! Started logfile: J0226-1843_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:14:48 2017 obs J0226-1843_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0226-1843_S_2014_01_04_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0226-1843 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9744 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0226-1843_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 232 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 232 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 232 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 232 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.980104Jy sigma=0.012003 ! Fit after self-cal, rms=0.930948Jy sigma=0.011405 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.485 mas, bmaj=5.601 mas, bpa=-1.79 degrees ! Estimated noise=882.245 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0558497 Jy ! Component: 100 - total flux cleaned = 0.0680335 Jy ! Total flux subtracted in 100 components = 0.0680335 Jy ! Clean residual min=-0.003612 max=0.003452 Jy/beam ! Clean residual mean=0.000001 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.0680335 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0680335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082282Jy sigma=0.000897 ! Fit after self-cal, rms=0.082196Jy sigma=0.000894 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.023 mas, bmaj=6.65 mas, bpa=-0.8467 degrees ! Estimated noise=613.536 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00430023 Jy ! Component: 100 - total flux cleaned = 0.00599107 Jy ! Component: 150 - total flux cleaned = 0.00658274 Jy ! Component: 200 - total flux cleaned = 0.00671929 Jy ! Total flux subtracted in 200 components = 0.00671929 Jy ! Clean residual min=-0.002926 max=0.002703 Jy/beam ! Clean residual mean=0.000005 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.0747528 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 12 components and 0.0747528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081975Jy sigma=0.000892 ! Fit after self-cal, rms=0.082043Jy sigma=0.000892 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* KP 1.00* LA 1.01 ! MK 0.98 NL 1.00 OV 0.98 PT 1.02 ! SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* KP 1.00* LA 1.01 ! MK 0.93 NL 1.06 OV 1.00 PT 1.07 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* KP 1.00* LA 0.86 ! MK 1.04 NL 0.99 OV 0.97 PT 1.01 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* KP 1.00* LA 0.93 ! MK 1.02 NL 1.02 OV 1.08 PT 1.10 ! SC 1.01 ! ! ! Fit before self-cal, rms=0.082043Jy sigma=0.000892 ! Fit after self-cal, rms=0.081305Jy sigma=0.000889 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.017 mas, bmaj=6.63 mas, bpa=-0.8733 degrees ! Estimated noise=614.157 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000634867 Jy ! Component: 100 - total flux cleaned = 0.00069018 Jy ! Component: 150 - total flux cleaned = 0.000707115 Jy ! Component: 200 - total flux cleaned = 0.000735958 Jy ! Total flux subtracted in 200 components = 0.000735958 Jy ! Clean residual min=-0.002323 max=0.002395 Jy/beam ! Clean residual mean=0.000003 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.0754887 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 22 components and 0.0754887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081292Jy sigma=0.000889 ! Fit after self-cal, rms=0.081425Jy sigma=0.000889 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081425Jy sigma=0.000889 ! Fit after self-cal, rms=0.082251Jy sigma=0.000888 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.009 mas, bmaj=6.63 mas, bpa=-0.6834 degrees ! Estimated noise=616.936 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000575471 Jy ! Component: 100 - total flux cleaned = 0.000610874 Jy ! Component: 150 - total flux cleaned = 0.000625433 Jy ! Component: 200 - total flux cleaned = 0.00062551 Jy ! Total flux subtracted in 200 components = 0.00062551 Jy ! Clean residual min=-0.002274 max=0.002193 Jy/beam ! Clean residual mean=0.000003 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.0761143 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 25 components and 0.0761143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082240Jy sigma=0.000888 ! Fit after self-cal, rms=0.082305Jy sigma=0.000887 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.08842e-05 Jy ! Component: 100 - total flux cleaned = 8.53501e-05 Jy ! Component: 150 - total flux cleaned = 9.79302e-05 Jy ! Component: 200 - total flux cleaned = 9.80449e-05 Jy ! Total flux subtracted in 200 components = 9.80449e-05 Jy ! Clean residual min=-0.002221 max=0.002269 Jy/beam ! Clean residual mean=0.000003 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.0762123 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 28 components and 0.0762123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082300Jy sigma=0.000887 ! Fit after self-cal, rms=0.082314Jy sigma=0.000887 ! Inverting map ! Added new window around map position (-3.5, 71.