! Started logfile: J0335-0709_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:15:42 2017 obs J0335-0709_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0335-0709_S_2014_01_04_pus_uva.fits ! AN table 1: 175 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.381429 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0335-0709 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9612 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0335-0709_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 612 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 612 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 612 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 612 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.993571Jy sigma=0.012024 ! Fit after self-cal, rms=0.933688Jy sigma=0.011525 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=6.617 mas, bpa=-7.057 degrees ! Estimated noise=920.371 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0529742 Jy ! Component: 100 - total flux cleaned = 0.0647862 Jy ! Total flux subtracted in 100 components = 0.0647862 Jy ! Clean residual min=-0.005709 max=0.006429 Jy/beam ! Clean residual mean=0.000020 rms=0.001640 Jy/beam ! Combined flux in latest and established models = 0.0647861 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0647861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165456Jy sigma=0.000963 ! Fit after self-cal, rms=0.165268Jy sigma=0.000956 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.697 mas, bmaj=7.434 mas, bpa=-9.082 degrees ! Estimated noise=642.241 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00437399 Jy ! Component: 100 - total flux cleaned = 0.00668274 Jy ! Component: 150 - total flux cleaned = 0.00717471 Jy ! Component: 200 - total flux cleaned = 0.00717418 Jy ! Total flux subtracted in 200 components = 0.00717418 Jy ! Clean residual min=-0.005346 max=0.005516 Jy/beam ! Clean residual mean=0.000007 rms=0.001299 Jy/beam ! Combined flux in latest and established models = 0.0719603 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 21 components and 0.0719603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164721Jy sigma=0.000958 ! Fit after self-cal, rms=0.164743Jy sigma=0.000958 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 150 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 1.00* KP 1.00* LA 1.02 ! MK 1.05 NL 1.00 OV 1.09 PT 1.10 ! SC 0.95 ! ! ! Correcting IF 2. ! A total of 150 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* KP 1.00* LA 1.12 ! MK 1.02 NL 1.18 OV 1.31 PT 1.10 ! SC 1.13 ! ! ! Correcting IF 3. ! A total of 150 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 1.00* KP 1.00* LA 0.85 ! MK 1.06 NL 1.02 OV 0.89 PT 1.00 ! SC 0.93 ! ! ! Correcting IF 4. ! A total of 150 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* KP 1.00* LA 0.84 ! MK 1.05 NL 0.92 OV 0.94 PT 1.07 ! SC 0.93 ! ! ! Fit before self-cal, rms=0.164743Jy sigma=0.000958 ! Fit after self-cal, rms=0.122709Jy sigma=0.000945 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.674 mas, bmaj=7.517 mas, bpa=-6.106 degrees ! Estimated noise=693.891 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274037 Jy ! Component: 100 - total flux cleaned = 0.00394827 Jy ! Component: 150 - total flux cleaned = 0.00412383 Jy ! Component: 200 - total flux cleaned = 0.00419762 Jy ! Total flux subtracted in 200 components = 0.00419762 Jy ! Clean residual min=-0.004108 max=0.004104 Jy/beam ! Clean residual mean=0.000010 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.0761579 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 0.0761579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122533Jy sigma=0.000945 ! Fit after self-cal, rms=0.122404Jy sigma=0.000944 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122404Jy sigma=0.000944 ! Fit after self-cal, rms=0.096296Jy sigma=0.000926 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.688 mas, bmaj=7.468 mas, bpa=-5.864 degrees ! Estimated noise=691.548 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000370703 Jy ! Component: 100 - total flux cleaned = 0.00041304 Jy ! Component: 150 - total flux cleaned = 0.000450107 Jy ! Component: 200 - total flux cleaned = 0.0004669 Jy ! Total flux subtracted in 200 components = 0.0004669 Jy ! Clean residual min=-0.002760 max=0.003270 Jy/beam ! Clean residual mean=0.000004 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.0766248 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 32 components and 0.0766248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096284Jy sigma=0.000926 ! Fit after self-cal, rms=0.096392Jy sigma=0.000924 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-29, 33). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017973 Jy ! Component: 100 - total flux cleaned = 0.001382 Jy ! Component: 150 - total flux cleaned = 0.00104223 Jy ! Component: 200 - total flux cleaned = 0.000994681 Jy ! Total flux subtracted in 200 components = 0.000994681 Jy ! Clean residual min=-0.002794 max=0.002406 Jy/beam ! Clean residual mean=0.000007 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.0776195 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.0776195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096269Jy sigma=0.000923 ! Fit after self-cal, rms=0.096210Jy sigma=0.000922 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096210Jy sigma=0.000922 ! Fit after self-cal, rms=0.095564Jy sigma=0.000921 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.673 mas, bmaj=7.434 mas, bpa=-6.117 degrees ! Estimated noise=686.024 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168225 Jy ! Component: 100 - total flux cleaned = 0.00148638 Jy ! Component: 150 - total flux cleaned = 0.0014865 Jy ! Component: 200 - total flux cleaned = 0.00144915 Jy ! Total flux subtracted in 200 components = 0.00144915 Jy ! Clean residual min=-0.002570 max=0.002434 Jy/beam ! Clean residual mean=0.000005 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.0790686 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.0790686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095497Jy sigma=0.000921 ! Fit after self-cal, rms=0.095538Jy sigma=0.000920 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000621164 Jy ! Component: 100 - total flux cleaned = 0.000530782 Jy ! Component: 150 - total flux cleaned = 0.000492305 Jy ! Component: 200 - total flux cleaned = 0.000491118 Jy ! Total flux subtracted in 200 components = 0.000491118 Jy ! Clean residual min=-0.002673 max=0.002506 Jy/beam ! Clean residual mean=0.000005 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.0795598 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 57 components and 0.0795598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095492Jy sigma=0.000920 ! Fit after self-cal, rms=0.095514Jy sigma=0.000919 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095514Jy sigma=0.000919 ! Fit after self-cal, rms=0.095845Jy sigma=0.000919 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.741 mas, bmaj=12.06 mas, bpa=0.9805 degrees ! Estimated noise=837.596 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000938903 Jy ! Component: 100 - total flux cleaned = 0.000897216 Jy ! Component: 150 - total flux cleaned = 0.000896761 Jy ! Component: 200 - total flux cleaned = 0.000896171 Jy ! Total flux subtracted in 200 components = 0.000896171 Jy ! Clean residual min=-0.002245 max=0.002734 Jy/beam ! Clean residual mean=0.000008 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.0804559 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 78 components and 0.0804559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095835Jy sigma=0.000919 ! Fit after self-cal, rms=0.095907Jy sigma=0.000918 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000256824 Jy ! Component: 100 - total flux cleaned = 0.000274138 Jy ! Component: 150 - total flux cleaned = 0.000289361 Jy ! Component: 200 - total flux cleaned = 0.000302962 Jy ! Total flux subtracted in 200 components = 0.000302962 Jy ! Clean residual min=-0.002317 max=0.002682 Jy/beam ! Clean residual mean=0.000007 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.0807589 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 93 components and 0.0807589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095904Jy sigma=0.000918 ! Fit after self-cal, rms=0.095892Jy sigma=0.000918 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.667 mas, bmaj=7.411 mas, bpa=-6.193 degrees ! Estimated noise=683.769 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.667 x 7.411 at -6.193 degrees (North through East) ! Clean map min=-0.0035979 max=0.068762 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=6.535 mas, bpa=-7.163 degrees ! Estimated noise=926.126 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0522271 Jy ! Component: 