! Started logfile: J0216-1017_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:14:26 2017 obs J0216-1017_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0216-1017_S_2014_01_04_pus_uva.fits ! AN table 1: 117 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0216-1017 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9828 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0216-1017_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.954714Jy sigma=0.012305 ! Fit after self-cal, rms=0.892756Jy sigma=0.011527 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.484 mas, bmaj=5.694 mas, bpa=0.8457 degrees ! Estimated noise=829.355 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0839729 Jy ! Component: 100 - total flux cleaned = 0.102431 Jy ! Total flux subtracted in 100 components = 0.102431 Jy ! Clean residual min=-0.003936 max=0.005915 Jy/beam ! Clean residual mean=0.000006 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.102431 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.102431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080191Jy sigma=0.000919 ! Fit after self-cal, rms=0.080158Jy sigma=0.000919 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=6.625 mas, bpa=0.3456 degrees ! Estimated noise=580.048 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00852149 Jy ! Component: 100 - total flux cleaned = 0.0124833 Jy ! Component: 150 - total flux cleaned = 0.014763 Jy ! Component: 200 - total flux cleaned = 0.0161664 Jy ! Total flux subtracted in 200 components = 0.0161664 Jy ! Clean residual min=-0.003109 max=0.003576 Jy/beam ! Clean residual mean=0.000006 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.118597 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 24 components and 0.118597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079214Jy sigma=0.000910 ! Fit after self-cal, rms=0.079212Jy sigma=0.000910 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* KP 1.00* LA 1.04 ! MK 1.01 NL 1.02 OV 0.94 PT 0.98 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* KP 1.00* LA 1.01 ! MK 1.00 NL 1.05 OV 1.00 PT 0.97 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* KP 1.00* LA 0.82 ! MK 0.97 NL 1.01 OV 0.93 PT 0.95 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00* KP 1.00* LA 0.87 ! MK 1.02 NL 1.11 OV 1.02 PT 0.98 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.079212Jy sigma=0.000910 ! Fit after self-cal, rms=0.077116Jy sigma=0.000898 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.036 mas, bmaj=6.669 mas, bpa=0.5189 degrees ! Estimated noise=578.551 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157312 Jy ! Component: 100 - total flux cleaned = 0.000119305 Jy ! Component: 150 - total flux cleaned = 0.000118951 Jy ! Component: 200 - total flux cleaned = 0.000134308 Jy ! Total flux subtracted in 200 components = 0.000134308 Jy ! Clean residual min=-0.002006 max=0.002338 Jy/beam ! Clean residual mean=0.000002 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.118731 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 0.118731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077104Jy sigma=0.000898 ! Fit after self-cal, rms=0.076895Jy sigma=0.000898 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076895Jy sigma=0.000898 ! Fit after self-cal, rms=0.077032Jy sigma=0.000897 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.032 mas, bmaj=6.679 mas, bpa=0.5126 degrees ! Estimated noise=578.226 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.15464e-05 Jy ! Component: 100 - total flux cleaned = 0.000111971 Jy ! Component: 150 - total flux cleaned = 0.000126036 Jy ! Component: 200 - total flux cleaned = 0.000153319 Jy ! Total flux subtracted in 200 components = 0.000153319 Jy ! Clean residual min=-0.001816 max=0.002047 Jy/beam ! Clean residual mean=0.000003 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.118885 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.118885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077025Jy sigma=0.000897 ! Fit after self-cal, rms=0.077024Jy sigma=0.000897 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-39, -121.