! Started logfile: J0248+0434_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:15:11 2017 obs J0248+0434_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0248+0434_S_2014_01_04_pus_uva.fits ! AN table 1: 126 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0248+0434 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 10584 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0248+0434_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 252 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 252 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 252 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 252 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.972587Jy sigma=0.012675 ! Fit after self-cal, rms=0.926387Jy sigma=0.012182 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.979 mas, bmaj=5.517 mas, bpa=0.3437 degrees ! Estimated noise=855.653 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0572918 Jy ! Component: 100 - total flux cleaned = 0.0701011 Jy ! Total flux subtracted in 100 components = 0.0701011 Jy ! Clean residual min=-0.003643 max=0.004658 Jy/beam ! Clean residual mean=-0.000016 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.0701011 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0701011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084204Jy sigma=0.000912 ! Fit after self-cal, rms=0.083912Jy sigma=0.000910 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.658 mas, bmaj=6.568 mas, bpa=0.1621 degrees ! Estimated noise=554.652 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00793759 Jy ! Component: 100 - total flux cleaned = 0.0120484 Jy ! Component: 150 - total flux cleaned = 0.0145077 Jy ! Component: 200 - total flux cleaned = 0.0160382 Jy ! Total flux subtracted in 200 components = 0.0160382 Jy ! Clean residual min=-0.002579 max=0.002509 Jy/beam ! Clean residual mean=-0.000018 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.0861393 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 42 components and 0.0861393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083070Jy sigma=0.000901 ! Fit after self-cal, rms=0.082984Jy sigma=0.000901 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* KP 1.00* LA 1.06 ! MK 1.05 NL 0.98 OV 0.97 PT 1.02 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* KP 1.00* LA 1.03 ! MK 1.00 NL 1.01 OV 1.05 PT 0.99 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 1.00* KP 1.00* LA 0.81 ! MK 1.04 NL 0.96 OV 0.95 PT 0.99 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.00* KP 1.00* LA 0.91 ! MK 1.03 NL 1.08 OV 0.99 PT 1.01 ! SC 0.96 ! ! ! Fit before self-cal, rms=0.082984Jy sigma=0.000901 ! Fit after self-cal, rms=0.079708Jy sigma=0.000892 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.671 mas, bmaj=6.611 mas, bpa=0.7996 degrees ! Estimated noise=553.783 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000924528 Jy ! Component: 100 - total flux cleaned = 0.00101767 Jy ! Component: 150 - total flux cleaned = 0.0010795 Jy ! Component: 200 - total flux cleaned = 0.00113743 Jy ! Total flux subtracted in 200 components = 0.00113743 Jy ! Clean residual min=-0.002370 max=0.002272 Jy/beam ! Clean residual mean=-0.000007 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.0872767 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 45 components and 0.0872767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079690Jy sigma=0.000892 ! Fit after self-cal, rms=0.079570Jy sigma=0.000892 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079570Jy sigma=0.000892 ! Fit after self-cal, rms=0.078974Jy sigma=0.000889 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.667 mas, bmaj=6.596 mas, bpa=0.9997 degrees ! Estimated noise=554.362 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000590508 Jy ! Component: 100 - total flux cleaned = 0.000706496 Jy ! Component: 150 - total flux cleaned = 0.000742619 Jy ! Component: 200 - total flux cleaned = 0.000793691 Jy ! Total flux subtracted in 200 components = 0.000793691 Jy ! Clean residual min=-0.001688 max=0.001818 Jy/beam ! Clean residual mean=-0.000006 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0880704 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 46 components and 0.0880704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078960Jy sigma=0.000889 ! Fit after self-cal, rms=0.078945Jy sigma=0.000889 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-28.