! Started logfile: J0319+3101_S_2014_08_09_pus_uvs.log on Tue Nov 29 22:53:23 2016 obs J0319+3101_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J0319+3101_S_2014_08_09_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.693948 visibilities/baseline/integration-bin. ! Found source: J0319+3101 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 15364 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0319+3101_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 200 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 200 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 200 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 200 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.977630Jy sigma=0.011781 ! Fit after self-cal, rms=0.955389Jy sigma=0.011570 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.632 mas, bmaj=7.198 mas, bpa=19.38 degrees ! Estimated noise=665.811 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0347682 Jy ! Component: 100 - total flux cleaned = 0.0426882 Jy ! Total flux subtracted in 100 components = 0.0426882 Jy ! Clean residual min=-0.002747 max=0.002920 Jy/beam ! Clean residual mean=-0.000003 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.0426882 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0426882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071348Jy sigma=0.000763 ! Fit after self-cal, rms=0.070961Jy sigma=0.000759 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.313 mas, bmaj=7.64 mas, bpa=18.77 degrees ! Estimated noise=482.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429723 Jy ! Component: 100 - total flux cleaned = 0.00615987 Jy ! Component: 150 - total flux cleaned = 0.00717138 Jy ! Component: 200 - total flux cleaned = 0.00781069 Jy ! Total flux subtracted in 200 components = 0.00781069 Jy ! Clean residual min=-0.001859 max=0.001899 Jy/beam ! Clean residual mean=-0.000001 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.0504989 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 30 components and 0.0504989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070626Jy sigma=0.000757 ! Fit after self-cal, rms=0.070603Jy sigma=0.000757 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.85 HN 1.01 KP 1.09 ! LA 1.06 MK 1.00* NL 0.97 OV 1.00 ! PT 1.07 SC 0.93 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.07 KP 1.02 ! LA 1.03 MK 1.00* NL 1.03 OV 1.13 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.14 HN 1.02 KP 0.93 ! LA 0.84 MK 1.00* NL 1.04 OV 0.96 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.05 HN 1.03 KP 0.81 ! LA 0.82 MK 1.00* NL 1.07 OV 1.08 ! PT 1.08 SC 0.89 ! ! ! Fit before self-cal, rms=0.070603Jy sigma=0.000757 ! Fit after self-cal, rms=0.068773Jy sigma=0.000754 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.276 mas, bmaj=7.655 mas, bpa=19.22 degrees ! Estimated noise=483.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000990392 Jy ! Component: 100 - total flux cleaned = 0.000992906 Jy ! Component: 150 - total flux cleaned = 0.000977745 Jy ! Component: 200 - total flux cleaned = 0.000991858 Jy ! Total flux subtracted in 200 components = 0.000991858 Jy ! Clean residual min=-0.001855 max=0.001656 Jy/beam ! Clean residual mean=0.000002 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.0514908 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.0514908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068745Jy sigma=0.000754 ! Fit after self-cal, rms=0.068704Jy sigma=0.000753 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068704Jy sigma=0.000753 ! Fit after self-cal, rms=0.066311Jy sigma=0.000751 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.289 mas, bmaj=7.647 mas, bpa=18.68 degrees ! Estimated noise=484.346 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000780394 Jy ! Component: 100 - total flux cleaned = 0.00108275 Jy ! Component: 150 - total flux cleaned = 0.00110279 Jy ! Component: 200 - total flux cleaned = 0.00111105 Jy ! Total flux subtracted in 200 components = 0.00111105 Jy ! Clean residual min=-0.001493 max=0.001284 Jy/beam ! Clean residual mean=-0.000001 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.0526018 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 0.0526018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066301Jy sigma=0.000751 ! Fit after self-cal, rms=0.066270Jy sigma=0.000751 