! Started logfile: J0309+1029_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:03:40 2017 obs J0309+1029_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0309+1029_S_2015_01_23_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.934921 visibilities/baseline/integration-bin. ! Found source: J0309+1029 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 2356 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0309+1029_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.719538Jy sigma=0.007384 ! Fit after self-cal, rms=0.713317Jy sigma=0.007339 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.856 mas, bmaj=7.003 mas, bpa=-11.56 degrees ! Estimated noise=1750.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.255634 Jy ! Component: 100 - total flux cleaned = 0.315235 Jy ! Total flux subtracted in 100 components = 0.315235 Jy ! Clean residual min=-0.021095 max=0.037288 Jy/beam ! Clean residual mean=-0.000075 rms=0.006320 Jy/beam ! Combined flux in latest and established models = 0.315235 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.315235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158461Jy sigma=0.001213 ! Fit after self-cal, rms=0.158424Jy sigma=0.001213 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.261 mas, bmaj=7.539 mas, bpa=-11.79 degrees ! Estimated noise=1397.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19.5, 22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0436216 Jy ! Component: 100 - total flux cleaned = 0.0673414 Jy ! Component: 150 - total flux cleaned = 0.0772355 Jy ! Component: 200 - total flux cleaned = 0.0842946 Jy ! Total flux subtracted in 200 components = 0.0842946 Jy ! Clean residual min=-0.018509 max=0.036337 Jy/beam ! Clean residual mean=-0.000070 rms=0.005471 Jy/beam ! Combined flux in latest and established models = 0.39953 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 47 components and 0.39953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140002Jy sigma=0.001045 ! Fit after self-cal, rms=0.138287Jy sigma=0.001015 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 2.45 HN 0.89 KP 1.11 ! LA 0.96 MK 1.06 NL 1.04 OV 0.94 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 2.80 HN 0.99 KP 1.01 ! LA 0.93 MK 1.09 NL 1.12 OV 1.01 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 2.96 HN 0.96 KP 0.86 ! LA 0.76 MK 1.07 NL 1.15 OV 0.89 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 6.17 HN 0.89 KP 0.80 ! LA 0.80 MK 1.04 NL 1.00 OV 0.95 ! PT 1.01 SC 0.94 ! ! ! Fit before self-cal, rms=0.138287Jy sigma=0.001015 ! Fit after self-cal, rms=0.230644Jy sigma=0.000798 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.297 mas, bmaj=7.536 mas, bpa=-11.54 degrees ! Estimated noise=1427.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00275119 Jy ! Component: 100 - total flux cleaned = -0.0027568 Jy ! Component: 150 - total flux cleaned = -0.0024074 Jy ! Component: 200 - total flux cleaned = -0.00225473 Jy ! Total flux subtracted in 200 components = -0.00225473 Jy ! Clean residual min=-0.007714 max=0.007820 Jy/beam ! Clean residual mean=-0.000002 rms=0.002030 Jy/beam ! Combined flux in latest and established models = 0.397275 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 66 components and 0.397275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230269Jy sigma=0.000787 ! Fit after self-cal, rms=0.230481Jy sigma=0.000786 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230481Jy sigma=0.000786 ! Fit after self-cal, rms=0.236158Jy sigma=0.000785 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=7.547 mas, bpa=-11.56 degrees ! Estimated noise=1420.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00266662 Jy ! Component: 100 - total flux cleaned = -0.00252219 Jy ! Component: 150 - total flux cleaned = -0.00252415 Jy ! Component: 200 - total flux cleaned = -0.00264117 Jy ! Total flux subtracted in 200 components = -0.00264117 Jy ! Clean residual min=-0.007107 max=0.006923 Jy/beam ! Clean residual mean=-0.000002 rms=0.001825 Jy/beam ! Combined flux in latest and established models = 0.394634 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 78 components and 0.394634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235989Jy sigma=0.000779 ! Fit after self-cal, rms=0.235980Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000374937 