! Started logfile: J0339-0133_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:15:51 2017 obs J0339-0133_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0339-0133_S_2014_01_04_pus_uva.fits ! AN table 1: 118 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J0339-0133 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 8496 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0339-0133_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.734033Jy sigma=0.009228 ! Fit after self-cal, rms=0.691766Jy sigma=0.008731 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.252 mas, bmaj=6.165 mas, bpa=-5.274 degrees ! Estimated noise=889.363 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.239572 Jy ! Component: 100 - total flux cleaned = 0.321902 Jy ! Total flux subtracted in 100 components = 0.321902 Jy ! Clean residual min=-0.026168 max=0.036327 Jy/beam ! Clean residual mean=-0.000230 rms=0.008123 Jy/beam ! Combined flux in latest and established models = 0.321902 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.321902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123353Jy sigma=0.001488 ! Fit after self-cal, rms=0.123410Jy sigma=0.001487 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.72 mas, bmaj=7.13 mas, bpa=-5.77 degrees ! Estimated noise=617.798 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0524967 Jy ! Component: 100 - total flux cleaned = 0.0756053 Jy ! Component: 150 - total flux cleaned = 0.0883716 Jy ! Component: 200 - total flux cleaned = 0.09639 Jy ! Total flux subtracted in 200 components = 0.09639 Jy ! Clean residual min=-0.016425 max=0.028819 Jy/beam ! Clean residual mean=-0.000348 rms=0.005108 Jy/beam ! Combined flux in latest and established models = 0.418292 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 29 components and 0.418292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099663Jy sigma=0.001217 ! Fit after self-cal, rms=0.099641Jy sigma=0.001216 ! Inverting map ! Added new window around map position (-11, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0259066 Jy ! Component: 100 - total flux cleaned = 0.0344481 Jy ! Component: 150 - total flux cleaned = 0.0374783 Jy ! Component: 200 - total flux cleaned = 0.0409039 Jy ! Total flux subtracted in 200 components = 0.0409039 Jy ! Clean residual min=-0.012425 max=0.013303 Jy/beam ! Clean residual mean=-0.000220 rms=0.003266 Jy/beam ! Combined flux in latest and established models = 0.459196 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 74 components and 0.459196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093327Jy sigma=0.001123 ! Fit after self-cal, rms=0.092420Jy sigma=0.001110 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* KP 1.00* LA 1.00 ! MK 0.96 NL 1.01 OV 0.99 PT 1.02 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* KP 1.00* LA 0.97 ! MK 1.00 NL 1.07 OV 1.04 PT 0.98 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.00* KP 1.00* LA 0.80 ! MK 1.03 NL 1.05 OV 0.98 PT 0.96 ! SC 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.00* KP 1.00* LA 0.91 ! MK 0.99 NL 1.15 OV 1.06 PT 0.99 ! SC 0.92 ! ! ! Fit before self-cal, rms=0.092420Jy sigma=0.001110 ! Fit after self-cal, rms=0.078991Jy sigma=0.000966 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.693 mas, bmaj=7.094 mas, bpa=-4.921 degrees ! Estimated noise=613.291 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00619511 Jy ! Component: 100 - total flux cleaned = 0.00592883 Jy ! Component: 150 - total flux cleaned = 0.00514689 Jy ! Component: 200 - total flux cleaned = 0.00458647 Jy ! Total flux subtracted in 200 components = 0.00458647 Jy ! Clean residual min=-0.005301 max=0.006721 Jy/beam ! Clean residual mean=-0.000060 rms=0.001617 Jy/beam ! Combined flux in latest and established models = 0.463783 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 91 components and 0.463783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078414Jy sigma=0.000957 ! Fit after self-cal, rms=0.078241Jy sigma=0.000955 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078241Jy sigma=0.000955 ! Fit after self-cal, rms=0.077576Jy sigma=0.000931 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.701 mas, bmaj=7.087 mas, bpa=-4.955 degrees ! Estimated noise=613.929 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126561 Jy ! Component: 100 - total flux cleaned = 0.00136391 Jy ! Component: 150 - total flux cleaned = 0.00121359 Jy ! Component: 200 - total flux cleaned = 0.000948617 Jy ! Total flux subtracted in 200 components = 