! Started logfile: J0242-2132_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:03:13 2017 obs J0242-2132_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0242-2132_S_2015_01_23_pus_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.965302 visibilities/baseline/integration-bin. ! Found source: J0242-2132 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 9904 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0242-2132_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.711920Jy sigma=0.006356 ! Fit after self-cal, rms=0.693872Jy sigma=0.006168 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.502 mas, bmaj=6.583 mas, bpa=-6.344 degrees ! Estimated noise=1130.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.24188 Jy ! Component: 100 - total flux cleaned = 0.322428 Jy ! Total flux subtracted in 100 components = 0.322428 Jy ! Clean residual min=-0.028247 max=0.057364 Jy/beam ! Clean residual mean=0.000068 rms=0.008819 Jy/beam ! Combined flux in latest and established models = 0.322428 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.322428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.268543Jy sigma=0.002166 ! Fit after self-cal, rms=0.268613Jy sigma=0.002165 ! Inverting map ! Added new window around map position (-9, -3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0576979 Jy ! Component: 100 - total flux cleaned = 0.0993704 Jy ! Total flux subtracted in 100 components = 0.0993704 Jy ! Clean residual min=-0.025716 max=0.052119 Jy/beam ! Clean residual mean=0.000061 rms=0.007356 Jy/beam ! Combined flux in latest and established models = 0.421798 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 55 components and 0.421798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241872Jy sigma=0.001853 ! Fit after self-cal, rms=0.240152Jy sigma=0.001837 ! Inverting map ! Added new window around map position (6.5, 3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0452787 Jy ! Component: 100 - total flux cleaned = 0.0785907 Jy ! Total flux subtracted in 100 components = 0.0785907 Jy ! Clean residual min=-0.020230 max=0.027871 Jy/beam ! Clean residual mean=0.000055 rms=0.005999 Jy/beam ! Combined flux in latest and established models = 0.500389 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 76 components and 0.500389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222480Jy sigma=0.001616 ! Fit after self-cal, rms=0.222392Jy sigma=0.001614 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=7.568 mas, bpa=-6.685 degrees ! Estimated noise=823.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0633136 Jy ! Component: 100 - total flux cleaned = 0.109698 Jy ! Component: 150 - total flux cleaned = 0.145667 Jy ! Component: 200 - total flux cleaned = 0.174033 Jy ! Total flux subtracted in 200 components = 0.174033 Jy ! Clean residual min=-0.020506 max=0.031438 Jy/beam ! Clean residual mean=-0.000000 rms=0.008139 Jy/beam ! Combined flux in latest and established models = 0.674422 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 126 components and 0.674422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201427Jy sigma=0.001259 ! Fit after self-cal, rms=0.201253Jy sigma=0.001256 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.66 HN 1.10 KP 1.03 ! LA 0.93 MK 1.04 NL 1.09 OV 0.88 ! PT 0.87 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.97 HN 1.17 KP 0.96 ! LA 0.91 MK 1.02 NL 1.29 OV 0.91 ! PT 0.87 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 2.12 HN 1.13 KP 0.83 ! LA 0.74 MK 1.05 NL 1.22 OV 0.85 ! PT 0.86 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.93 HN 1.11 KP 0.78 ! LA 0.78 MK 1.06 NL 0.95 OV 0.91 ! PT 0.90 SC 1.03 ! ! ! Fit before self-cal, rms=0.201253Jy sigma=0.001256 ! Fit after self-cal, rms=0.299238Jy sigma=0.000955 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.062 mas, bmaj=7.734 mas, bpa=-6.52 degrees ! Estimated noise=823.254 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124366 Jy ! Component: 100 - total flux cleaned = 0.0141798 