! Started logfile: J0336-2036_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:15:47 2017 obs J0336-2036_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0336-2036_S_2014_01_04_pus_uva.fits ! AN table 1: 117 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0336-2036 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9828 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0336-2036_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.944793Jy sigma=0.014851 ! Fit after self-cal, rms=0.868466Jy sigma=0.014029 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.331 mas, bmaj=5.844 mas, bpa=2.2 degrees ! Estimated noise=1115.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0967792 Jy ! Component: 100 - total flux cleaned = 0.119984 Jy ! Total flux subtracted in 100 components = 0.119984 Jy ! Clean residual min=-0.008163 max=0.010201 Jy/beam ! Clean residual mean=-0.000042 rms=0.002230 Jy/beam ! Combined flux in latest and established models = 0.119984 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.119984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087274Jy sigma=0.001304 ! Fit after self-cal, rms=0.087287Jy sigma=0.001301 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.925 mas, bmaj=6.818 mas, bpa=1.041 degrees ! Estimated noise=571.619 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119908 Jy ! Component: 100 - total flux cleaned = 0.0171028 Jy ! Component: 150 - total flux cleaned = 0.0198619 Jy ! Component: 200 - total flux cleaned = 0.0213729 Jy ! Total flux subtracted in 200 components = 0.0213729 Jy ! Clean residual min=-0.008173 max=0.009905 Jy/beam ! Clean residual mean=-0.000065 rms=0.002438 Jy/beam ! Combined flux in latest and established models = 0.141357 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 25 components and 0.141357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084531Jy sigma=0.001376 ! Fit after self-cal, rms=0.084612Jy sigma=0.001376 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* KP 1.00* LA 0.94 ! MK 1.02 NL 0.99 OV 0.94 PT 0.95 ! SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* KP 1.00* LA 0.91 ! MK 1.00 NL 1.08 OV 0.97 PT 0.93 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 3.72 FD 1.00* KP 1.00* LA 0.76 ! MK 0.95 NL 1.09 OV 0.92 PT 0.89 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* KP 1.00* LA 0.84 ! MK 0.94 NL 1.15 OV 0.97 PT 0.94 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.084612Jy sigma=0.001376 ! Fit after self-cal, rms=0.133760Jy sigma=0.000991 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=6.899 mas, bpa=0.7391 degrees ! Estimated noise=601.723 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00655126 Jy ! Component: 100 - total flux cleaned = 0.00900295 Jy ! Component: 150 - total flux cleaned = 0.00933617 Jy ! Component: 200 - total flux cleaned = 0.0094816 Jy ! Total flux subtracted in 200 components = 0.0094816 Jy ! Clean residual min=-0.007258 max=0.005257 Jy/beam ! Clean residual mean=0.000012 rms=0.001494 Jy/beam ! Combined flux in latest and established models = 0.150838 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 45 components and 0.150838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132602Jy sigma=0.000995 ! Fit after self-cal, rms=0.132847Jy sigma=0.000989 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132847Jy sigma=0.000989 ! Fit after self-cal, rms=0.177749Jy sigma=0.000984 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.834 mas, bmaj=6.857 mas, bpa=0.3401 degrees ! Estimated noise=634.892 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00785638 Jy ! Component: 100 - total flux cleaned = 0.0112629 Jy ! Component: 150 - total flux cleaned = 0.011932 Jy ! Component: 200 - total flux cleaned = 0.0120693 Jy ! Total flux subtracted in 200 components = 0.0120693 Jy ! Clean residual min=-0.008690 max=0.005823 Jy/beam ! Clean residual mean=0.000019 rms=0.001718 Jy/beam ! Combined flux in latest and established models = 0.162908 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 50 components and 0.162908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176222Jy sigma=0.000987 ! Fit after self-cal, rms=0.176304Jy sigma=0.000987 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.32821e-05 Jy ! Component: 100 - total flux cleaned = -9.17324e-05 Jy ! Component: 