! Started logfile: J0231-3935_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:02:39 2017 obs J0231-3935_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0231-3935_S_2015_01_23_pus_uva.fits ! AN table 1: 106 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.694759 visibilities/baseline/integration-bin. ! Found source: J0231-3935 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 13256 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0231-3935_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.875805Jy sigma=0.005991 ! Fit after self-cal, rms=0.765107Jy sigma=0.005175 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.19 mas, bmaj=6.325 mas, bpa=-3.567 degrees ! Estimated noise=1356.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.186753 Jy ! Component: 100 - total flux cleaned = 0.229261 Jy ! Total flux subtracted in 100 components = 0.229261 Jy ! Clean residual min=-0.016357 max=0.031815 Jy/beam ! Clean residual mean=-0.000261 rms=0.004225 Jy/beam ! Combined flux in latest and established models = 0.229261 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.229261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216554Jy sigma=0.000976 ! Fit after self-cal, rms=0.216513Jy sigma=0.000976 ! Inverting map ! Added new window around map position (-3.5, 6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.028246 Jy ! Component: 100 - total flux cleaned = 0.0446014 Jy ! Total flux subtracted in 100 components = 0.0446014 Jy ! Clean residual min=-0.016518 max=0.026262 Jy/beam ! Clean residual mean=-0.000153 rms=0.003490 Jy/beam ! Combined flux in latest and established models = 0.273863 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 0.273863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209211Jy sigma=0.000918 ! Fit after self-cal, rms=0.208514Jy sigma=0.000912 ! Inverting map ! Added new window around map position (3, 9.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0220868 Jy ! Component: 100 - total flux cleaned = 0.0369188 Jy ! Total flux subtracted in 100 components = 0.0369188 Jy ! Clean residual min=-0.015197 max=0.013799 Jy/beam ! Clean residual mean=-0.000067 rms=0.002781 Jy/beam ! Combined flux in latest and established models = 0.310781 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 43 components and 0.310781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203801Jy sigma=0.000879 ! Fit after self-cal, rms=0.203763Jy sigma=0.000878 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.688 mas, bmaj=7.674 mas, bpa=-3.812 degrees ! Estimated noise=953.933 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182458 Jy ! Component: 100 - total flux cleaned = 0.0298016 Jy ! Component: 150 - total flux cleaned = 0.036565 Jy ! Component: 200 - total flux cleaned = 0.0386596 Jy ! Total flux subtracted in 200 components = 0.0386596 Jy ! Clean residual min=-0.012550 max=0.009693 Jy/beam ! Clean residual mean=0.000006 rms=0.002754 Jy/beam ! Combined flux in latest and established models = 0.349441 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 58 components and 0.349441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201005Jy sigma=0.000865 ! Fit after self-cal, rms=0.200964Jy sigma=0.000864 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.67 HN 1.33 KP 1.13 ! LA 1.04 MK 1.00 NL 1.28 OV 0.98 ! PT 1.05 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.79 HN 1.52 KP 1.06 ! LA 0.99 MK 1.00 NL 1.31 OV 0.99 ! PT 1.04 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.48 KP 0.91 ! LA 0.83 MK 1.01 NL 1.18 OV 0.91 ! PT 1.02 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.84 HN 1.37 KP 0.87 ! LA 0.86 MK 1.03 NL 1.05 OV 1.00 ! PT 1.09 SC 1.02 ! ! ! Fit before self-cal, rms=0.200964Jy sigma=0.000864 ! Fit after self-cal, rms=0.184578Jy sigma=0.000818 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.721 mas, bmaj=7.684 mas, bpa=-3.836 degrees ! Estimated noise=988.185 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00644354 Jy ! Component: 100 - total flux cleaned = -0.00763949 Jy ! Component: 150 - total flux cleaned = -0.00806952 Jy ! Component: 200 - total flux cleaned = -0.00855606 Jy ! Total flux subtracted in 200 components = -0.00855606 Jy ! Clean residual min=-0.004325 max=0.005448 Jy/beam ! Clean residual mean=-0.000004 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.340885 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 0.340885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184209Jy sigma=0.000816 ! Fit after self-cal, rms=0.184177Jy sigma=0.000815 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184177Jy sigma=0.000815 ! Fit after