! Started logfile: J0321-0526_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:13:34 2016 obs J0321-0526_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J0321-0526_S_2014_08_05_pus_uva.fits ! AN table 1: 93 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.764158 visibilities/baseline/integration-bin. ! Found source: J0321-0526 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 12792 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0321-0526_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.822769Jy sigma=0.007719 ! Fit after self-cal, rms=0.802666Jy sigma=0.007538 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=10.1 mas, bpa=21.43 degrees ! Estimated noise=1007.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.152197 Jy ! Component: 100 - total flux cleaned = 0.185914 Jy ! Total flux subtracted in 100 components = 0.185914 Jy ! Clean residual min=-0.007151 max=0.011430 Jy/beam ! Clean residual mean=0.000007 rms=0.002011 Jy/beam ! Combined flux in latest and established models = 0.185914 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.185914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127950Jy sigma=0.000846 ! Fit after self-cal, rms=0.127940Jy sigma=0.000846 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.399 mas, bmaj=10.88 mas, bpa=19.36 degrees ! Estimated noise=700.854 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159159 Jy ! Component: 100 - total flux cleaned = 0.0232542 Jy ! Component: 150 - total flux cleaned = 0.0240332 Jy ! Component: 200 - total flux cleaned = 0.0243326 Jy ! Total flux subtracted in 200 components = 0.0243326 Jy ! Clean residual min=-0.004992 max=0.006073 Jy/beam ! Clean residual mean=-0.000004 rms=0.001452 Jy/beam ! Combined flux in latest and established models = 0.210247 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 37 components and 0.210247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124802Jy sigma=0.000829 ! Fit after self-cal, rms=0.124767Jy sigma=0.000829 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.87 HN 1.06 KP 1.07 ! LA 1.11 MK 1.00* NL 0.97 OV 0.96 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 1.13 KP 1.01 ! LA 1.07 MK 1.00* NL 1.02 OV 1.02 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 1.11 HN 1.08 KP 0.90 ! LA 0.84 MK 1.00* NL 1.01 OV 0.98 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 1.05 KP 0.90 ! LA 0.80 MK 1.00* NL 1.11 OV 1.01 ! PT 1.05 SC 0.96 ! ! ! Fit before self-cal, rms=0.124767Jy sigma=0.000829 ! Fit after self-cal, rms=0.112110Jy sigma=0.000803 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.392 mas, bmaj=11.02 mas, bpa=19.91 degrees ! Estimated noise=703.257 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000155625 Jy ! Component: 100 - total flux cleaned = -0.000282138 Jy ! Component: 150 - total flux cleaned = -0.000654094 Jy ! Component: 200 - total flux cleaned = -0.000927968 Jy ! Total flux subtracted in 200 components = -0.000927968 Jy ! Clean residual min=-0.004955 max=0.004987 Jy/beam ! Clean residual mean=0.000001 rms=0.001252 Jy/beam ! Combined flux in latest and established models = 0.209319 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.209319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111946Jy sigma=0.000802 ! Fit after self-cal, rms=0.111896Jy sigma=0.000802 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111896Jy sigma=0.000802 ! Fit after self-cal, rms=0.102847Jy sigma=0.000779 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.381 mas, bmaj=10.98 mas, bpa=19.71 degrees ! Estimated noise=700.542 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000704787 Jy ! Component: 100 - total flux cleaned = -0.000624088 Jy ! Component: 150 - total flux cleaned = -0.00055561 Jy ! Component: 200 - total flux cleaned = -0.000464259 Jy ! Total flux subtracted in 200 components = -0.000464259 Jy ! Clean residual min=-0.002722 max=0.002454 Jy/beam ! Clean residual mean=-0.000002 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.208855 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 62 components and 0.208855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102815Jy sigma=0.000779 ! Fit after self-cal, rms=0.102814Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000117286 Jy ! Component: 100 - total flux cleaned = 0.00029776 