! Started logfile: J0225+1134_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:14:44 2017 obs J0225+1134_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0225+1134_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0225+1134 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0225+1134_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.711793Jy sigma=0.010377 ! Fit after self-cal, rms=0.683315Jy sigma=0.009925 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.011 mas, bmaj=5.63 mas, bpa=-0.6669 degrees ! Estimated noise=1000.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.243295 Jy ! Component: 100 - total flux cleaned = 0.296937 Jy ! Total flux subtracted in 100 components = 0.296937 Jy ! Clean residual min=-0.015929 max=0.017948 Jy/beam ! Clean residual mean=-0.000025 rms=0.003770 Jy/beam ! Combined flux in latest and established models = 0.296937 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.296937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093274Jy sigma=0.001145 ! Fit after self-cal, rms=0.093268Jy sigma=0.001145 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.662 mas, bmaj=6.323 mas, bpa=-0.2226 degrees ! Estimated noise=660.062 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.023499 Jy ! Component: 100 - total flux cleaned = 0.0360854 Jy ! Component: 150 - total flux cleaned = 0.0443142 Jy ! Component: 200 - total flux cleaned = 0.04837 Jy ! Total flux subtracted in 200 components = 0.04837 Jy ! Clean residual min=-0.010773 max=0.015997 Jy/beam ! Clean residual mean=-0.000076 rms=0.003207 Jy/beam ! Combined flux in latest and established models = 0.345307 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 27 components and 0.345307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085568Jy sigma=0.001077 ! Fit after self-cal, rms=0.085436Jy sigma=0.001076 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* KP 1.00* LA 0.97 ! MK 1.02 NL 0.96 OV 0.98 PT 0.99 ! SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* KP 1.00* LA 0.96 ! MK 1.01 NL 1.02 OV 1.02 PT 0.97 ! SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* KP 1.00* LA 0.79 ! MK 1.03 NL 0.98 OV 0.95 PT 0.94 ! SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 1.00* KP 1.00* LA 0.88 ! MK 1.00 NL 1.09 OV 1.02 PT 0.99 ! SC 0.92 ! ! ! Fit before self-cal, rms=0.085436Jy sigma=0.001076 ! Fit after self-cal, rms=0.073373Jy sigma=0.000933 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.63 mas, bmaj=6.395 mas, bpa=0.86 degrees ! Estimated noise=658.373 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, 17.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00911919 Jy ! Component: 100 - total flux cleaned = 0.0137549 Jy ! Component: 150 - total flux cleaned = 0.0155171 Jy ! Component: 200 - total flux cleaned = 0.0160832 Jy ! Total flux subtracted in 200 components = 0.0160832 Jy ! Clean residual min=-0.004400 max=0.004339 Jy/beam ! Clean residual mean=0.000020 rms=0.001120 Jy/beam ! Combined flux in latest and established models = 0.36139 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 47 components and 0.36139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072028Jy sigma=0.000917 ! Fit after self-cal, rms=0.071568Jy sigma=0.000915 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071568Jy sigma=0.000915 ! Fit after self-cal, rms=0.071261Jy sigma=0.000908 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.624 mas, bmaj=6.379 mas, bpa=0.6306 degrees ! Estimated noise=658.616 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347435 Jy ! Component: 100 - total flux cleaned = 0.00529553 Jy ! Component: 150 - total flux cleaned = 0.00593124 Jy ! Component: 200 - total flux cleaned = 0.00652217 Jy ! Total flux subtracted in 200 components = 0.00652217 Jy ! Clean residual min=-0.002976 max=0.003374 Jy/beam ! Clean residual mean=0.000001 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.367912 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 71 components and 0.367912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071021Jy sigma=0.000905 ! Fit after self-cal, rms=0.071002Jy sigma=0.000905 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113583 Jy ! Component: 100 - total flux cleaned = 0.00153995 Jy ! Component: 150 - total flux cleaned = 0.00162849 Jy ! Component: 200 - total flux cleaned = 0.00163064 Jy ! Total flux subtracted in 200 components = 0.00163064 Jy ! Clean residual min=-0.002879 