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000132084 Jy ! Component: 100 - total flux cleaned = 0.000142414 Jy ! Component: 150 - total flux cleaned = 0.000142926 Jy ! Component: 200 - total flux cleaned = 0.000128809 Jy ! Total flux subtracted in 200 components = 0.000128809 Jy ! Clean residual min=-0.001434 max=0.001254 Jy/beam ! Clean residual mean=-0.000000 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.0527306 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.0527306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066268Jy sigma=0.000751 ! Fit after self-cal, rms=0.066266Jy sigma=0.000751 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066266Jy sigma=0.000751 ! Fit after self-cal, rms=0.066325Jy sigma=0.000751 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.283 mas, bmaj=7.633 mas, bpa=18.49 degrees ! Estimated noise=485.112 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000526284 Jy ! Component: 100 - total flux cleaned = 0.000798605 Jy ! Component: 150 - total flux cleaned = 0.000838969 Jy ! Component: 200 - total flux cleaned = 0.000860317 Jy ! Total flux subtracted in 200 components = 0.000860317 Jy ! Clean residual min=-0.001409 max=0.001257 Jy/beam ! Clean residual mean=-0.000001 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.053591 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.053591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066320Jy sigma=0.000751 ! Fit after self-cal, rms=0.066315Jy sigma=0.000751 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.74991e-05 Jy ! Component: 100 - total flux cleaned = 8.00968e-05 Jy ! Component: 150 - total flux cleaned = 6.68793e-05 Jy ! Component: 200 - total flux cleaned = 6.67813e-05 Jy ! Total flux subtracted in 200 components = 6.67813e-05 Jy ! Clean residual min=-0.001410 max=0.001275 Jy/beam ! Clean residual mean=-0.000001 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.0536577 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.0536577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066313Jy sigma=0.000751 ! Fit after self-cal, rms=0.066308Jy sigma=0.000751 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066308Jy sigma=0.000751 ! Fit after self-cal, rms=0.066389Jy sigma=0.000751 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.784 mas, bmaj=9.353 mas, bpa=1.706 degrees ! Estimated noise=575.144 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000600301 Jy ! Component: 100 - total flux cleaned = 0.000873365 Jy ! Component: 150 - total flux cleaned = 0.000914717 Jy ! Component: 200 - total flux cleaned = 0.000926424 Jy ! Total flux subtracted in 200 components = 0.000926424 Jy ! Clean residual min=-0.001667 max=0.001411 Jy/beam ! Clean residual mean=-0.000001 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.0545842 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 55 components and 0.0545842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066387Jy sigma=0.000751 ! Fit after self-cal, rms=0.066385Jy sigma=0.000751 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.73039e-05 Jy ! Component: 100 - total flux cleaned = 8.63601e-05 Jy ! Component: 150 - total flux cleaned = 8.59632e-05 Jy ! Component: 200 - total flux cleaned = 8.61816e-05 Jy ! Total flux subtracted in 200 components = 8.61816e-05 Jy ! Clean residual min=-0.001654 max=0.001425 Jy/beam ! Clean residual mean=-0.000001 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.0546704 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 57 components and 0.0546703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066385Jy sigma=0.000751 ! Fit after self-cal, rms=0.066384Jy sigma=0.000751 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.279 mas, bmaj=7.621 mas, bpa=18.3 degrees ! Estimated noise=485.648 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.279 x 7.621 at 18.3 degrees (North through East) ! Clean map min=-0.0013358 max=0.045949 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.606 mas, bmaj=7.169 mas, bpa=18.6 degrees ! Estimated noise=658.313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0348134 Jy ! Component: 100 - total flux cleaned = 0.0435596 Jy ! Component: 150 - total flux cleaned = 0.0473992 Jy ! Component: 200 - total flux cleaned = 0.0495045 Jy ! Total flux subtracted in 200 components = 0.0495045 Jy ! Clean residual min=-0.002095 max=0.001859 