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194237 Jy ! Component: 100 - total flux cleaned = 0.00257587 Jy ! Component: 150 - total flux cleaned = 0.00285001 Jy ! Component: 200 - total flux cleaned = 0.00298633 Jy ! Total flux subtracted in 200 components = 0.00298633 Jy ! Clean residual min=-0.002205 max=0.001822 Jy/beam ! Clean residual mean=0.000004 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.0791986 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 44 components and 0.0791986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082253Jy sigma=0.000887 ! Fit after self-cal, rms=0.082251Jy sigma=0.000887 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082251Jy sigma=0.000887 ! Fit after self-cal, rms=0.082237Jy sigma=0.000887 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.006 mas, bmaj=6.628 mas, bpa=-0.6671 degrees ! Estimated noise=616.704 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000738172 Jy ! Component: 100 - total flux cleaned = 0.000876421 Jy ! Component: 150 - total flux cleaned = 0.00097704 Jy ! Component: 200 - total flux cleaned = 0.00107009 Jy ! Total flux subtracted in 200 components = 0.00107009 Jy ! Clean residual min=-0.002167 max=0.001818 Jy/beam ! Clean residual mean=0.000003 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.0802687 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 50 components and 0.0802687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082214Jy sigma=0.000887 ! Fit after self-cal, rms=0.082234Jy sigma=0.000887 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000280773 Jy ! Component: 100 - total flux cleaned = 0.000349347 Jy ! Component: 150 - total flux cleaned = 0.000434294 Jy ! Component: 200 - total flux cleaned = 0.000494563 Jy ! Total flux subtracted in 200 components = 0.000494563 Jy ! Clean residual min=-0.002163 max=0.001846 Jy/beam ! Clean residual mean=0.000003 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.0807633 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 55 components and 0.0807633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082220Jy sigma=0.000886 ! Fit after self-cal, rms=0.082230Jy sigma=0.000886 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082230Jy sigma=0.000886 ! Fit after self-cal, rms=0.082158Jy sigma=0.000886 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.628 mas, bmaj=15.47 mas, bpa=4.513 degrees ! Estimated noise=761.976 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00024408 Jy ! Component: 100 - total flux cleaned = 0.000269538 Jy ! Component: 150 - total flux cleaned = 0.000280082 Jy ! Component: 200 - total flux cleaned = 0.000298787 Jy ! Total flux subtracted in 200 components = 0.000298787 Jy ! Clean residual min=-0.002245 max=0.002339 Jy/beam ! Clean residual mean=0.000008 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.0810621 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 69 components and 0.0810621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082158Jy sigma=0.000886 ! Fit after self-cal, rms=0.082155Jy sigma=0.000886 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.8201e-06 Jy ! Component: 100 - total flux cleaned = 2.36808e-05 Jy ! Component: 150 - total flux cleaned = 3.23499e-05 Jy ! Component: 200 - total flux cleaned = 5.61007e-05 Jy ! Total flux subtracted in 200 components = 5.61007e-05 Jy ! Clean residual min=-0.002244 max=0.002312 Jy/beam ! Clean residual mean=0.000008 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.0811182 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 0.0811182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082157Jy sigma=0.000886 ! Fit after self-cal, rms=0.082156Jy sigma=0.000886 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.003 mas, bmaj=6.622 mas, bpa=-0.614 degrees ! Estimated noise=617.236 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.003 x 6.622 at -0.614 degrees (North through East) ! Clean map min=-0.0020546 max=0.072539 