! Started logfile: J0317+5643_S_2014_05_31_pus_uvs.log on Mon Nov 28 14:44:25 2016 obs J0317+5643_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J0317+5643_S_2014_05_31_pus_uva.fits ! AN table 1: 94 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.888416 visibilities/baseline/integration-bin. ! Found source: J0317+5643 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 15032 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0317+5643_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.903142Jy sigma=0.010514 ! Fit after self-cal, rms=0.882634Jy sigma=0.010281 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.494 mas, bmaj=5.264 mas, bpa=49 degrees ! Estimated noise=892.852 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.088025 Jy ! Component: 100 - total flux cleaned = 0.118124 Jy ! Total flux subtracted in 100 components = 0.118124 Jy ! Clean residual min=-0.005899 max=0.012977 Jy/beam ! Clean residual mean=-0.000016 rms=0.001634 Jy/beam ! Combined flux in latest and established models = 0.118124 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.118124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077529Jy sigma=0.000857 ! Fit after self-cal, rms=0.077442Jy sigma=0.000856 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151449 Jy ! Component: 100 - total flux cleaned = 0.0241103 Jy ! Total flux subtracted in 100 components = 0.0241103 Jy ! Clean residual min=-0.003677 max=0.005721 Jy/beam ! Clean residual mean=-0.000009 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 0.142235 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 33 components and 0.142235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073413Jy sigma=0.000807 ! Fit after self-cal, rms=0.073376Jy sigma=0.000807 ! Inverting map ! Added new window around map position (-6, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00679021 Jy ! Component: 100 - total flux cleaned = 0.0114152 Jy ! Total flux subtracted in 100 components = 0.0114152 Jy ! Clean residual min=-0.003181 max=0.003687 Jy/beam ! Clean residual mean=-0.000005 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.15365 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 53 components and 0.15365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072502Jy sigma=0.000798 ! Fit after self-cal, rms=0.072483Jy sigma=0.000797 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.307 mas, bmaj=6.141 mas, bpa=47.62 degrees ! Estimated noise=500.237 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00464059 Jy ! Component: 100 - total flux cleaned = 0.00746489 Jy ! Component: 150 - total flux cleaned = 0.00936045 Jy ! Component: 200 - total flux cleaned = 0.0107126 Jy ! Total flux subtracted in 200 components = 0.0107126 Jy ! Clean residual min=-0.002493 max=0.002193 Jy/beam ! Clean residual mean=-0.000012 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.164362 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 82 components and 0.164362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072085Jy sigma=0.000794 ! Fit after self-cal, rms=0.072082Jy sigma=0.000794 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.86 HN 1.00 KP 1.05 ! LA 1.19 MK 1.02 NL 1.01 OV 0.99 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 1.07 KP 1.01 ! LA 1.15 MK 1.10 NL 1.01 OV 1.03 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.13 HN 1.04 KP 0.92 ! LA 0.90 MK 0.99 NL 1.00 OV 0.92 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 HN 1.02 KP 0.88 ! LA 0.84 MK 1.03 NL 1.05 OV 0.97 ! PT 1.00 SC 0.93 ! ! ! Fit before self-cal, rms=0.072082Jy sigma=0.000794 ! Fit after self-cal, rms=0.069967Jy sigma=0.000776 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.324 mas, bmaj=6.139 mas, bpa=47.5 degrees ! Estimated noise=501.599 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00052739 Jy ! Component: 100 - total flux cleaned = 0.000579842 Jy ! Component: 150 - total flux cleaned = 0.000594885 Jy ! Component: 200 - total flux cleaned = 0.000595154 Jy ! Total flux subtracted in 200 components = 0.000595154 Jy ! Clean residual min=-0.001463 max=0.001462 Jy/beam ! Clean residual mean=-0.000028 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.164958 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 95 components and 0.164958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069958Jy sigma=0.000776 ! Fit after self-cal, rms=0.069954Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069954Jy sigma=0.000776 ! Fit after self-cal, rms=0.070041Jy sigma=0.000775 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.321 mas, bmaj=6.142 