! Started logfile: J0301-3126_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:03:30 2017 obs J0301-3126_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0301-3126_S_2015_01_23_pus_uva.fits ! AN table 1: 104 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.979274 visibilities/baseline/integration-bin. ! Found source: J0301-3126 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 18332 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0301-3126_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.936241Jy sigma=0.007549 ! Fit after self-cal, rms=0.895738Jy sigma=0.007285 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.35 mas, bmaj=6.374 mas, bpa=-6.216 degrees ! Estimated noise=935.623 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0857405 Jy ! Component: 100 - total flux cleaned = 0.106694 Jy ! Total flux subtracted in 100 components = 0.106694 Jy ! Clean residual min=-0.006202 max=0.008184 Jy/beam ! Clean residual mean=-0.000033 rms=0.001508 Jy/beam ! Combined flux in latest and established models = 0.106694 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.106694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151928Jy sigma=0.000834 ! Fit after self-cal, rms=0.151896Jy sigma=0.000833 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.914 mas, bmaj=7.948 mas, bpa=-5.818 degrees ! Estimated noise=664.877 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119245 Jy ! Component: 100 - total flux cleaned = 0.0176475 Jy ! Component: 150 - total flux cleaned = 0.0208596 Jy ! Component: 200 - total flux cleaned = 0.0226687 Jy ! Total flux subtracted in 200 components = 0.0226687 Jy ! Clean residual min=-0.005878 max=0.006846 Jy/beam ! Clean residual mean=-0.000075 rms=0.001679 Jy/beam ! Combined flux in latest and established models = 0.129362 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 27 components and 0.129362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150920Jy sigma=0.000823 ! Fit after self-cal, rms=0.150927Jy sigma=0.000823 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.53 HN 1.13 KP 1.05 ! LA 0.94 MK 1.00 NL 1.12 OV 0.92 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.81 HN 1.16 KP 0.99 ! LA 0.91 MK 0.96 NL 1.18 OV 0.95 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 2.11 HN 1.19 KP 0.85 ! LA 0.75 MK 1.04 NL 1.11 OV 0.87 ! PT 0.90 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.86 HN 1.13 KP 0.78 ! LA 0.80 MK 1.03 NL 1.01 OV 0.95 ! PT 0.97 SC 0.97 ! ! ! Fit before self-cal, rms=0.150927Jy sigma=0.000823 ! Fit after self-cal, rms=0.238926Jy sigma=0.000797 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.927 mas, bmaj=7.89 mas, bpa=-5.431 degrees ! Estimated noise=674.257 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207514 Jy ! Component: 100 - total flux cleaned = 0.00255124 Jy ! Component: 150 - total flux cleaned = 0.00252692 Jy ! Component: 200 - total flux cleaned = 0.00250428 Jy ! Total flux subtracted in 200 components = 0.00250428 Jy ! Clean residual min=-0.002656 max=0.002791 Jy/beam ! Clean residual mean=-0.000001 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.131867 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.131867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238837Jy sigma=0.000796 ! Fit after self-cal, rms=0.239573Jy sigma=0.000795 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239573Jy sigma=0.000795 ! Fit after self-cal, rms=0.251755Jy sigma=0.000795 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=7.835 mas, bpa=-5.454 degrees ! Estimated noise=680.854 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176934 Jy ! Component: 100 - total flux cleaned = 0.00242463 Jy ! Component: 150 - total flux cleaned = 0.00245897 Jy ! Component: 200 - total flux cleaned = 0.00244433 Jy ! Total flux subtracted in 200 components = 0.00244433 Jy ! Clean residual min=-0.002678 max=0.002846 Jy/beam ! Clean residual mean=0.000002 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.134311 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.134311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251675Jy sigma=0.000795 ! Fit after self-cal, rms=0.251713Jy sigma=0.000795 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.98658e-07 Jy ! Component: 100 - total flux cleaned = -1.45893e-05 