! Started logfile: J0320-3837_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:03:45 2017 obs J0320-3837_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0320-3837_S_2015_01_23_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.789071 visibilities/baseline/integration-bin. ! Found source: J0320-3837 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 17328 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0320-3837_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.939627Jy sigma=0.006086 ! Fit after self-cal, rms=0.886818Jy sigma=0.005835 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.168 mas, bmaj=6.633 mas, bpa=-8.446 degrees ! Estimated noise=1721.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0882874 Jy ! Component: 100 - total flux cleaned = 0.116183 Jy ! Total flux subtracted in 100 components = 0.116183 Jy ! Clean residual min=-0.009303 max=0.015347 Jy/beam ! Clean residual mean=0.000003 rms=0.002502 Jy/beam ! Combined flux in latest and established models = 0.116183 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.116183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223590Jy sigma=0.000855 ! Fit after self-cal, rms=0.223402Jy sigma=0.000854 ! Inverting map ! Added new window around map position (2.5, -16.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175565 Jy ! Component: 100 - total flux cleaned = 0.0284587 Jy ! Total flux subtracted in 100 components = 0.0284587 Jy ! Clean residual min=-0.008829 max=0.010895 Jy/beam ! Clean residual mean=0.000027 rms=0.002069 Jy/beam ! Combined flux in latest and established models = 0.144641 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 0.144641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219947Jy sigma=0.000833 ! Fit after self-cal, rms=0.219912Jy sigma=0.000832 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.733 mas, bmaj=7.915 mas, bpa=-8.587 degrees ! Estimated noise=881.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167899 Jy ! Component: 100 - total flux cleaned = 0.0271313 Jy ! Component: 150 - total flux cleaned = 0.0340075 Jy ! Component: 200 - total flux cleaned = 0.038604 Jy ! Total flux subtracted in 200 components = 0.038604 Jy ! Clean residual min=-0.008618 max=0.009243 Jy/beam ! Clean residual mean=0.000075 rms=0.002212 Jy/beam ! Combined flux in latest and established models = 0.183245 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 68 components and 0.183245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217075Jy sigma=0.000824 ! Fit after self-cal, rms=0.216849Jy sigma=0.000823 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.50 HN 1.31 KP 1.19 ! LA 1.07 MK 0.98 NL 1.20 OV 0.98 ! PT 1.12 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.65 HN 1.36 KP 1.06 ! LA 1.04 MK 1.00 NL 1.21 OV 1.04 ! PT 1.05 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.63 HN 1.20 KP 0.92 ! LA 0.81 MK 1.08 NL 1.15 OV 0.97 ! PT 1.04 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.65 HN 1.28 KP 0.88 ! LA 0.88 MK 1.03 NL 1.06 OV 1.03 ! PT 1.05 SC 0.95 ! ! ! Fit before self-cal, rms=0.216849Jy sigma=0.000823 ! Fit after self-cal, rms=0.173570Jy sigma=0.000802 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.769 mas, bmaj=7.903 mas, bpa=-8.244 degrees ! Estimated noise=905.226 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000564757 Jy ! Component: 100 - total flux cleaned = -0.000755816 Jy ! Component: 150 - total flux cleaned = -0.000800927 Jy ! Component: 200 - total flux cleaned = -0.000760894 Jy ! Total flux subtracted in 200 components = -0.000760894 Jy ! Clean residual min=-0.003214 max=0.003757 Jy/beam ! Clean residual mean=0.000013 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.182484 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 89 components and 0.182485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173518Jy sigma=0.000802 ! Fit after self-cal, rms=0.173074Jy sigma=0.000801 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173074Jy sigma=0.000801 ! Fit after self-cal, rms=0.172520Jy sigma=0.000800 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.763 mas, bmaj=7.886 mas, bpa=-8.232 degrees ! Estimated noise=905.937 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0005523 Jy ! Component: 100 - total flux cleaned = -0.000462222 Jy ! Component: 150 - total flux cleaned = -0.000497303 Jy ! Component: 200 - total flux cleaned = -0.00059554 Jy ! Total flux subtracted in 200 components = -0.00059554 Jy ! Clean residual min=-0.003074 max=0.003566 Jy/beam ! Clean residual mean=0.000011 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.181889 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 99 components and 0.181889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172481Jy sigma=0.000800 ! Fit after self-cal, rms=0.172446Jy sigma=0.000800 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-48, -124). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295584 Jy ! Component: 100 - total flux cleaned = 0.00313334 Jy ! Component: 150 - total flux cleaned = 0.00326866 Jy ! Component: 200 - total flux cleaned = 0.00338985 Jy ! Total flux subtracted in 200 components = 0.00338985 Jy ! Clean residual min=-0.002852 max=0.002871 Jy/beam ! Clean residual mean=0.000006 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.185279 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 113 components and 0.185279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172383Jy sigma=0.000800 ! Fit after self-cal, rms=0.172360Jy sigma=0.000800 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172360Jy sigma=0.000800 ! Fit after self-cal, rms=0.171618Jy sigma=0.000799 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.758 mas, bmaj=7.877 mas, bpa=-8.17 degrees ! Estimated noise=906.096 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000207565 Jy ! Component: 100 - total flux cleaned = 0.000437408 Jy ! Component: 150 - total flux cleaned = 0.000639609 Jy ! Component: 200 - total flux cleaned = 0.000712253 Jy ! Total flux subtracted in 200 components = 0.000712253 Jy ! Clean residual min=-0.002634 max=0.002782 Jy/beam ! Clean residual mean=0.000004 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.185991 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 125 components and 0.185991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171592Jy sigma=0.000799 ! Fit after self-cal, rms=0.171568Jy sigma=0.000799 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.53875e-05 Jy ! Component: 100 - total flux cleaned = -6.08283e-05 Jy ! Component: 150 - total flux cleaned = -3.03836e-05 Jy ! Component: 200 - total flux cleaned = -1.34429e-06 Jy ! Total flux subtracted in 200 components = -1.34429e-06 Jy ! Clean residual min=-0.002578 max=0.002784 Jy/beam ! Clean residual mean=0.000003 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.18599 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 129 components and 0.18599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171554Jy sigma=0.000799 ! Fit after self-cal, rms=0.171549Jy sigma=0.000799 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171549Jy sigma=0.000799 ! Fit after self-cal, rms=0.172203Jy sigma=0.000799 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.438 mas, bmaj=22.25 mas, bpa=-2.934 degrees ! Estimated noise=1221.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000277576 Jy ! Component: 100 - total flux cleaned = 0.000227864 Jy ! Component: 150 - total flux cleaned = 0.000227487 Jy ! Component: 200 - total flux cleaned = 0.000186159 Jy ! Total flux subtracted in 200 components = 0.000186159 Jy ! Clean residual min=-0.003162 max=0.003578 Jy/beam ! Clean residual mean=0.000007 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.186176 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 139 components and 0.186176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172196Jy sigma=0.000799 ! Fit after self-cal, rms=0.172208Jy sigma=0.000799 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.43719e-05 Jy ! Component: 100 - total flux cleaned = -6.54091e-05 Jy ! Component: 150 - total flux cleaned = -0.000102534 Jy ! Component: 200 - total flux cleaned = -0.000119959 Jy ! Total flux subtracted in 200 components = -0.000119959 Jy ! Clean residual min=-0.003146 max=0.003626 Jy/beam ! Clean residual mean=0.000006 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.186056 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 141 components and 0.186056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172206Jy sigma=0.000799 ! Fit after self-cal, rms=0.172205Jy sigma=0.000799 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.754 mas, bmaj=7.863 mas, bpa=-8.111 degrees ! Estimated noise=907.126 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.754 x 7.863 at -8.111 degrees (North through East) ! Clean map min=-0.003951 max=0.1185 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.161 mas, bmaj=6.526 mas, bpa=-7.866 degrees ! Estimated noise=1778.