Jy ! Component: 150 - total flux cleaned = 0.0150732 Jy ! Component: 200 - total flux cleaned = 0.0153428 Jy ! Total flux subtracted in 200 components = 0.0153428 Jy ! Clean residual min=-0.012975 max=0.020629 Jy/beam ! Clean residual mean=-0.000072 rms=0.004029 Jy/beam ! Combined flux in latest and established models = 0.689765 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 139 components and 0.689765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.297981Jy sigma=0.000934 ! Fit after self-cal, rms=0.298379Jy sigma=0.000932 ! Inverting map ! Added new window around map position (-12.5, -22.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.019471 Jy ! Component: 100 - total flux cleaned = 0.0299278 Jy ! Component: 150 - total flux cleaned = 0.0364277 Jy ! Component: 200 - total flux cleaned = 0.0397678 Jy ! Total flux subtracted in 200 components = 0.0397678 Jy ! Clean residual min=-0.011244 max=0.011619 Jy/beam ! Clean residual mean=-0.000052 rms=0.003192 Jy/beam ! Combined flux in latest and established models = 0.729533 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 181 components and 0.729533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296925Jy sigma=0.000890 ! Fit after self-cal, rms=0.296730Jy sigma=0.000885 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296730Jy sigma=0.000885 ! Fit after self-cal, rms=0.295847Jy sigma=0.000856 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.045 mas, bmaj=7.689 mas, bpa=-6.389 degrees ! Estimated noise=831.051 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00996247 Jy ! Component: 100 - total flux cleaned = 0.016111 Jy ! Component: 150 - total flux cleaned = 0.0209211 Jy ! Component: 200 - total flux cleaned = 0.0232154 Jy ! Total flux subtracted in 200 components = 0.0232154 Jy ! Clean residual min=-0.008956 max=0.009753 Jy/beam ! Clean residual mean=-0.000031 rms=0.002439 Jy/beam ! Combined flux in latest and established models = 0.752748 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 203 components and 0.752748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294855Jy sigma=0.000847 ! Fit after self-cal, rms=0.294766Jy sigma=0.000845 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00387008 Jy ! Component: 100 - total flux cleaned = 0.00503003 Jy ! Component: 150 - total flux cleaned = 0.00599026 Jy ! Component: 200 - total flux cleaned = 0.00682518 Jy ! Total flux subtracted in 200 components = 0.00682518 Jy ! Clean residual min=-0.009149 max=0.009115 Jy/beam ! Clean residual mean=-0.000029 rms=0.002299 Jy/beam ! Combined flux in latest and established models = 0.759574 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 217 components and 0.759574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294382Jy sigma=0.000841 ! Fit after self-cal, rms=0.294305Jy sigma=0.000840 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294305Jy sigma=0.000840 ! Fit after self-cal, rms=0.241297Jy sigma=0.000823 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.037 mas, bmaj=7.672 mas, bpa=-6.485 degrees ! Estimated noise=827.925 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117918 Jy ! Component: 100 - total flux cleaned = -0.000429524 Jy ! Component: 150 - total flux cleaned = -0.000227164 Jy ! Component: 200 - total flux cleaned = -0.000231589 Jy ! Total flux subtracted in 200 components = -0.000231589 Jy ! Clean residual min=-0.006488 max=0.007433 Jy/beam ! Clean residual mean=0.000004 rms=0.001738 Jy/beam ! Combined flux in latest and established models = 0.759342 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 237 components and 0.759342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241162Jy sigma=0.000820 ! Fit after self-cal, rms=0.241004Jy sigma=0.000819 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-35.5, 23.