150 - total flux cleaned = -3.25664e-05 Jy ! Component: 200 - total flux cleaned = -3.21386e-05 Jy ! Total flux subtracted in 200 components = -3.21386e-05 Jy ! Clean residual min=-0.008497 max=0.005664 Jy/beam ! Clean residual mean=0.000019 rms=0.001676 Jy/beam ! Combined flux in latest and established models = 0.162876 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 0.162876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176195Jy sigma=0.000987 ! Fit after self-cal, rms=0.176197Jy sigma=0.000987 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176197Jy sigma=0.000987 ! Fit after self-cal, rms=0.161564Jy sigma=0.000932 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.824 mas, bmaj=6.806 mas, bpa=0.2674 degrees ! Estimated noise=646.749 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00336506 Jy ! Component: 100 - total flux cleaned = 0.00472957 Jy ! Component: 150 - total flux cleaned = 0.00490656 Jy ! Component: 200 - total flux cleaned = 0.00494561 Jy ! Total flux subtracted in 200 components = 0.00494561 Jy ! Clean residual min=-0.005469 max=0.004765 Jy/beam ! Clean residual mean=0.000007 rms=0.001230 Jy/beam ! Combined flux in latest and established models = 0.167821 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 61 components and 0.167821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161154Jy sigma=0.000933 ! Fit after self-cal, rms=0.161157Jy sigma=0.000931 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.18204e-05 Jy ! Component: 100 - total flux cleaned = -2.41179e-05 Jy ! Component: 150 - total flux cleaned = 1.27078e-05 Jy ! Component: 200 - total flux cleaned = 8.64084e-05 Jy ! Total flux subtracted in 200 components = 8.64084e-05 Jy ! Clean residual min=-0.005510 max=0.004650 Jy/beam ! Clean residual mean=0.000007 rms=0.001222 Jy/beam ! Combined flux in latest and established models = 0.167908 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 62 components and 0.167908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161113Jy sigma=0.000931 ! Fit after self-cal, rms=0.161115Jy sigma=0.000931 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161115Jy sigma=0.000931 ! Fit after self-cal, rms=0.165829Jy sigma=0.000930 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.579 mas, bmaj=17.45 mas, bpa=5.884 degrees ! Estimated noise=829.573 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00532055 Jy ! Component: 100 - total flux cleaned = 0.00663882 Jy ! Component: 150 - total flux cleaned = 0.00667382 Jy ! Component: 200 - total flux cleaned = 0.00667387 Jy ! Total flux subtracted in 200 components = 0.00667387 Jy ! Clean residual min=-0.006475 max=0.005363 Jy/beam ! Clean residual mean=0.000021 rms=0.001753 Jy/beam ! Combined flux in latest and established models = 0.174582 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.174582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165463Jy sigma=0.000932 ! Fit after self-cal, rms=0.165460Jy sigma=0.000932 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.128e-06 Jy ! Component: 100 - total flux cleaned = -2.09957e-05 Jy ! Component: 150 - total flux cleaned = -7.76553e-05 Jy ! Component: 200 - total flux cleaned = -7.82589e-05 Jy ! Total flux subtracted in 200 components = -7.82589e-05 Jy ! Clean residual min=-0.006397 max=0.005328 Jy/beam ! Clean residual mean=0.000020 rms=0.001740 Jy/beam ! Combined flux in latest and established models = 0.174503 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 65 components and 0.174503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165449Jy sigma=0.000933 ! Fit after self-cal, rms=0.165449Jy sigma=0.000933 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.809 mas, bmaj=6.782 mas, bpa=0.1573 degrees ! Estimated noise=660.144 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.809 x 6.782 at 0.1573 degrees (North through East) ! Clean map min=-0.0057033 max=0.14099 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.242 mas, bmaj=5.875 mas, bpa=1.511 degrees ! Estimated noise=1269.