max=0.002972 Jy/beam ! Clean residual mean=0.000003 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.369543 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 81 components and 0.369543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070936Jy sigma=0.000904 ! Fit after self-cal, rms=0.070927Jy sigma=0.000904 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070927Jy sigma=0.000904 ! Fit after self-cal, rms=0.070864Jy sigma=0.000904 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.626 mas, bmaj=6.376 mas, bpa=0.5855 degrees ! Estimated noise=657.815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160781 Jy ! Component: 100 - total flux cleaned = 0.00201492 Jy ! Component: 150 - total flux cleaned = 0.00220407 Jy ! Component: 200 - total flux cleaned = 0.0022726 Jy ! Total flux subtracted in 200 components = 0.0022726 Jy ! Clean residual min=-0.002648 max=0.002481 Jy/beam ! Clean residual mean=-0.000002 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.371816 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 101 components and 0.371816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070804Jy sigma=0.000903 ! Fit after self-cal, rms=0.070806Jy sigma=0.000903 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000465007 Jy ! Component: 100 - total flux cleaned = 0.000525174 Jy ! Component: 150 - total flux cleaned = 0.000578913 Jy ! Component: 200 - total flux cleaned = 0.000628282 Jy ! Total flux subtracted in 200 components = 0.000628282 Jy ! Clean residual min=-0.002570 max=0.002396 Jy/beam ! Clean residual mean=-0.000001 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.372444 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 108 components and 0.372444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070783Jy sigma=0.000903 ! Fit after self-cal, rms=0.070779Jy sigma=0.000903 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070779Jy sigma=0.000903 ! Fit after self-cal, rms=0.070775Jy sigma=0.000902 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.449 mas, bmaj=10.66 mas, bpa=7.105 degrees ! Estimated noise=772.371 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000887875 Jy ! Component: 100 - total flux cleaned = 0.000973332 Jy ! Component: 150 - total flux cleaned = 0.000921754 Jy ! Component: 200 - total flux cleaned = 0.000828722 Jy ! Total flux subtracted in 200 components = 0.000828722 Jy ! Clean residual min=-0.002454 max=0.002644 Jy/beam ! Clean residual mean=-0.000009 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.373273 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 123 components and 0.373273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070762Jy sigma=0.000902 ! Fit after self-cal, rms=0.070759Jy sigma=0.000902 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000393433 Jy ! Component: 100 - total flux cleaned = 0.000472215 Jy ! Component: 150 - total flux cleaned = 0.000434416 Jy ! Component: 200 - total flux cleaned = 0.000418067 Jy ! Total flux subtracted in 200 components = 0.000418067 Jy ! Clean residual min=-0.002388 max=0.002560 Jy/beam ! Clean residual mean=-0.000008 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.373691 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 132 components and 0.373691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070755Jy sigma=0.000902 ! Fit after self-cal, rms=0.070750Jy sigma=0.000902 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.627 mas, bmaj=6.374 mas, bpa=0.5661 degrees ! Estimated noise=657.34 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.627 x 6.374 at 0.5661 degrees (North through East) ! Clean map min=-0.0021108 max=0.30723 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.976 mas, bmaj=5.648 mas, bpa=-0.1181 degrees ! Estimated noise=992.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.241282 Jy ! Component: 100 - total flux cleaned = 0.294495 Jy ! Component: 150 - total flux cleaned = 0.314929 Jy ! Component: 200 - total flux cleaned = 0.327695 Jy ! Total flux subtracted in 200 components = 0.327695 Jy ! Clean residual min=-0.007142 max=0.007471 Jy/beam ! Clean residual mean=-0.000017 rms=0.001610 Jy/beam ! Combined flux in latest and established models = 0.327695 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.327695 Jy ! Inverting map and beam ! Estimated beam: bmin=3.627 mas, bmaj=6.374 mas, bpa=0.5661 degrees ! Estimated noise=657.