! Started logfile: J0244+1320_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:15:06 2017 obs J0244+1320_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0244+1320_S_2014_01_04_pus_uva.fits ! AN table 1: 86 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0244+1320 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 7224 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0244+1320_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 172 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 172 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 172 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 172 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.894483Jy sigma=0.012769 ! Fit after self-cal, rms=0.878498Jy sigma=0.012514 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.056 mas, bmaj=5.554 mas, bpa=-0.1361 degrees ! Estimated noise=924.855 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.093764 Jy ! Component: 100 - total flux cleaned = 0.114325 Jy ! Total flux subtracted in 100 components = 0.114325 Jy ! Clean residual min=-0.004767 max=0.006294 Jy/beam ! Clean residual mean=-0.000015 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 0.114325 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.114325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076107Jy sigma=0.000924 ! Fit after self-cal, rms=0.076102Jy sigma=0.000924 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.654 mas, bmaj=6.264 mas, bpa=0.203 degrees ! Estimated noise=619.694 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00854545 Jy ! Component: 100 - total flux cleaned = 0.0125958 Jy ! Component: 150 - total flux cleaned = 0.0151863 Jy ! Component: 200 - total flux cleaned = 0.0169676 Jy ! Total flux subtracted in 200 components = 0.0169676 Jy ! Clean residual min=-0.003495 max=0.004481 Jy/beam ! Clean residual mean=-0.000018 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.131292 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 34 components and 0.131292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074934Jy sigma=0.000913 ! Fit after self-cal, rms=0.074963Jy sigma=0.000913 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* KP 1.00* LA 1.01 ! MK 0.99 NL 0.95 OV 0.98 PT 1.00 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00* KP 1.00* LA 1.00 ! MK 0.99 NL 1.02 OV 0.99 PT 1.02 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* KP 1.00* LA 0.82 ! MK 1.03 NL 0.96 OV 0.94 PT 0.92 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* KP 1.00* LA 0.88 ! MK 1.04 NL 1.07 OV 0.99 PT 1.03 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.074963Jy sigma=0.000913 ! Fit after self-cal, rms=0.072424Jy sigma=0.000896 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.666 mas, bmaj=6.344 mas, bpa=0.3412 degrees ! Estimated noise=620.066 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000669295 Jy ! Component: 100 - total flux cleaned = -0.000670088 Jy ! Component: 150 - total flux cleaned = -0.000699758 Jy ! Component: 200 - total flux cleaned = -0.000699277 Jy ! Total flux subtracted in 200 components = -0.000699277 Jy ! Clean residual min=-0.002041 max=0.002049 Jy/beam ! Clean residual mean=-0.000004 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.130593 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 0.130593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072391Jy sigma=0.000896 ! Fit after self-cal, rms=0.072183Jy sigma=0.000896 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072183Jy sigma=0.000896 ! Fit after self-cal, rms=0.072476Jy sigma=0.000895 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.668 mas, bmaj=6.343 mas, bpa=0.2068 degrees ! Estimated noise=620.411 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107452 Jy ! Component: 100 - total flux cleaned = -0.000126638 Jy ! Component: 150 - total flux cleaned = -0.000159183 Jy ! Component: 200 - total flux cleaned = -0.000189981 Jy ! Total flux subtracted in 200 components = -0.000189981 Jy ! Clean residual min=-0.001723 max=0.001769 Jy/beam ! Clean residual mean=-0.000002 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.130403 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.130403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072466Jy sigma=0.000894 ! Fit after self-cal, rms=0.072467Jy sigma=0.000894 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.29947e-05 Jy ! Component: 100 - total flux cleaned = -9.22148e-05 Jy ! Component: 150 - total