Jy ! Component: 150 - total flux cleaned = 0.000366806 Jy ! Component: 200 - total flux cleaned = 0.000452087 Jy ! Total flux subtracted in 200 components = 0.000452087 Jy ! Clean residual min=-0.002685 max=0.002386 Jy/beam ! Clean residual mean=-0.000003 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.209307 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 66 components and 0.209307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102802Jy sigma=0.000779 ! Fit after self-cal, rms=0.102799Jy sigma=0.000779 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102799Jy sigma=0.000779 ! Fit after self-cal, rms=0.102923Jy sigma=0.000779 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.384 mas, bmaj=11 mas, bpa=19.72 degrees ! Estimated noise=701.089 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000375326 Jy ! Component: 100 - total flux cleaned = -0.000322979 Jy ! Component: 150 - total flux cleaned = -0.000253892 Jy ! Component: 200 - total flux cleaned = -0.000171276 Jy ! Total flux subtracted in 200 components = -0.000171276 Jy ! Clean residual min=-0.002596 max=0.002292 Jy/beam ! Clean residual mean=-0.000003 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.209136 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 69 components and 0.209136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102910Jy sigma=0.000779 ! Fit after self-cal, rms=0.102911Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.0823e-05 Jy ! Component: 100 - total flux cleaned = 0.00017815 Jy ! Component: 150 - total flux cleaned = 0.000241726 Jy ! Component: 200 - total flux cleaned = 0.000285597 Jy ! Total flux subtracted in 200 components = 0.000285597 Jy ! Clean residual min=-0.002581 max=0.002241 Jy/beam ! Clean residual mean=-0.000003 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.209421 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 71 components and 0.209421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102906Jy sigma=0.000779 ! Fit after self-cal, rms=0.102905Jy sigma=0.000779 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102905Jy sigma=0.000779 ! Fit after self-cal, rms=0.103060Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.263 mas, bmaj=13.73 mas, bpa=11.73 degrees ! Estimated noise=789.342 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000431947 Jy ! Component: 100 - total flux cleaned = 0.00054151 Jy ! Component: 150 - total flux cleaned = 0.000615157 Jy ! Component: 200 - total flux cleaned = 0.000676629 Jy ! Total flux subtracted in 200 components = 0.000676629 Jy ! Clean residual min=-0.002665 max=0.002492 Jy/beam ! Clean residual mean=-0.000005 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.210098 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 79 components and 0.210098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103060Jy sigma=0.000778 ! Fit after self-cal, rms=0.103062Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.57126e-05 Jy ! Component: 100 - total flux cleaned = 6.54393e-05 Jy ! Component: 150 - total flux cleaned = 7.51495e-05 Jy ! Component: 200 - total flux cleaned = 9.32662e-05 Jy ! Total flux subtracted in 200 components = 9.32662e-05 Jy ! Clean residual min=-0.002678 max=0.002479 Jy/beam ! Clean residual mean=-0.000005 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.210191 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 86 components and 0.210191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103064Jy sigma=0.000778 ! Fit after self-cal, rms=0.103063Jy sigma=0.000778 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.385 mas, bmaj=11.02 mas, bpa=19.74 degrees ! Estimated noise=701.777 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.385 x 11.02 at 19.74 degrees (North through East) ! Clean map min=-0.0027637 max=0.19963 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.589 mas, bmaj=10.24 mas, bpa=21.65 degrees ! Estimated noise=1011.