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0896971 Jy ! Component: 100 - total flux cleaned = 0.12252 Jy ! Component: 150 - total flux cleaned = 0.14222 Jy ! Component: 200 - total flux cleaned = 0.154793 Jy ! Total flux subtracted in 200 components = 0.154793 Jy ! Clean residual min=-0.006802 max=0.006801 Jy/beam ! Clean residual mean=-0.000004 rms=0.001792 Jy/beam ! Combined flux in latest and established models = 0.154793 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.154793 Jy ! Inverting map and beam ! Estimated beam: bmin=2.754 mas, bmaj=7.863 mas, bpa=-8.111 degrees ! Estimated noise=907.126 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110326 Jy ! Component: 100 - total flux cleaned = 0.0172561 Jy ! Component: 150 - total flux cleaned = 0.0214708 Jy ! Component: 200 - total flux cleaned = 0.024523 Jy ! Total flux subtracted in 200 components = 0.024523 Jy ! Clean residual min=-0.003025 max=0.003167 Jy/beam ! Clean residual mean=-0.000000 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.179316 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 70 components and 0.179316 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.438 mas, bmaj=22.25 mas, bpa=-2.934 degrees ! Estimated noise=1221.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00320427 Jy ! Component: 100 - total flux cleaned = 0.00485071 Jy ! Component: 150 - total flux cleaned = 0.00522648 Jy ! Component: 200 - total flux cleaned = 0.00541983 Jy ! Total flux subtracted in 200 components = 0.00541983 Jy ! Clean residual min=-0.003330 max=0.003314 Jy/beam ! Clean residual mean=0.000009 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 0.184735 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.31483e-05 Jy ! Component: 100 - total flux cleaned = 6.34953e-05 Jy ! Component: 150 - total flux cleaned = 6.21453e-05 Jy ! Component: 200 - total flux cleaned = 0.000114705 Jy ! Total flux subtracted in 200 components = 0.000114705 Jy ! Clean residual min=-0.003273 max=0.003354 Jy/beam ! Clean residual mean=0.000009 rms=0.000944 Jy/beam ! Combined flux in latest and established models = 0.18485 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 99 components and 0.18485 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.754 mas, bmaj=7.863 mas, bpa=-8.111 degrees ! Estimated noise=907.126 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000918684 Jy ! Component: 100 - total flux cleaned = -0.000918855 Jy ! Component: 150 - total flux cleaned = -0.000865601 Jy ! Component: 200 - total flux cleaned = -0.000869907 Jy ! Total flux subtracted in 200 components = -0.000869907 Jy ! Clean residual min=-0.002767 max=0.002927 Jy/beam ! Clean residual mean=0.000002 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.18398 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 114 components and 0.18398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172255Jy sigma=0.000799 ! Fit after self-cal, rms=0.172242Jy sigma=0.000799 wmodel J0320-3837_S_2015_01_23_pus_map.mod ! Writing 114 model components to file: J0320-3837_S_2015_01_23_pus_map.mod wobs J0320-3837_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0320-3837_S_2015_01_23_pus_uvs.fits wwins J0320-3837_S_2015_01_23_pus_map.win ! wwins: Wrote 4 windows to J0320-3837_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000863591 Jy ! Component: 100 - total flux cleaned = 0.00134553 Jy ! Component: 150 - total flux cleaned = 0.00152774 Jy ! Component: 200 - total flux cleaned = 0.00165939 Jy ! Component: 250 - total flux cleaned = 0.001874 Jy ! Component: 300 - total flux cleaned = 0.00204102 Jy ! Component: 350 - total flux cleaned = 0.00228561 Jy ! Component: 400 - total flux cleaned = 0.00252244 Jy ! Component: 450 - total flux cleaned = 0.00267766 Jy ! Component: 500 - total flux cleaned = 0.00286618 Jy ! Component: 550 - total flux cleaned = 0.0029032 Jy ! Component: 600 - total flux cleaned = 0.00297577 Jy ! Component: 650 - total flux cleaned = 0.00308269 Jy ! Component: 700 - total flux cleaned = 0.00322188 Jy ! Component: 750 - total flux cleaned = 0.00328969 Jy ! Component: 800 - total flux cleaned = 0.00339049 Jy ! Component: 850 - total flux cleaned = 0.00348947 Jy ! Component: 900 - total flux cleaned = 0.00365091 Jy ! Component: 950 - total flux cleaned = 0.0036818 Jy ! Component: 1000 - total flux cleaned = 0.0036815 