! Started logfile: J0313+4120_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:13:16 2016 obs J0313+4120_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J0313+4120_S_2014_08_05_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.572222 visibilities/baseline/integration-bin. ! Found source: J0313+4120 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 1648 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0313+4120_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.808283Jy sigma=0.008325 ! Fit after self-cal, rms=0.803735Jy sigma=0.008278 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.135 mas, bmaj=12.43 mas, bpa=80.47 degrees ! Estimated noise=1974.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.151596 Jy ! Component: 100 - total flux cleaned = 0.1869 Jy ! Total flux subtracted in 100 components = 0.1869 Jy ! Clean residual min=-0.008735 max=0.014437 Jy/beam ! Clean residual mean=0.000007 rms=0.003261 Jy/beam ! Combined flux in latest and established models = 0.1869 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.1869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096052Jy sigma=0.000855 ! Fit after self-cal, rms=0.096038Jy sigma=0.000855 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.757 mas, bmaj=13.31 mas, bpa=80.96 degrees ! Estimated noise=1735.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.019877 Jy ! Component: 100 - total flux cleaned = 0.0296768 Jy ! Component: 150 - total flux cleaned = 0.035282 Jy ! Component: 200 - total flux cleaned = 0.0390138 Jy ! Total flux subtracted in 200 components = 0.0390138 Jy ! Clean residual min=-0.005854 max=0.006708 Jy/beam ! Clean residual mean=0.000076 rms=0.001824 Jy/beam ! Combined flux in latest and established models = 0.225914 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 56 components and 0.225914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091250Jy sigma=0.000817 ! Fit after self-cal, rms=0.091200Jy sigma=0.000816 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.88 HN 0.97 KP 1.07 ! LA 1.16 MK 1.00* NL 0.98 OV 0.97 ! PT 0.99 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 1.07 KP 1.01 ! LA 1.07 MK 1.00* NL 1.00 OV 1.01 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.06 HN 1.03 KP 0.91 ! LA 0.94 MK 1.00* NL 1.01 OV 0.95 ! PT 1.03 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.79 HN 1.04 KP 0.86 ! LA 0.80 MK 1.00* NL 1.08 OV 1.02 ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.091200Jy sigma=0.000816 ! Fit after self-cal, rms=0.082442Jy sigma=0.000786 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.803 mas, bmaj=13.33 mas, bpa=80.61 degrees ! Estimated noise=1718.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109867 Jy ! Component: 100 - total flux cleaned = 0.000164553 Jy ! Component: 150 - total flux cleaned = 0.000130381 Jy ! Component: 200 - total flux cleaned = 7.0859e-05 Jy ! Total flux subtracted in 200 components = 7.0859e-05 Jy ! Clean residual min=-0.004691 max=0.006944 Jy/beam ! Clean residual mean=0.000052 rms=0.001376 Jy/beam ! Combined flux in latest and established models = 0.225985 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 69 components and 0.225985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082397Jy sigma=0.000786 ! Fit after self-cal, rms=0.082330Jy sigma=0.000786 ! Inverting map ! Added new window around map position (-100.5, 87). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00600982 Jy ! Component: 100 - total flux cleaned = 0.00871861 Jy ! Component: 150 - total flux cleaned = 0.00977179 Jy ! Component: 200 - total flux cleaned = 0.0108048 Jy ! Total flux subtracted in 200 components = 0.0108048 Jy ! Clean residual min=-0.003624 max=0.003640 Jy/beam ! Clean residual mean=0.000037 rms=0.000959 Jy/beam ! Combined flux in latest and established models = 0.23679 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 116 components and 0.23679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081854Jy sigma=0.000781 ! Fit after self-cal, rms=0.081828Jy sigma=0.000781 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081828Jy sigma=0.000781 ! Fit after self-cal, rms=0.081594Jy sigma=0.000781 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.819 mas, bmaj=13.3 mas, bpa=80.53 degrees ! Estimated noise=1713.