! Started logfile: J0313+0228_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:15:34 2017 obs J0313+0228_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0313+0228_S_2014_01_04_pus_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0313+0228 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5040 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0313+0228_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.979129Jy sigma=0.014139 ! Fit after self-cal, rms=0.949064Jy sigma=0.013644 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.263 mas, bmaj=5.941 mas, bpa=-0.4248 degrees ! Estimated noise=926.185 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0420645 Jy ! Component: 100 - total flux cleaned = 0.0517984 Jy ! Total flux subtracted in 100 components = 0.0517984 Jy ! Clean residual min=-0.004111 max=0.004819 Jy/beam ! Clean residual mean=-0.000012 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 0.0517984 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0517984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076864Jy sigma=0.000877 ! Fit after self-cal, rms=0.076211Jy sigma=0.000870 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.702 mas, bmaj=6.508 mas, bpa=1.134 degrees ! Estimated noise=747.602 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00512879 Jy ! Component: 100 - total flux cleaned = 0.00766151 Jy ! Component: 150 - total flux cleaned = 0.00929738 Jy ! Component: 200 - total flux cleaned = 0.0103594 Jy ! Total flux subtracted in 200 components = 0.0103594 Jy ! Clean residual min=-0.003009 max=0.003549 Jy/beam ! Clean residual mean=-0.000011 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.0621578 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 29 components and 0.0621577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075882Jy sigma=0.000865 ! Fit after self-cal, rms=0.075957Jy sigma=0.000864 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* KP 1.00* LA 1.00 ! MK 1.04 NL 1.01 OV 0.97 PT 1.05 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* KP 1.00* LA 1.01 ! MK 0.99 NL 1.05 OV 1.02 PT 0.97 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* KP 1.00* LA 0.89 ! MK 0.95 NL 1.02 OV 0.95 PT 1.07 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* KP 1.00* LA 0.95 ! MK 0.98 NL 1.10 OV 1.09 PT 1.04 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.075957Jy sigma=0.000864 ! Fit after self-cal, rms=0.075872Jy sigma=0.000863 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.692 mas, bmaj=6.479 mas, bpa=1.241 degrees ! Estimated noise=748.375 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101 Jy ! Component: 100 - total flux cleaned = 0.00129444 Jy ! Component: 150 - total flux cleaned = 0.00150933 Jy ! Component: 200 - total flux cleaned = 0.0016511 Jy ! Total flux subtracted in 200 components = 0.0016511 Jy ! Clean residual min=-0.003032 max=0.003686 Jy/beam ! Clean residual mean=-0.000008 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.0638089 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.0638089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075829Jy sigma=0.000862 ! Fit after self-cal, rms=0.076054Jy sigma=0.000862 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076054Jy sigma=0.000862 ! Fit after self-cal, rms=0.076405Jy sigma=0.000858 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.672 mas, bmaj=6.453 mas, bpa=1.725 degrees ! Estimated noise=749.337 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123008 Jy ! Component: 100 - total flux cleaned = 0.00144673 Jy ! Component: 150 - total flux cleaned = 0.00155491 Jy ! Component: 200 - total flux cleaned = 0.00165357 Jy ! Total flux subtracted in 200 components = 0.00165357 Jy ! Clean residual min=-0.002276 max=0.002833 Jy/beam ! Clean residual mean=-0.000005 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.0654624 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.0654624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076351Jy sigma=0.000857 ! Fit after self-cal, rms=0.076585Jy sigma=0.000857 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20, 11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225554 Jy ! Component: 100 - total flux cleaned = 0.00269456 Jy ! Component: 150 - total flux cleaned = 0.00321672 Jy ! Component: 