! Started logfile: J0231-1606_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:14:57 2017 obs J0231-1606_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0231-1606_S_2014_01_04_pus_uva.fits ! AN table 1: 108 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0231-1606 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0231-1606_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.881482Jy sigma=0.008864 ! Fit after self-cal, rms=0.803159Jy sigma=0.008246 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.337 mas, bmaj=5.597 mas, bpa=0.1036 degrees ! Estimated noise=1183.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.209761 Jy ! Component: 100 - total flux cleaned = 0.264172 Jy ! Total flux subtracted in 100 components = 0.264172 Jy ! Clean residual min=-0.015893 max=0.022529 Jy/beam ! Clean residual mean=0.000010 rms=0.004738 Jy/beam ! Combined flux in latest and established models = 0.264172 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.264172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.487526Jy sigma=0.001319 ! Fit after self-cal, rms=0.487538Jy sigma=0.001319 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.952 mas, bmaj=6.641 mas, bpa=-1.011 degrees ! Estimated noise=695.473 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0336198 Jy ! Component: 100 - total flux cleaned = 0.0479536 Jy ! Component: 150 - total flux cleaned = 0.0554 Jy ! Component: 200 - total flux cleaned = 0.0581209 Jy ! Total flux subtracted in 200 components = 0.0581209 Jy ! Clean residual min=-0.021740 max=0.019083 Jy/beam ! Clean residual mean=0.000029 rms=0.005444 Jy/beam ! Combined flux in latest and established models = 0.322293 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 24 components and 0.322293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.479060Jy sigma=0.001292 ! Fit after self-cal, rms=0.479075Jy sigma=0.001292 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* KP 1.00* LA 1.04 ! MK 0.98 NL 1.02 OV 1.00 PT 1.03 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* KP 1.00* LA 1.04 ! MK 0.98 NL 1.08 OV 1.05 PT 1.01 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 1.00* KP 1.00* LA 0.85 ! MK 1.00 NL 1.02 OV 0.95 PT 1.40 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.00* KP 1.00* LA 0.92 ! MK 1.04 NL 1.15 OV 1.03 PT 1.07 ! SC 0.96 ! ! ! Fit before self-cal, rms=0.479075Jy sigma=0.001292 ! Fit after self-cal, rms=0.394450Jy sigma=0.001208 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.925 mas, bmaj=6.579 mas, bpa=-0.6617 degrees ! Estimated noise=721.522 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115257 Jy ! Component: 100 - total flux cleaned = 0.0169102 Jy ! Component: 150 - total flux cleaned = 0.0193752 Jy ! Component: 200 - total flux cleaned = 0.0196432 Jy ! Total flux subtracted in 200 components = 0.0196432 Jy ! Clean residual min=-0.019138 max=0.017183 Jy/beam ! Clean residual mean=0.000018 rms=0.005475 Jy/beam ! Combined flux in latest and established models = 0.341936 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 31 components and 0.341936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.392103Jy sigma=0.001216 ! Fit after self-cal, rms=0.392097Jy sigma=0.001216 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.392097Jy sigma=0.001216 ! Fit after self-cal, rms=0.187266Jy sigma=0.001083 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.908 mas, bmaj=6.559 mas, bpa=-0.5847 degrees ! Estimated noise=739.761 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0077663 Jy ! Component: 100 - total flux cleaned = 0.0110843 Jy ! Component: 150 - total flux cleaned = 0.0125205 Jy ! Component: 200 - total flux cleaned = 0.0128956 Jy ! Total flux subtracted in 200 components = 0.0128956 Jy ! Clean residual min=-0.008983 max=0.007740 Jy/beam ! Clean residual mean=-0.000007 rms=0.002381 Jy/beam ! Combined flux in latest and established models = 0.354832 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 41 components and 0.354832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186073Jy sigma=0.001085 ! Fit after self-cal, rms=0.185967Jy sigma=0.001085 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000278489 Jy ! Component: 100 - total flux cleaned = 0.000397553 Jy ! Component: 150 - total flux cleaned = 0.000504506 