flux cleaned = -0.000129102 Jy ! Component: 200 - total flux cleaned = -0.000163933 Jy ! Total flux subtracted in 200 components = -0.000163933 Jy ! Clean residual min=-0.001693 max=0.001811 Jy/beam ! Clean residual mean=-0.000002 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.130239 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 0.130239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072461Jy sigma=0.000894 ! Fit after self-cal, rms=0.072466Jy sigma=0.000894 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072466Jy sigma=0.000894 ! Fit after self-cal, rms=0.072448Jy sigma=0.000894 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.668 mas, bmaj=6.349 mas, bpa=0.1907 degrees ! Estimated noise=621.007 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.81145e-05 Jy ! Component: 100 - total flux cleaned = -7.21468e-05 Jy ! Component: 150 - total flux cleaned = -0.000109264 Jy ! Component: 200 - total flux cleaned = -0.00014433 Jy ! Total flux subtracted in 200 components = -0.00014433 Jy ! Clean residual min=-0.001687 max=0.001774 Jy/beam ! Clean residual mean=-0.000002 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.130095 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 54 components and 0.130095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072442Jy sigma=0.000894 ! Fit after self-cal, rms=0.072433Jy sigma=0.000894 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.39192e-05 Jy ! Component: 100 - total flux cleaned = -7.48166e-05 Jy ! Component: 150 - total flux cleaned = -0.00011225 Jy ! Component: 200 - total flux cleaned = -0.000138408 Jy ! Total flux subtracted in 200 components = -0.000138408 Jy ! Clean residual min=-0.001671 max=0.001807 Jy/beam ! Clean residual mean=-0.000002 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.129956 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 54 components and 0.129956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072429Jy sigma=0.000894 ! Fit after self-cal, rms=0.072433Jy sigma=0.000894 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072433Jy sigma=0.000894 ! Fit after self-cal, rms=0.072424Jy sigma=0.000894 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.487 mas, bmaj=10.58 mas, bpa=5.71 degrees ! Estimated noise=718.881 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.60824e-05 Jy ! Component: 100 - total flux cleaned = -4.22345e-05 Jy ! Component: 150 - total flux cleaned = -3.54748e-05 Jy ! Component: 200 - total flux cleaned = -2.92952e-05 Jy ! Total flux subtracted in 200 components = -2.92952e-05 Jy ! Clean residual min=-0.001579 max=0.001750 Jy/beam ! Clean residual mean=-0.000004 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.129927 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 57 components and 0.129927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072427Jy sigma=0.000894 ! Fit after self-cal, rms=0.072417Jy sigma=0.000894 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.61978e-05 Jy ! Component: 100 - total flux cleaned = -1.50397e-05 Jy ! Component: 150 - total flux cleaned = -1.51293e-05 Jy ! Component: 200 - total flux cleaned = -1.51746e-05 Jy ! Total flux subtracted in 200 components = -1.51746e-05 Jy ! Clean residual min=-0.001562 max=0.001747 Jy/beam ! Clean residual mean=-0.000004 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.129912 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 59 components and 0.129912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072418Jy sigma=0.000894 ! Fit after self-cal, rms=0.072419Jy sigma=0.000894 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.667 mas, bmaj=6.354 mas, bpa=0.1899 degrees ! Estimated noise=621.473 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.667 x 6.354 at 0.1899 degrees (North through East) ! Clean map min=-0.0016007 max=0.12208 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.053 mas, bmaj=5.595 mas, bpa=0.1188 degrees ! Estimated noise=938.623 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.095168 Jy ! Component: 100 - total flux cleaned = 0.116069 Jy ! Component: 150 - total flux cleaned = 0.122524 Jy ! Component: 200 - total flux cleaned = 0.125586 Jy ! Total flux subtracted in 200 components = 0.125586 Jy ! Clean residual min=-0.003262 max=0.002965 Jy/beam ! Clean residual mean=-0.000002 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.125586 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.125586 Jy ! Inverting map and beam ! Estimated beam: bmin=3.667 mas, bmaj=6.354 mas, bpa=0.1899 degrees ! Estimated noise=621.473 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181445 Jy ! Component: 100 - total flux cleaned = 0.00209864 Jy ! Component: 150 - total flux cleaned = 0.00238067 Jy ! Component: 200 - total flux cleaned = 0.00258764 Jy ! Total flux subtracted in 200 components = 0.00258764 Jy ! Clean residual min=-0.001761 max=0.001956 Jy/beam ! Clean residual mean=-0.000004 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.128174 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 26 components and 0.128174 Jy ! Inverting map ! Added new window around map position (-87, 51.