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123655 Jy ! Component: 100 - total flux cleaned = 0.00152246 Jy ! Component: 150 - total flux cleaned = 0.00173606 Jy ! Component: 200 - total flux cleaned = 0.00194553 Jy ! Total flux subtracted in 200 components = 0.00194553 Jy ! Clean residual min=-0.001518 max=0.001752 Jy/beam ! Clean residual mean=-0.000002 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.0900159 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 0.0900159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078897Jy sigma=0.000889 ! Fit after self-cal, rms=0.078936Jy sigma=0.000889 ! Inverting map ! Added new window around map position (124.5, -114). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000958326 Jy ! Component: 100 - total flux cleaned = 0.00145047 Jy ! Component: 150 - total flux cleaned = 0.00187138 Jy ! Component: 200 - total flux cleaned = 0.00212274 Jy ! Total flux subtracted in 200 components = 0.00212274 Jy ! Clean residual min=-0.001525 max=0.001368 Jy/beam ! Clean residual mean=-0.000006 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.0921387 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 0.0921387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078891Jy sigma=0.000888 ! Fit after self-cal, rms=0.078896Jy sigma=0.000888 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078896Jy sigma=0.000888 ! Fit after self-cal, rms=0.079260Jy sigma=0.000888 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.666 mas, bmaj=6.59 mas, bpa=0.9056 degrees ! Estimated noise=556.676 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00063102 Jy ! Component: 100 - total flux cleaned = 0.00105467 Jy ! Component: 150 - total flux cleaned = 0.00132046 Jy ! Component: 200 - total flux cleaned = 0.0015121 Jy ! Total flux subtracted in 200 components = 0.0015121 Jy ! Clean residual min=-0.001515 max=0.001368 Jy/beam ! Clean residual mean=-0.000005 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.0936508 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 82 components and 0.0936508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079238Jy sigma=0.000888 ! Fit after self-cal, rms=0.079259Jy sigma=0.000888 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000417884 Jy ! Component: 100 - total flux cleaned = 0.0005076 Jy ! Component: 150 - total flux cleaned = 0.000549149 Jy ! Component: 200 - total flux cleaned = 0.000587233 Jy ! Total flux subtracted in 200 components = 0.000587233 Jy ! Clean residual min=-0.001469 max=0.001312 Jy/beam ! Clean residual mean=-0.000004 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.094238 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 90 components and 0.094238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079248Jy sigma=0.000888 ! Fit after self-cal, rms=0.079255Jy sigma=0.000888 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079255Jy sigma=0.000888 ! Fit after self-cal, rms=0.079531Jy sigma=0.000887 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.602 mas, bmaj=10.97 mas, bpa=7.835 degrees ! Estimated noise=651.176 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00052069 Jy ! Component: 100 - total flux cleaned = 0.000671133 Jy ! Component: 150 - total flux cleaned = 0.000784628 Jy ! Component: 200 - total flux cleaned = 0.000913432 Jy ! Total flux subtracted in 200 components = 0.000913432 Jy ! Clean residual min=-0.001346 max=0.001190 Jy/beam ! Clean residual mean=-0.000006 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.0951514 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 104 components and 0.0951514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079525Jy sigma=0.000887 ! Fit after self-cal, rms=0.079545Jy sigma=0.000887 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.23435e-05 Jy ! Component: 100 - total flux cleaned = 5.2406e-06 Jy ! Component: 150 - total flux cleaned = 4.32427e-05 Jy ! Component: 200 - total flux cleaned = 5.48697e-05 Jy ! Total flux subtracted in 200 components = 5.48697e-05 Jy ! Clean residual min=-0.001273 max=0.001160 Jy/beam ! Clean residual mean=-0.000005 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.0952063 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 111 components and 0.0952063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079543Jy sigma=0.000887 ! Fit after self-cal, rms=0.079547Jy sigma=0.000887 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.664 mas, bmaj=6.585 mas, bpa=0.9413 degrees ! Estimated noise=558.722 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.664 x 6.585 at 0.9413 degrees (North through East) ! Clean map min=-0.001592 