0.000948617 Jy ! Clean residual min=-0.003493 max=0.005311 Jy/beam ! Clean residual mean=-0.000034 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.464731 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 106 components and 0.464732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077369Jy sigma=0.000929 ! Fit after self-cal, rms=0.077357Jy sigma=0.000928 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-22.5, -11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0045619 Jy ! Component: 100 - total flux cleaned = 0.00701115 Jy ! Component: 150 - total flux cleaned = 0.00836893 Jy ! Component: 200 - total flux cleaned = 0.00891088 Jy ! Total flux subtracted in 200 components = 0.00891088 Jy ! Clean residual min=-0.002928 max=0.002998 Jy/beam ! Clean residual mean=-0.000003 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.473642 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 137 components and 0.473642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077036Jy sigma=0.000925 ! Fit after self-cal, rms=0.077027Jy sigma=0.000925 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077027Jy sigma=0.000925 ! Fit after self-cal, rms=0.076794Jy sigma=0.000924 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.697 mas, bmaj=7.082 mas, bpa=-4.868 degrees ! Estimated noise=612.852 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150279 Jy ! Component: 100 - total flux cleaned = 0.00199757 Jy ! Component: 150 - total flux cleaned = 0.00228074 Jy ! Component: 200 - total flux cleaned = 0.00236348 Jy ! Total flux subtracted in 200 components = 0.00236348 Jy ! Clean residual min=-0.002512 max=0.002594 Jy/beam ! Clean residual mean=0.000008 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.476006 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 158 components and 0.476006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076720Jy sigma=0.000923 ! Fit after self-cal, rms=0.076707Jy sigma=0.000923 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (20.5, 95.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226935 Jy ! Component: 100 - total flux cleaned = 0.00280689 Jy ! Component: 150 - total flux cleaned = 0.00317279 Jy ! Component: 200 - total flux cleaned = 0.00350205 Jy ! Total flux subtracted in 200 components = 0.00350205 Jy ! Clean residual min=-0.002052 max=0.001846 Jy/beam ! Clean residual mean=0.000001 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.479508 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 187 components and 0.479508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076605Jy sigma=0.000922 ! Fit after self-cal, rms=0.076599Jy sigma=0.000922 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076599Jy sigma=0.000922 ! Fit after self-cal, rms=0.076546Jy sigma=0.000922 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.972 mas, bmaj=11.68 mas, bpa=0.1024 degrees ! Estimated noise=738.937 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000767582 Jy ! Component: 100 - total flux cleaned = 0.00115744 Jy ! Component: 150 - total flux cleaned = 0.00142165 Jy ! Component: 200 - total flux cleaned = 0.00157396 Jy ! Total flux subtracted in 200 components = 0.00157396 Jy ! Clean residual min=-0.001755 max=0.001820 Jy/beam ! Clean residual mean=-0.000005 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.481082 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 214 components and 0.481082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076529Jy sigma=0.000922 ! Fit after self-cal, rms=0.076526Jy sigma=0.000922 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000224693 Jy ! Component: 100 - total flux cleaned = 0.000410552 Jy ! Component: 150 - total flux cleaned = 0.000574837 Jy ! Component: 200 - total flux cleaned = 0.000674817 Jy ! Total flux subtracted in 200 components = 0.000674817 Jy ! Clean residual min=-0.001615 max=0.001758 Jy/beam ! Clean residual mean=-0.000006 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.481757 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 232 components and 0.481757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076522Jy sigma=0.000922 ! Fit after self-cal, rms=0.076524Jy sigma=0.000922 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.696 mas, bmaj=7.083 mas, bpa=-4.867 degrees ! Estimated noise=612.527 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.696 x 7.083 at -4.867 degrees (North through East) ! Clean map min=-0.0078405 max=0.31662 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=6.1 