3600 - total flux cleaned = 0.0081094 Jy ! Component: 3650 - total flux cleaned = 0.00818299 Jy ! Component: 3700 - total flux cleaned = 0.00821943 Jy ! Component: 3750 - total flux cleaned = 0.00824367 Jy ! Component: 3800 - total flux cleaned = 0.00825566 Jy ! Component: 3850 - total flux cleaned = 0.00836291 Jy ! Component: 3900 - total flux cleaned = 0.00835115 Jy ! Component: 3950 - total flux cleaned = 0.00843346 Jy ! Component: 4000 - total flux cleaned = 0.00844518 Jy ! Component: 4050 - total flux cleaned = 0.00848008 Jy ! Total flux subtracted in 4096 components = 0.00853764 Jy ! Clean residual min=-0.000762 max=0.000675 Jy/beam ! Clean residual mean=0.000006 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.423325 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 591 components and 0.423325 Jy ![Exited script file: muppet] wmap "J0350+0506_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.423 x 7.369 at -2.593 degrees (North through East) ! Clean map min=-0.0010842 max=0.1196 Jy/beam ! Writing clean map to FITS file: J0350+0506_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.119597 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000212858 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.533941 0.533941 1.06788 2.13576 4.27153 8.54306 17.0861 34.1722 68.3444 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.119 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.423 x 7.369 at -2.593 degrees (North through East) ! Clean map min=-0.0010842 max=0.1196 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0350+0506_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:04:40 2017