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184606 Jy ! Component: 100 - total flux cleaned = 0.00238188 Jy ! Component: 150 - total flux cleaned = 0.00252199 Jy ! Component: 200 - total flux cleaned = 0.00259219 Jy ! Total flux subtracted in 200 components = 0.00259219 Jy ! Clean residual min=-0.001629 max=0.001859 Jy/beam ! Clean residual mean=0.000003 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.121477 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.121477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076970Jy sigma=0.000896 ! Fit after self-cal, rms=0.076976Jy sigma=0.000896 ! Inverting map ! Added new window around map position (7.5, 22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136604 Jy ! Component: 100 - total flux cleaned = 0.00178502 Jy ! Component: 150 - total flux cleaned = 0.00193115 Jy ! Component: 200 - total flux cleaned = 0.00195763 Jy ! Total flux subtracted in 200 components = 0.00195763 Jy ! Clean residual min=-0.001475 max=0.001616 Jy/beam ! Clean residual mean=0.000002 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.123435 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 65 components and 0.123435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076936Jy sigma=0.000896 ! Fit after self-cal, rms=0.076934Jy sigma=0.000895 ! Inverting map ! Added new window around map position (-111.5, -66). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000701985 Jy ! Component: 100 - total flux cleaned = 0.000988207 Jy ! Component: 150 - total flux cleaned = 0.000987733 Jy ! Component: 200 - total flux cleaned = 0.00101565 Jy ! Total flux subtracted in 200 components = 0.00101565 Jy ! Clean residual min=-0.001419 max=0.001297 Jy/beam ! Clean residual mean=0.000002 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.12445 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 78 components and 0.12445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076890Jy sigma=0.000895 ! Fit after self-cal, rms=0.076897Jy sigma=0.000895 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076897Jy sigma=0.000895 ! Fit after self-cal, rms=0.076685Jy sigma=0.000895 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=6.675 mas, bpa=0.5478 degrees ! Estimated noise=576.674 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00068864 Jy ! Component: 100 - total flux cleaned = 0.000801921 Jy ! Component: 150 - total flux cleaned = 0.000829276 Jy ! Component: 200 - total flux cleaned = 0.000829997 Jy ! Total flux subtracted in 200 components = 0.000829997 Jy ! Clean residual min=-0.001383 max=0.001328 Jy/beam ! Clean residual mean=0.000001 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.12528 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 86 components and 0.12528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076664Jy sigma=0.000895 ! Fit after self-cal, rms=0.076682Jy sigma=0.000895 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000177752 Jy ! Component: 100 - total flux cleaned = 0.000134487 Jy ! Component: 150 - total flux cleaned = 0.000114417 Jy ! Component: 200 - total flux cleaned = 9.50414e-05 Jy ! Total flux subtracted in 200 components = 9.50414e-05 Jy ! Clean residual min=-0.001392 max=0.001277 Jy/beam ! Clean residual mean=0.000001 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.125375 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 96 components and 0.125375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076670Jy sigma=0.000894 ! Fit after self-cal, rms=0.076672Jy sigma=0.000894 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076672Jy sigma=0.000894 ! Fit after self-cal, rms=0.076680Jy sigma=0.000894 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.649 mas, bmaj=13.85 mas, bpa=6.458 degrees ! Estimated noise=698.382 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000357333 Jy ! Component: 100 - total flux cleaned = 0.00028474 Jy ! Component: 150 - total flux cleaned = 0.000233113 Jy ! Component: 200 - total flux cleaned = 0.000198032 Jy ! Total flux subtracted in 200 components = 0.000198032 Jy ! Clean residual min=-0.001066 max=0.001089 Jy/beam ! Clean residual mean=0.000002 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.125573 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 119 components and 0.125573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076677Jy sigma=0.000894 ! Fit after self-cal, rms=0.076680Jy sigma=0.000894 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.3466e-05 Jy ! Component: 100 - total flux cleaned = 4.39968e-05 Jy ! Component: 150 - total flux cleaned = 2.28656e-05 Jy ! Component: 200 - total flux cleaned = 3.40735e-06 Jy ! Total flux subtracted in 200 components = 3.40735e-06 Jy ! Clean residual min=-0.001036 max=0.001082 Jy/beam ! Clean residual mean=0.000002 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.125577 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 123 components and 0.125577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076678Jy sigma=0.000894 ! Fit after self-cal, rms=0.076678Jy sigma=0.000894 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.032 