! Started logfile: J0215-0222_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:02:05 2017 obs J0215-0222_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0215-0222_S_2015_01_23_pus_uva.fits ! AN table 1: 73 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.77656 visibilities/baseline/integration-bin. ! Found source: J0215-0222 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 10204 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0215-0222_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.768478Jy sigma=0.007333 ! Fit after self-cal, rms=0.735782Jy sigma=0.007014 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.224 mas, bmaj=6.918 mas, bpa=7.508 degrees ! Estimated noise=1028.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.230599 Jy ! Component: 100 - total flux cleaned = 0.287887 Jy ! Total flux subtracted in 100 components = 0.287887 Jy ! Clean residual min=-0.018149 max=0.029026 Jy/beam ! Clean residual mean=-0.000006 rms=0.005240 Jy/beam ! Combined flux in latest and established models = 0.287887 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.287887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160181Jy sigma=0.001206 ! Fit after self-cal, rms=0.160184Jy sigma=0.001206 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.786 mas, bmaj=7.659 mas, bpa=6.277 degrees ! Estimated noise=752.933 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0287132 Jy ! Component: 100 - total flux cleaned = 0.0439433 Jy ! Component: 150 - total flux cleaned = 0.0529246 Jy ! Component: 200 - total flux cleaned = 0.0583319 Jy ! Total flux subtracted in 200 components = 0.0583319 Jy ! Clean residual min=-0.016393 max=0.026389 Jy/beam ! Clean residual mean=-0.000070 rms=0.005730 Jy/beam ! Combined flux in latest and established models = 0.346219 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 34 components and 0.346219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159828Jy sigma=0.001114 ! Fit after self-cal, rms=0.159673Jy sigma=0.001112 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 2.11 HN 0.96 KP 1.02 ! LA 1.20 MK 1.01 NL 0.96 OV 0.90 ! PT 0.94 SC 1.03 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 2.59 HN 1.01 KP 0.95 ! LA 1.16 MK 1.01 NL 1.16 OV 0.92 ! PT 0.92 SC 1.07 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 2.75 HN 1.00 KP 0.81 ! LA 0.94 MK 1.05 NL 1.37 OV 0.85 ! PT 0.88 SC 1.07 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 2.26 HN 0.94 KP 0.73 ! LA 0.96 MK 1.07 NL 0.97 OV 0.89 ! PT 0.94 SC 1.00 ! ! ! Fit before self-cal, rms=0.159673Jy sigma=0.001112 ! Fit after self-cal, rms=0.253966Jy sigma=0.000919 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.784 mas, bmaj=7.709 mas, bpa=6.18 degrees ! Estimated noise=751.125 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00487455 Jy ! Component: 100 - total flux cleaned = 0.00510863 Jy ! Component: 150 - total flux cleaned = 0.0051112 Jy ! Component: 200 - total flux cleaned = 0.0050239 Jy ! Total flux subtracted in 200 components = 0.0050239 Jy ! Clean residual min=-0.012898 max=0.014644 Jy/beam ! Clean residual mean=-0.000034 rms=0.003601 Jy/beam ! Combined flux in latest and established models = 0.351243 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 55 components and 0.351243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253821Jy sigma=0.000915 ! Fit after self-cal, rms=0.254414Jy sigma=0.000914 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254414Jy sigma=0.000914 ! Fit after self-cal, rms=0.251706Jy sigma=0.000808 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.788 mas, bmaj=7.692 mas, bpa=5.834 degrees ! Estimated noise=751.903 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00083308 Jy ! Component: 100 - total flux cleaned = 0.00074488 Jy ! Component: 150 - total flux cleaned = 0.000742805 Jy ! Component: 200 - total flux cleaned = 0.000808112 Jy ! Total flux subtracted in 200 components = 0.000808112 Jy ! Clean residual min=-0.004955 max=0.009076 Jy/beam ! Clean residual mean=-0.000001 rms=0.001515 Jy/beam ! Combined flux in latest and established models = 0.352051 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 59 components and 0.352051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251670Jy sigma=0.000806 ! Fit after self-cal, rms=0.251746Jy sigma=0.000805 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, -10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00831298 Jy ! Component: 100 - total flux cleaned = 0.0104569 Jy ! Component: 150 - total flux cleaned = 0.0100232 Jy ! Component: 200 - total flux cleaned = 0.00967749 Jy ! Total flux subtracted in 200 components = 0.00967749 Jy ! Clean residual min=-0.004017 max=0.006275 Jy/beam ! Clean residual mean=-0.000002 rms=0.001192 Jy/beam ! Combined flux in latest and established models = 0.361728 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 84 components and 0.361728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251530Jy sigma=0.000795 ! Fit after self-cal, rms=0.251505Jy sigma=0.000795 ! Inverting map ! Added new window around map position (-16, -33.