max=0.075514 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.973 mas, bmaj=5.516 mas, bpa=1.276 degrees ! Estimated noise=873.892 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0585577 Jy ! Component: 100 - total flux cleaned = 0.0723132 Jy ! Component: 150 - total flux cleaned = 0.0783758 Jy ! Component: 200 - total flux cleaned = 0.0816385 Jy ! Total flux subtracted in 200 components = 0.0816385 Jy ! Clean residual min=-0.003334 max=0.003715 Jy/beam ! Clean residual mean=-0.000008 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.0816385 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0816385 Jy ! Inverting map and beam ! Estimated beam: bmin=3.664 mas, bmaj=6.585 mas, bpa=0.9413 degrees ! Estimated noise=558.722 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00415493 Jy ! Component: 100 - total flux cleaned = 0.00668431 Jy ! Component: 150 - total flux cleaned = 0.00823194 Jy ! Component: 200 - total flux cleaned = 0.00946696 Jy ! Total flux subtracted in 200 components = 0.00946696 Jy ! Clean residual min=-0.001917 max=0.001727 Jy/beam ! Clean residual mean=-0.000013 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.0911054 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 42 components and 0.0911054 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.602 mas, bmaj=10.97 mas, bpa=7.835 degrees ! Estimated noise=651.176 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110085 Jy ! Component: 100 - total flux cleaned = 0.00164774 Jy ! Component: 150 - total flux cleaned = 0.00194923 Jy ! Component: 200 - total flux cleaned = 0.00229277 Jy ! Total flux subtracted in 200 components = 0.00229277 Jy ! Clean residual min=-0.001336 max=0.001135 Jy/beam ! Clean residual mean=-0.000012 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.0933982 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000326119 Jy ! Component: 100 - total flux cleaned = 0.000612795 Jy ! Component: 150 - total flux cleaned = 0.000829245 Jy ! Component: 200 - total flux cleaned = 0.00102402 Jy ! Total flux subtracted in 200 components = 0.00102402 Jy ! Clean residual min=-0.001297 max=0.001118 Jy/beam ! Clean residual mean=-0.000007 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.0944222 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 102 components and 0.0944223 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.664 mas, bmaj=6.585 mas, bpa=0.9413 degrees ! Estimated noise=558.722 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000342495 Jy ! Component: 100 - total flux cleaned = 0.000544374 Jy ! Component: 150 - total flux cleaned = 0.000776522 Jy ! Component: 200 - total flux cleaned = 0.000926151 Jy ! Total flux subtracted in 200 components = 0.000926151 Jy ! Clean residual min=-0.001541 max=0.001386 Jy/beam ! Clean residual mean=-0.000003 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.0953484 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 122 components and 0.0953484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079537Jy sigma=0.000887 ! Fit after self-cal, rms=0.079540Jy sigma=0.000887 wmodel J0248+0434_S_2014_01_04_pus_map.mod ! Writing 122 model components to file: J0248+0434_S_2014_01_04_pus_map.mod wobs J0248+0434_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0248+0434_S_2014_01_04_pus_uvs.fits wwins J0248+0434_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J0248+0434_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000300749 Jy ! Component: 100 - total flux cleaned = -0.000301169 Jy ! Component: 150 - total flux cleaned = -0.000300567 Jy ! Component: 200 - total flux cleaned = -0.000217771 Jy ! Component: 250 - total flux cleaned = -0.000117738 Jy ! Component: 300 - total flux cleaned = 7.54812e-05 Jy ! Component: 350 - total flux cleaned = 0.000262905 Jy ! Component: 400 - total flux cleaned = 0.000408852 Jy ! Component: 450 - total flux cleaned = 0.000515376 Jy ! Component: 500 - total flux cleaned = 0.000602587 Jy ! Component: 550 - total flux cleaned = 0.000721713 Jy ! Component: 600 - total flux cleaned = 0.000804905 Jy ! Component: 650 - total flux cleaned = 0.000886374 Jy ! Component: 700 - total flux cleaned = 0.000918352 Jy ! Component: 750 - total flux cleaned = 0.000965847 Jy ! Component: 800 - total flux cleaned = 0.0010431 Jy ! Component: 850 - total flux cleaned = 0.00110404 Jy ! Component: 900 - total flux cleaned = 0.00114898 Jy ! Component: 950 - total flux cleaned = 0.00117844 Jy ! Component: 1000 - total flux cleaned = 0.00122174 Jy ! Component: 