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165712 Jy ! Component: 100 - total flux cleaned = 0.00244226 Jy ! Component: 150 - total flux cleaned = 0.00316287 Jy ! Component: 200 - total flux cleaned = 0.00342169 Jy ! Total flux subtracted in 200 components = 0.00342169 Jy ! Clean residual min=-0.003213 max=0.003414 Jy/beam ! Clean residual mean=0.000022 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.240211 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 148 components and 0.240212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081522Jy sigma=0.000780 ! Fit after self-cal, rms=0.081520Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103022 Jy ! Component: 100 - total flux cleaned = 0.00142921 Jy ! Component: 150 - total flux cleaned = 0.0015491 Jy ! Component: 200 - total flux cleaned = 0.00160541 Jy ! Total flux subtracted in 200 components = 0.00160541 Jy ! Clean residual min=-0.003034 max=0.003282 Jy/beam ! Clean residual mean=0.000015 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 0.241817 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 174 components and 0.241817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081493Jy sigma=0.000780 ! Fit after self-cal, rms=0.081491Jy sigma=0.000780 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081491Jy sigma=0.000780 ! Fit after self-cal, rms=0.081547Jy sigma=0.000780 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.828 mas, bmaj=13.29 mas, bpa=80.48 degrees ! Estimated noise=1712.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000351692 Jy ! Component: 100 - total flux cleaned = 0.000705337 Jy ! Component: 150 - total flux cleaned = 0.000914163 Jy ! Component: 200 - total flux cleaned = 0.000986336 Jy ! Total flux subtracted in 200 components = 0.000986336 Jy ! Clean residual min=-0.003021 max=0.003173 Jy/beam ! Clean residual mean=0.000015 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.242803 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 191 components and 0.242803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081527Jy sigma=0.000779 ! Fit after self-cal, rms=0.081528Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000496928 Jy ! Component: 100 - total flux cleaned = 0.000661449 Jy ! Component: 150 - total flux cleaned = 0.000726442 Jy ! Component: 200 - total flux cleaned = 0.000747064 Jy ! Total flux subtracted in 200 components = 0.000747064 Jy ! Clean residual min=-0.003044 max=0.003126 Jy/beam ! Clean residual mean=0.000012 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.24355 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 210 components and 0.24355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081516Jy sigma=0.000779 ! Fit after self-cal, rms=0.081515Jy sigma=0.000779 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081515Jy sigma=0.000779 ! Fit after self-cal, rms=0.081564Jy sigma=0.000779 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.879 mas, bmaj=13.76 mas, bpa=76.09 degrees ! Estimated noise=1789.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.51401e-05 Jy ! Component: 100 - total flux cleaned = 0.000187673 Jy ! Component: 150 - total flux cleaned = 0.000308201 Jy ! Component: 200 - total flux cleaned = 0.000370631 Jy ! Total flux subtracted in 200 components = 0.000370631 Jy ! Clean residual min=-0.002559 max=0.002790 Jy/beam ! Clean residual mean=0.000014 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.243921 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 241 components and 0.243921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081559Jy sigma=0.000779 ! Fit after self-cal, rms=0.081561Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127591 Jy ! Component: 100 - total flux cleaned = 0.000169992 Jy ! Component: 150 - total flux cleaned = 0.000197032 Jy ! Component: 200 - total flux cleaned = 0.000223101 Jy ! Total flux subtracted in 200 components = 0.000223101 Jy ! Clean residual min=-0.002594 max=0.002797 Jy/beam ! Clean residual mean=0.000012 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.244144 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 256 components and 0.244144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081557Jy sigma=0.000779 ! Fit after self-cal, rms=0.081556Jy sigma=0.000779 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.834 mas, bmaj=13.28 mas, bpa=80.43 degrees ! Estimated noise=1712.96 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.834 x 13.28 at 80.43 degrees (North through East) ! Clean map min=-0.0030659 max=0.19847 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.202 mas, bmaj=12.4 mas, bpa=79.8 degrees ! Estimated noise=1950.