Jy ! Component: 150 - total flux cleaned = -2.68937e-05 Jy ! Component: 200 - total flux cleaned = -3.84354e-05 Jy ! Total flux subtracted in 200 components = -3.84354e-05 Jy ! Clean residual min=-0.002672 max=0.002844 Jy/beam ! Clean residual mean=0.000002 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.134273 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 0.134273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251710Jy sigma=0.000795 ! Fit after self-cal, rms=0.251712Jy sigma=0.000795 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251712Jy sigma=0.000795 ! Fit after self-cal, rms=0.165794Jy sigma=0.000792 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.897 mas, bmaj=7.823 mas, bpa=-5.463 degrees ! Estimated noise=680.109 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000448217 Jy ! Component: 100 - total flux cleaned = 0.000462511 Jy ! Component: 150 - total flux cleaned = 0.000433643 Jy ! Component: 200 - total flux cleaned = 0.00042592 Jy ! Total flux subtracted in 200 components = 0.00042592 Jy ! Clean residual min=-0.002333 max=0.001966 Jy/beam ! Clean residual mean=-0.000002 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.134699 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.134699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165790Jy sigma=0.000792 ! Fit after self-cal, rms=0.165669Jy sigma=0.000792 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.45298e-05 Jy ! Component: 100 - total flux cleaned = 2.50497e-05 Jy ! Component: 150 - total flux cleaned = 1.10006e-05 Jy ! Component: 200 - total flux cleaned = 4.70623e-06 Jy ! Total flux subtracted in 200 components = 4.70623e-06 Jy ! Clean residual min=-0.002334 max=0.001985 Jy/beam ! Clean residual mean=-0.000002 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.134703 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.134703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165667Jy sigma=0.000792 ! Fit after self-cal, rms=0.165667Jy sigma=0.000792 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165667Jy sigma=0.000792 ! Fit after self-cal, rms=0.164939Jy sigma=0.000792 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.687 mas, bmaj=20.71 mas, bpa=-0.7357 degrees ! Estimated noise=900.548 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000407462 Jy ! Component: 100 - total flux cleaned = 0.000391745 Jy ! Component: 150 - total flux cleaned = 0.000379754 Jy ! Component: 200 - total flux cleaned = 0.000369816 Jy ! Total flux subtracted in 200 components = 0.000369816 Jy ! Clean residual min=-0.002865 max=0.002135 Jy/beam ! Clean residual mean=-0.000005 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.135073 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 53 components and 0.135073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164938Jy sigma=0.000792 ! Fit after self-cal, rms=0.164940Jy sigma=0.000792 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.23159e-05 Jy ! Component: 100 - total flux cleaned = -2.16754e-05 Jy ! Component: 150 - total flux cleaned = -3.29154e-05 Jy ! Component: 200 - total flux cleaned = -4.17202e-05 Jy ! Total flux subtracted in 200 components = -4.17202e-05 Jy ! Clean residual min=-0.002871 max=0.002141 Jy/beam ! Clean residual mean=-0.000005 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.135031 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 55 components and 0.135031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164939Jy sigma=0.000792 ! Fit after self-cal, rms=0.164941Jy sigma=0.000792 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.891 mas, bmaj=7.806 mas, bpa=-5.456 degrees ! Estimated noise=679.953 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.891 x 7.806 at -5.456 degrees (North through East) ! Clean map min=-0.0022876 max=0.11379 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.335 mas, bmaj=6.277 mas, bpa=-5.412 degrees ! Estimated noise=956.881 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0871024 Jy ! Component: 100 - total flux cleaned = 0.108721 Jy ! Component: 150 - total flux cleaned = 0.117978 Jy ! Component: 200 - total flux cleaned = 0.123302 Jy ! Total flux subtracted in 200 components = 0.123302 Jy ! Clean residual min=-0.002929 max=0.002820 Jy/beam ! Clean residual