! Started logfile: J0339+6008_X_2015_03_17_pus_uvs.log on Sat Dec 31 18:59:42 2016 obs J0339+6008_X_2015_03_17_pus_uva.fits ! Reading UV FITS file: J0339+6008_X_2015_03_17_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.972174 visibilities/baseline/integration-bin. ! Found source: J0339+6008 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 60372 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0339+6008_X_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.975735Jy sigma=0.011253 ! Fit after self-cal, rms=0.947369Jy sigma=0.010964 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7472 mas, bmaj=1.285 mas, bpa=-76.77 degrees ! Estimated noise=621.908 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0408248 Jy ! Component: 100 - total flux cleaned = 0.0502193 Jy ! Total flux subtracted in 100 components = 0.0502193 Jy ! Clean residual min=-0.002987 max=0.005376 Jy/beam ! Clean residual mean=0.000018 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.0502193 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0502193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072123Jy sigma=0.000782 ! Fit after self-cal, rms=0.071993Jy sigma=0.000781 ! Inverting map ! Added new window around map position (0.6, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00499835 Jy ! Component: 100 - total flux cleaned = 0.00808175 Jy ! Total flux subtracted in 100 components = 0.00808175 Jy ! Clean residual min=-0.002366 max=0.002440 Jy/beam ! Clean residual mean=0.000013 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.058301 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 27 components and 0.058301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071478Jy sigma=0.000775 ! Fit after self-cal, rms=0.071466Jy sigma=0.000774 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9775 mas, bmaj=1.604 mas, bpa=-82.76 degrees ! Estimated noise=252.214 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038554 Jy ! Component: 100 - total flux cleaned = 0.00593936 Jy ! Component: 150 - total flux cleaned = 0.00727307 Jy ! Component: 200 - total flux cleaned = 0.00815424 Jy ! Total flux subtracted in 200 components = 0.00815424 Jy ! Clean residual min=-0.002064 max=0.001547 Jy/beam ! Clean residual mean=0.000012 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.0664553 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 59 components and 0.0664553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071239Jy sigma=0.000772 ! Fit after self-cal, rms=0.071228Jy sigma=0.000772 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.07 HN 1.09 KP 0.93 ! LA 1.02 MK 0.99 NL 1.02 OV 0.97 ! PT 1.05 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.12 HN 1.05 KP 0.86 ! LA 1.03 MK 0.99 NL 0.99 OV 0.96 ! PT 0.98 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.06 HN 1.06 KP 0.85 ! LA 1.05 MK 1.01 NL 1.01 OV 0.99 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.08 HN 1.02 KP 0.78 ! LA 1.05 MK 0.96 NL 1.00 OV 1.03 ! PT 1.02 SC 1.13 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.10 HN 1.00 KP 0.75 ! LA 1.08 MK 0.97 NL 1.03 OV 0.99 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.10 HN 1.07 KP 0.74 ! LA 1.06 MK 0.97 NL 1.02 OV 1.01 ! PT 0.93 SC 1.09 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.10 HN 1.05 KP 0.79 ! LA 1.07 MK 0.96 NL 0.96 OV 1.06 ! PT 1.00 SC 1.08 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.16 HN 1.07 KP 0.77 ! LA 0.99 MK 1.05 NL 1.00 OV 1.02 ! PT 1.02 SC 1.15 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.10 HN 1.10 KP 0.84 ! LA 1.02 MK 0.94 NL 1.05 OV 1.01 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.08 HN 1.05 KP 0.82 ! LA 1.01 MK 1.03 NL 1.00 OV 1.04 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.12 HN 1.04 KP 0.84 ! LA 1.09 MK 0.93 NL 0.98 OV 1.04 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.07 HN 1.02 KP 0.87 ! LA 1.01 MK 0.97 NL 1.01 OV 1.08 ! PT 1.04 SC 1.01 ! ! ! Fit before self-cal, rms=0.071228Jy sigma=0.000772 ! Fit after self-cal, rms=0.070442Jy sigma=0.000768 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9838 mas, bmaj=1.614 mas, bpa=-82.2 degrees ! Estimated noise=251.656 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000637845 Jy ! Component: 100 - total flux cleaned = 0.000753717 Jy ! Component: 150 - total flux cleaned = 