! Started logfile: J0306+6243_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:03:35 2017 obs J0306+6243_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0306+6243_S_2015_01_23_pus_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.844444 visibilities/baseline/integration-bin. ! Found source: J0306+6243 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 4560 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0306+6243_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.871244Jy sigma=0.008586 ! Fit after self-cal, rms=0.841807Jy sigma=0.008472 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=4.047 mas, bpa=69.94 degrees ! Estimated noise=1385.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13972 Jy ! Component: 100 - total flux cleaned = 0.185149 Jy ! Total flux subtracted in 100 components = 0.185149 Jy ! Clean residual min=-0.014595 max=0.021195 Jy/beam ! Clean residual mean=-0.000016 rms=0.004212 Jy/beam ! Combined flux in latest and established models = 0.185149 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.185149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218738Jy sigma=0.001417 ! Fit after self-cal, rms=0.218687Jy sigma=0.001417 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=4.736 mas, bpa=67.04 degrees ! Estimated noise=1096.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0295222 Jy ! Component: 100 - total flux cleaned = 0.044094 Jy ! Component: 150 - total flux cleaned = 0.0517993 Jy ! Component: 200 - total flux cleaned = 0.0562623 Jy ! Total flux subtracted in 200 components = 0.0562623 Jy ! Clean residual min=-0.010246 max=0.011582 Jy/beam ! Clean residual mean=0.000011 rms=0.003131 Jy/beam ! Combined flux in latest and established models = 0.241412 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 30 components and 0.241412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216502Jy sigma=0.001350 ! Fit after self-cal, rms=0.216456Jy sigma=0.001349 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.36 HN 1.08 KP 1.11 ! LA 0.98 MK 1.10 NL 0.84 OV 0.84 ! PT 0.92 SC 0.89 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.49 HN 1.01 KP 1.03 ! LA 1.12 MK 1.03 NL 0.96 OV 0.96 ! PT 0.99 SC 1.19 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.88 HN 1.01 KP 0.86 ! LA 0.93 MK 1.06 NL 1.07 OV 0.91 ! PT 1.02 SC 1.10 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.56 HN 0.97 KP 0.79 ! LA 1.05 MK 1.04 NL 1.02 OV 0.98 ! PT 1.00 SC 1.04 ! ! ! Fit before self-cal, rms=0.216456Jy sigma=0.001349 ! Fit after self-cal, rms=0.265699Jy sigma=0.001324 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.68 mas, bmaj=4.802 mas, bpa=66.76 degrees ! Estimated noise=1107.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013922 Jy ! Component: 100 - total flux cleaned = 0.00158129 Jy ! Component: 150 - total flux cleaned = 0.00154559 Jy ! Component: 200 - total flux cleaned = 0.00158052 Jy ! Total flux subtracted in 200 components = 0.00158052 Jy ! Clean residual min=-0.009531 max=0.010308 Jy/beam ! Clean residual mean=0.000035 rms=0.002920 Jy/beam ! Combined flux in latest and established models = 0.242992 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.242992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.265668Jy sigma=0.001323 ! Fit after self-cal, rms=0.266061Jy sigma=0.001323 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266061Jy sigma=0.001323 ! Fit after self-cal, rms=0.325229Jy sigma=0.001289 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.7 mas, bmaj=4.84 mas, bpa=64.17 degrees ! Estimated noise=1127.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253192 Jy ! Component: 100 - total flux cleaned = 0.00240969 Jy ! Component: 150 - total flux cleaned = 0.00230606 Jy ! Component: 200 - total flux cleaned = 0.00226241 Jy ! Total flux subtracted in 200 components = 0.00226241 Jy ! Clean residual min=-0.008396 max=0.012305 Jy/beam ! Clean residual mean=0.000086 rms=0.002761 Jy/beam ! Combined flux in latest and established models = 0.245255 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 46 components and 0.245255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325091Jy sigma=0.001289 ! Fit after self-cal, rms=0.327259Jy sigma=0.001283 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-82, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110608 