Jy ! Component: 200 - total flux cleaned = 0.00060095 Jy ! Total flux subtracted in 200 components = 0.00060095 Jy ! Clean residual min=-0.009205 max=0.007714 Jy/beam ! Clean residual mean=-0.000008 rms=0.002394 Jy/beam ! Combined flux in latest and established models = 0.355433 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.355433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185880Jy sigma=0.001085 ! Fit after self-cal, rms=0.185881Jy sigma=0.001085 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185881Jy sigma=0.001085 ! Fit after self-cal, rms=0.158195Jy sigma=0.001075 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.899 mas, bmaj=6.544 mas, bpa=-0.5747 degrees ! Estimated noise=755.224 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00564016 Jy ! Component: 100 - total flux cleaned = 0.00792666 Jy ! Component: 150 - total flux cleaned = 0.00913908 Jy ! Component: 200 - total flux cleaned = 0.00947806 Jy ! Total flux subtracted in 200 components = 0.00947806 Jy ! Clean residual min=-0.006922 max=0.006311 Jy/beam ! Clean residual mean=-0.000007 rms=0.001829 Jy/beam ! Combined flux in latest and established models = 0.364911 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 0.364911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157457Jy sigma=0.001078 ! Fit after self-cal, rms=0.157426Jy sigma=0.001078 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165166 Jy ! Component: 100 - total flux cleaned = 0.000253036 Jy ! Component: 150 - total flux cleaned = 0.000273916 Jy ! Component: 200 - total flux cleaned = 0.000292892 Jy ! Total flux subtracted in 200 components = 0.000292892 Jy ! Clean residual min=-0.006966 max=0.006292 Jy/beam ! Clean residual mean=-0.000007 rms=0.001829 Jy/beam ! Combined flux in latest and established models = 0.365204 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 0.365204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157391Jy sigma=0.001078 ! Fit after self-cal, rms=0.157392Jy sigma=0.001078 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157392Jy sigma=0.001078 ! Fit after self-cal, rms=0.161628Jy sigma=0.001075 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.485 mas, bmaj=14.79 mas, bpa=3.226 degrees ! Estimated noise=1001.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00823224 Jy ! Component: 100 - total flux cleaned = 0.0104224 Jy ! Component: 150 - total flux cleaned = 0.0104252 Jy ! Component: 200 - total flux cleaned = 0.0103205 Jy ! Total flux subtracted in 200 components = 0.0103205 Jy ! Clean residual min=-0.011265 max=0.008041 Jy/beam ! Clean residual mean=-0.000016 rms=0.003361 Jy/beam ! Combined flux in latest and established models = 0.375524 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 55 components and 0.375524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160923Jy sigma=0.001078 ! Fit after self-cal, rms=0.160921Jy sigma=0.001078 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.197e-05 Jy ! Component: 100 - total flux cleaned = -7.51762e-05 Jy ! Component: 150 - total flux cleaned = -0.000165895 Jy ! Component: 200 - total flux cleaned = -0.000166214 Jy ! Total flux subtracted in 200 components = -0.000166214 Jy ! Clean residual min=-0.010989 max=0.008029 Jy/beam ! Clean residual mean=-0.000016 rms=0.003325 Jy/beam ! Combined flux in latest and established models = 0.375358 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 58 components and 0.375358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160903Jy sigma=0.001079 ! Fit after self-cal, rms=0.160904Jy sigma=0.001079 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.89 mas, bmaj=6.535 mas, bpa=-0.5768 degrees ! Estimated noise=771.392 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.89 x 6.535 at -0.5768 degrees (North through East) ! Clean map min=-0.0070865 max=0.30994 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.286 mas, bmaj=5.551 mas, bpa=0.7262 degrees ! Estimated noise=1304.