self-cal, rms=0.185277Jy sigma=0.000815 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.733 mas, bmaj=7.706 mas, bpa=-3.865 degrees ! Estimated noise=988.621 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00467797 Jy ! Component: 100 - total flux cleaned = -0.00606245 Jy ! Component: 150 - total flux cleaned = -0.00658258 Jy ! Component: 200 - total flux cleaned = -0.00695523 Jy ! Total flux subtracted in 200 components = -0.00695523 Jy ! Clean residual min=-0.003987 max=0.004765 Jy/beam ! Clean residual mean=-0.000003 rms=0.001086 Jy/beam ! Combined flux in latest and established models = 0.33393 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 79 components and 0.33393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185053Jy sigma=0.000814 ! Fit after self-cal, rms=0.185084Jy sigma=0.000814 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000338701 Jy ! Component: 100 - total flux cleaned = -0.000657502 Jy ! Component: 150 - total flux cleaned = -0.000941782 Jy ! Component: 200 - total flux cleaned = -0.00113556 Jy ! Total flux subtracted in 200 components = -0.00113556 Jy ! Clean residual min=-0.003700 max=0.004594 Jy/beam ! Clean residual mean=-0.000008 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.332794 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 86 components and 0.332794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185019Jy sigma=0.000813 ! Fit after self-cal, rms=0.185015Jy sigma=0.000813 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185015Jy sigma=0.000813 ! Fit after self-cal, rms=0.194505Jy sigma=0.000811 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.743 mas, bmaj=7.722 mas, bpa=-3.825 degrees ! Estimated noise=992.374 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00295211 Jy ! Component: 100 - total flux cleaned = -0.00364832 Jy ! Component: 150 - total flux cleaned = -0.00409443 Jy ! Component: 200 - total flux cleaned = -0.00435564 Jy ! Total flux subtracted in 200 components = -0.00435564 Jy ! Clean residual min=-0.003709 max=0.003672 Jy/beam ! Clean residual mean=-0.000005 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 0.328438 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 92 components and 0.328438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194416Jy sigma=0.000811 ! Fit after self-cal, rms=0.194517Jy sigma=0.000810 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000252285 Jy ! Component: 100 - total flux cleaned = -0.000540868 Jy ! Component: 150 - total flux cleaned = -0.000745814 Jy ! Component: 200 - total flux cleaned = -0.000840119 Jy ! Total flux subtracted in 200 components = -0.000840119 Jy ! Clean residual min=-0.003688 max=0.003731 Jy/beam ! Clean residual mean=-0.000009 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.327598 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 98 components and 0.327598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194482Jy sigma=0.000810 ! Fit after self-cal, rms=0.194476Jy sigma=0.000810 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194476Jy sigma=0.000810 ! Fit after self-cal, rms=0.196738Jy sigma=0.000810 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.104 mas, bmaj=26.19 mas, bpa=-0.3312 degrees ! Estimated noise=1340.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00225297 Jy ! Component: 100 - total flux cleaned = -0.00290988 Jy ! Component: 150 - total flux cleaned = -0.00305128 Jy ! Component: 200 - total flux cleaned = -0.00317754 Jy ! Total flux subtracted in 200 components = -0.00317754 Jy ! Clean residual min=-0.004482 max=0.003759 Jy/beam ! Clean residual mean=-0.000015 rms=0.001209 Jy/beam ! Combined flux in latest and established models = 0.324421 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 106 components and 0.324421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196700Jy sigma=0.000810 ! Fit after self-cal, rms=0.196737Jy sigma=0.000810 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00015306 Jy ! Component: 100 - total flux cleaned = -0.000209983 Jy ! Component: 150 - total flux cleaned = -0.000311829 Jy ! Component: 200 - total flux cleaned = -0.000381289 Jy ! Total flux subtracted in 200 components = -0.000381289 Jy ! Clean residual min=-0.004484 max=0.003863 Jy/beam ! Clean residual mean=-0.000019 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.32404 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 110 components and 0.32404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196728Jy sigma=0.000810 ! Fit after self-cal, rms=0.196725Jy sigma=0.000810 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.749 mas, bmaj=7.73 mas, bpa=-3.831 degrees ! Estimated noise=993.542 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.749 x 7.73 at -3.831 degrees (North through East) ! Clean map min=-0.0033826 max=0.23022 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.219 mas, bmaj=6.302 mas, bpa=-3.226 degrees ! Estimated noise=1442.