mas, bpa=47.52 degrees ! Estimated noise=502.026 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000298478 Jy ! Component: 100 - total flux cleaned = 0.000356463 Jy ! Component: 150 - total flux cleaned = 0.000420482 Jy ! Component: 200 - total flux cleaned = 0.000454561 Jy ! Total flux subtracted in 200 components = 0.000454561 Jy ! Clean residual min=-0.001406 max=0.001526 Jy/beam ! Clean residual mean=-0.000030 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.165412 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 98 components and 0.165412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070035Jy sigma=0.000775 ! Fit after self-cal, rms=0.070037Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, -124.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000709309 Jy ! Component: 100 - total flux cleaned = 0.00108213 Jy ! Component: 150 - total flux cleaned = 0.00140075 Jy ! Component: 200 - total flux cleaned = 0.00168593 Jy ! Total flux subtracted in 200 components = 0.00168593 Jy ! Clean residual min=-0.001245 max=0.001274 Jy/beam ! Clean residual mean=-0.000025 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.167098 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 115 components and 0.167098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070005Jy sigma=0.000775 ! Fit after self-cal, rms=0.070001Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070001Jy sigma=0.000775 ! Fit after self-cal, rms=0.070038Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.319 mas, bmaj=6.141 mas, bpa=47.55 degrees ! Estimated noise=502.163 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000388803 Jy ! Component: 100 - total flux cleaned = 0.000596574 Jy ! Component: 150 - total flux cleaned = 0.00077715 Jy ! Component: 200 - total flux cleaned = 0.000897744 Jy ! Total flux subtracted in 200 components = 0.000897744 Jy ! Clean residual min=-0.001214 max=0.001249 Jy/beam ! Clean residual mean=-0.000023 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.167996 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 119 components and 0.167996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070030Jy sigma=0.000774 ! Fit after self-cal, rms=0.070030Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142307 Jy ! Component: 100 - total flux cleaned = 0.000228297 Jy ! Component: 150 - total flux cleaned = 0.000307725 Jy ! Component: 200 - total flux cleaned = 0.000360678 Jy ! Total flux subtracted in 200 components = 0.000360678 Jy ! Clean residual min=-0.001208 max=0.001237 Jy/beam ! Clean residual mean=-0.000023 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.168356 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 124 components and 0.168356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070026Jy sigma=0.000774 ! Fit after self-cal, rms=0.070026Jy sigma=0.000774 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070026Jy sigma=0.000774 ! Fit after self-cal, rms=0.070064Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.092 mas, bmaj=8.981 mas, bpa=46.48 degrees ! Estimated noise=586.097 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00045857 Jy ! Component: 100 - total flux cleaned = 0.000770034 Jy ! Component: 150 - total flux cleaned = 0.00100035 Jy ! Component: 200 - total flux cleaned = 0.00112127 Jy ! Total flux subtracted in 200 components = 0.00112127 Jy ! Clean residual min=-0.001324 max=0.001433 Jy/beam ! Clean residual mean=-0.000039 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.169478 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 133 components and 0.169478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070062Jy sigma=0.000774 ! Fit after self-cal, rms=0.070063Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.4923e-05 Jy ! Component: 100 - total flux cleaned = 0.000165306 Jy ! Component: 150 - total flux cleaned = 0.000200345 Jy ! Component: 200 - total flux cleaned = 0.000238486 Jy ! Total flux subtracted in 200 components = 0.000238486 Jy ! Clean residual min=-0.001313 max=0.001424 Jy/beam ! Clean residual mean=-0.000039 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.169716 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 139 components and 0.169716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070062Jy sigma=0.000774 ! Fit after self-cal, rms=0.070062Jy sigma=0.000774 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.317 mas, bmaj=6.139 mas, bpa=47.56 degrees ! Estimated noise=502.468 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.317 x 6.139 at 47.56 degrees (North through