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.152759 Jy ! Component: 100 - total flux cleaned = 0.186742 Jy ! Component: 150 - total flux cleaned = 0.199342 Jy ! Component: 200 - total flux cleaned = 0.205487 Jy ! Total flux subtracted in 200 components = 0.205487 Jy ! Clean residual min=-0.003576 max=0.003413 Jy/beam ! Clean residual mean=0.000001 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 0.205487 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.205487 Jy ! Inverting map and beam ! Estimated beam: bmin=4.385 mas, bmaj=11.02 mas, bpa=19.74 degrees ! Estimated noise=701.777 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334264 Jy ! Component: 100 - total flux cleaned = 0.00399181 Jy ! Component: 150 - total flux cleaned = 0.00444072 Jy ! Component: 200 - total flux cleaned = 0.00471102 Jy ! Total flux subtracted in 200 components = 0.00471102 Jy ! Clean residual min=-0.002587 max=0.002107 Jy/beam ! Clean residual mean=-0.000003 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.210198 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 33 components and 0.210198 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.263 mas, bmaj=13.73 mas, bpa=11.73 degrees ! Estimated noise=789.342 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000533898 Jy ! Component: 100 - total flux cleaned = 0.000529989 Jy ! Component: 150 - total flux cleaned = 0.000545269 Jy ! Component: 200 - total flux cleaned = 0.000556076 Jy ! Total flux subtracted in 200 components = 0.000556076 Jy ! Clean residual min=-0.002670 max=0.002425 Jy/beam ! Clean residual mean=-0.000005 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.210754 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.11063e-06 Jy ! Component: 100 - total flux cleaned = -2.56438e-05 Jy ! Component: 150 - total flux cleaned = -3.31814e-05 Jy ! Component: 200 - total flux cleaned = -4.01428e-05 Jy ! Total flux subtracted in 200 components = -4.01428e-05 Jy ! Clean residual min=-0.002656 max=0.002446 Jy/beam ! Clean residual mean=-0.000005 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.210714 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 54 components and 0.210714 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.385 mas, bmaj=11.02 mas, bpa=19.74 degrees ! Estimated noise=701.777 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000227371 Jy ! Component: 100 - total flux cleaned = -0.00030722 Jy ! Component: 150 - total flux cleaned = -0.000359537 Jy ! Component: 200 - total flux cleaned = -0.000390802 Jy ! Total flux subtracted in 200 components = -0.000390802 Jy ! Clean residual min=-0.002651 max=0.002121 Jy/beam ! Clean residual mean=-0.000003 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.210323 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 69 components and 0.210323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103059Jy sigma=0.000778 ! Fit after self-cal, rms=0.103058Jy sigma=0.000778 wmodel J0321-0526_S_2014_08_05_pus_map.mod ! Writing 69 model components to file: J0321-0526_S_2014_08_05_pus_map.mod wobs J0321-0526_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J0321-0526_S_2014_08_05_pus_uvs.fits wwins J0321-0526_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J0321-0526_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000731154 Jy ! Component: 100 - total flux cleaned = -0.000729167 Jy ! Component: 150 - total flux cleaned = -0.000729011 Jy ! Component: 200 - total flux cleaned = -0.000729531 Jy ! Component: 250 - total flux cleaned = -0.000729749 Jy ! Component: 300 - total flux cleaned = -0.000729725 Jy ! Component: 350 - total flux cleaned = -0.000585746 Jy ! Component: 400 - total flux cleaned = -0.000501635 Jy ! Component: 450 - total flux cleaned = -0.000419697 Jy ! Component: 500 - total flux cleaned = -0.000472387 Jy ! Component: 550 - total flux cleaned = -0.000394557 Jy ! Component: 600 - total flux cleaned = -0.000444837 Jy ! Component: 650 - total flux cleaned = -0.000443889 Jy ! Component: 700 - total flux cleaned = -0.000370995 Jy ! Component: 750 - total flux cleaned = -0.000299709 Jy ! Component: 800 - total flux cleaned = -0.00027681 Jy ! Component: 850 - total flux cleaned = -0.000276813 Jy ! Component: 900 - total flux cleaned = -0.00027642 Jy ! Component: 950 - total flux cleaned = -0.000166051 Jy ! Component: 1000 - total flux cleaned = -0.000100978 Jy ! Component: 1050 - total flux cleaned = -3.74036e-05 Jy ! Component: 1100 - total flux cleaned = 4.28959e-06 Jy ! Component: 1150 - total flux cleaned = 6.5986e-05 Jy ! Component: 1200 - total flux cleaned = 0.000126592 Jy ! Component: 1250 - total flux cleaned = 0.00020605 Jy ! Component: 