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125192 Jy ! Component: 100 - total flux cleaned = 0.00139853 Jy ! Component: 150 - total flux cleaned = 0.00148522 Jy ! Component: 200 - total flux cleaned = 0.00158628 Jy ! Total flux subtracted in 200 components = 0.00158628 Jy ! Clean residual min=-0.001862 max=0.001631 Jy/beam ! Clean residual mean=-0.000002 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.12976 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 0.12976 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.487 mas, bmaj=10.58 mas, bpa=5.71 degrees ! Estimated noise=718.881 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000527737 Jy ! Component: 100 - total flux cleaned = 0.000708299 Jy ! Component: 150 - total flux cleaned = 0.000839267 Jy ! Component: 200 - total flux cleaned = 0.000948499 Jy ! Total flux subtracted in 200 components = 0.000948499 Jy ! Clean residual min=-0.001604 max=0.001320 Jy/beam ! Clean residual mean=-0.000001 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.130708 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.06101e-05 Jy ! Component: 100 - total flux cleaned = 0.000145705 Jy ! Component: 150 - total flux cleaned = 0.000174414 Jy ! Component: 200 - total flux cleaned = 0.000191191 Jy ! Total flux subtracted in 200 components = 0.000191191 Jy ! Clean residual min=-0.001619 max=0.001311 Jy/beam ! Clean residual mean=-0.000000 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.1309 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 55 components and 0.1309 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.667 mas, bmaj=6.354 mas, bpa=0.1899 degrees ! Estimated noise=621.473 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000136925 Jy ! Component: 100 - total flux cleaned = -0.000180632 Jy ! Component: 150 - total flux cleaned = -0.000200197 Jy ! Component: 200 - total flux cleaned = -0.000183105 Jy ! Total flux subtracted in 200 components = -0.000183105 Jy ! Clean residual min=-0.001824 max=0.001611 Jy/beam ! Clean residual mean=-0.000000 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.130717 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 66 components and 0.130717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072369Jy sigma=0.000894 ! Fit after self-cal, rms=0.072356Jy sigma=0.000894 wmodel J0244+1320_S_2014_01_04_pus_map.mod ! Writing 66 model components to file: J0244+1320_S_2014_01_04_pus_map.mod wobs J0244+1320_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0244+1320_S_2014_01_04_pus_uvs.fits wwins J0244+1320_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J0244+1320_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000629783 Jy ! Component: 100 - total flux cleaned = -0.000629845 Jy ! Component: 150 - total flux cleaned = -0.000654988 Jy ! Component: 200 - total flux cleaned = -0.000731005 Jy ! Component: 250 - total flux cleaned = -0.000731292 Jy ! Component: 300 - total flux cleaned = -0.000732214 Jy ! Component: 350 - total flux cleaned = -0.000755196 Jy ! Component: 400 - total flux cleaned = -0.000711435 Jy ! Component: 450 - total flux cleaned = -0.000690313 Jy ! Component: 500 - total flux cleaned = -0.000669876 Jy ! Component: 550 - total flux cleaned = -0.00066977 Jy ! Component: 600 - total flux cleaned = -0.000629376 Jy ! Component: 650 - total flux cleaned = -0.000570405 Jy ! Component: 700 - total flux cleaned = -0.00051267 Jy ! Component: 750 - total flux cleaned = -0.00047487 Jy ! Component: 800 - total flux cleaned = -0.000400952 Jy ! Component: 850 - total flux cleaned = -0.000346483 Jy ! Component: 900 - total flux cleaned = -0.000274925 Jy ! Component: 950 - total flux cleaned = -0.000204707 Jy ! Component: 1000 - total flux cleaned = -0.000135513 Jy ! Component: 1050 - total flux cleaned = -8.46573e-05 Jy ! Component: 