East) ! Clean map min=-0.001161 max=0.11647 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.487 mas, bmaj=5.275 mas, bpa=49.01 degrees ! Estimated noise=889.759 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0876129 Jy ! Component: 100 - total flux cleaned = 0.118191 Jy ! Component: 150 - total flux cleaned = 0.133561 Jy ! Component: 200 - total flux cleaned = 0.142493 Jy ! Total flux subtracted in 200 components = 0.142493 Jy ! Clean residual min=-0.003560 max=0.004719 Jy/beam ! Clean residual mean=-0.000022 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.142493 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.142493 Jy ! Inverting map and beam ! Estimated beam: bmin=4.317 mas, bmaj=6.139 mas, bpa=47.56 degrees ! Estimated noise=502.468 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00849602 Jy ! Component: 100 - total flux cleaned = 0.0134568 Jy ! Component: 150 - total flux cleaned = 0.0165854 Jy ! Component: 200 - total flux cleaned = 0.0187798 Jy ! Total flux subtracted in 200 components = 0.0187798 Jy ! Clean residual min=-0.001482 max=0.001577 Jy/beam ! Clean residual mean=-0.000035 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.161272 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 75 components and 0.161272 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.092 mas, bmaj=8.981 mas, bpa=46.48 degrees ! Estimated noise=586.097 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235072 Jy ! Component: 100 - total flux cleaned = 0.00384048 Jy ! Component: 150 - total flux cleaned = 0.00495226 Jy ! Component: 200 - total flux cleaned = 0.00580883 Jy ! Total flux subtracted in 200 components = 0.00580883 Jy ! Clean residual min=-0.001631 max=0.001430 Jy/beam ! Clean residual mean=-0.000048 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.167081 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000571668 Jy ! Component: 100 - total flux cleaned = 0.000909679 Jy ! Component: 150 - total flux cleaned = 0.00118103 Jy ! Component: 200 - total flux cleaned = 0.00141626 Jy ! Total flux subtracted in 200 components = 0.00141626 Jy ! Clean residual min=-0.001617 max=0.001434 Jy/beam ! Clean residual mean=-0.000042 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.168497 Jy ! Adding 88 model components to the UV plane model. ! The established model now contains 157 components and 0.168497 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.317 mas, bmaj=6.139 mas, bpa=47.56 degrees ! Estimated noise=502.468 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000139588 Jy ! Component: 100 - total flux cleaned = 2.20277e-05 Jy ! Component: 150 - total flux cleaned = 0.00020426 Jy ! Component: 200 - total flux cleaned = 0.00030396 Jy ! Total flux subtracted in 200 components = 0.00030396 Jy ! Clean residual min=-0.001294 max=0.001302 Jy/beam ! Clean residual mean=-0.000021 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.168801 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 172 components and 0.168801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070075Jy sigma=0.000775 ! Fit after self-cal, rms=0.070073Jy sigma=0.000775 wmodel J0317+5643_S_2014_05_31_pus_map.mod ! Writing 172 model components to file: J0317+5643_S_2014_05_31_pus_map.mod wobs J0317+5643_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J0317+5643_S_2014_05_31_pus_uvs.fits wwins J0317+5643_S_2014_05_31_pus_map.win ! wwins: Wrote 3 windows to J0317+5643_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000137903 Jy ! Component: 100 - total flux cleaned = -0.000333962 Jy ! Component: 150 - total flux cleaned = -0.000519937 Jy ! Component: 200 - total flux cleaned = -0.000619375 Jy ! Component: 250 - total flux cleaned = -0.000657898 Jy ! Component: 300 - total flux cleaned = -0.000752751 Jy ! Component: 350 - total flux cleaned = -0.000771249 Jy ! Component: 400 - total flux cleaned = -0.000807956 Jy ! Component: 450 - total flux cleaned = -0.000843706 Jy ! Component: 500 - total flux cleaned = -0.000896513 Jy ! Component: 550 - total flux cleaned = -0.000896676 Jy ! Component: 600 - total flux cleaned = -0.000981817 Jy ! Component: 650 - total flux cleaned = -0.00103197 Jy ! Component: 700 - total flux cleaned = -0.00106483 Jy ! Component: 750 - total flux cleaned = -0.00108111 Jy ! Component: 800 - total flux cleaned = -0.00117742 Jy ! Component: 850 - total flux cleaned = -0.00120914 Jy ! Component: 900 - total flux cleaned = -0.00127148 Jy ! Component: 950 - total flux cleaned = -0.00137906 Jy ! Component: 1000 - total flux cleaned = -0.00139439 Jy ! Component: 1050 - total