1300 - total flux cleaned = 0.000245166 Jy ! Component: 1350 - total flux cleaned = 0.000341775 Jy ! Component: 1400 - total flux cleaned = 0.000418141 Jy ! Component: 1450 - total flux cleaned = 0.000493105 Jy ! Component: 1500 - total flux cleaned = 0.000530146 Jy ! Component: 1550 - total flux cleaned = 0.000548919 Jy ! Component: 1600 - total flux cleaned = 0.000693623 Jy ! Component: 1650 - total flux cleaned = 0.000658046 Jy ! Component: 1700 - total flux cleaned = 0.000763864 Jy ! Component: 1750 - total flux cleaned = 0.000763985 Jy ! Component: 1800 - total flux cleaned = 0.000832842 Jy ! Component: 1850 - total flux cleaned = 0.000832906 Jy ! Component: 1900 - total flux cleaned = 0.000883139 Jy ! Component: 1950 - total flux cleaned = 0.000866915 Jy ! Component: 2000 - total flux cleaned = 0.000899494 Jy ! Component: 2050 - total flux cleaned = 0.000915713 Jy ! Component: 2100 - total flux cleaned = 0.00091554 Jy ! Component: 2150 - total flux cleaned = 0.000947132 Jy ! Component: 2200 - total flux cleaned = 0.000993836 Jy ! Component: 2250 - total flux cleaned = 0.00105533 Jy ! Component: 2300 - total flux cleaned = 0.00104033 Jy ! Component: 2350 - total flux cleaned = 0.00113108 Jy ! Component: 2400 - total flux cleaned = 0.0011461 Jy ! Component: 2450 - total flux cleaned = 0.00117569 Jy ! Component: 2500 - total flux cleaned = 0.00126388 Jy ! Component: 2550 - total flux cleaned = 0.00132186 Jy ! Component: 2600 - total flux cleaned = 0.00129304 Jy ! Component: 2650 - total flux cleaned = 0.00136448 Jy ! Component: 2700 - total flux cleaned = 0.00140693 Jy ! Component: 2750 - total flux cleaned = 0.00143504 Jy ! Component: 2800 - total flux cleaned = 0.00149069 Jy ! Component: 2850 - total flux cleaned = 0.00151804 Jy ! Component: 2900 - total flux cleaned = 0.00155901 Jy ! Component: 2950 - total flux cleaned = 0.00172136 Jy ! Component: 3000 - total flux cleaned = 0.00176146 Jy ! Component: 3050 - total flux cleaned = 0.00185447 Jy ! Component: 3100 - total flux cleaned = 0.00181485 Jy ! Component: 3150 - total flux cleaned = 0.00189334 Jy ! Component: 3200 - total flux cleaned = 0.0019453 Jy ! Component: 3250 - total flux cleaned = 0.00198385 Jy ! Component: 3300 - total flux cleaned = 0.00202242 Jy ! Component: 3350 - total flux cleaned = 0.00207326 Jy ! Component: 3400 - total flux cleaned = 0.00216168 Jy ! Component: 3450 - total flux cleaned = 0.00226176 Jy ! Component: 3500 - total flux cleaned = 0.0023364 Jy ! Component: 3550 - total flux cleaned = 0.00233644 Jy ! Component: 3600 - total flux cleaned = 0.00243461 Jy ! Component: 3650 - total flux cleaned = 0.00254407 Jy ! Component: 3700 - total flux cleaned = 0.00254405 Jy ! Component: 3750 - total flux cleaned = 0.00266433 Jy ! Component: 3800 - total flux cleaned = 0.00268817 Jy ! Component: 3850 - total flux cleaned = 0.00277122 Jy ! Component: 3900 - total flux cleaned = 0.00284194 Jy ! Component: 3950 - total flux cleaned = 0.00292382 Jy ! Component: 4000 - total flux cleaned = 0.00294713 Jy ! Component: 4050 - total flux cleaned = 0.00301643 Jy ! Total flux subtracted in 4096 components = 0.00307388 Jy ! Clean residual min=-0.000705 max=0.000759 Jy/beam ! Clean residual mean=-0.000001 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.213397 Jy keep ! Adding 268 model components to the UV plane model. ! The established model now contains 337 components and 0.213397 Jy ![Exited script file: muppet] wmap "J0321-0526_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.385 x 11.02 at 19.74 degrees (North through East) ! Clean map min=-0.0027069 max=0.19938 Jy/beam ! Writing clean map to FITS file: J0321-0526_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.199376 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000224141 device "J0321-0526_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0321-0526_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.337264 0.337264 0.674528 1.34906 2.69811 5.39622 10.7924 21.5849 43.1698 86.3395 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.199 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.385 x 11.02 at 19.74 degrees (North through East) ! Clean map min=-0.0027069 max=0.19938 Jy/beam quit ! Quitting program ! Log file J0321-0526_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:13:40 2016