mas, bpa=-4.07 degrees ! Estimated noise=888.137 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.239337 Jy ! Component: 100 - total flux cleaned = 0.324121 Jy ! Component: 150 - total flux cleaned = 0.367329 Jy ! Component: 200 - total flux cleaned = 0.393945 Jy ! Total flux subtracted in 200 components = 0.393945 Jy ! Clean residual min=-0.012814 max=0.014479 Jy/beam ! Clean residual mean=-0.000098 rms=0.003752 Jy/beam ! Combined flux in latest and established models = 0.393945 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.393945 Jy ! Inverting map and beam ! Estimated beam: bmin=3.696 mas, bmaj=7.083 mas, bpa=-4.867 degrees ! Estimated noise=612.527 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0233202 Jy ! Component: 100 - total flux cleaned = 0.0381726 Jy ! Component: 150 - total flux cleaned = 0.0469487 Jy ! Component: 200 - total flux cleaned = 0.0524306 Jy ! Total flux subtracted in 200 components = 0.0524306 Jy ! Clean residual min=-0.005483 max=0.006027 Jy/beam ! Clean residual mean=-0.000091 rms=0.001567 Jy/beam ! Combined flux in latest and established models = 0.446376 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 55 components and 0.446376 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.972 mas, bmaj=11.68 mas, bpa=0.1024 degrees ! Estimated noise=738.937 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00942876 Jy ! Component: 100 - total flux cleaned = 0.0137686 Jy ! Component: 150 - total flux cleaned = 0.016781 Jy ! Component: 200 - total flux cleaned = 0.0194141 Jy ! Total flux subtracted in 200 components = 0.0194141 Jy ! Clean residual min=-0.003988 max=0.003656 Jy/beam ! Clean residual mean=-0.000054 rms=0.001090 Jy/beam ! Combined flux in latest and established models = 0.46579 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229902 Jy ! Component: 100 - total flux cleaned = 0.00412332 Jy ! Component: 150 - total flux cleaned = 0.00559209 Jy ! Component: 200 - total flux cleaned = 0.00694829 Jy ! Total flux subtracted in 200 components = 0.00694829 Jy ! Clean residual min=-0.002846 max=0.002248 Jy/beam ! Clean residual mean=-0.000026 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.472738 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 129 components and 0.472738 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.696 mas, bmaj=7.083 mas, bpa=-4.867 degrees ! Estimated noise=612.527 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149958 Jy ! Component: 100 - total flux cleaned = 0.00280268 Jy ! Component: 150 - total flux cleaned = 0.00399021 Jy ! Component: 200 - total flux cleaned = 0.00467383 Jy ! Total flux subtracted in 200 components = 0.00467383 Jy ! Clean residual min=-0.002115 max=0.001997 Jy/beam ! Clean residual mean=-0.000002 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.477412 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 154 components and 0.477412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076581Jy sigma=0.000923 ! Fit after self-cal, rms=0.076575Jy sigma=0.000923 wmodel J0339-0133_S_2014_01_04_pus_map.mod ! Writing 154 model components to file: J0339-0133_S_2014_01_04_pus_map.mod wobs J0339-0133_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0339-0133_S_2014_01_04_pus_uvs.fits wwins J0339-0133_S_2014_01_04_pus_map.win ! wwins: Wrote 5 windows to J0339-0133_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000162833 Jy ! Component: 100 - total flux cleaned = 0.000114356 Jy ! Component: 150 - total flux cleaned = 0.000114298 Jy ! Component: 200 - total flux cleaned = 5.32867e-05 Jy ! Component: 250 - total flux cleaned = 2.38915e-05 Jy ! Component: 300 - total flux cleaned = -6.05627e-05 Jy ! Component: 350 - total flux cleaned = -3.34697e-05 Jy ! Component: 400 - total flux cleaned = -3.31544e-05 Jy ! Component: 450 - total flux cleaned = -3.28954e-05 Jy ! Component: 500 - total flux cleaned = -5.72828e-05 Jy ! Component: 550 - total flux cleaned = -0.000104844 Jy ! Component: 600 - total flux cleaned = -0.000172941 Jy ! Component: 650 - total flux cleaned = -0.000172525 Jy ! Component: 700 - total flux cleaned = -0.000172541 Jy ! Component: 750 - total flux cleaned = -0.000193367 Jy ! Component: 800 - total flux cleaned = -0.000112741 Jy ! Component: 850 - total flux cleaned = -0.000132311 Jy ! Component: 900 - total flux cleaned = -9.36551e-05 Jy ! Component: 950 - total flux cleaned = -3.77033e-05 Jy ! Component: 1000 - total flux cleaned = -1.43571e-06 Jy ! Component: 1050 - total flux cleaned = -1.41158e-06 Jy ! Component: 1100 - total flux cleaned = 6.83261e-05 Jy ! Component: 1150 - total flux cleaned = 6.84429e-05 Jy ! Component: 1200 - total flux cleaned = 6.86508e-05 Jy ! Component: 1250 - total flux cleaned = 0.000150278 Jy ! Component: 1300 - total flux cleaned = 0.000181629 Jy ! Component: 1350 - total flux cleaned = 0.000166169 Jy ! Component: 1400 - total flux cleaned = 0.000181465 Jy ! Component: 1450 - total flux cleaned = 0.000211387 Jy ! Component: 1500 - total flux cleaned = 0.000196412 Jy ! Component: 1550 - total flux cleaned = 0.000181681 Jy ! Component: 1600 - total flux cleaned = 0.000167456 Jy ! Component: 1650 - total flux cleaned = 0.000167496 Jy ! Component: 1700 - total flux cleaned = 0.000153489 Jy ! Component: 1750 - total flux cleaned = 0.000153246 Jy ! Component: 1800 - total flux cleaned = 0.000166623 Jy ! Component: 1850 - total flux cleaned = 0.000153365 Jy ! Component: 1900 - total flux cleaned = 0.000179306 Jy ! Component: 1950 - total flux cleaned = 0.000166452 Jy ! Component: 2000 - total flux cleaned = 0.000179153 Jy ! Component: 2050 - total flux cleaned = 0.000154191 Jy ! Component: 2100 - total flux cleaned = 0.000129596 Jy ! Component: 2150 - total flux cleaned = 0.000129776 Jy ! Component: 2200 - total flux cleaned = 0.000141788 Jy ! Component: 2250 - total flux cleaned = 0.000141759 Jy ! Component: 2300 - total flux cleaned = 0.000165357 Jy ! Component: 2350 - total flux cleaned = 0.00023468 Jy ! Component: 2400 - total flux cleaned = 0.000257519 Jy ! Component: 2450 - total flux cleaned = 0.000325398 Jy ! Component: 2500 - total flux cleaned = 0.00035893 Jy ! Component: 2550 - total flux cleaned = 0.000403121 Jy ! Component: 2600 - total flux cleaned = 0.000446869 Jy ! Component: 2650 - total flux cleaned = 0.000501026 Jy ! Component: 2700 - total flux cleaned = 0.000511848 Jy ! Component: 2750 - total flux cleaned = 0.000575439 Jy ! Component: 2800 - total flux cleaned = 0.000648757 Jy ! Component: 2850 - total flux cleaned = 0.000679763 Jy ! Component: 2900 - total flux cleaned = 0.000720814 Jy ! Component: 2950 - total flux cleaned = 0.000781674 Jy ! Component: 3000 - total flux cleaned = 0.000821833 Jy ! Component: 3050 - total flux cleaned = 0.000851781 Jy ! Component: 3100 - total flux cleaned = 0.000940358 Jy ! Component: 3150 - total flux cleaned = 0.000998765 Jy ! Component: 3200 - total flux cleaned = 0.00105665 Jy ! Component: 3250 - total flux cleaned = 0.0010949 Jy ! Component: 3300 - total flux cleaned = 0.00117069 Jy ! Component: 3350 - total flux cleaned = 0.00121759 Jy ! Component: 3400 - total flux cleaned = 0.00127345 Jy ! Component: 3450 - total flux cleaned = 0.00130112 Jy ! Component: 3500 - total flux cleaned = 0.00134692 Jy ! Component: 3550 - total flux cleaned = 0.00140146 Jy ! Component: 3600 - total flux cleaned = 0.00143745 Jy ! Component: 3650 - total flux cleaned = 0.00148209 Jy ! Component: 3700 - total flux cleaned = 0.00152639 Jy ! Component: 3750 - total flux cleaned = 0.00155285 Jy ! Component: 3800 - total flux cleaned = 0.00160532 Jy ! Component: 3850 - total flux cleaned = 0.00164865 Jy ! Component: 3900 - total flux cleaned = 0.00169163 Jy ! Component: 3950 - total flux cleaned = 0.0017258 Jy ! Component: 4000 - total flux cleaned = 0.00177671 Jy ! Component: 4050 - total flux cleaned = 0.00182722 Jy ! Total flux subtracted in 4096 components = 0.00187737 Jy ! Clean residual min=-0.000460 max=0.000502 Jy/beam ! Clean residual mean=0.000004 rms=0.000140 Jy/beam ! Combined flux in latest and established models = 0.47929 Jy keep ! Adding 211 model components to the UV plane model. ! The established model now contains 365 components and 0.479289 Jy ![Exited script file: muppet] wmap "J0339-0133_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.696 x 7.083 at -4.867 degrees (North through East) ! Clean map min=-0.0054634 max=0.31955 Jy/beam ! Writing clean map to FITS file: J0339-0133_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.319552 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000140583 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.131981 0.131981 0.263963 0.527925 1.05585 2.1117 4.2234 8.4468 16.8936 33.7872 67.5744 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.319 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.696 x 7.083 at -4.867 degrees (North through East) ! Clean map min=-0.0054634 max=0.31955 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0339-0133_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:15:56 2017