Jy/beam ! Clean residual mean=-0.000002 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.0495045 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0495045 Jy ! Inverting map and beam ! Estimated beam: bmin=4.279 mas, bmaj=7.621 mas, bpa=18.3 degrees ! Estimated noise=485.648 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002181 Jy ! Component: 100 - total flux cleaned = 0.00314978 Jy ! Component: 150 - total flux cleaned = 0.00359996 Jy ! Component: 200 - total flux cleaned = 0.0039598 Jy ! Total flux subtracted in 200 components = 0.0039598 Jy ! Clean residual min=-0.001409 max=0.001229 Jy/beam ! Clean residual mean=-0.000001 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.0534643 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 45 components and 0.0534643 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.784 mas, bmaj=9.353 mas, bpa=1.706 degrees ! Estimated noise=575.144 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000613903 Jy ! Component: 100 - total flux cleaned = 0.000792161 Jy ! Component: 150 - total flux cleaned = 0.000927754 Jy ! Component: 200 - total flux cleaned = 0.00104313 Jy ! Total flux subtracted in 200 components = 0.00104313 Jy ! Clean residual min=-0.001647 max=0.001393 Jy/beam ! Clean residual mean=-0.000001 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.0545075 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.79367e-05 Jy ! Component: 100 - total flux cleaned = 0.000118915 Jy ! Component: 150 - total flux cleaned = 0.000144498 Jy ! Component: 200 - total flux cleaned = 0.000167563 Jy ! Total flux subtracted in 200 components = 0.000167563 Jy ! Clean residual min=-0.001637 max=0.001382 Jy/beam ! Clean residual mean=-0.000001 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.054675 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 76 components and 0.054675 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.279 mas, bmaj=7.621 mas, bpa=18.3 degrees ! Estimated noise=485.648 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.5896e-06 Jy ! Component: 100 - total flux cleaned = -1.49194e-05 Jy ! Component: 150 - total flux cleaned = -4.55287e-06 Jy ! Component: 200 - total flux cleaned = -4.2324e-06 Jy ! Total flux subtracted in 200 components = -4.2324e-06 Jy ! Clean residual min=-0.001324 max=0.001222 Jy/beam ! Clean residual mean=-0.000001 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.0546708 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 92 components and 0.0546708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066369Jy sigma=0.000751 ! Fit after self-cal, rms=0.066366Jy sigma=0.000750 wmodel J0319+3101_S_2014_08_09_pus_map.mod ! Writing 92 model components to file: J0319+3101_S_2014_08_09_pus_map.mod wobs J0319+3101_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J0319+3101_S_2014_08_09_pus_uvs.fits wwins J0319+3101_S_2014_08_09_pus_map.win ! wwins: Wrote 2 windows to J0319+3101_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000463754 Jy ! Component: 100 - total flux cleaned = -0.000754149 Jy ! Component: 150 - total flux cleaned = -0.000965143 Jy ! Component: 200 - total flux cleaned = -0.000964784 Jy ! Component: 250 - total flux cleaned = -0.00108176 Jy ! Component: 300 - total flux cleaned = -0.00119463 Jy ! Component: 350 - total flux cleaned = -0.00128625 Jy ! Component: 400 - total flux cleaned = -0.00137545 Jy ! Component: 450 - total flux cleaned = -0.00139336 Jy ! Component: 500 - total flux cleaned = -0.00144435 Jy ! Component: 550 - total flux cleaned = -0.00147741 Jy ! Component: 600 - total flux cleaned = -0.00152574 Jy ! Component: 650 - total flux cleaned = -0.00150974 Jy ! Component: 700 - total flux cleaned = -0.00152486 Jy ! Component: 750 - total flux cleaned = -0.00149468 Jy ! Component: 800 - total flux cleaned = -0.00145027 Jy ! Component: 850 - total flux cleaned = -0.00140694 Jy ! Component: 900 - total flux cleaned = -0.00139274 Jy ! Component: 950 - total flux cleaned = -0.00136462 Jy ! Component: 1000 - total flux cleaned = -0.00135054 Jy ! Component: 1050 - total flux cleaned = -0.001283 Jy ! Component: 1100 - total flux cleaned = -0.00126964 Jy ! Component: 1150 - total flux cleaned = -0.00125649 Jy ! Component: 1200 - total flux cleaned = -0.00117979 Jy ! Component: 1250 - total flux cleaned = -0.00115462 Jy ! Component: 1300 - total flux cleaned = -0.00109294 Jy ! Component: 1350 - total flux cleaned = -0.00109288 Jy ! Component: 1400 - total flux cleaned = -0.00104491 Jy ! Component: 1450 - total flux cleaned = -0.000974189 Jy ! Component: 1500 - total flux cleaned = -0.000962616 Jy ! Component: 1550 - total flux cleaned = -0.000905415 Jy ! Component: 1600 - total flux cleaned = -0.000871463 Jy ! Component: 1650 - total flux cleaned = -0.000804726 Jy ! Component: 1700 - total flux cleaned = -0.000749841 Jy ! Component: 1750 - total flux cleaned = -0.000717288 Jy ! Component: 1800 - total flux cleaned = -0.000663742 Jy ! Component: 1850 - total flux cleaned = -0.000632064 Jy ! Component: 1900 - total flux cleaned = -0.000558957 Jy ! Component: 1950 - total flux cleaned = -0.000517791 Jy ! Component: 2000 - total flux cleaned = -0.000467121 Jy ! Component: 2050 - total flux cleaned = -0.000456911 Jy ! Component: 2100 - total flux cleaned = -0.000407033 Jy ! Component: 2150 - total flux cleaned = -0.000357876 Jy ! Component: 2200 - total flux cleaned = -0.000328777 Jy ! Component: 2250 - total flux cleaned = -0.00029992 Jy ! Component: 2300 - total flux cleaned = -0.000271466 Jy ! Component: 2350 - total flux cleaned = -0.000233796 Jy ! Component: 2400 - total flux cleaned = -0.000233894 Jy ! Component: 2450 - total flux cleaned = -0.000243072 Jy ! Component: 2500 - total flux cleaned = -0.000224627 Jy ! Component: 2550 - total flux cleaned = -0.000215439 Jy ! Component: 2600 - total flux cleaned = -0.000188404 Jy ! Component: 2650 - total flux cleaned = -0.000152875 Jy ! Component: 2700 - total flux cleaned = -0.000108801 Jy ! Component: 2750 - total flux cleaned = -0.000100181 Jy ! Component: 2800 - total flux cleaned = -7.41524e-05 Jy ! Component: 2850 - total flux cleaned = -6.56043e-05 Jy ! Component: 2900 - total flux cleaned = -4.00545e-05 Jy ! Component: 2950 - total flux cleaned = -1.47988e-05 Jy ! Component: 3000 - total flux cleaned = 1.92926e-06 Jy ! Component: 3050 - total flux cleaned = 1.97443e-06 Jy ! Component: 3100 - total flux cleaned = 4.3211e-05 Jy ! Component: 3150 - total flux cleaned = 5.94608e-05 Jy ! Component: 3200 - total flux cleaned = 6.76335e-05 Jy ! Component: 3250 - total flux cleaned = 9.97779e-05 Jy ! Component: 3300 - total flux cleaned = 0.000131712 Jy ! Component: 3350 - total flux cleaned = 0.000147404 Jy ! Component: 3400 - total flux cleaned = 0.000178702 Jy ! Component: 3450 - total flux cleaned = 0.000202007 Jy ! Component: 3500 - total flux cleaned = 0.000225109 Jy ! Component: 3550 - total flux cleaned = 0.000248054 Jy ! Component: 3600 - total flux cleaned = 0.00027845 Jy ! Component: 3650 - total flux cleaned = 0.000293517 Jy ! Component: 3700 - total flux cleaned = 0.000338405 Jy ! Component: 3750 - total flux cleaned = 0.000368129 Jy ! Component: 3800 - total flux cleaned = 0.000390202 Jy ! Component: 3850 - total flux cleaned = 0.000433984 Jy ! Component: 3900 - total flux cleaned = 0.000448468 Jy ! Component: 3950 - total flux cleaned = 0.000491683 Jy ! Component: 4000 - total flux cleaned = 0.000513056 Jy ! Component: 4050 - total flux cleaned = 0.000498823 Jy ! Total flux subtracted in 4096 components = 0.000555319 Jy ! Clean residual min=-0.000516 max=0.000422 Jy/beam ! Clean residual mean=0.000000 rms=0.000133 Jy/beam ! Combined flux in latest and established models = 0.0552261 Jy keep ! Adding 305 model components to the UV plane model. ! The established model now contains 397 components and 0.0552261 Jy ![Exited script file: muppet] wmap "J0319+3101_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.279 x 7.621 at 18.3 degrees (North through East) ! Clean map min=-0.00095936 max=0.045924 Jy/beam ! Writing clean map to FITS file: J0319+3101_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0459243 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000130496 device "J0319+3101_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0319+3101_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.852461 0.852461 1.70492 3.40984 6.81969 13.6394 27.2788 54.5575 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.045 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.279 x 7.621 at 18.3 degrees (North through East) ! Clean map min=-0.00095936 max=0.045924 Jy/beam quit ! Quitting program ! Log file J0319+3101_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 22:53:28 2016