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00645449 Jy ! Component: 100 - total flux cleaned = 0.00727303 Jy ! Component: 150 - total flux cleaned = 0.00824457 Jy ! Component: 200 - total flux cleaned = 0.00855486 Jy ! Total flux subtracted in 200 components = 0.00855486 Jy ! Clean residual min=-0.006538 max=0.007105 Jy/beam ! Clean residual mean=0.000005 rms=0.001557 Jy/beam ! Combined flux in latest and established models = 0.767897 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 264 components and 0.767897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240779Jy sigma=0.000813 ! Fit after self-cal, rms=0.240740Jy sigma=0.000813 ! Inverting map ! Added new window around map position (-27.5, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0060994 Jy ! Component: 100 - total flux cleaned = 0.00868595 Jy ! Component: 150 - total flux cleaned = 0.00946336 Jy ! Component: 200 - total flux cleaned = 0.00995738 Jy ! Total flux subtracted in 200 components = 0.00995738 Jy ! Clean residual min=-0.006041 max=0.005255 Jy/beam ! Clean residual mean=0.000011 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 0.777854 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 285 components and 0.777854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240586Jy sigma=0.000808 ! Fit after self-cal, rms=0.240563Jy sigma=0.000808 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240563Jy sigma=0.000808 ! Fit after self-cal, rms=0.240564Jy sigma=0.000808 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.485 mas, bmaj=16.41 mas, bpa=-4.585 degrees ! Estimated noise=1086.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151106 Jy ! Component: 100 - total flux cleaned = -3.90052e-05 Jy ! Component: 150 - total flux cleaned = -3.9032e-05 Jy ! Component: 200 - total flux cleaned = -0.000131617 Jy ! Total flux subtracted in 200 components = -0.000131617 Jy ! Clean residual min=-0.007543 max=0.007583 Jy/beam ! Clean residual mean=0.000017 rms=0.002090 Jy/beam ! Combined flux in latest and established models = 0.777723 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 311 components and 0.777723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240477Jy sigma=0.000807 ! Fit after self-cal, rms=0.240471Jy sigma=0.000807 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.38678e-05 Jy ! Component: 100 - total flux cleaned = 8.61051e-05 Jy ! Component: 150 - total flux cleaned = -8.8885e-05 Jy ! Component: 200 - total flux cleaned = -0.000252112 Jy ! Total flux subtracted in 200 components = -0.000252112 Jy ! Clean residual min=-0.007229 max=0.007417 Jy/beam ! Clean residual mean=0.000017 rms=0.001995 Jy/beam ! Combined flux in latest and established models = 0.777471 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 319 components and 0.777471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240433Jy sigma=0.000806 ! Fit after self-cal, rms=0.240426Jy sigma=0.000806 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.03 mas, bmaj=7.667 mas, bpa=-6.562 degrees ! Estimated noise=824.422 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.03 x 7.667 at -6.562 degrees (North through East) ! Clean map min=-0.0058988 max=0.3112 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.522 mas, bmaj=6.577 mas, bpa=-5.943 degrees ! Estimated noise=1149.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.24469 Jy ! Component: 100 - total flux cleaned = 0.333589 Jy ! Component: 150 - total flux cleaned = 0.392851 Jy ! Component: 200 - total flux cleaned = 0.439323 Jy ! Total flux subtracted in 200 components = 0.439323 Jy ! Clean residual min=-0.016987 max=0.031038 Jy/beam ! Clean residual mean=0.000036 rms=0.005549 Jy/beam ! Combined flux in latest and established models = 0.439323 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.439323 Jy ! Inverting map and beam ! Estimated beam: bmin=3.03 mas, bmaj=7.667 mas, bpa=-6.562 degrees ! Estimated noise=824.422 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0717168 Jy ! Component: 100 - total flux cleaned = 0.121309 Jy ! Component: 150 - total flux cleaned = 0.158191 Jy ! Component: 200 - total flux cleaned = 0.186672 Jy ! Total flux subtracted in 200 components = 0.186672 Jy ! Clean residual min=-0.012266 max=0.017667 Jy/beam ! Clean residual mean=-0.000022 rms=0.004643 Jy/beam ! Combined flux in latest and established models = 0.625994 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 134 components and 0.625995 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.485 mas, bmaj=16.41 mas, bpa=-4.585 degrees ! Estimated noise=1086.