! Started logfile: J0215-0343_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:02:10 2017 obs J0215-0343_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0215-0343_S_2015_01_23_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.793684 visibilities/baseline/integration-bin. ! Found source: J0215-0343 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 13572 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0215-0343_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.956330Jy sigma=0.009749 ! Fit after self-cal, rms=0.929515Jy sigma=0.009577 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=6.539 mas, bpa=6.089 degrees ! Estimated noise=922.744 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.060297 Jy ! Component: 100 - total flux cleaned = 0.0742608 Jy ! Total flux subtracted in 100 components = 0.0742608 Jy ! Clean residual min=-0.006359 max=0.008012 Jy/beam ! Clean residual mean=0.000004 rms=0.001600 Jy/beam ! Combined flux in latest and established models = 0.0742608 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0742608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135124Jy sigma=0.000806 ! Fit after self-cal, rms=0.135061Jy sigma=0.000806 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=7.667 mas, bpa=6.287 degrees ! Estimated noise=634.747 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-44, 50). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00898385 Jy ! Component: 100 - total flux cleaned = 0.0142498 Jy ! Component: 150 - total flux cleaned = 0.0180316 Jy ! Component: 200 - total flux cleaned = 0.0208327 Jy ! Total flux subtracted in 200 components = 0.0208327 Jy ! Clean residual min=-0.004735 max=0.005734 Jy/beam ! Clean residual mean=0.000002 rms=0.001379 Jy/beam ! Combined flux in latest and established models = 0.0950936 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 42 components and 0.0950936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134240Jy sigma=0.000794 ! Fit after self-cal, rms=0.134177Jy sigma=0.000792 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.18 HN 0.95 KP 1.03 ! LA 1.16 MK 1.00 NL 1.19 OV 0.93 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.40 HN 1.04 KP 0.96 ! LA 1.15 MK 1.10 NL 1.24 OV 0.97 ! PT 0.92 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.54 HN 0.97 KP 0.85 ! LA 0.93 MK 1.16 NL 1.35 OV 0.86 ! PT 0.92 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.31 HN 0.97 KP 0.78 ! LA 0.94 MK 1.12 NL 0.94 OV 0.91 ! PT 0.99 SC 0.99 ! ! ! Fit before self-cal, rms=0.134177Jy sigma=0.000792 ! Fit after self-cal, rms=0.173048Jy sigma=0.000780 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.804 mas, bmaj=7.738 mas, bpa=7.242 degrees ! Estimated noise=638.919 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 57). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00458646 Jy ! Component: 100 - total flux cleaned = 0.00666603 Jy ! Component: 150 - total flux cleaned = 0.00759381 Jy ! Component: 200 - total flux cleaned = 0.00804291 Jy ! Total flux subtracted in 200 components = 0.00804291 Jy ! Clean residual min=-0.003237 max=0.003965 Jy/beam ! Clean residual mean=0.000008 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.103136 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 71 components and 0.103136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172773Jy sigma=0.000777 ! Fit after self-cal, rms=0.173056Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173056Jy sigma=0.000776 ! Fit after self-cal, rms=0.123841Jy sigma=0.000772 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.802 mas, bmaj=7.732 mas, bpa=7.02 degrees ! Estimated noise=635.438 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000234703 Jy ! Component: 100 - total flux cleaned = 0.000288084 Jy ! Component: 150 - total flux cleaned = 0.000332758 Jy ! Component: 200 - total flux cleaned = 0.000592489 Jy ! Total flux subtracted in 200 components = 0.000592489 Jy ! Clean residual min=-0.002675 max=0.002760 Jy/beam ! Clean residual mean=0.000006 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.103729 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 93 components and 0.103729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123791Jy sigma=0.000771 ! Fit after self-cal, rms=0.123717Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000529747 Jy ! Component: 100 - total flux cleaned = 0.00060921 Jy ! Component: 150 - total flux cleaned = 0.000716341 Jy ! Component: 200 - total flux cleaned = 0.000816583 Jy ! Total flux subtracted in 200 components = 0.000816583 Jy ! Clean residual min=-0.002500 max=0.002765 Jy/beam ! Clean residual mean=0.000005 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.104546 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 108 components and 0.104546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123689Jy sigma=0.000771 ! Fit after self-cal, rms=0.123686Jy sigma=0.000771 ! Inverting map ! Added new window around map position (14, -70). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025907 Jy ! Component: 100 - total flux cleaned = 0.00389182 Jy ! Component: 150 - total flux cleaned = 0.00460725 Jy ! Component: 200 - total flux cleaned = 0.00523768 Jy ! Total flux subtracted in 200 components = 0.00523768 Jy ! Clean residual min=-0.002357 max=0.002112 Jy/beam ! Clean residual mean=0.000005 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.109783 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 126 components and 0.109783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123615Jy sigma=0.000770 ! Fit after self-cal, rms=0.123595Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123595Jy sigma=0.000770 ! Fit after self-cal, rms=0.122505Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.807 mas, bmaj=7.758 mas, bpa=7.106 degrees ! Estimated noise=635.076 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142196 Jy ! Component: 100 - total flux cleaned = 0.0021387 Jy ! Component: 150 - total flux cleaned = 0.00236448 Jy ! Component: 200 - total flux cleaned = 0.0027027 Jy ! Total flux subtracted in 200 components = 0.0027027 Jy ! Clean residual min=-0.002233 max=0.001957 Jy/beam ! Clean residual mean=0.000005 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.112486 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 134 components and 0.112486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122469Jy sigma=0.000769 ! Fit after self-cal, rms=0.122458Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000795753 Jy ! Component: 100 - total flux cleaned = 0.00119482 Jy ! Component: 150 - total flux cleaned = 0.00150371 Jy ! Component: 200 - total flux cleaned = 0.00179393 Jy ! Total flux subtracted in 200 components = 0.00179393 Jy ! Clean residual min=-0.002215 max=0.001910 Jy/beam ! Clean residual mean=0.000005 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.11428 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 146 components and 0.11428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122433Jy sigma=0.000769 ! Fit after self-cal, rms=0.122431Jy sigma=0.000769 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122431Jy sigma=0.000769 ! Fit after self-cal, rms=0.122601Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.166 mas, bmaj=11.67 mas, bpa=-2.313 degrees ! Estimated noise=780.901 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000939809 Jy ! Component: 100 - total flux cleaned = 0.00120828 Jy ! Component: 150 - total flux cleaned = 0.00123872 Jy ! Component: 200 - total flux cleaned = 0.00126879 Jy ! Total flux subtracted in 200 components = 0.00126879 Jy ! Clean residual min=-0.002562 max=0.002718 Jy/beam ! Clean residual mean=0.000009 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.115549 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 170 components and 0.115549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122585Jy sigma=0.000769 ! Fit after self-cal, rms=0.122594Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000149917 Jy ! Component: 100 - total flux cleaned = 0.000150235 Jy ! Component: 150 - total flux cleaned = 0.000203626 Jy ! Component: 200 - total flux cleaned = 0.000280674 Jy ! Total flux subtracted in 200 components = 0.000280674 Jy ! Clean residual min=-0.002570 max=0.002727 Jy/beam ! Clean residual mean=0.000009 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.115829 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 182 components and 0.115829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122580Jy sigma=0.000769 ! Fit after self-cal, rms=0.122579Jy sigma=0.000769 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.811 mas, bmaj=7.775 mas, bpa=7.142 degrees ! Estimated noise=635.527 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.811 x 7.775 at 7.142 degrees (North through East) ! Clean map min=-0.0020597 max=0.075321 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.171 mas, bmaj=6.665 mas, bpa=7.258 degrees ! Estimated noise=908.852 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0587586 Jy ! Component: 100 - total flux cleaned = 0.073144 Jy ! Component: 150 - total flux cleaned = 0.0811789 Jy ! Component: 200 - total flux cleaned = 0.0869434 Jy ! Total