100 - total flux cleaned = 0.0654945 Jy ! Component: 150 - total flux cleaned = 0.0730526 Jy ! Component: 200 - total flux cleaned = 0.0762482 Jy ! Total flux subtracted in 200 components = 0.0762482 Jy ! Clean residual min=-0.004656 max=0.004453 Jy/beam ! Clean residual mean=0.000010 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 0.0762482 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0762482 Jy ! Inverting map and beam ! Estimated beam: bmin=3.667 mas, bmaj=7.411 mas, bpa=-6.193 degrees ! Estimated noise=683.769 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00301882 Jy ! Component: 100 - total flux cleaned = 0.00352133 Jy ! Component: 150 - total flux cleaned = 0.00360346 Jy ! Component: 200 - total flux cleaned = 0.00359885 Jy ! Total flux subtracted in 200 components = 0.00359885 Jy ! Clean residual min=-0.002893 max=0.002567 Jy/beam ! Clean residual mean=0.000005 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.0798471 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 32 components and 0.0798471 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.741 mas, bmaj=12.06 mas, bpa=0.9805 degrees ! Estimated noise=837.596 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111824 Jy ! Component: 100 - total flux cleaned = 0.00112769 Jy ! Component: 150 - total flux cleaned = 0.00112444 Jy ! Component: 200 - total flux cleaned = 0.00114738 Jy ! Total flux subtracted in 200 components = 0.00114738 Jy ! Clean residual min=-0.002275 max=0.002651 Jy/beam ! Clean residual mean=0.000008 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.0809945 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.0648e-05 Jy ! Component: 100 - total flux cleaned = 3.95358e-05 Jy ! Component: 150 - total flux cleaned = 4.02574e-05 Jy ! Component: 200 - total flux cleaned = 4.02498e-05 Jy ! Total flux subtracted in 200 components = 4.02498e-05 Jy ! Clean residual min=-0.002242 max=0.002644 Jy/beam ! Clean residual mean=0.000007 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.0810347 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 49 components and 0.0810347 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.667 mas, bmaj=7.411 mas, bpa=-6.193 degrees ! Estimated noise=683.769 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.58524e-05 Jy ! Component: 100 - total flux cleaned = -6.02945e-05 Jy ! Component: 150 - total flux cleaned = -5.85399e-05 Jy ! Component: 200 - total flux cleaned = -2.21901e-05 Jy ! Total flux subtracted in 200 components = -2.21901e-05 Jy ! Clean residual min=-0.002539 max=0.002507 Jy/beam ! Clean residual mean=0.000004 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.0810125 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 59 components and 0.0810125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095866Jy sigma=0.000918 ! Fit after self-cal, rms=0.095864Jy sigma=0.000918 wmodel J0335-0709_S_2014_01_04_pus_map.mod ! Writing 59 model components to file: J0335-0709_S_2014_01_04_pus_map.mod wobs J0335-0709_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0335-0709_S_2014_01_04_pus_uvs.fits wwins J0335-0709_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J0335-0709_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000265687 Jy ! Component: 100 - total flux cleaned = -4.53749e-05 Jy ! Component: 150 - total flux cleaned = 0.000117637 Jy ! Component: 200 - total flux cleaned = 0.000272638 Jy ! Component: 250 - total flux cleaned = 0.000347173 Jy ! Component: 300 - total flux cleaned = 0.00045412 Jy ! Component: 350 - total flux cleaned = 0.000387353 Jy ! Component: 400 - total flux cleaned = 0.00038774 Jy ! Component: 450 - total flux cleaned = 0.000325128 Jy ! Component: 500 - total flux cleaned = 0.000294725 Jy ! Component: 550 - total flux cleaned = 0.000119674 Jy ! Component: 600 - total flux cleaned = 9.2307e-05 Jy ! Component: 650 - total flux cleaned = 3.66809e-05 Jy ! Component: 700 - total flux cleaned = 1.00037e-05 Jy ! Component: 750 - total flux cleaned = -4.36167e-05 Jy ! Component: 800 - total flux cleaned = -0.000122094 Jy ! Component: 850 - total flux cleaned = -0.000173443 Jy ! Component: 900 - total flux cleaned = -0.00022393 Jy ! Component: 950 - total flux cleaned = -0.000199532 Jy ! Component: 1000 - total flux cleaned = -0.000126816 Jy ! Component: 1050 - total flux cleaned = -3.13902e-05 Jy ! Component: 1100 - total flux cleaned = 6.25667e-05 