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.11005 Jy ! Component: 100 - total flux cleaned = 0.140024 Jy ! Component: 150 - total flux cleaned = 0.153359 Jy ! Component: 200 - total flux cleaned = 0.160804 Jy ! Total flux subtracted in 200 components = 0.160804 Jy ! Clean residual min=-0.006575 max=0.006073 Jy/beam ! Clean residual mean=-0.000009 rms=0.001514 Jy/beam ! Combined flux in latest and established models = 0.160804 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.160804 Jy ! Inverting map and beam ! Estimated beam: bmin=2.809 mas, bmaj=6.782 mas, bpa=0.1573 degrees ! Estimated noise=660.144 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00792417 Jy ! Component: 100 - total flux cleaned = 0.0123349 Jy ! Component: 150 - total flux cleaned = 0.0141326 Jy ! Component: 200 - total flux cleaned = 0.0149489 Jy ! Total flux subtracted in 200 components = 0.0149489 Jy ! Clean residual min=-0.005223 max=0.003939 Jy/beam ! Clean residual mean=0.000011 rms=0.001232 Jy/beam ! Combined flux in latest and established models = 0.175753 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 49 components and 0.175753 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.579 mas, bmaj=17.45 mas, bpa=5.884 degrees ! Estimated noise=829.573 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137806 Jy ! Component: 100 - total flux cleaned = 0.00156748 Jy ! Component: 150 - total flux cleaned = 0.00145572 Jy ! Component: 200 - total flux cleaned = 0.0014029 Jy ! Total flux subtracted in 200 components = 0.0014029 Jy ! Clean residual min=-0.006248 max=0.004640 Jy/beam ! Clean residual mean=0.000031 rms=0.001751 Jy/beam ! Combined flux in latest and established models = 0.177156 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.92305e-05 Jy ! Component: 100 - total flux cleaned = -0.000240089 Jy ! Component: 150 - total flux cleaned = -0.000372427 Jy ! Component: 200 - total flux cleaned = -0.00049804 Jy ! Total flux subtracted in 200 components = -0.00049804 Jy ! Clean residual min=-0.005994 max=0.004463 Jy/beam ! Clean residual mean=0.000030 rms=0.001702 Jy/beam ! Combined flux in latest and established models = 0.176658 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 0.176658 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.809 mas, bmaj=6.782 mas, bpa=0.1573 degrees ! Estimated noise=660.144 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000845086 Jy ! Component: 100 - total flux cleaned = -0.000915502 Jy ! Component: 150 - total flux cleaned = -0.0010395 Jy ! Component: 200 - total flux cleaned = -0.00121032 Jy ! Total flux subtracted in 200 components = -0.00121032 Jy ! Clean residual min=-0.004755 max=0.003807 Jy/beam ! Clean residual mean=0.000011 rms=0.001149 Jy/beam ! Combined flux in latest and established models = 0.175447 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 70 components and 0.175447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165166Jy sigma=0.000930 ! Fit after self-cal, rms=0.165157Jy sigma=0.000929 wmodel J0336-2036_S_2014_01_04_pus_map.mod ! Writing 70 model components to file: J0336-2036_S_2014_01_04_pus_map.mod wobs J0336-2036_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0336-2036_S_2014_01_04_pus_uvs.fits wwins J0336-2036_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J0336-2036_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00209443 Jy ! Component: 100 - total flux cleaned = -0.00300433 Jy ! Component: 150 - total flux cleaned = -0.00306893 Jy ! Component: 200 - total flux cleaned = -0.00318869 Jy ! Component: 250 - total flux cleaned = -0.00341857 Jy ! Component: 300 - total flux cleaned = -0.00347259 Jy ! Component: 350 - total flux cleaned = -0.00363099 Jy ! Component: 400 - total flux cleaned = -0.00378408 Jy ! Component: 450 - total flux cleaned = -0.00378389 Jy ! Component: 500 - total flux cleaned = -0.00378474 Jy ! Component: 550 - total flux cleaned = -0.00383069 Jy ! Component: 600 - total flux cleaned = -0.00374144 Jy ! Component: 650 - total flux cleaned = -0.00382834 Jy ! Component: 700 - total flux cleaned = -0.00382731 Jy ! Component: 750 - total flux cleaned = -0.00390929 Jy ! Component: 800 - total flux cleaned = -0.0037453 Jy ! Component: 850 - total flux cleaned = -0.00362564 Jy ! Component: 900 - total flux cleaned = -0.00358691 Jy ! Component: 950 - total flux cleaned = -0.00351037 Jy ! Component: 1000 - total flux cleaned = -0.00343551 Jy ! Component: 1050 - total flux cleaned = -0.00336192 Jy ! Component: 1100 - total flux cleaned = -0.00321725 Jy ! Component: 1150 - total flux cleaned = -0.0031468 Jy ! Component: 