0.000816274 Jy ! Component: 200 - total flux cleaned = 0.000855148 Jy ! Total flux subtracted in 200 components = 0.000855148 Jy ! Clean residual min=-0.000739 max=0.000953 Jy/beam ! Clean residual mean=0.000002 rms=0.000201 Jy/beam ! Combined flux in latest and established models = 0.0673104 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 71 components and 0.0673104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070434Jy sigma=0.000768 ! Fit after self-cal, rms=0.070447Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070447Jy sigma=0.000768 ! Fit after self-cal, rms=0.070739Jy sigma=0.000767 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9826 mas, bmaj=1.617 mas, bpa=-82.56 degrees ! Estimated noise=251.965 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000363581 Jy ! Component: 100 - total flux cleaned = 0.00040094 Jy ! Component: 150 - total flux cleaned = 0.000434025 Jy ! Component: 200 - total flux cleaned = 0.0004498 Jy ! Total flux subtracted in 200 components = 0.0004498 Jy ! Clean residual min=-0.000750 max=0.000857 Jy/beam ! Clean residual mean=0.000000 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.0677602 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 77 components and 0.0677603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070736Jy sigma=0.000767 ! Fit after self-cal, rms=0.070753Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14.2, 21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000643208 Jy ! Component: 100 - total flux cleaned = 0.000693565 Jy ! Component: 150 - total flux cleaned = 0.000721175 Jy ! Component: 200 - total flux cleaned = 0.000744182 Jy ! Total flux subtracted in 200 components = 0.000744182 Jy ! Clean residual min=-0.000735 max=0.000737 Jy/beam ! Clean residual mean=-0.000001 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.0685044 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 90 components and 0.0685044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070743Jy sigma=0.000767 ! Fit after self-cal, rms=0.070743Jy sigma=0.000767 ! Inverting map ! Added new window around map position (-11, -16.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000358136 Jy ! Component: 100 - total flux cleaned = 0.000475948 Jy ! Component: 150 - total flux cleaned = 0.000490729 Jy ! Component: 200 - total flux cleaned = 0.000490728 Jy ! Total flux subtracted in 200 components = 0.000490728 Jy ! Clean residual min=-0.000662 max=0.000629 Jy/beam ! Clean residual mean=-0.000001 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.0689952 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 101 components and 0.0689952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070735Jy sigma=0.000767 ! Fit after self-cal, rms=0.070732Jy sigma=0.000767 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070732Jy sigma=0.000767 ! Fit after self-cal, rms=0.070691Jy sigma=0.000767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9813 mas, bmaj=1.617 mas, bpa=-82.62 degrees ! Estimated noise=251.704 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000293573 Jy ! Component: 100 - total flux cleaned = 0.000357526 Jy ! Component: 150 - total flux cleaned = 0.000392281 Jy ! Component: 200 - total flux cleaned = 0.000392365 Jy ! Total flux subtracted in 200 components = 0.000392365 Jy ! Clean residual min=-0.000629 max=0.000618 Jy/beam ! Clean residual mean=-0.000001 rms=0.000159 Jy/beam ! Combined flux in latest and established models = 0.0693875 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 107 components and 0.0693875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070687Jy sigma=0.000767 ! Fit after self-cal, rms=0.070687Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000102391 Jy ! Component: 100 - total flux cleaned = 0.000113408 Jy ! Component: 150 - total flux cleaned = 0.000113286 Jy ! Component: 200 - total flux cleaned = 0.000103814 Jy ! Total flux subtracted in 200 components = 0.000103814 Jy ! Clean residual min=-0.000623 max=0.000602 Jy/beam ! Clean residual mean=-0.000001 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.0694913 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 110 components and 0.0694913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070685Jy sigma=0.000767 ! Fit after self-cal, rms=0.070683Jy sigma=0.000767 