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00613661 Jy ! Component: 100 - total flux cleaned = 0.009635 Jy ! Component: 150 - total flux cleaned = 0.0122563 Jy ! Component: 200 - total flux cleaned = 0.0136963 Jy ! Total flux subtracted in 200 components = 0.0136963 Jy ! Clean residual min=-0.003623 max=0.003855 Jy/beam ! Clean residual mean=0.000003 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.375424 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 113 components and 0.375424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251294Jy sigma=0.000789 ! Fit after self-cal, rms=0.251313Jy sigma=0.000789 ! Inverting map ! Added new window around map position (-16.5, -50.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0033978 Jy ! Component: 100 - total flux cleaned = 0.00467168 Jy ! Component: 150 - total flux cleaned = 0.00533856 Jy ! Component: 200 - total flux cleaned = 0.00587854 Jy ! Total flux subtracted in 200 components = 0.00587854 Jy ! Clean residual min=-0.003183 max=0.003163 Jy/beam ! Clean residual mean=0.000002 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.381303 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 143 components and 0.381303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251213Jy sigma=0.000787 ! Fit after self-cal, rms=0.251188Jy sigma=0.000787 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251188Jy sigma=0.000787 ! Fit after self-cal, rms=0.254937Jy sigma=0.000786 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.793 mas, bmaj=7.695 mas, bpa=5.78 degrees ! Estimated noise=750.356 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00242379 Jy ! Component: 100 - total flux cleaned = 0.00376862 Jy ! Component: 150 - total flux cleaned = 0.00466807 Jy ! Component: 200 - total flux cleaned = 0.00487938 Jy ! Total flux subtracted in 200 components = 0.00487938 Jy ! Clean residual min=-0.002622 max=0.002526 Jy/beam ! Clean residual mean=0.000000 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.386182 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 172 components and 0.386182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254882Jy sigma=0.000784 ! Fit after self-cal, rms=0.254871Jy sigma=0.000784 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000541034 Jy ! Component: 100 - total flux cleaned = 0.000689311 Jy ! Component: 150 - total flux cleaned = 0.00086698 Jy ! Component: 200 - total flux cleaned = 0.00103186 Jy ! Total flux subtracted in 200 components = 0.00103186 Jy ! Clean residual min=-0.002470 max=0.002479 Jy/beam ! Clean residual mean=0.000001 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.387214 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 191 components and 0.387214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254839Jy sigma=0.000784 ! Fit after self-cal, rms=0.254834Jy sigma=0.000784 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254834Jy sigma=0.000784 ! Fit after self-cal, rms=0.255368Jy sigma=0.000784 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.051 mas, bmaj=11.58 mas, bpa=-4.003 degrees ! Estimated noise=928.069 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152708 Jy ! Component: 100 - total flux cleaned = 0.00226038 Jy ! Component: 150 - total flux cleaned = 0.00243773 Jy ! Component: 200 - total flux cleaned = 0.00249962 Jy ! Total flux subtracted in 200 components = 0.00249962 Jy ! Clean residual min=-0.002448 max=0.002702 Jy/beam ! Clean residual mean=0.000001 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.389714 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 222 components and 0.389714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255341Jy sigma=0.000784 ! Fit after self-cal, rms=0.255336Jy sigma=0.000783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000507628 Jy ! Component: 100 - total flux cleaned = 0.000536563 Jy ! Component: 150 - total flux cleaned = 0.000486964 Jy ! Component: 200 - total flux cleaned = 0.000440323 Jy ! Total flux subtracted in 200 components = 0.000440323 Jy ! Clean residual min=-0.002431 max=0.002679 Jy/beam ! Clean residual mean=0.000001 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.390154 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 246 components and 0.390154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255323Jy sigma=0.000783 ! Fit after self-cal, rms=0.255318Jy sigma=0.000783 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.796 mas, bmaj=7.698 mas, bpa=5.755 degrees ! Estimated noise=750.44 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.796 x 7.698 at 5.755 degrees (North through East) ! Clean map min=-0.0024779 max=0.29629 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.238 mas, bmaj=6.964 mas, bpa=6.996 degrees ! Estimated noise=1021.