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.149627 Jy ! Component: 100 - total flux cleaned = 0.184492 Jy ! Component: 150 - total flux cleaned = 0.200615 Jy ! Component: 200 - total flux cleaned = 0.209666 Jy ! Total flux subtracted in 200 components = 0.209666 Jy ! Clean residual min=-0.005059 max=0.005170 Jy/beam ! Clean residual mean=0.000023 rms=0.001596 Jy/beam ! Combined flux in latest and established models = 0.209666 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.209666 Jy ! Inverting map and beam ! Estimated beam: bmin=6.834 mas, bmaj=13.28 mas, bpa=80.43 degrees ! Estimated noise=1712.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00829922 Jy ! Component: 100 - total flux cleaned = 0.0140085 Jy ! Component: 150 - total flux cleaned = 0.0182016 Jy ! Component: 200 - total flux cleaned = 0.021419 Jy ! Total flux subtracted in 200 components = 0.021419 Jy ! Clean residual min=-0.003926 max=0.003621 Jy/beam ! Clean residual mean=0.000040 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.231085 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 81 components and 0.231085 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.879 mas, bmaj=13.76 mas, bpa=76.09 degrees ! Estimated noise=1789.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307959 Jy ! Component: 100 - total flux cleaned = 0.00539201 Jy ! Component: 150 - total flux cleaned = 0.00719313 Jy ! Component: 200 - total flux cleaned = 0.00864903 Jy ! Total flux subtracted in 200 components = 0.00864903 Jy ! Clean residual min=-0.003106 max=0.002484 Jy/beam ! Clean residual mean=0.000028 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.239734 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118779 Jy ! Component: 100 - total flux cleaned = 0.00186781 Jy ! Component: 150 - total flux cleaned = 0.00228029 Jy ! Component: 200 - total flux cleaned = 0.00258409 Jy ! Total flux subtracted in 200 components = 0.00258409 Jy ! Clean residual min=-0.002752 max=0.002515 Jy/beam ! Clean residual mean=0.000026 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.242318 Jy ! Adding 112 model components to the UV plane model. ! The established model now contains 187 components and 0.242318 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.834 mas, bmaj=13.28 mas, bpa=80.43 degrees ! Estimated noise=1712.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000257503 Jy ! Component: 100 - total flux cleaned = 0.000477001 Jy ! Component: 150 - total flux cleaned = 0.000643814 Jy ! Component: 200 - total flux cleaned = 0.000745748 Jy ! Total flux subtracted in 200 components = 0.000745748 Jy ! Clean residual min=-0.002942 max=0.002910 Jy/beam ! Clean residual mean=0.000011 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.243064 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 211 components and 0.243064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081578Jy sigma=0.000779 ! Fit after self-cal, rms=0.081575Jy sigma=0.000779 wmodel J0313+4120_S_2014_08_05_pus_map.mod ! Writing 211 model components to file: J0313+4120_S_2014_08_05_pus_map.mod wobs J0313+4120_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J0313+4120_S_2014_08_05_pus_uvs.fits wwins J0313+4120_S_2014_08_05_pus_map.win ! wwins: Wrote 2 windows to J0313+4120_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000427056 Jy ! Component: 100 - total flux cleaned = -0.000471827 Jy ! Component: 150 - total flux cleaned = -0.000426797 Jy ! Component: 200 - total flux cleaned = -0.000257928 Jy ! Component: 250 - total flux cleaned = -0.000415957 Jy ! Component: 300 - total flux cleaned = -0.000490894 Jy ! Component: 350 - total flux cleaned = -0.000637377 Jy ! Component: 400 - total flux cleaned = -0.000779231 Jy ! Component: 450 - total flux cleaned = -0.00108413 Jy ! Component: 500 - total flux cleaned = -0.00118277 Jy ! Component: 550 - total flux cleaned = -0.0013736 Jy ! Component: 600 - total flux cleaned = -0.00146572 Jy ! Component: 650 - total flux cleaned = -0.00161562 Jy ! Component: 700 - total flux cleaned = -0.00184826 Jy ! Component: 750 - total flux cleaned = -0.00204789 Jy ! Component: 800 - total flux cleaned = -0.0021873 Jy ! Component: 850 - total flux cleaned = -0.00229639 Jy ! Component: 900 - total flux cleaned = -0.00245632 Jy ! Component: 950 - total flux cleaned = -0.00248257 Jy ! Component: 1000 - total flux cleaned = -0.0026375 Jy ! Component: 1050 - total flux cleaned = -0.00276452 Jy ! Component: 1100 - total flux cleaned = -0.00291412 Jy ! Component: 1150 - total flux cleaned = -0.00301247 Jy ! Component: 1200 - total flux cleaned = -0.00315809 Jy ! Component: 1250 - total flux cleaned = -0.00330147 Jy ! Component: 1300 - total flux cleaned = -0.00344307 Jy ! Component: 1350 - total flux cleaned = -0.00365274 Jy ! Component: 1400 - total flux cleaned = -0.00381376 Jy ! Component: 1450 - total flux cleaned = -0.0040184 Jy ! Component: 1500 - total flux cleaned = -0.00419837 Jy ! Component: 1550 - total flux cleaned = -0.00439872 Jy ! Component: 1600 - total flux cleaned = -0.00459664 Jy ! Component: 1650 - total flux cleaned = -0.00474924 Jy ! Component: 1700 - total flux cleaned = -0.00494342 Jy ! Component: 1750 - total flux cleaned = -0.00511403 Jy ! Component: 1800 - total flux cleaned = -0.00526185 Jy ! Component: 1850 - total flux cleaned = -0.00540838 Jy ! Component: 1900 - total flux cleaned = -0.00557398 Jy ! Component: 1950 - total flux cleaned = -0.00571749 Jy ! Component: 2000 - total flux cleaned = -0.00588021 Jy ! Component: 2050 - total flux cleaned = -0.00600123 Jy ! Component: 2100 - total flux cleaned = -0.00614136 Jy ! Component: 2150 - total flux cleaned = -0.00632017 Jy ! Component: 2200 - total flux cleaned = -0.00645808 Jy ! Component: 2250 - total flux cleaned = -0.00661458 Jy ! Component: 2300 - total flux cleaned = -0.00675049 Jy ! Component: 2350 - total flux cleaned = -0.00690476 Jy ! Component: 2400 - total flux cleaned = -0.00705799 Jy ! Component: 2450 - total flux cleaned = -0.00719127 Jy ! Component: 2500 - total flux cleaned = -0.00730502 Jy ! Component: 2550 - total flux cleaned = -0.00743734 Jy ! Component: 2600 - total flux cleaned = -0.00747494 Jy ! Component: 2650 - total flux cleaned = -0.0075125 Jy ! Component: 2700 - total flux cleaned = -0.0075875 Jy ! Component: 2750 - total flux cleaned = -0.0076436 Jy ! Component: 2800 - total flux cleaned = -0.00768097 Jy ! Component: 2850 - total flux cleaned = -0.00766232 Jy ! Component: 2900 - total flux cleaned = -0.00768111 Jy ! Component: 2950 - total flux cleaned = -0.00773715 Jy ! Component: 3000 - total flux cleaned = -0.00775569 Jy ! Component: 3050 - total flux cleaned = -0.00775564 Jy ! Component: 3100 - total flux cleaned = -0.00775561 Jy ! Component: 3150 - total flux cleaned = -0.00771811 Jy ! Component: 3200 - total flux cleaned = -0.00771812 Jy ! Component: 3250 - total flux cleaned = -0.00769927 Jy ! Component: 3300 - total flux cleaned = -0.0076803 Jy ! Component: 3350 - total flux cleaned = -0.00766138 Jy ! Component: 3400 - total flux cleaned = -0.00766133 Jy ! Component: 3450 - total flux cleaned = -0.00769914 Jy ! Component: 3500 - total flux cleaned = -0.00766121 Jy ! Component: 3550 - total flux cleaned = -0.00758523 Jy ! Component: 3600 - total flux cleaned = -0.00754708 Jy ! Component: 3650 - total flux cleaned = -0.00752794 Jy ! Component: 3700 - total flux cleaned = -0.00745115 Jy ! Component: 3750 - total flux cleaned = -0.0073935 Jy ! Component: 3800 - total flux cleaned = -0.00733537 Jy ! Component: 3850 - total flux cleaned = -0.0073353 Jy ! Component: 3900 - total flux cleaned = -0.00725732 Jy ! Component: 3950 - total flux cleaned = -0.00721818 Jy ! Component: 4000 - total flux cleaned = -0.00715921 Jy ! Component: 4050 - total flux cleaned = -0.00710012 Jy ! Total flux subtracted in 4096 components = -0.0070802 Jy ! Clean residual min=-0.001368 max=0.001347 Jy/beam ! Clean residual mean=0.000006 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.235984 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 456 components and 0.235984 Jy ![Exited script file: muppet] wmap "J0313+4120_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.834 x 13.28 at 80.43 degrees (North through East) ! Clean map min=-0.0034226 max=0.19817 Jy/beam ! Writing clean map to FITS file: J0313+4120_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.198167 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000385198 device "J0313+4120_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0313+4120_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.58314 0.58314 1.16628 2.33256 4.66512 9.33025 18.6605 37.321 74.642 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.198 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.834 x 13.28 at 80.43 degrees (North through East) ! Clean map min=-0.0034226 max=0.19817 Jy/beam quit ! Quitting program ! Log file J0313+4120_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:13:22 2016