mean=-0.000005 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.123302 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.123302 Jy ! Inverting map and beam ! Estimated beam: bmin=2.891 mas, bmaj=7.806 mas, bpa=-5.456 degrees ! Estimated noise=679.953 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00552053 Jy ! Component: 100 - total flux cleaned = 0.00825332 Jy ! Component: 150 - total flux cleaned = 0.00970019 Jy ! Component: 200 - total flux cleaned = 0.0104876 Jy ! Total flux subtracted in 200 components = 0.0104876 Jy ! Clean residual min=-0.002396 max=0.001954 Jy/beam ! Clean residual mean=-0.000004 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.133789 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 55 components and 0.133789 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.687 mas, bmaj=20.71 mas, bpa=-0.7357 degrees ! Estimated noise=900.548 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000785239 Jy ! Component: 100 - total flux cleaned = 0.000842222 Jy ! Component: 150 - total flux cleaned = 0.000850154 Jy ! Component: 200 - total flux cleaned = 0.00086477 Jy ! Total flux subtracted in 200 components = 0.00086477 Jy ! Clean residual min=-0.002853 max=0.002107 Jy/beam ! Clean residual mean=-0.000007 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.134654 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.28394e-05 Jy ! Component: 100 - total flux cleaned = 2.429e-05 Jy ! Component: 150 - total flux cleaned = 3.45362e-05 Jy ! Component: 200 - total flux cleaned = 3.93732e-05 Jy ! Total flux subtracted in 200 components = 3.93732e-05 Jy ! Clean residual min=-0.002846 max=0.002119 Jy/beam ! Clean residual mean=-0.000006 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.134693 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 58 components and 0.134693 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.891 mas, bmaj=7.806 mas, bpa=-5.456 degrees ! Estimated noise=679.953 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000278837 Jy ! Component: 100 - total flux cleaned = -0.000209774 Jy ! Component: 150 - total flux cleaned = -0.000158653 Jy ! Component: 200 - total flux cleaned = -0.000137969 Jy ! Total flux subtracted in 200 components = -0.000137969 Jy ! Clean residual min=-0.002353 max=0.001977 Jy/beam ! Clean residual mean=-0.000003 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.134555 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 67 components and 0.134555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164938Jy sigma=0.000792 ! Fit after self-cal, rms=0.164929Jy sigma=0.000792 wmodel J0301-3126_S_2015_01_23_pus_map.mod ! Writing 67 model components to file: J0301-3126_S_2015_01_23_pus_map.mod wobs J0301-3126_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0301-3126_S_2015_01_23_pus_uvs.fits wwins J0301-3126_S_2015_01_23_pus_map.win ! wwins: Wrote 1 windows to J0301-3126_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000876389 Jy ! Component: 100 - total flux cleaned = -0.000808774 Jy ! Component: 150 - total flux cleaned = -0.0004834 Jy ! Component: 200 - total flux cleaned = -0.000297075 Jy ! Component: 250 - total flux cleaned = -0.000357191 Jy ! Component: 300 - total flux cleaned = -0.000444628 Jy ! Component: 350 - total flux cleaned = -0.000530294 Jy ! Component: 400 - total flux cleaned = -0.000670368 Jy ! Component: 450 - total flux cleaned = -0.00083434 Jy ! Component: 500 - total flux cleaned = -0.00104914 Jy ! Component: 550 - total flux cleaned = -0.0012596 Jy ! Component: 600 - total flux cleaned = -0.00138894 Jy ! Component: 650 - total flux cleaned = -0.00164401 Jy ! Component: 700 - total flux cleaned = -0.00182021 Jy ! Component: 750 - total flux cleaned = -0.00206825 Jy ! Component: 800 - total flux cleaned = -0.00226344 Jy ! Component: 850 - total flux cleaned = -0.00245599 Jy ! Component: 900 - total flux cleaned = -0.00264588 Jy ! Component: 950 - total flux cleaned = -0.00280991 Jy ! Component: 1000 - total flux cleaned = -0.00297223 Jy ! Component: 1050 - total flux cleaned = -0.00322316 Jy ! Component: 1100 - total flux cleaned = -0.0033805 Jy ! Component: 1150 - total flux cleaned = -0.00360283 Jy ! Component: 1200 - total flux cleaned = -0.00375639 Jy ! Component: 1250 - total flux cleaned = -0.00386503 Jy ! Component: 1300 - total flux cleaned = -0.00403674 Jy ! Component: 1350 - total flux cleaned = -0.00422772 Jy ! Component: 1400 - total flux cleaned = -0.00437428 Jy ! Component: 1450 - total flux cleaned = -0.00449867 Jy ! Component: 1500 - total flux cleaned = -0.00464228 Jy ! Component: 1550 - total flux cleaned = -0.00478404 Jy ! Component: 1600 - total flux cleaned = -0.00486463 Jy ! Component: 1650 - total flux cleaned = -0.00494409 Jy ! Component: 1700 - total flux cleaned = -0.00508163 Jy ! Component: 1750 - total flux cleaned = -0.0052177 Jy ! Component: 1800 - total flux cleaned = -0.00521749 Jy ! Component: 1850 - total flux cleaned = -0.00529387 Jy ! Component: 1900 - total flux cleaned = -0.0054263 Jy ! Component: 1950 - total flux cleaned = -0.00550112 Jy ! Component: 2000 - total flux cleaned = -0.00550101 Jy ! Component: 2050 - total flux cleaned = -0.0055933 Jy ! Component: 2100 - total flux cleaned = -0.00561157 Jy ! Component: 2150 - total flux cleaned = -0.00564774 Jy ! Component: 2200 - total flux cleaned = -0.00562973 Jy ! Component: 2250 - total flux cleaned = -0.0056656 Jy ! Component: 2300 - total flux cleaned = -0.00571885 Jy ! Component: 2350 - total flux cleaned = -0.00577162 Jy ! Component: 2400 - total flux cleaned = -0.00582397 Jy ! Component: 2450 - total flux cleaned = -0.0058066 Jy ! Component: 2500 - total flux cleaned = -0.00589266 Jy ! Component: 2550 - total flux cleaned = -0.00589277 Jy ! Component: 2600 - total flux cleaned = -0.00597765 Jy ! Component: 2650 - total flux cleaned = -0.0060113 Jy ! Component: 2700 - total flux cleaned = -0.00606141 Jy ! Component: 2750 - total flux cleaned = -0.0061609 Jy ! Component: 2800 - total flux cleaned = -0.00621025 Jy ! Component: 2850 - total flux cleaned = -0.0062755 Jy ! Component: 2900 - total flux cleaned = -0.00627564 Jy ! Component: 2950 - total flux cleaned = -0.00635629 Jy ! Component: 3000 - total flux cleaned = -0.00643636 Jy ! Component: 3050 - total flux cleaned = -0.00646801 Jy ! Component: 3100 - total flux cleaned = -0.00648373 Jy ! Component: 3150 - total flux cleaned = -0.00649954 Jy ! Component: 3200 - total flux cleaned = -0.00656195 Jy ! Component: 3250 - total flux cleaned = -0.00660839 Jy ! Component: 3300 - total flux cleaned = -0.00670098 Jy ! Component: 3350 - total flux cleaned = -0.00667033 Jy ! Component: 3400 - total flux cleaned = -0.00673129 Jy ! Component: 3450 - total flux cleaned = -0.00673115 Jy ! Component: 3500 - total flux cleaned = -0.00680655 Jy ! Component: 3550 - total flux cleaned = -0.00682163 Jy ! Component: 3600 - total flux cleaned = -0.00692577 Jy ! Component: 3650 - total flux cleaned = -0.00691092 Jy ! Component: 3700 - total flux cleaned = -0.00692559 Jy ! Component: 3750 - total flux cleaned = -0.00698414 Jy ! Component: 3800 - total flux cleaned = -0.0069987 Jy ! Component: 3850 - total flux cleaned = -0.00707113 Jy ! Component: 3900 - total flux cleaned = -0.00711432 Jy ! Component: 3950 - total flux cleaned = -0.00714292 Jy ! Component: 4000 - total flux cleaned = -0.00718558 Jy ! Component: 4050 - total flux cleaned = -0.00721401 Jy ! Total flux subtracted in 4096 components = -0.00722821 Jy ! Clean residual min=-0.000893 max=0.001001 Jy/beam ! Clean residual mean=-0.000000 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.127327 Jy keep ! Adding 318 model components to the UV plane model. ! The established model now contains 385 components and 0.127327 Jy ![Exited script file: muppet] wmap "J0301-3126_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.891 x 7.806 at -5.456 degrees (North through East) ! Clean map min=-0.0016354 max=0.11479 Jy/beam ! Writing clean map to FITS file: J0301-3126_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.114793 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000264823 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.69209 0.69209 1.38418 2.76836 5.53672 11.0734 22.1469 44.2938 88.5875 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.114 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.891 x 7.806 at -5.456 degrees (North through East) ! Clean map min=-0.0016354 max=0.11479 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0301-3126_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:03:35 2017