Jy ! Component: 100 - total flux cleaned = -0.000484188 Jy ! Component: 150 - total flux cleaned = -0.000279185 Jy ! Component: 200 - total flux cleaned = -0.000182169 Jy ! Total flux subtracted in 200 components = -0.000182169 Jy ! Clean residual min=-0.007018 max=0.006551 Jy/beam ! Clean residual mean=-0.000003 rms=0.001725 Jy/beam ! Combined flux in latest and established models = 0.394452 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 88 components and 0.394452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235908Jy sigma=0.000776 ! Fit after self-cal, rms=0.235906Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235906Jy sigma=0.000776 ! Fit after self-cal, rms=0.244334Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.306 mas, bmaj=7.554 mas, bpa=-11.58 degrees ! Estimated noise=1416.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00270288 Jy ! Component: 100 - total flux cleaned = -0.00299426 Jy ! Component: 150 - total flux cleaned = -0.00307775 Jy ! Component: 200 - total flux cleaned = -0.00315852 Jy ! Total flux subtracted in 200 components = -0.00315852 Jy ! Clean residual min=-0.006813 max=0.006254 Jy/beam ! Clean residual mean=-0.000003 rms=0.001624 Jy/beam ! Combined flux in latest and established models = 0.391293 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 93 components and 0.391294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244238Jy sigma=0.000773 ! Fit after self-cal, rms=0.244247Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000421404 Jy ! Component: 100 - total flux cleaned = -0.00049723 Jy ! Component: 150 - total flux cleaned = -0.000566316 Jy ! Component: 200 - total flux cleaned = -0.000632645 Jy ! Total flux subtracted in 200 components = -0.000632645 Jy ! Clean residual min=-0.006828 max=0.006037 Jy/beam ! Clean residual mean=-0.000004 rms=0.001573 Jy/beam ! Combined flux in latest and established models = 0.390661 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 101 components and 0.390661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244205Jy sigma=0.000772 ! Fit after self-cal, rms=0.244207Jy sigma=0.000772 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244207Jy sigma=0.000772 ! Fit after self-cal, rms=0.250630Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.364 mas, bmaj=10.76 mas, bpa=-1.296 degrees ! Estimated noise=1789.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000495402 Jy ! Component: 100 - total flux cleaned = -0.000485664 Jy ! Component: 150 - total flux cleaned = -0.000597157 Jy ! Component: 200 - total flux cleaned = -0.000794148 Jy ! Total flux subtracted in 200 components = -0.000794148 Jy ! Clean residual min=-0.007966 max=0.007361 Jy/beam ! Clean residual mean=-0.000008 rms=0.002090 Jy/beam ! Combined flux in latest and established models = 0.389867 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 108 components and 0.389867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250579Jy sigma=0.000770 ! Fit after self-cal, rms=0.250610Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.16258e-05 Jy ! Component: 100 - total flux cleaned = -0.000530822 Jy ! Component: 150 - total flux cleaned = -0.000615568 Jy ! Component: 200 - total flux cleaned = -0.000693382 Jy ! Total flux subtracted in 200 components = -0.000693382 Jy ! Clean residual min=-0.007731 max=0.006923 Jy/beam ! Clean residual mean=-0.000009 rms=0.001998 Jy/beam ! Combined flux in latest and established models = 0.389173 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 112 components and 0.389173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250601Jy sigma=0.000770 ! Fit after self-cal, rms=0.250616Jy sigma=0.000769 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=7.56 mas, bpa=-11.59 degrees ! Estimated noise=1413.33 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.307 x 7.56 at -11.59 degrees (North through East) ! Clean map min=-0.0065223 max=0.31247 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.896 mas, bmaj=7.025 mas, bpa=-11.4 degrees ! Estimated noise=1748.