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.231279 Jy ! Component: 100 - total flux cleaned = 0.294682 Jy ! Component: 150 - total flux cleaned = 0.325399 Jy ! Component: 200 - total flux cleaned = 0.342604 Jy ! Total flux subtracted in 200 components = 0.342604 Jy ! Clean residual min=-0.007916 max=0.009330 Jy/beam ! Clean residual mean=-0.000004 rms=0.002139 Jy/beam ! Combined flux in latest and established models = 0.342604 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.342604 Jy ! Inverting map and beam ! Estimated beam: bmin=2.89 mas, bmaj=6.535 mas, bpa=-0.5768 degrees ! Estimated noise=771.392 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150787 Jy ! Component: 100 - total flux cleaned = 0.022876 Jy ! Component: 150 - total flux cleaned = 0.0272135 Jy ! Component: 200 - total flux cleaned = 0.0296465 Jy ! Total flux subtracted in 200 components = 0.0296465 Jy ! Clean residual min=-0.007299 max=0.006548 Jy/beam ! Clean residual mean=-0.000007 rms=0.001915 Jy/beam ! Combined flux in latest and established models = 0.372251 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 35 components and 0.372251 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.485 mas, bmaj=14.79 mas, bpa=3.226 degrees ! Estimated noise=1001.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257161 Jy ! Component: 100 - total flux cleaned = 0.00270531 Jy ! Component: 150 - total flux cleaned = 0.00264831 Jy ! Component: 200 - total flux cleaned = 0.00259466 Jy ! Total flux subtracted in 200 components = 0.00259466 Jy ! Clean residual min=-0.011519 max=0.008152 Jy/beam ! Clean residual mean=-0.000017 rms=0.003395 Jy/beam ! Combined flux in latest and established models = 0.374845 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.51462e-05 Jy ! Component: 100 - total flux cleaned = -0.000105984 Jy ! Component: 150 - total flux cleaned = -0.000156421 Jy ! Component: 200 - total flux cleaned = -0.000155533 Jy ! Total flux subtracted in 200 components = -0.000155533 Jy ! Clean residual min=-0.011271 max=0.008047 Jy/beam ! Clean residual mean=-0.000016 rms=0.003356 Jy/beam ! Combined flux in latest and established models = 0.37469 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.37469 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.89 mas, bmaj=6.535 mas, bpa=-0.5768 degrees ! Estimated noise=771.392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110755 Jy ! Component: 100 - total flux cleaned = -0.00117259 Jy ! Component: 150 - total flux cleaned = -0.00113476 Jy ! Component: 200 - total flux cleaned = -0.00113567 Jy ! Total flux subtracted in 200 components = -0.00113567 Jy ! Clean residual min=-0.007307 max=0.006550 Jy/beam ! Clean residual mean=-0.000007 rms=0.001876 Jy/beam ! Combined flux in latest and established models = 0.373554 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 55 components and 0.373554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160934Jy sigma=0.001078 ! Fit after self-cal, rms=0.160925Jy sigma=0.001078 wmodel J0231-1606_S_2014_01_04_pus_map.mod ! Writing 55 model components to file: J0231-1606_S_2014_01_04_pus_map.mod wobs J0231-1606_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0231-1606_S_2014_01_04_pus_uvs.fits wwins J0231-1606_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J0231-1606_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00277016 Jy ! Component: 100 - total flux cleaned = -0.00448928 Jy ! Component: 150 - total flux cleaned = -0.00594999 Jy ! Component: 200 - total flux cleaned = -0.00663076 Jy ! Component: 250 - total flux cleaned = -0.00718637 Jy ! Component: 300 - total flux cleaned = -0.00780091 Jy ! Component: 350 - total flux cleaned = -0.00813473 Jy ! Component: 400 - total flux cleaned = -0.00869357 Jy ! Component: 450 - total flux cleaned = -0.00915211 Jy ! Component: 500 - total flux cleaned = -0.00951893 Jy ! Component: 550 - total flux cleaned = -0.0097313 Jy ! Component: 600 - total flux cleaned = -0.0100041 Jy ! Component: 650 - total flux cleaned = -0.0101358 Jy ! Component: 700 - total flux cleaned = -0.0100725 Jy ! Component: 750 - total flux cleaned = -0.0100733 Jy ! Component: 800 - total flux cleaned = -0.00995441 Jy ! Component: 850 - total flux cleaned = -0.00995499 Jy ! Component: 900 - total flux cleaned = -0.00989809 Jy ! Component: 950 - total flux cleaned = -0.00973244 Jy ! Component: 1000 - total flux cleaned = -0.00973333 Jy ! Component: 1050 - total flux cleaned = -0.00973352 Jy ! Component: 1100 - total flux cleaned = -0.00973379 Jy ! Component: 1150 - total flux cleaned = -0.00963352 Jy ! Component: 1200 - total flux cleaned = -0.00938764 Jy ! Component: 1250 - total flux cleaned = -0.00929201 Jy ! Component: 1300 - total flux cleaned = -0.00910422 Jy ! Component: 1350 - total flux cleaned = -0.00910443 Jy ! Component: 1400 - total flux cleaned = -0.00901379 Jy ! Component: 1450 - total flux cleaned = -0.00905834 Jy ! Component: 1500 - total flux cleaned = -0.00901422 Jy ! Component: 1550 - total flux cleaned = -0.0088424 Jy ! Component: 1600 - total flux cleaned = -0.00875815 Jy ! Component: 1650 - total flux cleaned = -0.00875879 Jy ! Component: 1700 - total flux cleaned = -0.00884031 Jy ! Component: 1750 - total flux cleaned = -0.00884005 Jy ! Component: 1800 - total flux cleaned = -0.00887982 Jy ! Component: 1850 - total flux cleaned = -0.00888047 Jy ! Component: 1900 - total flux cleaned = -0.00880404 Jy ! Component: 1950 - total flux cleaned = -0.00884132 Jy ! Component: 2000 - total flux cleaned = -0.00876691 Jy ! Component: 2050 - total flux cleaned = -0.00869299 Jy ! Component: 2100 - total flux cleaned = -0.00872913 Jy ! Component: 2150 - total flux cleaned = -0.00855042 Jy ! Component: 2200 - total flux cleaned = -0.00851538 Jy ! Component: 2250 - total flux cleaned = -0.00855048 Jy ! Component: 2300 - total flux cleaned = -0.00848224 Jy ! Component: 2350 - total flux cleaned = -0.00848243 Jy ! Component: 2400 - total flux cleaned = -0.00828068 Jy ! Component: 2450 - total flux cleaned = -0.00818097 Jy ! Component: 2500 - total flux cleaned = -0.00811479 Jy ! Component: 2550 - total flux cleaned = -0.00798395 Jy ! Component: 2600 - total flux cleaned = -0.00791906 Jy ! Component: 2650 - total flux cleaned = -0.0078231 Jy ! Component: 2700 - total flux cleaned = -0.00782338 Jy ! Component: 2750 - total flux cleaned = -0.00766579 Jy ! Component: 2800 - total flux cleaned = -0.00769695 Jy ! Component: 2850 - total flux cleaned = -0.00769692 Jy ! Component: 2900 - total flux cleaned = -0.00769668 Jy ! Component: 2950 - total flux cleaned = -0.00763529 Jy ! Component: 3000 - total flux cleaned = -0.00754435 Jy ! Component: 3050 - total flux cleaned = -0.00757423 Jy ! Component: 3100 - total flux cleaned = -0.00751445 Jy ! Component: 3150 - total flux cleaned = -0.00742517 Jy ! Component: 3200 - total flux cleaned = -0.00733682 Jy ! Component: 3250 - total flux cleaned = -0.00733704 Jy ! Component: 3300 - total flux cleaned = -0.0073661 Jy ! Component: 3350 - total flux cleaned = -0.0073952 Jy ! Component: 3400 - total flux cleaned = -0.00745271 Jy ! Component: 3450 - total flux cleaned = -0.00739588 Jy ! Component: 3500 - total flux cleaned = -0.0074526 Jy ! Component: 3550 - total flux cleaned = -0.00745279 Jy ! Component: 3600 - total flux cleaned = -0.0074247 Jy ! Component: 3650 - total flux cleaned = -0.00748052 Jy ! Component: 3700 - total flux cleaned = -0.00748041 Jy ! Component: 3750 - total flux cleaned = -0.00748041 Jy ! Component: 3800 - total flux cleaned = -0.0075079 Jy ! Component: 3850 - total flux cleaned = -0.00745314 Jy ! Component: 3900 - total flux cleaned = -0.00750757 Jy ! Component: 3950 - total flux cleaned = -0.00753455 Jy ! Component: 4000 - total flux cleaned = -0.00750757 Jy ! Component: 4050 - total flux cleaned = -0.00758812 Jy ! Total flux subtracted in 4096 components = -0.00756152 Jy ! Clean residual min=-0.001651 max=0.001677 Jy/beam ! Clean residual mean=0.000003 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.365993 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 358 components and 0.365993 Jy ![Exited script file: muppet] wmap "J0231-1606_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.89 x 6.535 at -0.5768 degrees (North through East) ! Clean map min=-0.0030816 max=0.31046 Jy/beam ! Writing clean map to FITS file: J0231-1606_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.310458 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000460561 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.445047 0.445047 0.890094 1.78019 3.56037 7.12075 14.2415 28.483 56.966 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.31 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.89 x 6.535 at -0.5768 degrees (North through East) ! Clean map min=-0.0030816 max=0.31046 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0231-1606_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:15:02 2017