Jy ! Component: 1150 - total flux cleaned = 0.000200447 Jy ! Component: 1200 - total flux cleaned = 0.000244961 Jy ! Component: 1250 - total flux cleaned = 0.000244568 Jy ! Component: 1300 - total flux cleaned = 0.000244944 Jy ! Component: 1350 - total flux cleaned = 0.000352668 Jy ! Component: 1400 - total flux cleaned = 0.000373533 Jy ! Component: 1450 - total flux cleaned = 0.000415203 Jy ! Component: 1500 - total flux cleaned = 0.000497132 Jy ! Component: 1550 - total flux cleaned = 0.000557886 Jy ! Component: 1600 - total flux cleaned = 0.00063772 Jy ! Component: 1650 - total flux cleaned = 0.000677242 Jy ! Component: 1700 - total flux cleaned = 0.000735524 Jy ! Component: 1750 - total flux cleaned = 0.000792801 Jy ! Component: 1800 - total flux cleaned = 0.000868394 Jy ! Component: 1850 - total flux cleaned = 0.000942691 Jy ! Component: 1900 - total flux cleaned = 0.000997663 Jy ! Component: 1950 - total flux cleaned = 0.00103383 Jy ! Component: 2000 - total flux cleaned = 0.00114122 Jy ! Component: 2050 - total flux cleaned = 0.0011413 Jy ! Component: 2100 - total flux cleaned = 0.0012114 Jy ! Component: 2150 - total flux cleaned = 0.00124607 Jy ! Component: 2200 - total flux cleaned = 0.00129735 Jy ! Component: 2250 - total flux cleaned = 0.00139845 Jy ! Component: 2300 - total flux cleaned = 0.00148148 Jy ! Component: 2350 - total flux cleaned = 0.00153072 Jy ! Component: 2400 - total flux cleaned = 0.00157944 Jy ! Component: 2450 - total flux cleaned = 0.00162779 Jy ! Component: 2500 - total flux cleaned = 0.00161211 Jy ! Component: 2550 - total flux cleaned = 0.00165938 Jy ! Component: 2600 - total flux cleaned = 0.00162792 Jy ! Component: 2650 - total flux cleaned = 0.00161243 Jy ! Component: 2700 - total flux cleaned = 0.00162772 Jy ! Component: 2750 - total flux cleaned = 0.00161263 Jy ! Component: 2800 - total flux cleaned = 0.00162775 Jy ! Component: 2850 - total flux cleaned = 0.00164265 Jy ! Component: 2900 - total flux cleaned = 0.00168695 Jy ! Component: 2950 - total flux cleaned = 0.00171617 Jy ! Component: 3000 - total flux cleaned = 0.00170181 Jy ! Component: 3050 - total flux cleaned = 0.00177393 Jy ! Component: 3100 - total flux cleaned = 0.00180256 Jy ! Component: 3150 - total flux cleaned = 0.00180258 Jy ! Component: 3200 - total flux cleaned = 0.00184494 Jy ! Component: 3250 - total flux cleaned = 0.00185892 Jy ! Component: 3300 - total flux cleaned = 0.00187297 Jy ! Component: 3350 - total flux cleaned = 0.00187302 Jy ! Component: 3400 - total flux cleaned = 0.00187305 Jy ! Component: 3450 - total flux cleaned = 0.00187295 Jy ! Component: 3500 - total flux cleaned = 0.00183232 Jy ! Component: 3550 - total flux cleaned = 0.00183231 Jy ! Component: 3600 - total flux cleaned = 0.00181881 Jy ! Component: 3650 - total flux cleaned = 0.00176553 Jy ! Component: 3700 - total flux cleaned = 0.00172586 Jy ! Component: 3750 - total flux cleaned = 0.00175212 Jy ! Component: 3800 - total flux cleaned = 0.00168655 Jy ! Component: 3850 - total flux cleaned = 0.00167348 Jy ! Component: 3900 - total flux cleaned = 0.0016086 Jy ! Component: 3950 - total flux cleaned = 0.00159573 Jy ! Component: 4000 - total flux cleaned = 0.00157005 Jy ! Component: 4050 - total flux cleaned = 0.00153165 Jy ! Total flux subtracted in 4096 components = 0.00150621 Jy ! Clean residual min=-0.000933 max=0.000747 Jy/beam ! Clean residual mean=-0.000003 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.0825187 Jy keep ! Adding 239 model components to the UV plane model. ! The established model now contains 297 components and 0.0825187 Jy ![Exited script file: muppet] wmap "J0335-0709_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.667 x 7.411 at -6.193 degrees (North through East) ! Clean map min=-0.0039493 max=0.068617 Jy/beam ! Writing clean map to FITS file: J0335-0709_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0686168 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000209976 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.918039 0.918039 1.83608 3.67216 7.34431 14.6886 29.3773 58.7545 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.068 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.667 x 7.411 at -6.193 degrees (North through East) ! Clean map min=-0.0039493 max=0.068617 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0335-0709_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:15:47 2017