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.228061 Jy ! Component: 100 - total flux cleaned = 0.28821 Jy ! Component: 150 - total flux cleaned = 0.315632 Jy ! Component: 200 - total flux cleaned = 0.330565 Jy ! Total flux subtracted in 200 components = 0.330565 Jy ! Clean residual min=-0.006105 max=0.007977 Jy/beam ! Clean residual mean=0.000005 rms=0.001673 Jy/beam ! Combined flux in latest and established models = 0.330565 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.330565 Jy ! Inverting map and beam ! Estimated beam: bmin=3.796 mas, bmaj=7.698 mas, bpa=5.755 degrees ! Estimated noise=750.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126702 Jy ! Component: 100 - total flux cleaned = 0.0214841 Jy ! Component: 150 - total flux cleaned = 0.028515 Jy ! Component: 200 - total flux cleaned = 0.0342396 Jy ! Total flux subtracted in 200 components = 0.0342396 Jy ! Clean residual min=-0.003971 max=0.003897 Jy/beam ! Clean residual mean=0.000001 rms=0.001015 Jy/beam ! Combined flux in latest and established models = 0.364805 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 51 components and 0.364805 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.051 mas, bmaj=11.58 mas, bpa=-4.003 degrees ! Estimated noise=928.069 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0066436 Jy ! Component: 100 - total flux cleaned = 0.0113274 Jy ! Component: 150 - total flux cleaned = 0.0149153 Jy ! Component: 200 - total flux cleaned = 0.0174327 Jy ! Total flux subtracted in 200 components = 0.0174327 Jy ! Clean residual min=-0.003401 max=0.003110 Jy/beam ! Clean residual mean=0.000001 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.382237 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160225 Jy ! Component: 100 - total flux cleaned = 0.00295538 Jy ! Component: 150 - total flux cleaned = 0.00404512 Jy ! Component: 200 - total flux cleaned = 0.00475977 Jy ! Total flux subtracted in 200 components = 0.00475977 Jy ! Clean residual min=-0.002878 max=0.003101 Jy/beam ! Clean residual mean=0.000001 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.386997 Jy ! Adding 111 model components to the UV plane model. ! The established model now contains 151 components and 0.386997 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.796 mas, bmaj=7.698 mas, bpa=5.755 degrees ! Estimated noise=750.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134714 Jy ! Component: 100 - total flux cleaned = 0.00212687 Jy ! Component: 150 - total flux cleaned = 0.00299143 Jy ! Component: 200 - total flux cleaned = 0.00340061 Jy ! Total flux subtracted in 200 components = 0.00340061 Jy ! Clean residual min=-0.002463 max=0.002547 Jy/beam ! Clean residual mean=-0.000001 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.390398 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 171 components and 0.390398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255350Jy sigma=0.000784 ! Fit after self-cal, rms=0.255337Jy sigma=0.000784 wmodel J0215-0222_S_2015_01_23_pus_map.mod ! Writing 171 model components to file: J0215-0222_S_2015_01_23_pus_map.mod wobs J0215-0222_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0215-0222_S_2015_01_23_pus_uvs.fits wwins J0215-0222_S_2015_01_23_pus_map.win ! wwins: Wrote 4 windows to J0215-0222_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000620182 Jy ! Component: 100 - total flux cleaned = 0.000837265 Jy ! Component: 150 - total flux cleaned = 0.000796641 Jy ! Component: 200 - total flux cleaned = 0.000719464 Jy ! Component: 250 - total flux cleaned = 0.000719292 Jy ! Component: 300 - total flux cleaned = 0.000683387 Jy ! Component: 350 - total flux cleaned = 0.000647595 Jy ! Component: 400 - total flux cleaned = 0.00057882 Jy ! Component: 450 - total flux cleaned = 0.000478959 Jy ! Component: 500 - total flux cleaned = 0.000349348 Jy ! Component: 550 - total flux cleaned = 0.000191819 Jy ! Component: 600 - total flux cleaned = 9.94551e-05 Jy ! Component: 650 - total flux cleaned = 0.000129112 Jy ! Component: 700 - total flux cleaned = 0.000128897 Jy ! Component: 750 - total flux cleaned = 0.000215197 Jy ! Component: 800 - total flux cleaned = 0.000157668 