200 - total flux cleaned = 0.00339481 Jy ! Total flux subtracted in 200 components = 0.00339481 Jy ! Clean residual min=-0.002186 max=0.002233 Jy/beam ! Clean residual mean=0.000000 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.0688572 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 61 components and 0.0688572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076469Jy sigma=0.000855 ! Fit after self-cal, rms=0.076600Jy sigma=0.000855 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076600Jy sigma=0.000855 ! Fit after self-cal, rms=0.077316Jy sigma=0.000855 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.687 mas, bmaj=6.458 mas, bpa=2.632 degrees ! Estimated noise=752.388 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146676 Jy ! Component: 100 - total flux cleaned = 0.00165428 Jy ! Component: 150 - total flux cleaned = 0.00180278 Jy ! Component: 200 - total flux cleaned = 0.00183447 Jy ! Total flux subtracted in 200 components = 0.00183447 Jy ! Clean residual min=-0.002077 max=0.002127 Jy/beam ! Clean residual mean=-0.000001 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.0706917 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 72 components and 0.0706917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077244Jy sigma=0.000854 ! Fit after self-cal, rms=0.077424Jy sigma=0.000854 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-25, 33.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147082 Jy ! Component: 100 - total flux cleaned = 0.00158315 Jy ! Component: 150 - total flux cleaned = 0.00182065 Jy ! Component: 200 - total flux cleaned = 0.00207014 Jy ! Total flux subtracted in 200 components = 0.00207014 Jy ! Clean residual min=-0.002006 max=0.001986 Jy/beam ! Clean residual mean=0.000001 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.0727619 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 92 components and 0.0727619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077310Jy sigma=0.000852 ! Fit after self-cal, rms=0.077366Jy sigma=0.000852 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077366Jy sigma=0.000852 ! Fit after self-cal, rms=0.078212Jy sigma=0.000852 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.676 mas, bmaj=10.7 mas, bpa=10.3 degrees ! Estimated noise=880.429 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00076081 Jy ! Component: 100 - total flux cleaned = 0.00099161 Jy ! Component: 150 - total flux cleaned = 0.00111028 Jy ! Component: 200 - total flux cleaned = 0.00124697 Jy ! Total flux subtracted in 200 components = 0.00124697 Jy ! Clean residual min=-0.001472 max=0.001277 Jy/beam ! Clean residual mean=0.000000 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.0740088 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 109 components and 0.0740088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078195Jy sigma=0.000852 ! Fit after self-cal, rms=0.078332Jy sigma=0.000852 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.90887e-05 Jy ! Component: 100 - total flux cleaned = 0.000123743 Jy ! Component: 150 - total flux cleaned = 0.000108715 Jy ! Component: 200 - total flux cleaned = 0.000109293 Jy ! Total flux subtracted in 200 components = 0.000109293 Jy ! Clean residual min=-0.001522 max=0.001307 Jy/beam ! Clean residual mean=0.000001 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.0741181 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 124 components and 0.0741181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078323Jy sigma=0.000852 ! Fit after self-cal, rms=0.078342Jy sigma=0.000852 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.707 mas, bmaj=6.471 mas, bpa=3.185 degrees ! Estimated noise=755.656 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.707 x 6.471 at 3.185 degrees (North through East) ! Clean map min=-0.0019719 max=0.05294 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.264 mas, bmaj=5.879 mas, bpa=1.618 degrees ! Estimated noise=939.139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0422191 Jy ! Component: 100 - total flux cleaned = 0.0527548 Jy ! Component: 150 - total flux cleaned = 0.0586973 Jy ! Component: 200 - total flux cleaned = 0.0621457 Jy ! Total flux subtracted in 200 components = 0.0621457 Jy ! Clean residual min=-0.004029 max=0.003490 Jy/beam ! Clean