Jy ! Component: 100 - total flux cleaned = 0.0163794 Jy ! Component: 150 - total flux cleaned = 0.0180777 Jy ! Component: 200 - total flux cleaned = 0.0188925 Jy ! Total flux subtracted in 200 components = 0.0188925 Jy ! Clean residual min=-0.008208 max=0.010527 Jy/beam ! Clean residual mean=0.000076 rms=0.002538 Jy/beam ! Combined flux in latest and established models = 0.264147 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 73 components and 0.264147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.326773Jy sigma=0.001274 ! Fit after self-cal, rms=0.326368Jy sigma=0.001273 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.326368Jy sigma=0.001273 ! Fit after self-cal, rms=0.335604Jy sigma=0.001270 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.704 mas, bmaj=4.851 mas, bpa=63.54 degrees ! Estimated noise=1139.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00569853 Jy ! Component: 100 - total flux cleaned = 0.00900058 Jy ! Component: 150 - total flux cleaned = 0.0100487 Jy ! Component: 200 - total flux cleaned = 0.0107587 Jy ! Total flux subtracted in 200 components = 0.0107587 Jy ! Clean residual min=-0.008484 max=0.010780 Jy/beam ! Clean residual mean=0.000089 rms=0.002596 Jy/beam ! Combined flux in latest and established models = 0.274906 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 98 components and 0.274906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.335281Jy sigma=0.001269 ! Fit after self-cal, rms=0.335638Jy sigma=0.001269 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014851 Jy ! Component: 100 - total flux cleaned = 0.00183347 Jy ! Component: 150 - total flux cleaned = 0.00230058 Jy ! Component: 200 - total flux cleaned = 0.00265594 Jy ! Total flux subtracted in 200 components = 0.00265594 Jy ! Clean residual min=-0.008578 max=0.010508 Jy/beam ! Clean residual mean=0.000090 rms=0.002585 Jy/beam ! Combined flux in latest and established models = 0.277562 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 110 components and 0.277562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.335525Jy sigma=0.001269 ! Fit after self-cal, rms=0.335453Jy sigma=0.001269 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.335453Jy sigma=0.001269 ! Fit after self-cal, rms=0.332417Jy sigma=0.001268 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.433 mas, bmaj=9.34 mas, bpa=65.21 degrees ! Estimated noise=1512.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00367732 Jy ! Component: 100 - total flux cleaned = 0.00586466 Jy ! Component: 150 - total flux cleaned = 0.00729552 Jy ! Component: 200 - total flux cleaned = 0.00776117 Jy ! Total flux subtracted in 200 components = 0.00776117 Jy ! Clean residual min=-0.012379 max=0.015545 Jy/beam ! Clean residual mean=0.000217 rms=0.004442 Jy/beam ! Combined flux in latest and established models = 0.285323 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 129 components and 0.285323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.332329Jy sigma=0.001269 ! Fit after self-cal, rms=0.332219Jy sigma=0.001269 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012217 Jy ! Component: 100 - total flux cleaned = 0.00156099 Jy ! Component: 150 - total flux cleaned = 0.00177898 Jy ! Component: 200 - total flux cleaned = 0.00190928 Jy ! Total flux subtracted in 200 components = 0.00190928 Jy ! Clean residual min=-0.012689 max=0.015246 Jy/beam ! Clean residual mean=0.000221 rms=0.004460 Jy/beam ! Combined flux in latest and established models = 0.287232 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 133 components and 0.287232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.332188Jy sigma=0.001269 ! Fit after self-cal, rms=0.332131Jy sigma=0.001269 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.7 mas, bmaj=4.846 mas, bpa=63.34 degrees ! Estimated noise=1149.29 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.7 x 4.846 at 63.34 degrees (North through East) ! Clean map min=-0.0086928 max=0.19666 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=4.14 mas, bpa=65.62 degrees ! Estimated noise=1446.