Jy ! Component: 850 - total flux cleaned = 0.000213192 Jy ! Component: 900 - total flux cleaned = 0.00029635 Jy ! Component: 950 - total flux cleaned = 0.000433086 Jy ! Component: 1000 - total flux cleaned = 0.000540905 Jy ! Component: 1050 - total flux cleaned = 0.000647096 Jy ! Component: 1100 - total flux cleaned = 0.000752388 Jy ! Component: 1150 - total flux cleaned = 0.000908737 Jy ! Component: 1200 - total flux cleaned = 0.00116568 Jy ! Component: 1250 - total flux cleaned = 0.00121652 Jy ! Component: 1300 - total flux cleaned = 0.00139149 Jy ! Component: 1350 - total flux cleaned = 0.00141614 Jy ! Component: 1400 - total flux cleaned = 0.00146498 Jy ! Component: 1450 - total flux cleaned = 0.00148947 Jy ! Component: 1500 - total flux cleaned = 0.00153741 Jy ! Component: 1550 - total flux cleaned = 0.00158472 Jy ! Component: 1600 - total flux cleaned = 0.00163186 Jy ! Component: 1650 - total flux cleaned = 0.00167868 Jy ! Component: 1700 - total flux cleaned = 0.00174784 Jy ! Component: 1750 - total flux cleaned = 0.0017931 Jy ! Component: 1800 - total flux cleaned = 0.00179326 Jy ! Component: 1850 - total flux cleaned = 0.00183808 Jy ! Component: 1900 - total flux cleaned = 0.00192656 Jy ! Component: 1950 - total flux cleaned = 0.00201439 Jy ! Component: 2000 - total flux cleaned = 0.00199273 Jy ! Component: 2050 - total flux cleaned = 0.00212174 Jy ! Component: 2100 - total flux cleaned = 0.00214332 Jy ! Component: 2150 - total flux cleaned = 0.00227031 Jy ! Component: 2200 - total flux cleaned = 0.00224953 Jy ! Component: 2250 - total flux cleaned = 0.00227064 Jy ! Component: 2300 - total flux cleaned = 0.00227097 Jy ! Component: 2350 - total flux cleaned = 0.00235266 Jy ! Component: 2400 - total flux cleaned = 0.00237277 Jy ! Component: 2450 - total flux cleaned = 0.00231217 Jy ! Component: 2500 - total flux cleaned = 0.00227229 Jy ! Component: 2550 - total flux cleaned = 0.00221267 Jy ! Component: 2600 - total flux cleaned = 0.00225193 Jy ! Component: 2650 - total flux cleaned = 0.00229105 Jy ! Component: 2700 - total flux cleaned = 0.00229073 Jy ! Component: 2750 - total flux cleaned = 0.00229077 Jy ! Component: 2800 - total flux cleaned = 0.0023097 Jy ! Component: 2850 - total flux cleaned = 0.00217701 Jy ! Component: 2900 - total flux cleaned = 0.00221476 Jy ! Component: 2950 - total flux cleaned = 0.00219621 Jy ! Component: 3000 - total flux cleaned = 0.00214058 Jy ! Component: 3050 - total flux cleaned = 0.00215927 Jy ! Component: 3100 - total flux cleaned = 0.00215912 Jy ! Component: 3150 - total flux cleaned = 0.00210443 Jy ! Component: 3200 - total flux cleaned = 0.00214071 Jy ! Component: 3250 - total flux cleaned = 0.00212277 Jy ! Component: 3300 - total flux cleaned = 0.00210491 Jy ! Component: 3350 - total flux cleaned = 0.0020693 Jy ! Component: 3400 - total flux cleaned = 0.00205161 Jy ! Component: 3450 - total flux cleaned = 0.00198135 Jy ! Component: 3500 - total flux cleaned = 0.0019119 Jy ! Component: 3550 - total flux cleaned = 0.00191187 Jy ! Component: 3600 - total flux cleaned = 0.00192923 Jy ! Component: 3650 - total flux cleaned = 0.001878 Jy ! Component: 3700 - total flux cleaned = 0.00186109 Jy ! Component: 3750 - total flux cleaned = 0.00181048 Jy ! Component: 3800 - total flux cleaned = 0.00177695 Jy ! Component: 3850 - total flux cleaned = 0.00177713 Jy ! Component: 3900 - total flux cleaned = 0.0017771 Jy ! Component: 3950 - total flux cleaned = 0.0017772 Jy ! Component: 4000 - total flux cleaned = 0.00179372 Jy ! Component: 4050 - total flux cleaned = 0.00179382 Jy ! Total flux subtracted in 4096 components = 0.00185879 Jy ! Clean residual min=-0.000856 max=0.000819 Jy/beam ! Clean residual mean=0.000000 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 0.392256 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 453 components and 0.392256 Jy ![Exited script file: muppet] wmap "J0215-0222_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.796 x 7.698 at 5.755 degrees (North through East) ! Clean map min=-0.0019861 max=0.29537 Jy/beam ! Writing clean map to FITS file: J0215-0222_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.295368 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000305126 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.309911 0.309911 0.619823 1.23965 2.47929 4.95858 9.91717 19.8343 39.6687 79.3373 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.295 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.796 x 7.698 at 5.755 degrees (North through East) ! Clean map min=-0.0019861 max=0.29537 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0215-0222_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:02:10 2017