residual mean=-0.000008 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.0621457 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0621457 Jy ! Inverting map and beam ! Estimated beam: bmin=3.707 mas, bmaj=6.471 mas, bpa=3.185 degrees ! Estimated noise=755.656 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00399439 Jy ! Component: 100 - total flux cleaned = 0.00680814 Jy ! Component: 150 - total flux cleaned = 0.00781556 Jy ! Component: 200 - total flux cleaned = 0.00828726 Jy ! Total flux subtracted in 200 components = 0.00828726 Jy ! Clean residual min=-0.002586 max=0.002321 Jy/beam ! Clean residual mean=-0.000005 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.0704329 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 49 components and 0.0704329 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.676 mas, bmaj=10.7 mas, bpa=10.3 degrees ! Estimated noise=880.429 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164925 Jy ! Component: 100 - total flux cleaned = 0.00260404 Jy ! Component: 150 - total flux cleaned = 0.00297649 Jy ! Component: 200 - total flux cleaned = 0.00299943 Jy ! Total flux subtracted in 200 components = 0.00299943 Jy ! Clean residual min=-0.001631 max=0.001392 Jy/beam ! Clean residual mean=-0.000002 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.0734324 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.24116e-05 Jy ! Component: 100 - total flux cleaned = -2.16622e-05 Jy ! Component: 150 - total flux cleaned = -2.14987e-05 Jy ! Component: 200 - total flux cleaned = -3.60529e-06 Jy ! Total flux subtracted in 200 components = -3.60529e-06 Jy ! Clean residual min=-0.001543 max=0.001355 Jy/beam ! Clean residual mean=-0.000002 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.0734288 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 88 components and 0.0734288 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.707 mas, bmaj=6.471 mas, bpa=3.185 degrees ! Estimated noise=755.656 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000257822 Jy ! Component: 100 - total flux cleaned = -0.000318651 Jy ! Component: 150 - total flux cleaned = -0.000273065 Jy ! Component: 200 - total flux cleaned = -0.000231739 Jy ! Total flux subtracted in 200 components = -0.000231739 Jy ! Clean residual min=-0.002093 max=0.002077 Jy/beam ! Clean residual mean=-0.000001 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.073197 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 97 components and 0.073197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078324Jy sigma=0.000852 ! Fit after self-cal, rms=0.078324Jy sigma=0.000851 wmodel J0313+0228_S_2014_01_04_pus_map.mod ! Writing 97 model components to file: J0313+0228_S_2014_01_04_pus_map.mod wobs J0313+0228_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0313+0228_S_2014_01_04_pus_uvs.fits wwins J0313+0228_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0313+0228_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000271343 Jy ! Component: 100 - total flux cleaned = -0.000272617 Jy ! Component: 150 - total flux cleaned = -0.000401017 Jy ! Component: 200 - total flux cleaned = -0.000585613 Jy ! Component: 250 - total flux cleaned = -0.000881465 Jy ! Component: 300 - total flux cleaned = -0.00102335 Jy ! Component: 350 - total flux cleaned = -0.0011338 Jy ! Component: 400 - total flux cleaned = -0.00126808 Jy ! Component: 450 - total flux cleaned = -0.00134689 Jy ! Component: 500 - total flux cleaned = -0.00134707 Jy ! Component: 550 - total flux cleaned = -0.00142207 Jy ! Component: 600 - total flux cleaned = -0.00142217 Jy ! Component: 650 - total flux cleaned = -0.00154181 Jy ! Component: 700 - total flux cleaned = -0.00151801 Jy ! Component: 750 - total flux cleaned = -0.00156294 Jy ! Component: 800 - total flux cleaned = -0.00156233 Jy ! Component: 850 - total flux cleaned = -0.00158423 Jy ! Component: 900 - total flux cleaned = -0.00160593 Jy ! Component: 950 - total flux cleaned = -0.00160624 Jy ! Component: 1000 - total flux cleaned = -0.00169 Jy ! Component: 1050 - total flux cleaned = -0.00177213 Jy ! Component: 1100 - total flux cleaned = -0.00175218 Jy ! Component: 1150 - total flux cleaned = -0.00179207 Jy ! Component: 1200 - total flux cleaned = -0.00183119 Jy ! Component: 1250 - total flux cleaned = -0.00186968 Jy ! Component: 1300 - total flux cleaned = -0.00188877 Jy ! Component: 1350 - total flux cleaned = -0.0019449 Jy ! Component: 1400 - total flux cleaned = -0.00200021 Jy ! Component: 1450 - total flux cleaned = -0.00205458 Jy ! Component: 1500 - total flux cleaned = -0.00214325 Jy ! Component: 1550 - total flux cleaned = -0.00207284 Jy ! Component: 1600 - total flux cleaned = -0.00209056 Jy ! Component: 1650 - total flux cleaned = -0.00209072 Jy ! Component: 1700 - total flux cleaned = -0.00209064 Jy ! Component: 1750 - total flux cleaned = -0.00205766 Jy ! Component: 1800 - total flux cleaned = -0.00205774 Jy ! Component: 1850 - total flux cleaned = -0.00192852 Jy ! Component: 1900 - total flux cleaned = -0.00196094 Jy ! Component: 1950 - total flux cleaned = -0.00188213 Jy ! Component: 2000 - total flux cleaned = -0.00181983 Jy ! Component: 2050 - total flux cleaned = -0.00178925 Jy ! Component: 2100 - total flux cleaned = -0.00175866 Jy ! Component: 2150 - total flux cleaned = -0.00168344 Jy ! Component: 2200 - total flux cleaned = -0.00166872 Jy ! Component: 2250 - total flux cleaned = -0.00159533 Jy ! Component: 2300 - total flux cleaned = -0.00159537 Jy ! Component: 2350 - total flux cleaned = -0.00160984 Jy ! Component: 2400 - total flux cleaned = -0.00156723 Jy ! Component: 2450 - total flux cleaned = -0.00151092 Jy ! Component: 2500 - total flux cleaned = -0.00152488 Jy ! Component: 2550 - total flux cleaned = -0.00151103 Jy ! Component: 2600 - total flux cleaned = -0.00146996 Jy ! Component: 2650 - total flux cleaned = -0.00142935 Jy ! Component: 2700 - total flux cleaned = -0.00140266 Jy ! Component: 2750 - total flux cleaned = -0.0013892 Jy ! Component: 2800 - total flux cleaned = -0.00133673 Jy ! Component: 2850 - total flux cleaned = -0.00131092 Jy ! Component: 2900 - total flux cleaned = -0.00128526 Jy ! Component: 2950 - total flux cleaned = -0.00122169 Jy ! Component: 3000 - total flux cleaned = -0.00120906 Jy ! Component: 3050 - total flux cleaned = -0.00115885 Jy ! Component: 3100 - total flux cleaned = -0.00117119 Jy ! Component: 3150 - total flux cleaned = -0.0011342 Jy ! Component: 3200 - total flux cleaned = -0.0010975 Jy ! Component: 3250 - total flux cleaned = -0.00110956 Jy ! Component: 3300 - total flux cleaned = -0.00104947 Jy ! Component: 3350 - total flux cleaned = -0.00104949 Jy ! Component: 3400 - total flux cleaned = -0.00102584 Jy ! Component: 3450 - total flux cleaned = -0.00103752 Jy ! Component: 3500 - total flux cleaned = -0.00100257 Jy ! Component: 3550 - total flux cleaned = -0.000979358 Jy ! Component: 3600 - total flux cleaned = -0.000979211 Jy ! Component: 3650 - total flux cleaned = -0.000990617 Jy ! Component: 3700 - total flux cleaned = -0.000956583 Jy ! Component: 3750 - total flux cleaned = -0.00095645 Jy ! Component: 3800 - total flux cleaned = -0.000922986 Jy ! Component: 3850 - total flux cleaned = -0.000923069 Jy ! Component: 3900 - total flux cleaned = -0.000912027 Jy ! Component: 3950 - total flux cleaned = -0.000944824 Jy ! Component: 4000 - total flux cleaned = -0.00094483 Jy ! Component: 4050 - total flux cleaned = -0.000955523 Jy ! Total flux subtracted in 4096 components = -0.000966335 Jy ! Clean residual min=-0.000603 max=0.000740 Jy/beam ! Clean residual mean=-0.000002 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.0722307 Jy keep ! Adding 251 model components to the UV plane model. ! The established model now contains 348 components and 0.0722307 Jy ![Exited script file: muppet] wmap "J0313+0228_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.707 x 6.471 at 3.185 degrees (North through East) ! Clean map min=-0.0015571 max=0.05333 Jy/beam ! Writing clean map to FITS file: J0313+0228_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0533303 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000184742 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.03923 1.03923 2.07846 4.15693 8.31385 16.6277 33.2554 66.5108 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.053 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.707 x 6.471 at 3.185 degrees (North through East) ! Clean map min=-0.0015571 max=0.05333 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0313+0228_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:15:38 2017