Jy ! Component: 1050 - total flux cleaned = 0.00365033 Jy ! Component: 1100 - total flux cleaned = 0.00359008 Jy ! Component: 1150 - total flux cleaned = 0.00370923 Jy ! Component: 1200 - total flux cleaned = 0.00373786 Jy ! Component: 1250 - total flux cleaned = 0.00382423 Jy ! Component: 1300 - total flux cleaned = 0.00370899 Jy ! Component: 1350 - total flux cleaned = 0.00376579 Jy ! Component: 1400 - total flux cleaned = 0.00382147 Jy ! Component: 1450 - total flux cleaned = 0.00390448 Jy ! Component: 1500 - total flux cleaned = 0.00398656 Jy ! Component: 1550 - total flux cleaned = 0.00398694 Jy ! Component: 1600 - total flux cleaned = 0.00398696 Jy ! Component: 1650 - total flux cleaned = 0.00409243 Jy ! Component: 1700 - total flux cleaned = 0.00414441 Jy ! Component: 1750 - total flux cleaned = 0.00429855 Jy ! Component: 1800 - total flux cleaned = 0.00432345 Jy ! Component: 1850 - total flux cleaned = 0.00439868 Jy ! Component: 1900 - total flux cleaned = 0.00447314 Jy ! Component: 1950 - total flux cleaned = 0.00454738 Jy ! Component: 2000 - total flux cleaned = 0.00466973 Jy ! Component: 2050 - total flux cleaned = 0.0048145 Jy ! Component: 2100 - total flux cleaned = 0.00495803 Jy ! Component: 2150 - total flux cleaned = 0.00512409 Jy ! Component: 2200 - total flux cleaned = 0.00521804 Jy ! Component: 2250 - total flux cleaned = 0.00531161 Jy ! Component: 2300 - total flux cleaned = 0.005519 Jy ! Component: 2350 - total flux cleaned = 0.00558737 Jy ! Component: 2400 - total flux cleaned = 0.0057235 Jy ! Component: 2450 - total flux cleaned = 0.00574599 Jy ! Component: 2500 - total flux cleaned = 0.00590212 Jy ! Component: 2550 - total flux cleaned = 0.00601272 Jy ! Component: 2600 - total flux cleaned = 0.00612235 Jy ! Component: 2650 - total flux cleaned = 0.00625245 Jy ! Component: 2700 - total flux cleaned = 0.00627383 Jy ! Component: 2750 - total flux cleaned = 0.00633821 Jy ! Component: 2800 - total flux cleaned = 0.00646554 Jy ! Component: 2850 - total flux cleaned = 0.00654955 Jy ! Component: 2900 - total flux cleaned = 0.00667468 Jy ! Component: 2950 - total flux cleaned = 0.00675721 Jy ! Component: 3000 - total flux cleaned = 0.00688034 Jy ! Component: 3050 - total flux cleaned = 0.00690071 Jy ! Component: 3100 - total flux cleaned = 0.00702174 Jy ! Component: 3150 - total flux cleaned = 0.00708162 Jy ! Component: 3200 - total flux cleaned = 0.00716107 Jy ! Component: 3250 - total flux cleaned = 0.00720065 Jy ! Component: 3300 - total flux cleaned = 0.0072986 Jy ! Component: 3350 - total flux cleaned = 0.00737617 Jy ! Component: 3400 - total flux cleaned = 0.00737606 Jy ! Component: 3450 - total flux cleaned = 0.00745279 Jy ! Component: 3500 - total flux cleaned = 0.00754771 Jy ! Component: 3550 - total flux cleaned = 0.00756668 Jy ! Component: 3600 - total flux cleaned = 0.00762325 Jy ! Component: 3650 - total flux cleaned = 0.00769767 Jy ! Component: 3700 - total flux cleaned = 0.00775308 Jy ! Component: 3750 - total flux cleaned = 0.00780821 Jy ! Component: 3800 - total flux cleaned = 0.00791757 Jy ! Component: 3850 - total flux cleaned = 0.00802631 Jy ! Component: 3900 - total flux cleaned = 0.00809787 Jy ! Component: 3950 - total flux cleaned = 0.00813345 Jy ! Component: 4000 - total flux cleaned = 0.00813331 Jy ! Component: 4050 - total flux cleaned = 0.00816861 Jy ! Total flux subtracted in 4096 components = 0.0081861 Jy ! Clean residual min=-0.001067 max=0.001007 Jy/beam ! Clean residual mean=0.000006 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.192166 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 384 components and 0.192166 Jy ![Exited script file: muppet] wmap "J0320-3837_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.754 x 7.863 at -8.111 degrees (North through East) ! Clean map min=-0.0020421 max=0.11807 Jy/beam ! Writing clean map to FITS file: J0320-3837_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.11807 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000319956 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.812965 0.812965 1.62593 3.25186 6.50372 13.0074 26.0149 52.0297 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.118 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.754 x 7.863 at -8.111 degrees (North through East) ! Clean map min=-0.0020421 max=0.11807 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0320-3837_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:03:51 2017