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0412484 Jy ! Component: 100 - total flux cleaned = 0.0678091 Jy ! Component: 150 - total flux cleaned = 0.0864859 Jy ! Component: 200 - total flux cleaned = 0.100729 Jy ! Total flux subtracted in 200 components = 0.100729 Jy ! Clean residual min=-0.011612 max=0.010746 Jy/beam ! Clean residual mean=-0.000018 rms=0.003644 Jy/beam ! Combined flux in latest and established models = 0.726724 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110648 Jy ! Component: 100 - total flux cleaned = 0.0199325 Jy ! Component: 150 - total flux cleaned = 0.0271594 Jy ! Component: 200 - total flux cleaned = 0.0331068 Jy ! Total flux subtracted in 200 components = 0.0331068 Jy ! Clean residual min=-0.009005 max=0.007522 Jy/beam ! Clean residual mean=0.000001 rms=0.002374 Jy/beam ! Combined flux in latest and established models = 0.759831 Jy ! Adding 133 model components to the UV plane model. ! The established model now contains 248 components and 0.759831 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.03 mas, bmaj=7.667 mas, bpa=-6.562 degrees ! Estimated noise=824.422 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00652897 Jy ! Component: 100 - total flux cleaned = 0.00922756 Jy ! Component: 150 - total flux cleaned = 0.010611 Jy ! Component: 200 - total flux cleaned = 0.0120536 Jy ! Total flux subtracted in 200 components = 0.0120536 Jy ! Clean residual min=-0.005778 max=0.006409 Jy/beam ! Clean residual mean=0.000004 rms=0.001441 Jy/beam ! Combined flux in latest and established models = 0.771884 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 278 components and 0.771884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240594Jy sigma=0.000813 ! Fit after self-cal, rms=0.240485Jy sigma=0.000811 wmodel J0242-2132_S_2015_01_23_pus_map.mod ! Writing 278 model components to file: J0242-2132_S_2015_01_23_pus_map.mod wobs J0242-2132_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0242-2132_S_2015_01_23_pus_uvs.fits wwins J0242-2132_S_2015_01_23_pus_map.win ! wwins: Wrote 7 windows to J0242-2132_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000822156 Jy ! Component: 100 - total flux cleaned = 0.00132068 Jy ! Component: 150 - total flux cleaned = 0.00159809 Jy ! Component: 200 - total flux cleaned = 0.00186235 Jy ! Component: 250 - total flux cleaned = 0.00245699 Jy ! Component: 300 - total flux cleaned = 0.00286398 Jy ! Component: 350 - total flux cleaned = 0.00325238 Jy ! Component: 400 - total flux cleaned = 0.00347824 Jy ! Component: 450 - total flux cleaned = 0.00362584 Jy ! Component: 500 - total flux cleaned = 0.00398104 Jy ! Component: 550 - total flux cleaned = 0.00439101 Jy ! Component: 600 - total flux cleaned = 0.00465673 Jy ! Component: 650 - total flux cleaned = 0.00524484 Jy ! Component: 700 - total flux cleaned = 0.00575567 Jy ! Component: 750 - total flux cleaned = 0.00637775 Jy ! Component: 800 - total flux cleaned = 0.00680423 Jy ! Component: 850 - total flux cleaned = 0.00721974 Jy ! Component: 900 - total flux cleaned = 0.00745245 Jy ! Component: 950 - total flux cleaned = 0.00785393 Jy ! Component: 1000 - total flux cleaned = 0.00813614 Jy ! Component: 1050 - total flux cleaned = 0.00841189 Jy ! Component: 1100 - total flux cleaned = 0.00857449 Jy ! Component: 1150 - total flux cleaned = 0.0088409 Jy ! Component: 1200 - total flux cleaned = 0.00889297 Jy ! Component: 1250 - total flux cleaned = 0.00904812 Jy ! Component: 1300 - total flux cleaned = 0.0092517 Jy ! Component: 1350 - total flux cleaned = 0.00935134 Jy ! Component: 1400 - total flux cleaned = 0.00959709 