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.473 mas, bmaj=5.598 mas, bpa=-1.737 degrees ! Estimated noise=888.681 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0560704 Jy ! Component: 100 - total flux cleaned = 0.0685259 Jy ! Component: 150 - total flux cleaned = 0.0729737 Jy ! Component: 200 - total flux cleaned = 0.0757102 Jy ! Total flux subtracted in 200 components = 0.0757102 Jy ! Clean residual min=-0.002726 max=0.002759 Jy/beam ! Clean residual mean=0.000000 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.0757102 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0757102 Jy ! Inverting map and beam ! Estimated beam: bmin=3.003 mas, bmaj=6.622 mas, bpa=-0.614 degrees ! Estimated noise=617.236 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223519 Jy ! Component: 100 - total flux cleaned = 0.00330768 Jy ! Component: 150 - total flux cleaned = 0.00390429 Jy ! Component: 200 - total flux cleaned = 0.00433775 Jy ! Total flux subtracted in 200 components = 0.00433775 Jy ! Clean residual min=-0.002120 max=0.001860 Jy/beam ! Clean residual mean=0.000003 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.0800479 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 29 components and 0.0800479 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.628 mas, bmaj=15.47 mas, bpa=4.513 degrees ! Estimated noise=761.976 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000520872 Jy ! Component: 100 - total flux cleaned = 0.00061663 Jy ! Component: 150 - total flux cleaned = 0.000618043 Jy ! Component: 200 - total flux cleaned = 0.00063085 Jy ! Total flux subtracted in 200 components = 0.00063085 Jy ! Clean residual min=-0.002316 max=0.002360 Jy/beam ! Clean residual mean=0.000008 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.0806788 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.87581e-07 Jy ! Component: 100 - total flux cleaned = 2.60657e-05 Jy ! Component: 150 - total flux cleaned = 6.03677e-05 Jy ! Component: 200 - total flux cleaned = 8.49242e-05 Jy ! Total flux subtracted in 200 components = 8.49242e-05 Jy ! Clean residual min=-0.002290 max=0.002320 Jy/beam ! Clean residual mean=0.000008 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.0807637 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 49 components and 0.0807637 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.003 mas, bmaj=6.622 mas, bpa=-0.614 degrees ! Estimated noise=617.236 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000344908 Jy ! Component: 100 - total flux cleaned = 0.000380008 Jy ! Component: 150 - total flux cleaned = 0.000438168 Jy ! Component: 200 - total flux cleaned = 0.000463977 Jy ! Total flux subtracted in 200 components = 0.000463977 Jy ! Clean residual min=-0.002136 max=0.001934 Jy/beam ! Clean residual mean=0.000003 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.0812277 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 63 components and 0.0812277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082170Jy sigma=0.000887 ! Fit after self-cal, rms=0.082166Jy sigma=0.000887 wmodel J0226-1843_S_2014_01_04_pus_map.mod ! Writing 63 model components to file: J0226-1843_S_2014_01_04_pus_map.mod wobs J0226-1843_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0226-1843_S_2014_01_04_pus_uvs.fits wwins J0226-1843_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J0226-1843_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000346191 Jy ! Component: 100 - total flux cleaned = -0.000671867 Jy ! Component: 150 - total flux cleaned = -0.000762766 Jy ! Component: 200 - total flux cleaned = -0.000906343 Jy ! Component: 250 - total flux cleaned = -0.00109788 Jy ! Component: 300 - total flux cleaned = -0.00133373 Jy ! Component: 350 - total flux cleaned = -0.00135961 Jy ! Component: 400 - total flux cleaned = -0.00148218 Jy ! Component: 450 - total flux cleaned = -0.00148197 Jy ! Component: 500 - total flux cleaned = -0.00150568 Jy ! Component: 550 - total flux cleaned = -0.00152862 Jy ! Component: 600 - total flux cleaned = -0.00155046 Jy ! Component: 650 - total flux cleaned = -0.00152881 Jy ! Component: 700 - total flux cleaned = -0.00159099 Jy ! Component: 750 - total flux cleaned = -0.0015707 Jy ! Component: 800 - total flux cleaned = -0.00159045 Jy ! Component: 850 - total flux cleaned = -0.00160945 Jy ! Component: 900 - total flux cleaned = -0.00164679 Jy ! Component: 950 - total flux cleaned = -0.0017752 Jy ! Component: 1000 - total flux cleaned = -0.00184681 Jy ! Component: 1050 - total flux cleaned = -0.00191742 