1100 - total flux cleaned = -1.76728e-05 Jy ! Component: 1150 - total flux cleaned = 1.52343e-05 Jy ! Component: 1200 - total flux cleaned = 8.05819e-05 Jy ! Component: 1250 - total flux cleaned = 0.000144894 Jy ! Component: 1300 - total flux cleaned = 0.000176556 Jy ! Component: 1350 - total flux cleaned = 0.000239019 Jy ! Component: 1400 - total flux cleaned = 0.000346721 Jy ! Component: 1450 - total flux cleaned = 0.000346787 Jy ! Component: 1500 - total flux cleaned = 0.000421676 Jy ! Component: 1550 - total flux cleaned = 0.00045138 Jy ! Component: 1600 - total flux cleaned = 0.000480668 Jy ! Component: 1650 - total flux cleaned = 0.000538381 Jy ! Component: 1700 - total flux cleaned = 0.000538369 Jy ! Component: 1750 - total flux cleaned = 0.000580597 Jy ! Component: 1800 - total flux cleaned = 0.000580534 Jy ! Component: 1850 - total flux cleaned = 0.000608096 Jy ! Component: 1900 - total flux cleaned = 0.000675897 Jy ! Component: 1950 - total flux cleaned = 0.000689217 Jy ! Component: 2000 - total flux cleaned = 0.000742362 Jy ! Component: 2050 - total flux cleaned = 0.000729176 Jy ! Component: 2100 - total flux cleaned = 0.000794445 Jy ! Component: 2150 - total flux cleaned = 0.000846047 Jy ! Component: 2200 - total flux cleaned = 0.000884306 Jy ! Component: 2250 - total flux cleaned = 0.00089697 Jy ! Component: 2300 - total flux cleaned = 0.000959776 Jy ! Component: 2350 - total flux cleaned = 0.000972297 Jy ! Component: 2400 - total flux cleaned = 0.00100924 Jy ! Component: 2450 - total flux cleaned = 0.00104604 Jy ! Component: 2500 - total flux cleaned = 0.00110665 Jy ! Component: 2550 - total flux cleaned = 0.00116659 Jy ! Component: 2600 - total flux cleaned = 0.00119032 Jy ! Component: 2650 - total flux cleaned = 0.00120202 Jy ! Component: 2700 - total flux cleaned = 0.00124875 Jy ! Component: 2750 - total flux cleaned = 0.00127195 Jy ! Component: 2800 - total flux cleaned = 0.00129487 Jy ! Component: 2850 - total flux cleaned = 0.00132906 Jy ! Component: 2900 - total flux cleaned = 0.0013629 Jy ! Component: 2950 - total flux cleaned = 0.00138524 Jy ! Component: 3000 - total flux cleaned = 0.00139639 Jy ! Component: 3050 - total flux cleaned = 0.00145173 Jy ! Component: 3100 - total flux cleaned = 0.00146273 Jy ! Component: 3150 - total flux cleaned = 0.00149546 Jy ! Component: 3200 - total flux cleaned = 0.00150627 Jy ! Component: 3250 - total flux cleaned = 0.00156005 Jy ! Component: 3300 - total flux cleaned = 0.00160276 Jy ! Component: 3350 - total flux cleaned = 0.00162393 Jy ! Component: 3400 - total flux cleaned = 0.00163443 Jy ! Component: 3450 - total flux cleaned = 0.00169722 Jy ! Component: 3500 - total flux cleaned = 0.00170773 Jy ! Component: 3550 - total flux cleaned = 0.00172847 Jy ! Component: 3600 - total flux cleaned = 0.00174914 Jy ! Component: 3650 - total flux cleaned = 0.00180018 Jy ! Component: 3700 - total flux cleaned = 0.00182046 Jy ! Component: 3750 - total flux cleaned = 0.00184067 Jy ! Component: 3800 - total flux cleaned = 0.00187083 Jy ! Component: 3850 - total flux cleaned = 0.00192071 Jy ! Component: 3900 - total flux cleaned = 0.00193066 Jy ! Component: 3950 - total flux cleaned = 0.00193061 Jy ! Component: 4000 - total flux cleaned = 0.00196013 Jy ! Component: 4050 - total flux cleaned = 0.00196989 Jy ! Total flux subtracted in 4096 components = 0.00197964 Jy ! Clean residual min=-0.000526 max=0.000681 Jy/beam ! Clean residual mean=0.000002 rms=0.000167 Jy/beam ! Combined flux in latest and established models = 0.132696 Jy keep ! Adding 239 model components to the UV plane model. ! The established model now contains 305 components and 0.132696 Jy ![Exited script file: muppet] wmap "J0244+1320_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.667 x 6.354 at 0.1899 degrees (North through East) ! Clean map min=-0.0015065 max=0.12289 Jy/beam ! Writing clean map to FITS file: J0244+1320_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.122895 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000167865 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.409777 0.409777 0.819553 1.63911 3.27821 6.55643 13.1129 26.2257 52.4514 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.122 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.667 x 6.354 at 0.1899 degrees (North through East) ! Clean map min=-0.0015065 max=0.12289 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0244+1320_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:15:11 2017