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.254893 Jy ! Component: 100 - total flux cleaned = 0.314283 Jy ! Component: 150 - total flux cleaned = 0.339603 Jy ! Component: 200 - total flux cleaned = 0.354119 Jy ! Total flux subtracted in 200 components = 0.354119 Jy ! Clean residual min=-0.009405 max=0.012717 Jy/beam ! Clean residual mean=-0.000022 rms=0.002431 Jy/beam ! Combined flux in latest and established models = 0.354119 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.354119 Jy ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=7.56 mas, bpa=-11.59 degrees ! Estimated noise=1413.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141864 Jy ! Component: 100 - total flux cleaned = 0.0222414 Jy ! Component: 150 - total flux cleaned = 0.0274659 Jy ! Component: 200 - total flux cleaned = 0.0301299 Jy ! Total flux subtracted in 200 components = 0.0301299 Jy ! Clean residual min=-0.006097 max=0.005671 Jy/beam ! Clean residual mean=-0.000007 rms=0.001335 Jy/beam ! Combined flux in latest and established models = 0.384249 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 69 components and 0.384248 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.364 mas, bmaj=10.76 mas, bpa=-1.296 degrees ! Estimated noise=1789.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463097 Jy ! Component: 100 - total flux cleaned = 0.00724916 Jy ! Component: 150 - total flux cleaned = 0.0085843 Jy ! Component: 200 - total flux cleaned = 0.00905796 Jy ! Total flux subtracted in 200 components = 0.00905796 Jy ! Clean residual min=-0.006245 max=0.006197 Jy/beam ! Clean residual mean=-0.000004 rms=0.001572 Jy/beam ! Combined flux in latest and established models = 0.393306 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000265702 Jy ! Component: 100 - total flux cleaned = 0.000497539 Jy ! Component: 150 - total flux cleaned = 0.000637353 Jy ! Component: 200 - total flux cleaned = 0.000669401 Jy ! Total flux subtracted in 200 components = 0.000669401 Jy ! Clean residual min=-0.006090 max=0.006103 Jy/beam ! Clean residual mean=-0.000003 rms=0.001552 Jy/beam ! Combined flux in latest and established models = 0.393976 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 129 components and 0.393976 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=7.56 mas, bpa=-11.59 degrees ! Estimated noise=1413.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000295739 Jy ! Component: 100 - total flux cleaned = -0.000296385 Jy ! Component: 150 - total flux cleaned = -0.000240336 Jy ! Component: 200 - total flux cleaned = -0.000142945 Jy ! Total flux subtracted in 200 components = -0.000142945 Jy ! Clean residual min=-0.005449 max=0.004957 Jy/beam ! Clean residual mean=-0.000002 rms=0.001182 Jy/beam ! Combined flux in latest and established models = 0.393833 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 149 components and 0.393833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250157Jy sigma=0.000763 ! Fit after self-cal, rms=0.250312Jy sigma=0.000761 wmodel J0309+1029_S_2015_01_23_pus_map.mod ! Writing 149 model components to file: J0309+1029_S_2015_01_23_pus_map.mod wobs J0309+1029_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0309+1029_S_2015_01_23_pus_uvs.fits wwins J0309+1029_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J0309+1029_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00226844 Jy ! Component: 100 - total flux cleaned = -0.00296543 Jy ! Component: 150 - total flux cleaned = -0.00366868 Jy ! Component: 200 - total flux cleaned = -0.0040004 Jy ! Component: 250 - total flux cleaned = -0.00419028 Jy ! Component: 300 - total flux cleaned = -0.00430954 Jy ! Component: 350 - total flux cleaned = -0.00436651 Jy ! Component: 400 - total flux cleaned = -0.00464919 Jy ! Component: 450 - total flux cleaned = -0.00503201 Jy ! Component: 500 - total flux cleaned = -0.00529734 Jy ! Component: 550 - total flux cleaned = -0.00550503 Jy ! Component: 600 - total flux cleaned = -0.00575717 Jy ! Component: 650 - total flux cleaned = -0.00600287 Jy ! Component: 700 - total flux cleaned = -0.00614759 Jy ! Component: 750 - total flux cleaned = -0.006524 Jy ! Component: 800 - total flux cleaned = -0.0067531 Jy ! Component: 850 - total flux cleaned = -0.00697773 Jy ! Component: 900 - total flux cleaned = -0.0071976 Jy ! Component: 950 - total flux cleaned = -0.00737034 Jy ! Component: 1000 - total flux cleaned = -0.00758139 Jy ! Component: 1050 - total flux cleaned = -0.00762237 Jy ! Component: 1100 - total flux cleaned = -0.00770412 Jy ! Component: 1150 - total flux cleaned = -0.00774488 Jy ! Component: 