Jy ! Component: 1100 - total flux cleaned = -0.0020387 Jy ! Component: 1150 - total flux cleaned = -0.0021578 Jy ! Component: 1200 - total flux cleaned = -0.00224165 Jy ! Component: 1250 - total flux cleaned = -0.00235669 Jy ! Component: 1300 - total flux cleaned = -0.00246964 Jy ! Component: 1350 - total flux cleaned = -0.00254906 Jy ! Component: 1400 - total flux cleaned = -0.00262697 Jy ! Component: 1450 - total flux cleaned = -0.00265753 Jy ! Component: 1500 - total flux cleaned = -0.00270294 Jy ! Component: 1550 - total flux cleaned = -0.00267317 Jy ! Component: 1600 - total flux cleaned = -0.00271715 Jy ! Component: 1650 - total flux cleaned = -0.00271698 Jy ! Component: 1700 - total flux cleaned = -0.00273113 Jy ! Component: 1750 - total flux cleaned = -0.0027873 Jy ! Component: 1800 - total flux cleaned = -0.00278731 Jy ! Component: 1850 - total flux cleaned = -0.00284193 Jy ! Component: 1900 - total flux cleaned = -0.00290924 Jy ! Component: 1950 - total flux cleaned = -0.00294918 Jy ! Component: 2000 - total flux cleaned = -0.00297551 Jy ! Component: 2050 - total flux cleaned = -0.00305336 Jy ! Component: 2100 - total flux cleaned = -0.00310465 Jy ! Component: 2150 - total flux cleaned = -0.00316767 Jy ! Component: 2200 - total flux cleaned = -0.00321738 Jy ! Component: 2250 - total flux cleaned = -0.00321723 Jy ! Component: 2300 - total flux cleaned = -0.00321732 Jy ! Component: 2350 - total flux cleaned = -0.00328989 Jy ! Component: 2400 - total flux cleaned = -0.00328982 Jy ! Component: 2450 - total flux cleaned = -0.00332526 Jy ! Component: 2500 - total flux cleaned = -0.00336045 Jy ! Component: 2550 - total flux cleaned = -0.00341837 Jy ! Component: 2600 - total flux cleaned = -0.00344131 Jy ! Component: 2650 - total flux cleaned = -0.00349823 Jy ! Component: 2700 - total flux cleaned = -0.00355438 Jy ! Component: 2750 - total flux cleaned = -0.00359912 Jy ! Component: 2800 - total flux cleaned = -0.00367653 Jy ! Component: 2850 - total flux cleaned = -0.0036984 Jy ! Component: 2900 - total flux cleaned = -0.00376345 Jy ! Component: 2950 - total flux cleaned = -0.00379567 Jy ! Component: 3000 - total flux cleaned = -0.0038277 Jy ! Component: 3050 - total flux cleaned = -0.00391223 Jy ! Component: 3100 - total flux cleaned = -0.00396457 Jy ! Component: 3150 - total flux cleaned = -0.00401645 Jy ! Component: 3200 - total flux cleaned = -0.00404732 Jy ! Component: 3250 - total flux cleaned = -0.00411882 Jy ! Component: 3300 - total flux cleaned = -0.00414908 Jy ! Component: 3350 - total flux cleaned = -0.00419929 Jy ! Component: 3400 - total flux cleaned = -0.00425923 Jy ! Component: 3450 - total flux cleaned = -0.00426923 Jy ! Component: 3500 - total flux cleaned = -0.00431839 Jy ! Component: 3550 - total flux cleaned = -0.00434765 Jy ! Component: 3600 - total flux cleaned = -0.00436708 Jy ! Component: 3650 - total flux cleaned = -0.00438647 Jy ! Component: 3700 - total flux cleaned = -0.00440564 Jy ! Component: 3750 - total flux cleaned = -0.00446264 Jy ! Component: 3800 - total flux cleaned = -0.00445318 Jy ! Component: 3850 - total flux cleaned = -0.0044625 Jy ! Component: 3900 - total flux cleaned = -0.00448123 Jy ! Component: 3950 - total flux cleaned = -0.0044812 Jy ! Component: 4000 - total flux cleaned = -0.00448114 Jy ! Component: 4050 - total flux cleaned = -0.00447194 Jy ! Total flux subtracted in 4096 components = -0.00448107 Jy ! Clean residual min=-0.000643 max=0.000602 Jy/beam ! Clean residual mean=0.000002 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.0767466 Jy keep ! Adding 224 model components to the UV plane model. ! The established model now contains 287 components and 0.0767466 Jy ![Exited script file: muppet] wmap "J0226-1843_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.003 x 6.622 at -0.614 degrees (North through East) ! Clean map min=-0.0017222 max=0.072284 Jy/beam ! Writing clean map to FITS file: J0226-1843_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.072284 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000151908 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.630465 0.630465 1.26093 2.52186 5.04372 10.0874 20.1749 40.3498 80.6996 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.072 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.003 x 6.622 at -0.614 degrees (North through East) ! Clean map min=-0.0017222 max=0.072284 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0226-1843_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:14:53 2017