1050 - total flux cleaned = 0.00125003 Jy ! Component: 1100 - total flux cleaned = 0.00127788 Jy ! Component: 1150 - total flux cleaned = 0.00129185 Jy ! Component: 1200 - total flux cleaned = 0.00138737 Jy ! Component: 1250 - total flux cleaned = 0.00137399 Jy ! Component: 1300 - total flux cleaned = 0.00144062 Jy ! Component: 1350 - total flux cleaned = 0.00146687 Jy ! Component: 1400 - total flux cleaned = 0.00148004 Jy ! Component: 1450 - total flux cleaned = 0.00153116 Jy ! Component: 1500 - total flux cleaned = 0.00153117 Jy ! Component: 1550 - total flux cleaned = 0.00150639 Jy ! Component: 1600 - total flux cleaned = 0.00153131 Jy ! Component: 1650 - total flux cleaned = 0.00151908 Jy ! Component: 1700 - total flux cleaned = 0.00156719 Jy ! Component: 1750 - total flux cleaned = 0.00151924 Jy ! Component: 1800 - total flux cleaned = 0.00147188 Jy ! Component: 1850 - total flux cleaned = 0.00144858 Jy ! Component: 1900 - total flux cleaned = 0.00142542 Jy ! Component: 1950 - total flux cleaned = 0.0014141 Jy ! Component: 2000 - total flux cleaned = 0.00143677 Jy ! Component: 2050 - total flux cleaned = 0.00139173 Jy ! Component: 2100 - total flux cleaned = 0.00134722 Jy ! Component: 2150 - total flux cleaned = 0.0013363 Jy ! Component: 2200 - total flux cleaned = 0.00131436 Jy ! Component: 2250 - total flux cleaned = 0.00130337 Jy ! Component: 2300 - total flux cleaned = 0.00126034 Jy ! Component: 2350 - total flux cleaned = 0.00123914 Jy ! Component: 2400 - total flux cleaned = 0.00118633 Jy ! Component: 2450 - total flux cleaned = 0.00117592 Jy ! Component: 2500 - total flux cleaned = 0.00116553 Jy ! Component: 2550 - total flux cleaned = 0.0010936 Jy ! Component: 2600 - total flux cleaned = 0.00111394 Jy ! Component: 2650 - total flux cleaned = 0.00107341 Jy ! Component: 2700 - total flux cleaned = 0.0010332 Jy ! Component: 2750 - total flux cleaned = 0.00100335 Jy ! Component: 2800 - total flux cleaned = 0.000973657 Jy ! Component: 2850 - total flux cleaned = 0.000934504 Jy ! Component: 2900 - total flux cleaned = 0.00093444 Jy ! Component: 2950 - total flux cleaned = 0.000895757 Jy ! Component: 3000 - total flux cleaned = 0.000867124 Jy ! Component: 3050 - total flux cleaned = 0.000848261 Jy ! Component: 3100 - total flux cleaned = 0.000810624 Jy ! Component: 3150 - total flux cleaned = 0.000773239 Jy ! Component: 3200 - total flux cleaned = 0.000763931 Jy ! Component: 3250 - total flux cleaned = 0.000736349 Jy ! Component: 3300 - total flux cleaned = 0.000681542 Jy ! Component: 3350 - total flux cleaned = 0.000654288 Jy ! Component: 3400 - total flux cleaned = 0.000600102 Jy ! Component: 3450 - total flux cleaned = 0.000546275 Jy ! Component: 3500 - total flux cleaned = 0.000537431 Jy ! Component: 3550 - total flux cleaned = 0.00046667 Jy ! Component: 3600 - total flux cleaned = 0.000431514 Jy ! Component: 3650 - total flux cleaned = 0.000414044 Jy ! Component: 3700 - total flux cleaned = 0.000370591 Jy ! Component: 3750 - total flux cleaned = 0.000318777 Jy ! Component: 3800 - total flux cleaned = 0.000284411 Jy ! Component: 3850 - total flux cleaned = 0.000250236 Jy ! Component: 3900 - total flux cleaned = 0.000216256 Jy ! Component: 3950 - total flux cleaned = 0.000199354 Jy ! Component: 4000 - total flux cleaned = 0.00014885 Jy ! Component: 4050 - total flux cleaned = 0.000115372 Jy ! Total flux subtracted in 4096 components = 8.19845e-05 Jy ! Clean residual min=-0.000482 max=0.000467 Jy/beam ! Clean residual mean=-0.000000 rms=0.000142 Jy/beam ! Combined flux in latest and established models = 0.0954304 Jy keep ! Adding 231 model components to the UV plane model. ! The established model now contains 353 components and 0.0954304 Jy ![Exited script file: muppet] wmap "J0248+0434_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.664 x 6.585 at 0.9413 degrees (North through East) ! Clean map min=-0.0010641 max=0.076238 Jy/beam ! Writing clean map to FITS file: J0248+0434_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0762381 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000139222 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.547844 0.547844 1.09569 2.19138 4.38275 8.7655 17.531 35.062 70.124 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.076 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.664 x 6.585 at 0.9413 degrees (North through East) ! Clean map min=-0.0010641 max=0.076238 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0248+0434_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:15:15 2017