Jy ! Component: 1450 - total flux cleaned = 0.00969332 Jy ! Component: 1500 - total flux cleaned = 0.00983541 Jy ! Component: 1550 - total flux cleaned = 0.0100697 Jy ! Component: 1600 - total flux cleaned = 0.0102071 Jy ! Component: 1650 - total flux cleaned = 0.0105252 Jy ! Component: 1700 - total flux cleaned = 0.01066 Jy ! Component: 1750 - total flux cleaned = 0.0108378 Jy ! Component: 1800 - total flux cleaned = 0.0109265 Jy ! Component: 1850 - total flux cleaned = 0.011359 Jy ! Component: 1900 - total flux cleaned = 0.0114012 Jy ! Component: 1950 - total flux cleaned = 0.0116537 Jy ! Component: 2000 - total flux cleaned = 0.0116954 Jy ! Component: 2050 - total flux cleaned = 0.0119007 Jy ! Component: 2100 - total flux cleaned = 0.0119005 Jy ! Component: 2150 - total flux cleaned = 0.0120612 Jy ! Component: 2200 - total flux cleaned = 0.012101 Jy ! Component: 2250 - total flux cleaned = 0.0122186 Jy ! Component: 2300 - total flux cleaned = 0.0123348 Jy ! Component: 2350 - total flux cleaned = 0.0123729 Jy ! Component: 2400 - total flux cleaned = 0.0126001 Jy ! Component: 2450 - total flux cleaned = 0.0127123 Jy ! Component: 2500 - total flux cleaned = 0.0127864 Jy ! Component: 2550 - total flux cleaned = 0.012896 Jy ! Component: 2600 - total flux cleaned = 0.013004 Jy ! Component: 2650 - total flux cleaned = 0.0131831 Jy ! Component: 2700 - total flux cleaned = 0.0132542 Jy ! Component: 2750 - total flux cleaned = 0.0131837 Jy ! Component: 2800 - total flux cleaned = 0.0133223 Jy ! Component: 2850 - total flux cleaned = 0.0134254 Jy ! Component: 2900 - total flux cleaned = 0.0134256 Jy ! Component: 2950 - total flux cleaned = 0.0135941 Jy ! Component: 3000 - total flux cleaned = 0.0136272 Jy ! Component: 3050 - total flux cleaned = 0.0137594 Jy ! Component: 3100 - total flux cleaned = 0.0136942 Jy ! Component: 3150 - total flux cleaned = 0.0139536 Jy ! Component: 3200 - total flux cleaned = 0.0139217 Jy ! Component: 3250 - total flux cleaned = 0.014017 Jy ! Component: 3300 - total flux cleaned = 0.0138908 Jy ! Component: 3350 - total flux cleaned = 0.0140784 Jy ! Component: 3400 - total flux cleaned = 0.0140786 Jy ! Component: 3450 - total flux cleaned = 0.0142007 Jy ! Component: 3500 - total flux cleaned = 0.0140787 Jy ! Component: 3550 - total flux cleaned = 0.0140178 Jy ! Component: 3600 - total flux cleaned = 0.013958 Jy ! Component: 3650 - total flux cleaned = 0.0139584 Jy ! Component: 3700 - total flux cleaned = 0.013988 Jy ! Component: 3750 - total flux cleaned = 0.0140172 Jy ! Component: 3800 - total flux cleaned = 0.0138717 Jy ! Component: 3850 - total flux cleaned = 0.0138715 Jy ! Component: 3900 - total flux cleaned = 0.013786 Jy ! Component: 3950 - total flux cleaned = 0.0138433 Jy ! Component: 4000 - total flux cleaned = 0.0136745 Jy ! Component: 4050 - total flux cleaned = 0.0137025 Jy ! Total flux subtracted in 4096 components = 0.0136473 Jy ! Clean residual min=-0.001579 max=0.001542 Jy/beam ! Clean residual mean=-0.000001 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.785532 Jy keep ! Adding 330 model components to the UV plane model. ! The established model now contains 607 components and 0.785532 Jy ![Exited script file: muppet] wmap "J0242-2132_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.03 x 7.667 at -6.562 degrees (North through East) ! Clean map min=-0.0038495 max=0.3246 Jy/beam ! Writing clean map to FITS file: J0242-2132_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.324604 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000522198 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.482617 0.482617 0.965235 1.93047 3.86094 7.72188 15.4438 30.8875 61.775 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.324 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.03 x 7.667 at -6.562 degrees (North through East) ! Clean map min=-0.0038495 max=0.3246 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0242-2132_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:03:19 2017