flux cleaned = -0.001454 Jy ! Component: 1100 - total flux cleaned = -0.0014393 Jy ! Component: 1150 - total flux cleaned = -0.00145417 Jy ! Component: 1200 - total flux cleaned = -0.00149761 Jy ! Component: 1250 - total flux cleaned = -0.00148338 Jy ! Component: 1300 - total flux cleaned = -0.00152573 Jy ! Component: 1350 - total flux cleaned = -0.00156751 Jy ! Component: 1400 - total flux cleaned = -0.00159498 Jy ! Component: 1450 - total flux cleaned = -0.00158148 Jy ! Component: 1500 - total flux cleaned = -0.00166231 Jy ! Component: 1550 - total flux cleaned = -0.00170199 Jy ! Component: 1600 - total flux cleaned = -0.00172834 Jy ! Component: 1650 - total flux cleaned = -0.00174144 Jy ! Component: 1700 - total flux cleaned = -0.00183178 Jy ! Component: 1750 - total flux cleaned = -0.0018444 Jy ! Component: 1800 - total flux cleaned = -0.00189501 Jy ! Component: 1850 - total flux cleaned = -0.00193251 Jy ! Component: 1900 - total flux cleaned = -0.00198223 Jy ! Component: 1950 - total flux cleaned = -0.00199474 Jy ! Component: 2000 - total flux cleaned = -0.0020437 Jy ! Component: 2050 - total flux cleaned = -0.00203156 Jy ! Component: 2100 - total flux cleaned = -0.00207961 Jy ! Component: 2150 - total flux cleaned = -0.00205589 Jy ! Component: 2200 - total flux cleaned = -0.00207951 Jy ! Component: 2250 - total flux cleaned = -0.00209118 Jy ! Component: 2300 - total flux cleaned = -0.00210261 Jy ! Component: 2350 - total flux cleaned = -0.00210263 Jy ! Component: 2400 - total flux cleaned = -0.00212534 Jy ! Component: 2450 - total flux cleaned = -0.00212526 Jy ! Component: 2500 - total flux cleaned = -0.00212514 Jy ! Component: 2550 - total flux cleaned = -0.00211395 Jy ! Component: 2600 - total flux cleaned = -0.002125 Jy ! Component: 2650 - total flux cleaned = -0.00212494 Jy ! Component: 2700 - total flux cleaned = -0.00217938 Jy ! Component: 2750 - total flux cleaned = -0.00217946 Jy ! Component: 2800 - total flux cleaned = -0.0022116 Jy ! Component: 2850 - total flux cleaned = -0.00226484 Jy ! Component: 2900 - total flux cleaned = -0.00224364 Jy ! Component: 2950 - total flux cleaned = -0.00225419 Jy ! Component: 3000 - total flux cleaned = -0.00227518 Jy ! Component: 3050 - total flux cleaned = -0.00230617 Jy ! Component: 3100 - total flux cleaned = -0.00227535 Jy ! Component: 3150 - total flux cleaned = -0.002306 Jy ! Component: 3200 - total flux cleaned = -0.00231606 Jy ! Component: 3250 - total flux cleaned = -0.00227584 Jy ! Component: 3300 - total flux cleaned = -0.00231584 Jy ! Component: 3350 - total flux cleaned = -0.00228614 Jy ! Component: 3400 - total flux cleaned = -0.00229601 Jy ! Component: 3450 - total flux cleaned = -0.00230586 Jy ! Component: 3500 - total flux cleaned = -0.00228643 Jy ! Component: 3550 - total flux cleaned = -0.00231546 Jy ! Component: 3600 - total flux cleaned = -0.00231534 Jy ! Component: 3650 - total flux cleaned = -0.00231529 Jy ! Component: 3700 - total flux cleaned = -0.00231528 Jy ! Component: 3750 - total flux cleaned = -0.00229646 Jy ! Component: 3800 - total flux cleaned = -0.00227777 Jy ! Component: 3850 - total flux cleaned = -0.00229639 Jy ! Component: 3900 - total flux cleaned = -0.00228713 Jy ! Component: 3950 - total flux cleaned = -0.00228709 Jy ! Component: 4000 - total flux cleaned = -0.00230535 Jy ! Component: 4050 - total flux cleaned = -0.00229631 Jy ! Total flux subtracted in 4096 components = -0.00228721 Jy ! Clean residual min=-0.000545 max=0.000508 Jy/beam ! Clean residual mean=-0.000006 rms=0.000162 Jy/beam ! Combined flux in latest and established models = 0.166514 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 431 components and 0.166514 Jy ![Exited script file: muppet] wmap "J0317+5643_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.317 x 6.139 at 47.56 degrees (North through East) ! Clean map min=-0.00099801 max=0.11659 Jy/beam ! Writing clean map to FITS file: J0317+5643_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.116591 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000160738 device "J0317+5643_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J0317+5643_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.413597 0.413597 0.827193 1.65439 3.30877 6.61754 13.2351 26.4702 52.9404 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.116 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.317 x 6.139 at 47.56 degrees (North through East) ! Clean map min=-0.00099801 max=0.11659 Jy/beam quit ! Quitting program ! Log file J0317+5643_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 14:44:31 2016