1200 - total flux cleaned = -0.00304263 Jy ! Component: 1250 - total flux cleaned = -0.00294104 Jy ! Component: 1300 - total flux cleaned = -0.00300813 Jy ! Component: 1350 - total flux cleaned = -0.00290844 Jy ! Component: 1400 - total flux cleaned = -0.0029083 Jy ! Component: 1450 - total flux cleaned = -0.0028117 Jy ! Component: 1500 - total flux cleaned = -0.00284324 Jy ! Component: 1550 - total flux cleaned = -0.00284334 Jy ! Component: 1600 - total flux cleaned = -0.00278166 Jy ! Component: 1650 - total flux cleaned = -0.0028427 Jy ! Component: 1700 - total flux cleaned = -0.00287245 Jy ! Component: 1750 - total flux cleaned = -0.00293189 Jy ! Component: 1800 - total flux cleaned = -0.00302001 Jy ! Component: 1850 - total flux cleaned = -0.00310668 Jy ! Component: 1900 - total flux cleaned = -0.00319297 Jy ! Component: 1950 - total flux cleaned = -0.00322145 Jy ! Component: 2000 - total flux cleaned = -0.00339036 Jy ! Component: 2050 - total flux cleaned = -0.00341819 Jy ! Component: 2100 - total flux cleaned = -0.0034459 Jy ! Component: 2150 - total flux cleaned = -0.00350067 Jy ! Component: 2200 - total flux cleaned = -0.00352791 Jy ! Component: 2250 - total flux cleaned = -0.00352797 Jy ! Component: 2300 - total flux cleaned = -0.00355484 Jy ! Component: 2350 - total flux cleaned = -0.00358107 Jy ! Component: 2400 - total flux cleaned = -0.00358109 Jy ! Component: 2450 - total flux cleaned = -0.00358094 Jy ! Component: 2500 - total flux cleaned = -0.00360665 Jy ! Component: 2550 - total flux cleaned = -0.00358099 Jy ! Component: 2600 - total flux cleaned = -0.00358107 Jy ! Component: 2650 - total flux cleaned = -0.00360648 Jy ! Component: 2700 - total flux cleaned = -0.0036315 Jy ! Component: 2750 - total flux cleaned = -0.00358158 Jy ! Component: 2800 - total flux cleaned = -0.00355682 Jy ! Component: 2850 - total flux cleaned = -0.00358151 Jy ! Component: 2900 - total flux cleaned = -0.00353276 Jy ! Component: 2950 - total flux cleaned = -0.00353285 Jy ! Component: 3000 - total flux cleaned = -0.00360532 Jy ! Component: 3050 - total flux cleaned = -0.00362923 Jy ! Component: 3100 - total flux cleaned = -0.0036054 Jy ! Component: 3150 - total flux cleaned = -0.00362903 Jy ! Component: 3200 - total flux cleaned = -0.00360519 Jy ! Component: 3250 - total flux cleaned = -0.00355831 Jy ! Component: 3300 - total flux cleaned = -0.00360481 Jy ! Component: 3350 - total flux cleaned = -0.0036046 Jy ! Component: 3400 - total flux cleaned = -0.00355827 Jy ! Component: 3450 - total flux cleaned = -0.00353529 Jy ! Component: 3500 - total flux cleaned = -0.00353534 Jy ! Component: 3550 - total flux cleaned = -0.00346695 Jy ! Component: 3600 - total flux cleaned = -0.00346687 Jy ! Component: 3650 - total flux cleaned = -0.00346683 Jy ! Component: 3700 - total flux cleaned = -0.00337661 Jy ! Component: 3750 - total flux cleaned = -0.00335423 Jy ! Component: 3800 - total flux cleaned = -0.00333179 Jy ! Component: 3850 - total flux cleaned = -0.00328744 Jy ! Component: 3900 - total flux cleaned = -0.0033317 Jy ! Component: 3950 - total flux cleaned = -0.00328734 Jy ! Component: 4000 - total flux cleaned = -0.00322134 Jy ! Component: 4050 - total flux cleaned = -0.00315557 Jy ! Total flux subtracted in 4096 components = -0.00315559 Jy ! Clean residual min=-0.001333 max=0.001337 Jy/beam ! Clean residual mean=0.000003 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.172292 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 337 components and 0.172292 Jy ![Exited script file: muppet] wmap "J0336-2036_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.809 x 6.782 at 0.1573 degrees (North through East) ! Clean map min=-0.0026988 max=0.1416 Jy/beam ! Writing clean map to FITS file: J0336-2036_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.141605 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000385677 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.817087 0.817087 1.63417 3.26835 6.5367 13.0734 26.1468 52.2936 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.141 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.809 x 6.782 at 0.1573 degrees (North through East) ! Clean map min=-0.0026988 max=0.1416 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0336-2036_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:15:51 2017