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070683Jy sigma=0.000767 ! Fit after self-cal, rms=0.070717Jy sigma=0.000767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.13 mas, bmaj=2.932 mas, bpa=88.92 degrees ! Estimated noise=307.514 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000387028 Jy ! Component: 100 - total flux cleaned = 0.000480696 Jy ! Component: 150 - total flux cleaned = 0.000533113 Jy ! Component: 200 - total flux cleaned = 0.000571253 Jy ! Total flux subtracted in 200 components = 0.000571253 Jy ! Clean residual min=-0.000603 max=0.000569 Jy/beam ! Clean residual mean=-0.000002 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.0700626 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 126 components and 0.0700626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070717Jy sigma=0.000767 ! Fit after self-cal, rms=0.070717Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.2188e-05 Jy ! Component: 100 - total flux cleaned = 9.89e-05 Jy ! Component: 150 - total flux cleaned = 0.000115924 Jy ! Component: 200 - total flux cleaned = 0.000141269 Jy ! Total flux subtracted in 200 components = 0.000141269 Jy ! Clean residual min=-0.000604 max=0.000554 Jy/beam ! Clean residual mean=-0.000002 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.0702038 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 131 components and 0.0702038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070717Jy sigma=0.000767 ! Fit after self-cal, rms=0.070717Jy sigma=0.000767 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.981 mas, bmaj=1.618 mas, bpa=-82.64 degrees ! Estimated noise=251.756 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.981 x 1.618 at -82.64 degrees (North through East) ! Clean map min=-0.00074899 max=0.05272 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7472 mas, bmaj=1.289 mas, bpa=-76.74 degrees ! Estimated noise=625.523 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0408325 Jy ! Component: 100 - total flux cleaned = 0.0511134 Jy ! Component: 150 - total flux cleaned = 0.0564981 Jy ! Component: 200 - total flux cleaned = 0.0599754 Jy ! Total flux subtracted in 200 components = 0.0599754 Jy ! Clean residual min=-0.002023 max=0.001905 Jy/beam ! Clean residual mean=0.000005 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0599753 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0599753 Jy ! Inverting map and beam ! Estimated beam: bmin=0.981 mas, bmaj=1.618 mas, bpa=-82.64 degrees ! Estimated noise=251.756 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00332997 Jy ! Component: 100 - total flux cleaned = 0.00514636 Jy ! Component: 150 - total flux cleaned = 0.00643484 Jy ! Component: 200 - total flux cleaned = 0.0073918 Jy ! Total flux subtracted in 200 components = 0.0073918 Jy ! Clean residual min=-0.000809 max=0.000786 Jy/beam ! Clean residual mean=-0.000001 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.0673671 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 44 components and 0.0673671 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.13 mas, bmaj=2.932 mas, bpa=88.92 degrees ! Estimated noise=307.514 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105504 Jy ! Component: 100 - total flux cleaned = 0.00156807 Jy ! Component: 150 - total flux cleaned = 0.00183438 Jy ! Component: 200 - total flux cleaned = 0.00206163 Jy ! Total flux subtracted in 200 components = 0.00206163 Jy ! Clean residual min=-0.000665 max=0.000626 Jy/beam ! Clean residual mean=-0.000004 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.0694287 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000186015 Jy ! Component: 100 - total flux cleaned = 0.000301007 Jy ! Component: 150 - total flux cleaned = 0.000400486 Jy ! Component: 200 - total flux cleaned = 0.000471731 Jy ! Total flux subtracted in 200 components = 0.000471731 Jy ! Clean residual min=-0.000627 max=0.000595 Jy/beam ! Clean residual mean=-0.000004 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.0699005 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 80 components and 0.0699005 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.981 mas, bmaj=1.618 mas, bpa=-82.64 degrees ! Estimated noise=251.756 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127373 Jy ! Component: 100 - total flux