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.197672 Jy ! Component: 100 - total flux cleaned = 0.246643 Jy ! Component: 150 - total flux cleaned = 0.268129 Jy ! Component: 200 - total flux cleaned = 0.282328 Jy ! Total flux subtracted in 200 components = 0.282328 Jy ! Clean residual min=-0.005661 max=0.009643 Jy/beam ! Clean residual mean=-0.000120 rms=0.001580 Jy/beam ! Combined flux in latest and established models = 0.282328 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.282328 Jy ! Inverting map and beam ! Estimated beam: bmin=2.749 mas, bmaj=7.73 mas, bpa=-3.831 degrees ! Estimated noise=993.542 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, 17.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166048 Jy ! Component: 100 - total flux cleaned = 0.02588 Jy ! Component: 150 - total flux cleaned = 0.0316263 Jy ! Component: 200 - total flux cleaned = 0.0352251 Jy ! Total flux subtracted in 200 components = 0.0352251 Jy ! Clean residual min=-0.003587 max=0.003721 Jy/beam ! Clean residual mean=-0.000033 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.317553 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 76 components and 0.317553 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.104 mas, bmaj=26.19 mas, bpa=-0.3312 degrees ! Estimated noise=1340.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00359384 Jy ! Component: 100 - total flux cleaned = 0.00504623 Jy ! Component: 150 - total flux cleaned = 0.00534091 Jy ! Component: 200 - total flux cleaned = 0.00544562 Jy ! Total flux subtracted in 200 components = 0.00544562 Jy ! Clean residual min=-0.004586 max=0.004289 Jy/beam ! Clean residual mean=-0.000031 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 0.322999 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.85698e-05 Jy ! Component: 100 - total flux cleaned = 0.00015162 Jy ! Component: 150 - total flux cleaned = 0.000207033 Jy ! Component: 200 - total flux cleaned = 0.000241587 Jy ! Total flux subtracted in 200 components = 0.000241587 Jy ! Clean residual min=-0.004575 max=0.004183 Jy/beam ! Clean residual mean=-0.000029 rms=0.001241 Jy/beam ! Combined flux in latest and established models = 0.32324 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 89 components and 0.32324 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.749 mas, bmaj=7.73 mas, bpa=-3.831 degrees ! Estimated noise=993.542 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000281555 Jy ! Component: 100 - total flux cleaned = -0.000332847 Jy ! Component: 150 - total flux cleaned = -0.000290308 Jy ! Component: 200 - total flux cleaned = -0.000253163 Jy ! Total flux subtracted in 200 components = -0.000253163 Jy ! Clean residual min=-0.003583 max=0.003271 Jy/beam ! Clean residual mean=-0.000015 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.322987 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 104 components and 0.322987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196699Jy sigma=0.000810 ! Fit after self-cal, rms=0.196705Jy sigma=0.000810 wmodel J0231-3935_S_2015_01_23_pus_map.mod ! Writing 104 model components to file: J0231-3935_S_2015_01_23_pus_map.mod wobs J0231-3935_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0231-3935_S_2015_01_23_pus_uvs.fits wwins J0231-3935_S_2015_01_23_pus_map.win ! wwins: Wrote 4 windows to J0231-3935_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000210213 Jy ! Component: 100 - total flux cleaned = -0.000488246 Jy ! Component: 150 - total flux cleaned = -0.000700387 Jy ! Component: 200 - total flux cleaned = -0.000952205 Jy ! Component: 250 - total flux cleaned = -0.00109752 Jy ! Component: 300 - total flux cleaned = -0.00119163 Jy ! Component: 350 - total flux cleaned = -0.00137415 Jy ! Component: 400 - total flux cleaned = -0.00146264 Jy ! Component: 450 - total flux cleaned = -0.00163388 Jy ! Component: 500 - total flux cleaned = -0.00175928 Jy ! Component: 550 - total flux cleaned = -0.00192304 Jy ! Component: 600 - total flux cleaned = -0.00212238 Jy ! Component: 650 - total flux cleaned = -0.00235639 Jy ! Component: 700 - total flux cleaned = -0.00239395 Jy ! Component: 750 - total flux cleaned = -0.00254449 Jy ! Component: 800 - total flux cleaned = -0.0026554 Jy ! Component: 850 - total flux cleaned = -0.00290911 Jy ! Component: 900 - total flux cleaned = -0.00308618 Jy ! Component: 950 - total flux cleaned = -0.00326057 Jy ! Component: 1000 - total flux cleaned = -0.00350023 Jy ! Component: 1050 - total flux cleaned = -0.00366979 Jy ! Component: 1100 - total flux cleaned = -0.00387032 Jy ! Component: 1150 - total flux cleaned = -0.00406839 Jy ! Component: 1200 - total flux cleaned = -0.00436006 Jy ! Component: 1250 - total flux cleaned = -0.00452009 Jy ! Component: 1300 - total flux cleaned = -0.00470966 Jy ! Component: 1350 - total flux cleaned = -0.00489657 Jy ! Component: 1400 - total flux cleaned = -0.00498872 Jy ! Component: 1450 - total flux cleaned = -0.00520156 Jy ! Component: 1500 - total flux cleaned = -0.00529122 Jy ! Component: 1550 - total flux cleaned = -0.00537996 Jy ! Component: 1600 - total flux cleaned = -0.00552576 Jy ! Component: 1650 - total flux cleaned = -0.0055257 Jy ! Component: 1700 - total flux cleaned = -0.00558318 Jy ! Component: 1750 - total flux cleaned = -0.00566806 Jy ! Component: 1800 - total flux cleaned = -0.0056122 Jy ! Component: 1850 - total flux cleaned = -0.00566766 Jy ! Component: 1900 - total flux cleaned = -0.0057499 Jy ! Component: 1950 - total flux cleaned = -0.00566816 Jy ! Component: 2000 - total flux cleaned = -0.00574917 Jy ! Component: 2050 - total flux cleaned = -0.00564207 Jy ! Component: 2100 - total flux cleaned = -0.00561559 Jy ! Component: 2150 - total flux cleaned = -0.00564186 Jy ! Component: 2200 - total flux cleaned = -0.00561573 Jy ! Component: 2250 - total flux cleaned = -0.00558996 Jy ! Component: 2300 - total flux cleaned = -0.00559029 Jy ! Component: 2350 - total flux cleaned = -0.00561573 Jy ! Component: 2400 - total flux cleaned = -0.00561588 Jy ! Component: 2450 - total flux cleaned = -0.00561625 Jy ! Component: 2500 - total flux cleaned = -0.00576447 Jy ! Component: 2550 - total flux cleaned = -0.00578898 Jy ! Component: 2600 - total flux cleaned = -0.0057649 Jy ! Component: 2650 - total flux cleaned = -0.00593368 Jy ! Component: 2700 - total flux cleaned = -0.00588551 Jy ! Component: 2750 - total flux cleaned = -0.00588538 Jy ! Component: 2800 - total flux cleaned = -0.00588545 Jy ! Component: 2850 - total flux cleaned = -0.00595581 Jy ! Component: 2900 - total flux cleaned = -0.00597911 Jy ! Component: 2950 - total flux cleaned = -0.00604857 Jy ! Component: 3000 - total flux cleaned = -0.00604871 Jy ! Component: 3050 - total flux cleaned = -0.00602609 Jy ! Component: 3100 - total flux cleaned = -0.00602631 Jy ! Component: 3150 - total flux cleaned = -0.0060712 Jy ! Component: 3200 - total flux cleaned = -0.00616043 Jy ! Component: 3250 - total flux cleaned = -0.00620461 Jy ! Component: 3300 - total flux cleaned = -0.00618264 Jy ! Component: 3350 - total flux cleaned = -0.00622646 Jy ! Component: 3400 - total flux cleaned = -0.00620482 Jy ! Component: 3450 - total flux cleaned = -0.00620451 Jy ! Component: 3500 - total flux cleaned = -0.00622619 Jy ! Component: 3550 - total flux cleaned = -0.00618371 Jy ! Component: 3600 - total flux cleaned = -0.00626835 Jy ! Component: 3650 - total flux cleaned = -0.00635228 Jy ! Component: 3700 - total flux cleaned = -0.00628964 Jy ! Component: 3750 - total flux cleaned = -0.00641402 Jy ! Component: 3800 - total flux cleaned = -0.00633156 Jy ! Component: 3850 - total flux cleaned = -0.00649545 Jy ! Component: 3900 - total flux cleaned = -0.00645458 Jy ! Component: 3950 - total flux cleaned = -0.00643435 Jy ! Component: 4000 - total flux cleaned = -0.00641439 Jy ! Component: 4050 - total flux cleaned = -0.00645442 Jy ! Total flux subtracted in 4096 components = -0.00653377 Jy ! Clean residual min=-0.001257 max=0.001217 Jy/beam ! Clean residual mean=-0.000002 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.316453 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 390 components and 0.316453 Jy ![Exited script file: muppet] wmap "J0231-3935_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.749 x 7.73 at -3.831 degrees (North through East) ! Clean map min=-0.002277 max=0.22818 Jy/beam ! Writing clean map to FITS file: J0231-3935_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.228185 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000365841 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.48098 0.48098 0.96196 1.92392 3.84784 7.69568 15.3914 30.7827 61.5655 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.228 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.749 x 7.73 at -3.831 degrees (North through East) ! Clean map min=-0.002277 max=0.22818 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0231-3935_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:02:44 2017