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107418 Jy ! Component: 100 - total flux cleaned = 0.0178887 Jy ! Component: 150 - total flux cleaned = 0.0233615 Jy ! Component: 200 - total flux cleaned = 0.0277559 Jy ! Total flux subtracted in 200 components = 0.0277559 Jy ! Clean residual min=-0.003430 max=0.004389 Jy/beam ! Clean residual mean=-0.000029 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 0.355451 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 67 components and 0.355451 Jy ! Inverting map ! Added new window around map position (5, 28). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00422165 Jy ! Component: 100 - total flux cleaned = 0.00727721 Jy ! Component: 150 - total flux cleaned = 0.0098129 Jy ! Component: 200 - total flux cleaned = 0.011953 Jy ! Total flux subtracted in 200 components = 0.011953 Jy ! Clean residual min=-0.002555 max=0.002355 Jy/beam ! Clean residual mean=-0.000017 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.367404 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 92 components and 0.367404 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.449 mas, bmaj=10.66 mas, bpa=7.105 degrees ! Estimated noise=772.371 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254634 Jy ! Component: 100 - total flux cleaned = 0.00416121 Jy ! Component: 150 - total flux cleaned = 0.00472682 Jy ! Component: 200 - total flux cleaned = 0.00514778 Jy ! Total flux subtracted in 200 components = 0.00514778 Jy ! Clean residual min=-0.002161 max=0.002007 Jy/beam ! Clean residual mean=-0.000022 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.372552 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285093 Jy ! Component: 100 - total flux cleaned = 0.000437957 Jy ! Component: 150 - total flux cleaned = 0.000543914 Jy ! Component: 200 - total flux cleaned = 0.000638557 Jy ! Total flux subtracted in 200 components = 0.000638557 Jy ! Clean residual min=-0.002080 max=0.001880 Jy/beam ! Clean residual mean=-0.000021 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.373191 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 150 components and 0.37319 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.627 mas, bmaj=6.374 mas, bpa=0.5661 degrees ! Estimated noise=657.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.87155e-05 Jy ! Component: 100 - total flux cleaned = 0.000421379 Jy ! Component: 150 - total flux cleaned = 0.000571347 Jy ! Component: 200 - total flux cleaned = 0.000671962 Jy ! Total flux subtracted in 200 components = 0.000671962 Jy ! Clean residual min=-0.002128 max=0.001981 Jy/beam ! Clean residual mean=-0.000009 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.373862 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 175 components and 0.373862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070722Jy sigma=0.000901 ! Fit after self-cal, rms=0.070699Jy sigma=0.000901 wmodel J0225+1134_S_2014_01_04_pus_map.mod ! Writing 175 model components to file: J0225+1134_S_2014_01_04_pus_map.mod wobs J0225+1134_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0225+1134_S_2014_01_04_pus_uvs.fits wwins J0225+1134_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J0225+1134_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110831 Jy ! Component: 100 - total flux cleaned = -0.000239939 Jy ! Component: 150 - total flux cleaned = -0.000457344 Jy ! Component: 200 - total flux cleaned = -0.000663203 Jy ! Component: 250 - total flux cleaned = -0.000718765 Jy ! Component: 300 - total flux cleaned = -0.000826639 Jy ! Component: 350 - total flux cleaned = -0.000931108 Jy ! Component: 400 - total flux cleaned = -0.000905536 Jy ! Component: 450 - total flux cleaned = -0.000880927 Jy ! Component: 500 - total flux cleaned = -0.000833003 Jy ! Component: 550 - total flux cleaned = -0.000833319 Jy ! Component: 600 - total flux cleaned = -0.000787125 Jy ! Component: 650 - total flux cleaned = -0.000810014 Jy ! Component: 700 - total flux cleaned = -0.000810413 Jy ! Component: 750 - total flux cleaned = -0.000832117 Jy ! Component: 800 - total flux cleaned = -0.000811121 Jy ! Component: 850 - total flux cleaned = -0.000831945 Jy ! Component: 900 - total flux cleaned = -0.000832178 Jy ! Component: 950 - total flux cleaned = -0.000891467 Jy ! Component: 1000 - total flux cleaned = -0.000930274 Jy ! Component: 1050 - total flux cleaned = -0.00100626 Jy ! Component: 1100 - total flux cleaned = -0.00104375 Jy ! Component: 1150 - total flux cleaned = -0.00108013 Jy ! Component: 1200 - total flux cleaned = -0.0010982 Jy ! Component: 1250 - total flux cleaned = -0.00111588 Jy ! Component: 1300 - total flux cleaned = -0.0010986 Jy ! Component: 1350 - total flux cleaned = -0.00121926 Jy ! Component: 1400 - total flux cleaned = -0.00118517 Jy ! Component: 1450 - total flux cleaned = -0.00121832 Jy ! Component: 1500 - total flux cleaned = -0.00128434 Jy ! Component: 1550 - total flux cleaned = -0.00131666 Jy ! Component: 1600 - total flux cleaned = -0.0013004 Jy ! Component: 1650 - total flux cleaned = -0.00134768 Jy ! Component: 1700 - total flux cleaned = -0.00131627 Jy ! Component: 1750 - total flux cleaned = -0.00134718 Jy ! Component: 1800 - total flux cleaned = -0.00134754 Jy ! Component: 1850 - total flux cleaned = -0.00131747 Jy ! Component: 1900 - total flux cleaned = -0.00134732 Jy ! Component: 1950 - total flux cleaned = -0.00136183 Jy ! Component: 2000 - total flux cleaned = -0.00131842 Jy ! Component: 2050 - total flux cleaned = -0.00131826 Jy ! Component: 2100 - total flux cleaned = -0.00126174 Jy ! Component: 2150 - total flux cleaned = -0.00126167 Jy ! Component: 2200 - total flux cleaned = -0.0012066 Jy ! Component: 2250 - total flux cleaned = -0.00112466 Jy ! Component: 2300 - total flux cleaned = -0.001057 Jy ! Component: 2350 - total flux cleaned = -0.000990236 Jy ! Component: 2400 - total flux cleaned = -0.000976999 Jy ! Component: 2450 - total flux cleaned = -0.000884988 Jy ! Component: 2500 - total flux cleaned = -0.000845835 Jy ! Component: 2550 - total flux cleaned = -0.000768399 Jy ! Component: 2600 - total flux cleaned = -0.0007046 Jy ! Component: 2650 - total flux cleaned = -0.000666608 Jy ! Component: 2700 - total flux cleaned = -0.000591206 Jy ! Component: 2750 - total flux cleaned = -0.000528917 Jy ! Component: 2800 - total flux cleaned = -0.000442705 Jy ! Component: 2850 - total flux cleaned = -0.000418239 Jy ! Component: 2900 - total flux cleaned = -0.000333307 Jy ! Component: 2950 - total flux cleaned = -0.000297235 Jy ! Component: 3000 - total flux cleaned = -0.000213706 Jy ! Component: 3050 - total flux cleaned = -0.000201922 Jy ! Component: 3100 - total flux cleaned = -0.000107789 Jy ! Component: 3150 - total flux cleaned = -4.94799e-05 Jy ! Component: 3200 - total flux cleaned = -3.17844e-06 Jy ! Component: 3250 - total flux cleaned = -1.47156e-05 Jy ! Component: 3300 - total flux cleaned = 5.40722e-05 Jy ! Component: 3350 - total flux cleaned = 9.95263e-05 Jy ! Component: 3400 - total flux cleaned = 8.82221e-05 Jy ! Component: 3450 - total flux cleaned = 0.000155832 Jy ! Component: 3500 - total flux cleaned = 0.000144708 Jy ! Component: 3550 - total flux cleaned = 0.000244806 Jy ! Component: 3600 - total flux cleaned = 0.000255793 Jy ! Component: 3650 - total flux cleaned = 0.000266832 Jy ! Component: 3700 - total flux cleaned = 0.00033252 Jy ! Component: 3750 - total flux cleaned = 0.000332493 Jy ! Component: 3800 - total flux cleaned = 0.000386626 Jy ! Component: 3850 - total flux cleaned = 0.000408136 Jy ! Component: 3900 - total flux cleaned = 0.000472482 Jy ! Component: 3950 - total flux cleaned = 0.000504589 Jy ! Component: 4000 - total flux cleaned = 0.000557812 Jy ! Component: 4050 - total flux cleaned = 0.000600134 Jy ! Total flux subtracted in 4096 components = 0.000663409 Jy ! Clean residual min=-0.000700 max=0.000901 Jy/beam ! Clean residual mean=0.000003 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.374526 Jy keep ! Adding 238 model components to the UV plane model. ! The established model now contains 413 components and 0.374526 Jy ![Exited script file: muppet] wmap "J0225+1134_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.627 x 6.374 at 0.5661 degrees (North through East) ! Clean map min=-0.0011505 max=0.30824 Jy/beam ! Writing clean map to FITS file: J0225+1134_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.308243 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000178035 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.173274 0.173274 0.346548 0.693096 1.38619 2.77238 5.54476 11.0895 22.1791 44.3581 88.7162 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.308 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.627 x 6.374 at 0.5661 degrees (North through East) ! Clean map min=-0.0011505 max=0.30824 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0225+1134_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:14:48 2017