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.144687 Jy ! Component: 100 - total flux cleaned = 0.189301 Jy ! Component: 150 - total flux cleaned = 0.213563 Jy ! Component: 200 - total flux cleaned = 0.229527 Jy ! Total flux subtracted in 200 components = 0.229527 Jy ! Clean residual min=-0.008977 max=0.012232 Jy/beam ! Clean residual mean=0.000017 rms=0.002623 Jy/beam ! Combined flux in latest and established models = 0.229527 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.229527 Jy ! Inverting map and beam ! Estimated beam: bmin=3.7 mas, bmaj=4.846 mas, bpa=63.34 degrees ! Estimated noise=1149.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156827 Jy ! Component: 100 - total flux cleaned = 0.0263798 Jy ! Component: 150 - total flux cleaned = 0.0341686 Jy ! Component: 200 - total flux cleaned = 0.0400462 Jy ! Total flux subtracted in 200 components = 0.0400462 Jy ! Clean residual min=-0.008834 max=0.011297 Jy/beam ! Clean residual mean=0.000078 rms=0.002692 Jy/beam ! Combined flux in latest and established models = 0.269573 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 63 components and 0.269573 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.433 mas, bmaj=9.34 mas, bpa=65.21 degrees ! Estimated noise=1512.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00648559 Jy ! Component: 100 - total flux cleaned = 0.0103025 Jy ! Component: 150 - total flux cleaned = 0.0122097 Jy ! Component: 200 - total flux cleaned = 0.0133011 Jy ! Total flux subtracted in 200 components = 0.0133011 Jy ! Clean residual min=-0.012517 max=0.015116 Jy/beam ! Clean residual mean=0.000207 rms=0.004455 Jy/beam ! Combined flux in latest and established models = 0.282874 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000851622 Jy ! Component: 100 - total flux cleaned = 0.00158876 Jy ! Component: 150 - total flux cleaned = 0.00228297 Jy ! Component: 200 - total flux cleaned = 0.00268908 Jy ! Total flux subtracted in 200 components = 0.00268908 Jy ! Clean residual min=-0.012789 max=0.015053 Jy/beam ! Clean residual mean=0.000214 rms=0.004459 Jy/beam ! Combined flux in latest and established models = 0.285563 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 108 components and 0.285564 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.7 mas, bmaj=4.846 mas, bpa=63.34 degrees ! Estimated noise=1149.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00126859 Jy ! Component: 100 - total flux cleaned = -0.00126638 Jy ! Component: 150 - total flux cleaned = -0.0013761 Jy ! Component: 200 - total flux cleaned = -0.00137808 Jy ! Total flux subtracted in 200 components = -0.00137808 Jy ! Clean residual min=-0.008721 max=0.010991 Jy/beam ! Clean residual mean=0.000094 rms=0.002669 Jy/beam ! Combined flux in latest and established models = 0.284185 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 131 components and 0.284185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.332051Jy sigma=0.001269 ! Fit after self-cal, rms=0.332017Jy sigma=0.001269 wmodel J0306+6243_S_2015_01_23_pus_map.mod ! Writing 131 model components to file: J0306+6243_S_2015_01_23_pus_map.mod wobs J0306+6243_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0306+6243_S_2015_01_23_pus_uvs.fits wwins J0306+6243_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J0306+6243_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504514 Jy ! Component: 100 - total flux cleaned = 0.00952038 Jy ! Component: 150 - total flux cleaned = 0.0134977 Jy ! Component: 200 - total flux cleaned = 0.0161754 Jy ! Component: 250 - total flux cleaned = 0.017842 Jy ! Component: 300 - total flux cleaned = 0.0190197 Jy ! Component: 350 - total flux cleaned = 0.0201711 Jy ! Component: 400 - total flux cleaned = 0.0214334 Jy ! Component: 450 - total flux cleaned = 0.0222546 Jy ! Component: 500 - total flux cleaned = 0.0235944 Jy ! Component: 550 - total flux cleaned = 0.0246398 Jy ! Component: 600 - total flux cleaned = 0.0255361 Jy ! Component: 650 - total flux cleaned = 0.0267902 Jy ! Component: 700 - total flux cleaned = 0.027528 Jy ! Component: 750 - total flux cleaned = 0.0283713 Jy ! Component: 800 - total flux cleaned = 0.0291979 Jy ! Component: 850 - total flux cleaned = 0.0300104 Jy ! Component: 900 - total flux cleaned = 0.0308086 Jy ! Component: 950 - total flux cleaned = 0.031481 Jy ! Component: 1000 - total flux cleaned = 0.0321415 Jy ! Component: 1050 - total flux cleaned = 0.0329008 Jy ! Component: 1100 - total flux cleaned = 0.033542 Jy ! Component: 1150 - total flux cleaned = 0.0342784 Jy ! Component: 1200 - total flux cleaned = 0.0349008 Jy ! Component: 1250 - total flux cleaned = 0.0355146 Jy ! Component: 1300 - total flux cleaned = 0.0357174 Jy ! Component: 1350 - total flux cleaned = 0.0362161 Jy ! Component: 1400 - total flux cleaned = 0.0364142 Jy ! Component: 1450 - total flux cleaned = 0.0367067 Jy ! Component: 1500 - total flux cleaned = 0.0368047 Jy ! Component: 1550 - total flux cleaned = 0.0371858 Jy ! Component: 1600 - total flux cleaned = 0.0372809 Jy ! Component: 1650 - total flux cleaned = 0.0374678 Jy ! Component: 1700 - total flux cleaned = 0.0377444 Jy ! Component: 1750 - total flux cleaned = 0.0378354 Jy ! Component: 1800 - total flux cleaned = 0.0378351 Jy ! Component: 1850 - total flux cleaned = 0.038192 Jy ! Component: 1900 - total flux cleaned = 0.0384576 Jy ! Component: 1950 - total flux cleaned = 0.0388956 Jy ! Component: 2000 - total flux cleaned = 0.0388957 Jy ! Component: 2050 - total flux cleaned = 0.0392395 Jy ! Component: 2100 - total flux cleaned = 0.0397508 Jy ! Component: 2150 - total flux cleaned = 0.0398355 Jy ! Component: 2200 - total flux cleaned = 0.0403372 Jy ! Component: 2250 - total flux cleaned = 0.0404216 Jy ! Component: 2300 - total flux cleaned = 0.0409967 Jy ! Component: 2350 - total flux cleaned = 0.041159 Jy ! Component: 2400 - total flux cleaned = 0.0414834 Jy ! Component: 2450 - total flux cleaned = 0.0419645 Jy ! Component: 2500 - total flux cleaned = 0.0424419 Jy ! Component: 2550 - total flux cleaned = 0.0426778 Jy ! Component: 2600 - total flux cleaned = 0.0430693 Jy ! Component: 2650 - total flux cleaned = 0.043458 Jy ! Component: 2700 - total flux cleaned = 0.0439206 Jy ! Component: 2750 - total flux cleaned = 0.0441493 Jy ! Component: 2800 - total flux cleaned = 0.0444529 Jy ! Component: 2850 - total flux cleaned = 0.0445283 Jy ! Component: 2900 - total flux cleaned = 0.0450526 Jy ! Component: 2950 - total flux cleaned = 0.0452012 Jy ! Component: 3000 - total flux cleaned = 0.0454969 Jy ! Component: 3050 - total flux cleaned = 0.0454234 Jy ! Component: 3100 - total flux cleaned = 0.0457155 Jy ! Component: 3150 - total flux cleaned = 0.0457157 Jy ! Component: 3200 - total flux cleaned = 0.0459314 Jy ! Component: 3250 - total flux cleaned = 0.0460748 Jy ! Component: 3300 - total flux cleaned = 0.0463593 Jy ! Component: 3350 - total flux cleaned = 0.0463596 Jy ! Component: 3400 - total flux cleaned = 0.0465701 Jy ! Component: 3450 - total flux cleaned = 0.0467795 Jy ! Component: 3500 - total flux cleaned = 0.0468489 Jy ! Component: 3550 - total flux cleaned = 0.0466418 Jy ! Component: 3600 - total flux cleaned = 0.0470537 Jy ! Component: 3650 - total flux cleaned = 0.0470537 Jy ! Component: 3700 - total flux cleaned = 0.0471217 Jy ! Component: 3750 - total flux cleaned = 0.0474589 Jy ! Component: 3800 - total flux cleaned = 0.0473248 Jy ! Component: 3850 - total flux cleaned = 0.0473248 Jy ! Component: 3900 - total flux cleaned = 0.0477892 Jy ! Component: 3950 - total flux cleaned = 0.047855 Jy ! Component: 4000 - total flux cleaned = 0.0479862 Jy ! Component: 4050 - total flux cleaned = 0.0481168 Jy ! Total flux subtracted in 4096 components = 0.0481819 Jy ! Clean residual min=-0.003626 max=0.004932 Jy/beam ! Clean residual mean=0.000039 rms=0.001347 Jy/beam ! Combined flux in latest and established models = 0.332368 Jy keep ! Adding 419 model components to the UV plane model. ! The established model now contains 550 components and 0.332368 Jy ![Exited script file: muppet] wmap "J0306+6243_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.7 x 4.846 at 63.34 degrees (North through East) ! Clean map min=-0.0072807 max=0.19908 Jy/beam ! Writing clean map to FITS file: J0306+6243_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.19908 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0013154 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.98222 1.98222 3.96445 7.9289 15.8578 31.7156 63.4312 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0039 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.199 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.7 x 4.846 at 63.34 degrees (North through East) ! Clean map min=-0.0072807 max=0.19908 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0306+6243_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:03:40 2017