1200 - total flux cleaned = -0.00762667 Jy ! Component: 1250 - total flux cleaned = -0.00758797 Jy ! Component: 1300 - total flux cleaned = -0.00743547 Jy ! Component: 1350 - total flux cleaned = -0.007512 Jy ! Component: 1400 - total flux cleaned = -0.0075122 Jy ! Component: 1450 - total flux cleaned = -0.00740227 Jy ! Component: 1500 - total flux cleaned = -0.00736703 Jy ! Component: 1550 - total flux cleaned = -0.00729635 Jy ! Component: 1600 - total flux cleaned = -0.00733163 Jy ! Component: 1650 - total flux cleaned = -0.00726178 Jy ! Component: 1700 - total flux cleaned = -0.00719353 Jy ! Component: 1750 - total flux cleaned = -0.00715957 Jy ! Component: 1800 - total flux cleaned = -0.00712653 Jy ! Component: 1850 - total flux cleaned = -0.00715948 Jy ! Component: 1900 - total flux cleaned = -0.00715969 Jy ! Component: 1950 - total flux cleaned = -0.00719213 Jy ! Component: 2000 - total flux cleaned = -0.00728788 Jy ! Component: 2050 - total flux cleaned = -0.00731906 Jy ! Component: 2100 - total flux cleaned = -0.00738215 Jy ! Component: 2150 - total flux cleaned = -0.00738218 Jy ! Component: 2200 - total flux cleaned = -0.00744406 Jy ! Component: 2250 - total flux cleaned = -0.00762648 Jy ! Component: 2300 - total flux cleaned = -0.00759678 Jy ! Component: 2350 - total flux cleaned = -0.00768639 Jy ! Component: 2400 - total flux cleaned = -0.00780531 Jy ! Component: 2450 - total flux cleaned = -0.0078345 Jy ! Component: 2500 - total flux cleaned = -0.00789312 Jy ! Component: 2550 - total flux cleaned = -0.00792242 Jy ! Component: 2600 - total flux cleaned = -0.00795143 Jy ! Component: 2650 - total flux cleaned = -0.00803746 Jy ! Component: 2700 - total flux cleaned = -0.00803757 Jy ! Component: 2750 - total flux cleaned = -0.0080661 Jy ! Component: 2800 - total flux cleaned = -0.0081507 Jy ! Component: 2850 - total flux cleaned = -0.00817871 Jy ! Component: 2900 - total flux cleaned = -0.00815085 Jy ! Component: 2950 - total flux cleaned = -0.00817876 Jy ! Component: 3000 - total flux cleaned = -0.00823375 Jy ! Component: 3050 - total flux cleaned = -0.00826127 Jy ! Component: 3100 - total flux cleaned = -0.00826138 Jy ! Component: 3150 - total flux cleaned = -0.00826134 Jy ! Component: 3200 - total flux cleaned = -0.00831524 Jy ! Component: 3250 - total flux cleaned = -0.0083152 Jy ! Component: 3300 - total flux cleaned = -0.00831516 Jy ! Component: 3350 - total flux cleaned = -0.00834181 Jy ! Component: 3400 - total flux cleaned = -0.00836813 Jy ! Component: 3450 - total flux cleaned = -0.00836816 Jy ! Component: 3500 - total flux cleaned = -0.00844683 Jy ! Component: 3550 - total flux cleaned = -0.00839452 Jy ! Component: 3600 - total flux cleaned = -0.00844656 Jy ! Component: 3650 - total flux cleaned = -0.00842064 Jy ! Component: 3700 - total flux cleaned = -0.00842062 Jy ! Component: 3750 - total flux cleaned = -0.00852341 Jy ! Component: 3800 - total flux cleaned = -0.00854904 Jy ! Component: 3850 - total flux cleaned = -0.00872799 Jy ! Component: 3900 - total flux cleaned = -0.00880458 Jy ! Component: 3950 - total flux cleaned = -0.00890642 Jy ! Component: 4000 - total flux cleaned = -0.00893182 Jy ! Component: 4050 - total flux cleaned = -0.00903345 Jy ! Total flux subtracted in 4096 components = -0.00910965 Jy ! Clean residual min=-0.001620 max=0.001416 Jy/beam ! Clean residual mean=-0.000003 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.384723 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 434 components and 0.384724 Jy ![Exited script file: muppet] wmap "J0309+1029_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.307 x 7.56 at -11.59 degrees (North through East) ! Clean map min=-0.0035097 max=0.31489 Jy/beam ! Writing clean map to FITS file: J0309+1029_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.314887 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00043379 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.413282 0.413282 0.826563 1.65313 3.30625 6.61251 13.225 26.45 52.9001 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.314 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.307 x 7.56 at -11.59 degrees (North through East) ! Clean map min=-0.0035097 max=0.31489 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0309+1029_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:03:45 2017