flux subtracted in 200 components = 0.0869434 Jy ! Clean residual min=-0.003872 max=0.004775 Jy/beam ! Clean residual mean=0.000006 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.0869434 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0869434 Jy ! Inverting map and beam ! Estimated beam: bmin=3.811 mas, bmaj=7.775 mas, bpa=7.142 degrees ! Estimated noise=635.527 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00621578 Jy ! Component: 100 - total flux cleaned = 0.0105678 Jy ! Component: 150 - total flux cleaned = 0.0139831 Jy ! Component: 200 - total flux cleaned = 0.0167315 Jy ! Total flux subtracted in 200 components = 0.0167315 Jy ! Clean residual min=-0.002527 max=0.002982 Jy/beam ! Clean residual mean=0.000006 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.103675 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 62 components and 0.103675 Jy ! Inverting map ! Added new window around map position (-32, -46). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00278722 Jy ! Component: 100 - total flux cleaned = 0.00487637 Jy ! Component: 150 - total flux cleaned = 0.00666456 Jy ! Component: 200 - total flux cleaned = 0.00822203 Jy ! Total flux subtracted in 200 components = 0.00822203 Jy ! Clean residual min=-0.002177 max=0.001966 Jy/beam ! Clean residual mean=0.000005 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.111897 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 93 components and 0.111897 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.166 mas, bmaj=11.67 mas, bpa=-2.313 degrees ! Estimated noise=780.901 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224171 Jy ! Component: 100 - total flux cleaned = 0.00400704 Jy ! Component: 150 - total flux cleaned = 0.00544144 Jy ! Component: 200 - total flux cleaned = 0.00622825 Jy ! Total flux subtracted in 200 components = 0.00622825 Jy ! Clean residual min=-0.002324 max=0.001948 Jy/beam ! Clean residual mean=0.000009 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.118125 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000805756 Jy ! Component: 100 - total flux cleaned = 0.00145818 Jy ! Component: 150 - total flux cleaned = 0.00210162 Jy ! Component: 200 - total flux cleaned = 0.00269625 Jy ! Total flux subtracted in 200 components = 0.00269625 Jy ! Clean residual min=-0.002253 max=0.001894 Jy/beam ! Clean residual mean=0.000008 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.120821 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 151 components and 0.120821 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.811 mas, bmaj=7.775 mas, bpa=7.142 degrees ! Estimated noise=635.527 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000177798 Jy ! Component: 100 - total flux cleaned = 0.000618817 Jy ! Component: 150 - total flux cleaned = 0.000939963 Jy ! Component: 200 - total flux cleaned = 0.00123714 Jy ! Total flux subtracted in 200 components = 0.00123714 Jy ! Clean residual min=-0.001950 max=0.001558 Jy/beam ! Clean residual mean=0.000004 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.122059 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 173 components and 0.122059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122569Jy sigma=0.000768 ! Fit after self-cal, rms=0.122563Jy sigma=0.000767 wmodel J0215-0343_S_2015_01_23_pus_map.mod ! Writing 173 model components to file: J0215-0343_S_2015_01_23_pus_map.mod wobs J0215-0343_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0215-0343_S_2015_01_23_pus_uvs.fits wwins J0215-0343_S_2015_01_23_pus_map.win ! wwins: Wrote 6 windows to J0215-0343_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000750089 Jy ! Component: 100 - total flux cleaned = -0.001205 Jy ! Component: 150 - total flux cleaned = -0.0016338 Jy ! Component: 200 - total flux cleaned = -0.00207056 Jy ! Component: 250 - total flux cleaned = -0.00229474 Jy ! Component: 300 - total flux cleaned = -0.00246435 Jy ! Component: 350 - total flux cleaned = -0.00251173 Jy ! Component: 400 - total flux cleaned = -0.0025354 Jy ! Component: 450 - total flux cleaned = -0.00260305 Jy ! Component: 500 - total flux cleaned = -0.00255931 Jy ! Component: 550 - total flux cleaned = -0.00264555 Jy ! Component: 600 - total flux cleaned = -0.00256077 Jy ! Component: 650 - total flux cleaned = -0.00260245 Jy ! Component: 700 - total flux cleaned = -0.00258176 Jy ! Component: 750 - total flux cleaned = -0.00256142 Jy ! Component: 800 - total flux cleaned = -0.00258141 Jy ! Component: 850 - total flux cleaned = -0.002601 Jy ! Component: 900 - total flux cleaned = -0.00267781 Jy ! Component: 950 - total flux cleaned = -0.00269675 Jy ! Component: 1000 - total flux cleaned = -0.00278994 Jy ! Component: 1050 - total flux cleaned = -0.00282642 Jy ! Component: 1100 - total flux cleaned = -0.00286275 Jy ! Component: 1150 - total flux cleaned = -0.00288089 Jy ! Component: 1200 - total flux cleaned = -0.00300526 Jy ! Component: 1250 - total flux cleaned = -0.00300521 Jy ! Component: 1300 - total flux cleaned = -0.00312643 Jy ! Component: 1350 - total flux cleaned = -0.00314351 Jy ! Component: 1400 - total flux cleaned = -0.00310948 Jy ! Component: 1450 - total flux cleaned = -0.003126 Jy ! Component: 1500 - total flux cleaned = -0.00312599 Jy ! Component: 1550 - total flux cleaned = -0.00314238 Jy ! Component: 1600 - total flux cleaned = -0.00315884 Jy ! Component: 1650 - total flux cleaned = -0.00320703 Jy ! Component: 1700 - total flux cleaned = -0.00320694 Jy ! Component: 1750 - total flux cleaned = -0.00323842 Jy ! Component: 1800 - total flux cleaned = -0.00330083 Jy ! Component: 1850 - total flux cleaned = -0.00331631 Jy ! Component: 1900 - total flux cleaned = -0.00339294 Jy ! Component: 1950 - total flux cleaned = -0.00339307 Jy ! Component: 2000 - total flux cleaned = -0.00342314 Jy ! Component: 2050 - total flux cleaned = -0.00346781 Jy ! Component: 2100 - total flux cleaned = -0.00348264 Jy ! Component: 2150 - total flux cleaned = -0.00352645 Jy ! Component: 2200 - total flux cleaned = -0.00354079 Jy ! Component: 2250 - total flux cleaned = -0.0035122 Jy ! Component: 2300 - total flux cleaned = -0.00355489 Jy ! Component: 2350 - total flux cleaned = -0.00348428 Jy ! Component: 2400 - total flux cleaned = -0.00348444 Jy ! Component: 2450 - total flux cleaned = -0.00349844 Jy ! Component: 2500 - total flux cleaned = -0.0034986 Jy ! Component: 2550 - total flux cleaned = -0.00345759 Jy ! Component: 2600 - total flux cleaned = -0.00351187 Jy ! Component: 2650 - total flux cleaned = -0.00344474 Jy ! Component: 2700 - total flux cleaned = -0.00349801 Jy ! Component: 2750 - total flux cleaned = -0.00344508 Jy ! Component: 2800 - total flux cleaned = -0.00347122 Jy ! Component: 2850 - total flux cleaned = -0.00347127 Jy ! Component: 2900 - total flux cleaned = -0.00348413 Jy ! Component: 2950 - total flux cleaned = -0.00344568 Jy ! Component: 3000 - total flux cleaned = -0.00348384 Jy ! Component: 3050 - total flux cleaned = -0.0034332 Jy ! Component: 3100 - total flux cleaned = -0.00349592 Jy ! Component: 3150 - total flux cleaned = -0.00350834 Jy ! Component: 3200 - total flux cleaned = -0.00350832 Jy ! Component: 3250 - total flux cleaned = -0.00353281 Jy ! Component: 3300 - total flux cleaned = -0.00358144 Jy ! Component: 3350 - total flux cleaned = -0.00359357 Jy ! Component: 3400 - total flux cleaned = -0.00362955 Jy ! Component: 3450 - total flux cleaned = -0.00361759 Jy ! Component: 3500 - total flux cleaned = -0.00366493 Jy ! Component: 3550 - total flux cleaned = -0.00365322 Jy ! Component: 3600 - total flux cleaned = -0.00371182 Jy ! Component: 3650 - total flux cleaned = -0.00370014 Jy ! Component: 3700 - total flux cleaned = -0.00372321 Jy ! Component: 3750 - total flux cleaned = -0.00379217 Jy ! Component: 3800 - total flux cleaned = -0.00379223 Jy ! Component: 3850 - total flux cleaned = -0.00383747 Jy ! Component: 3900 - total flux cleaned = -0.00382614 Jy ! Component: 3950 - total flux cleaned = -0.0038485 Jy ! Component: 4000 - total flux cleaned = -0.00385962 Jy ! Component: 4050 - total flux cleaned = -0.00389284 Jy ! Total flux subtracted in 4096 components = -0.00391467 Jy ! Clean residual min=-0.000622 max=0.000586 Jy/beam ! Clean residual mean=0.000003 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.118144 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 456 components and 0.118144 Jy ![Exited script file: muppet] wmap "J0215-0343_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.811 x 7.775 at 7.142 degrees (North through East) ! Clean map min=-0.0012078 max=0.074597 Jy/beam ! Writing clean map to FITS file: J0215-0343_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0745971 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000214064 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.860882 0.860882 1.72176 3.44353 6.88705 13.7741 27.5482 55.0964 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.074 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.811 x 7.775 at 7.142 degrees (North through East) ! Clean map min=-0.0012078 max=0.074597 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0215-0343_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:02:16 2017