cleaned = -0.000130267 Jy ! Component: 150 - total flux cleaned = -9.74328e-05 Jy ! Component: 200 - total flux cleaned = -9.71298e-05 Jy ! Total flux subtracted in 200 components = -9.71298e-05 Jy ! Clean residual min=-0.000626 max=0.000690 Jy/beam ! Clean residual mean=-0.000001 rms=0.000160 Jy/beam ! Combined flux in latest and established models = 0.0698033 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 93 components and 0.0698033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070723Jy sigma=0.000767 ! Fit after self-cal, rms=0.070718Jy sigma=0.000767 wmodel J0339+6008_X_2015_03_17_pus_map.mod ! Writing 93 model components to file: J0339+6008_X_2015_03_17_pus_map.mod wobs J0339+6008_X_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J0339+6008_X_2015_03_17_pus_uvs.fits wwins J0339+6008_X_2015_03_17_pus_map.win ! wwins: Wrote 4 windows to J0339+6008_X_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.65942e-05 Jy ! Component: 100 - total flux cleaned = 9.70324e-05 Jy ! Component: 150 - total flux cleaned = 0.000107271 Jy ! Component: 200 - total flux cleaned = 8.86396e-05 Jy ! Component: 250 - total flux cleaned = 7.04692e-05 Jy ! Component: 300 - total flux cleaned = 5.2929e-05 Jy ! Component: 350 - total flux cleaned = 4.44452e-05 Jy ! Component: 400 - total flux cleaned = 5.27041e-05 Jy ! Component: 450 - total flux cleaned = 4.43593e-05 Jy ! Component: 500 - total flux cleaned = 4.41727e-05 Jy ! Component: 550 - total flux cleaned = -2.71268e-06 Jy ! Component: 600 - total flux cleaned = -1.7941e-05 Jy ! Component: 650 - total flux cleaned = -4.79856e-05 Jy ! Component: 700 - total flux cleaned = -6.27001e-05 Jy ! Component: 750 - total flux cleaned = -9.18245e-05 Jy ! Component: 800 - total flux cleaned = -0.000120502 Jy ! Component: 850 - total flux cleaned = -0.000155838 Jy ! Component: 900 - total flux cleaned = -0.000183634 Jy ! Component: 950 - total flux cleaned = -0.000183692 Jy ! Component: 1000 - total flux cleaned = -0.000190501 Jy ! Component: 1050 - total flux cleaned = -0.000190435 Jy ! Component: 1100 - total flux cleaned = -0.000190401 Jy ! Component: 1150 - total flux cleaned = -0.000177393 Jy ! Component: 1200 - total flux cleaned = -0.000190287 Jy ! Component: 1250 - total flux cleaned = -0.000183873 Jy ! Component: 1300 - total flux cleaned = -0.000190177 Jy ! Component: 1350 - total flux cleaned = -0.00019012 Jy ! Component: 1400 - total flux cleaned = -0.000183965 Jy ! Component: 1450 - total flux cleaned = -0.000220622 Jy ! Component: 1500 - total flux cleaned = -0.000214462 Jy ! Component: 1550 - total flux cleaned = -0.00023246 Jy ! Component: 1600 - total flux cleaned = -0.000232407 Jy ! Component: 1650 - total flux cleaned = -0.000232443 Jy ! Component: 1700 - total flux cleaned = -0.000261656 Jy ! Component: 1750 - total flux cleaned = -0.00027892 Jy ! Component: 1800 - total flux cleaned = -0.000290329 Jy ! Component: 1850 - total flux cleaned = -0.000296037 Jy ! Component: 1900 - total flux cleaned = -0.000301716 Jy ! Component: 1950 - total flux cleaned = -0.000346341 Jy ! Component: 2000 - total flux cleaned = -0.000368489 Jy ! Total flux subtracted in 2048 components = -0.000379519 Jy ! Clean residual min=-0.000325 max=0.000371 Jy/beam ! Clean residual mean=-0.000000 rms=0.000103 Jy/beam ! Combined flux in latest and established models = 0.0694238 Jy keep ! Adding 149 model components to the UV plane model. ! The established model now contains 242 components and 0.0694238 Jy ![Exited script file: muppet] wmap "J0339+6008_X_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.981 x 1.618 at -82.64 degrees (North through East) ! Clean map min=-0.00060903 max=0.052823 Jy/beam ! Writing clean map to FITS file: J0339+6008_X_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0528226 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000102629 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.582869 0.582869 1.16574 2.33148 4.66295 9.3259 18.6518 37.3036 74.6072 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.052 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.981 x 1.618 at -82.64 degrees (North through East) ! Clean map min=-0.00060903 max=0.052823 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0339+6008_X_2015_03_17_pus_uvs.log closed on Sat Dec 31 18:59:45 2016