mas, bmaj=6.676 mas, bpa=0.5643 degrees ! Estimated noise=576.604 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.032 x 6.676 at 0.5643 degrees (North through East) ! Clean map min=-0.00148 max=0.10812 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.472 mas, bmaj=5.724 mas, bpa=0.9013 degrees ! Estimated noise=828.333 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0838584 Jy ! Component: 100 - total flux cleaned = 0.10235 Jy ! Component: 150 - total flux cleaned = 0.109007 Jy ! Component: 200 - total flux cleaned = 0.112877 Jy ! Total flux subtracted in 200 components = 0.112877 Jy ! Clean residual min=-0.002815 max=0.002812 Jy/beam ! Clean residual mean=0.000003 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.112877 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.112877 Jy ! Inverting map and beam ! Estimated beam: bmin=3.032 mas, bmaj=6.676 mas, bpa=0.5643 degrees ! Estimated noise=576.604 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00346967 Jy ! Component: 100 - total flux cleaned = 0.00585476 Jy ! Component: 150 - total flux cleaned = 0.00766246 Jy ! Component: 200 - total flux cleaned = 0.00874751 Jy ! Total flux subtracted in 200 components = 0.00874751 Jy ! Clean residual min=-0.001690 max=0.001636 Jy/beam ! Clean residual mean=0.000004 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.121624 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 39 components and 0.121624 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.649 mas, bmaj=13.85 mas, bpa=6.458 degrees ! Estimated noise=698.382 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160191 Jy ! Component: 100 - total flux cleaned = 0.00213036 Jy ! Component: 150 - total flux cleaned = 0.00251301 Jy ! Component: 200 - total flux cleaned = 0.00272737 Jy ! Total flux subtracted in 200 components = 0.00272737 Jy ! Clean residual min=-0.001383 max=0.001177 Jy/beam ! Clean residual mean=0.000004 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.124351 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118315 Jy ! Component: 100 - total flux cleaned = 0.000226738 Jy ! Component: 150 - total flux cleaned = 0.00034469 Jy ! Component: 200 - total flux cleaned = 0.000452676 Jy ! Total flux subtracted in 200 components = 0.000452676 Jy ! Clean residual min=-0.001241 max=0.001132 Jy/beam ! Clean residual mean=0.000003 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.124804 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 100 components and 0.124804 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.032 mas, bmaj=6.676 mas, bpa=0.5643 degrees ! Estimated noise=576.604 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00045465 Jy ! Component: 100 - total flux cleaned = 0.000624737 Jy ! Component: 150 - total flux cleaned = 0.000772136 Jy ! Component: 200 - total flux cleaned = 0.00077038 Jy ! Total flux subtracted in 200 components = 0.00077038 Jy ! Clean residual min=-0.001413 max=0.001237 Jy/beam ! Clean residual mean=0.000001 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.125574 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 122 components and 0.125574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076721Jy sigma=0.000895 ! Fit after self-cal, rms=0.076698Jy sigma=0.000895 wmodel J0216-1017_S_2014_01_04_pus_map.mod ! Writing 122 model components to file: J0216-1017_S_2014_01_04_pus_map.mod wobs J0216-1017_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0216-1017_S_2014_01_04_pus_uvs.fits wwins J0216-1017_S_2014_01_04_pus_map.win ! wwins: Wrote 5 windows to J0216-1017_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000638445 Jy ! Component: 100 - total flux cleaned = -0.00100595 Jy ! Component: 150 - total flux cleaned = -0.00115741 Jy ! Component: 200 - total flux cleaned = -0.00128191 Jy ! Component: 250 - total flux cleaned = -0.00140235 Jy ! Component: 300 - total flux cleaned = -0.00149911 Jy ! Component: 350 - total flux cleaned = -0.0015554 Jy ! Component: 400 - total flux cleaned = -0.00159234 Jy ! Component: 450 - total flux cleaned = -0.00166383 Jy ! Component: 500 - total flux cleaned = -0.00169845 Jy ! Component: 550 - total flux cleaned = -0.00173269 Jy ! Component: 600 - total flux cleaned = -0.00176579 Jy ! Component: 650 - total flux cleaned = -0.0017334 Jy ! Component: 700 - total flux cleaned = -0.00173345 Jy ! Component: 750 - total flux cleaned = -0.00174906 Jy ! Component: 800 - total flux cleaned = -0.00179471 Jy ! Component: 850 - total flux cleaned = -0.00174955 Jy ! Component: 900 - total flux cleaned = -0.00177913 Jy ! Component: 950 - total flux cleaned = -0.00179375 Jy ! Component: 1000 - total flux cleaned = -0.00177948 Jy ! Component: 1050 - total flux cleaned = -0.00177943 Jy ! Component: 1100 - total flux cleaned = -0.00177952 Jy ! Component: 1150 - total flux cleaned = -0.0018066 Jy ! Component: 1200 - total flux cleaned = -0.00187367 Jy ! Component: 1250 - total flux cleaned = -0.00187359 Jy ! Component: 1300 - total flux cleaned = -0.00186087 Jy ! Component: 1350 - total flux cleaned = -0.0019122 Jy ! Component: 1400 - total flux cleaned = -0.00195022 Jy ! Component: 1450 - total flux cleaned = -0.00201265 Jy ! Component: 1500 - total flux cleaned = -0.00204966 Jy ! Component: 1550 - total flux cleaned = -0.00208627 Jy ! Component: 1600 - total flux cleaned = -0.00218288 Jy ! Component: 1650 - total flux cleaned = -0.00221863 Jy ! Component: 1700 - total flux cleaned = -0.00232461 Jy ! Component: 1750 - total flux cleaned = -0.00239446 Jy ! Component: 1800 - total flux cleaned = -0.00245221 Jy ! Component: 1850 - total flux cleaned = -0.00249805 Jy ! Component: 1900 - total flux cleaned = -0.0025434 Jy ! Component: 1950 - total flux cleaned = -0.00261067 Jy ! Component: 2000 - total flux cleaned = -0.0026329 Jy ! Component: 2050 - total flux cleaned = -0.00272088 Jy ! Component: 2100 - total flux cleaned = -0.00276452 Jy ! Component: 2150 - total flux cleaned = -0.00281847 Jy ! Component: 2200 - total flux cleaned = -0.0028398 Jy ! Component: 2250 - total flux cleaned = -0.00288227 Jy ! Component: 2300 - total flux cleaned = -0.00290336 Jy ! Component: 2350 - total flux cleaned = -0.00295528 Jy ! Component: 2400 - total flux cleaned = -0.00299648 Jy ! Component: 2450 - total flux cleaned = -0.00300673 Jy ! Component: 2500 - total flux cleaned = -0.00304731 Jy ! Component: 2550 - total flux cleaned = -0.00307739 Jy ! Component: 2600 - total flux cleaned = -0.00314688 Jy ! Component: 2650 - total flux cleaned = -0.00315667 Jy ! Component: 2700 - total flux cleaned = -0.00315679 Jy ! Component: 2750 - total flux cleaned = -0.00322473 Jy ! Component: 2800 - total flux cleaned = -0.003244 Jy ! Component: 2850 - total flux cleaned = -0.00324398 Jy ! Component: 2900 - total flux cleaned = -0.00327248 Jy ! Component: 2950 - total flux cleaned = -0.00329128 Jy ! Component: 3000 - total flux cleaned = -0.00331929 Jy ! Component: 3050 - total flux cleaned = -0.00334715 Jy ! Component: 3100 - total flux cleaned = -0.00338399 Jy ! Component: 3150 - total flux cleaned = -0.00342962 Jy ! Component: 3200 - total flux cleaned = -0.00342053 Jy ! Component: 3250 - total flux cleaned = -0.00345667 Jy ! Component: 3300 - total flux cleaned = -0.00347456 Jy ! Component: 3350 - total flux cleaned = -0.0034745 Jy ! Component: 3400 - total flux cleaned = -0.00351001 Jy ! Component: 3450 - total flux cleaned = -0.00354532 Jy ! Component: 3500 - total flux cleaned = -0.00354537 Jy ! Component: 3550 - total flux cleaned = -0.00357161 Jy ! Component: 3600 - total flux cleaned = -0.00360637 Jy ! Component: 3650 - total flux cleaned = -0.00360638 Jy ! Component: 3700 - total flux cleaned = -0.00364079 Jy ! Component: 3750 - total flux cleaned = -0.00365788 Jy ! Component: 3800 - total flux cleaned = -0.003692 Jy ! Component: 3850 - total flux cleaned = -0.00371741 Jy ! Component: 3900 - total flux cleaned = -0.00375963 Jy ! Component: 3950 - total flux cleaned = -0.00377647 Jy ! Component: 4000 - total flux cleaned = -0.00379328 Jy ! Component: 4050 - total flux cleaned = -0.00382679 Jy ! Total flux subtracted in 4096 components = -0.00386015 Jy ! Clean residual min=-0.000497 max=0.000696 Jy/beam ! Clean residual mean=0.000001 rms=0.000140 Jy/beam ! Combined flux in latest and established models = 0.121714 Jy keep ! Adding 233 model components to the UV plane model. ! The established model now contains 355 components and 0.121714 Jy ![Exited script file: muppet] wmap "J0216-1017_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.032 x 6.676 at 0.5643 degrees (North through East) ! Clean map min=-0.0011605 max=0.1089 Jy/beam ! Writing clean map to FITS file: J0216-1017_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.108904 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000136485 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.37598 0.37598 0.751959 1.50392 3.00784 6.01567 12.0313 24.0627 48.1254 96.2508 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.108 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.032 x 6.676 at 0.5643 degrees (North through East) ! Clean map min=-0.0011605 max=0.1089 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0216-1017_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:14:30 2017