! Started logfile: J0214+5144_S_2014_05_31_pus_uvs.log on Mon Nov 28 14:42:20 2016 obs J0214+5144_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J0214+5144_S_2014_05_31_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.88725 visibilities/baseline/integration-bin. ! Found source: J0214+5144 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 19484 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0214+5144_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.922263Jy sigma=0.011228 ! Fit after self-cal, rms=0.888808Jy sigma=0.010805 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.316 mas, bmaj=5.97 mas, bpa=33.37 degrees ! Estimated noise=697.664 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0849665 Jy ! Component: 100 - total flux cleaned = 0.107112 Jy ! Total flux subtracted in 100 components = 0.107112 Jy ! Clean residual min=-0.005084 max=0.009867 Jy/beam ! Clean residual mean=-0.000014 rms=0.001410 Jy/beam ! Combined flux in latest and established models = 0.107112 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.107112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074503Jy sigma=0.000851 ! Fit after self-cal, rms=0.074464Jy sigma=0.000850 ! Inverting map ! Added new window around map position (4.5, 2.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114982 Jy ! Component: 100 - total flux cleaned = 0.0185406 Jy ! Total flux subtracted in 100 components = 0.0185406 Jy ! Clean residual min=-0.003824 max=0.005907 Jy/beam ! Clean residual mean=-0.000007 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.125653 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 14 components and 0.125653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072179Jy sigma=0.000821 ! Fit after self-cal, rms=0.072105Jy sigma=0.000820 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.209 mas, bmaj=6.63 mas, bpa=32.47 degrees ! Estimated noise=422.833 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00890692 Jy ! Component: 100 - total flux cleaned = 0.0147125 Jy ! Component: 150 - total flux cleaned = 0.0188685 Jy ! Component: 200 - total flux cleaned = 0.0219645 Jy ! Total flux subtracted in 200 components = 0.0219645 Jy ! Clean residual min=-0.002481 max=0.003676 Jy/beam ! Clean residual mean=0.000007 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.147617 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 51 components and 0.147617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070778Jy sigma=0.000803 ! Fit after self-cal, rms=0.070706Jy sigma=0.000802 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.83 HN 1.01 KP 1.05 ! LA 1.17 MK 1.00 NL 0.97 OV 0.94 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.05 KP 1.03 ! LA 1.12 MK 1.05 NL 1.02 OV 0.96 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.12 HN 1.05 KP 0.91 ! LA 0.91 MK 1.03 NL 0.96 OV 0.89 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 1.00 KP 0.91 ! LA 0.85 MK 1.03 NL 1.06 OV 0.97 ! PT 1.00 SC 0.99 ! ! ! Fit before self-cal, rms=0.070706Jy sigma=0.000802 ! Fit after self-cal, rms=0.067956Jy sigma=0.000789 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.239 mas, bmaj=6.647 mas, bpa=32.51 degrees ! Estimated noise=416.502 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (22, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00327705 Jy ! Component: 100 - total flux cleaned = 0.00512958 Jy ! Component: 150 - total flux cleaned = 0.00624167 Jy ! Component: 200 - total flux cleaned = 0.00686326 Jy ! Total flux subtracted in 200 components = 0.00686326 Jy ! Clean residual min=-0.001561 max=0.002013 Jy/beam ! Clean residual mean=0.000010 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.154481 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 95 components and 0.154481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067784Jy sigma=0.000787 ! Fit after self-cal, rms=0.067769Jy sigma=0.000786 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067769Jy sigma=0.000786 ! Fit after self-cal, rms=0.067674Jy sigma=0.000785 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.233 mas, bmaj=6.646 mas, bpa=32.37 degrees ! Estimated noise=416.271 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117699 Jy ! Component: 100 - total flux cleaned = 0.00204988 Jy ! Component: 150 - total flux cleaned = 0.00239538 Jy ! Component: 200 - total flux cleaned = 0.00261765 Jy ! Total flux subtracted in 200 components = 0.00261765 Jy ! Clean residual min=-0.001400 max=0.001713 Jy/beam ! Clean residual mean=0.000012 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.157098 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 121 components and 0.157098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067644Jy sigma=0.000785 ! Fit after self-cal, rms=0.067642Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-24.5, 38). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148611 Jy ! Component: 100 - total flux cleaned = 0.00225194 Jy ! Component: 150 - total flux cleaned = 0.00261536 Jy ! Component: 200 - total flux cleaned = 0.00294064 Jy ! Total flux subtracted in 200 components = 0.00294064 Jy ! Clean residual min=-0.001295 max=0.001482 Jy/beam ! Clean residual mean=0.000014 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.160039 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 150 components and 0.160039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067604Jy sigma=0.000784 ! Fit after self-cal, rms=0.067603Jy sigma=0.000784 ! Inverting map ! Added new window around map position (-126.5, 64). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127985 Jy ! Component: 100 - total flux cleaned = 0.00182168 Jy ! Component: 150 - total flux cleaned = 0.00204954 Jy ! Component: 200 - total flux cleaned = 0.002258 Jy ! Total flux subtracted in 200 components = 0.002258 Jy ! Clean residual min=-0.001148 max=0.001416 Jy/beam ! Clean residual mean=0.000013 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.162297 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 171 components and 0.162297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067573Jy sigma=0.000784 ! Fit after self-cal, rms=0.067572Jy sigma=0.000784 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067572Jy sigma=0.000784 ! Fit after self-cal, rms=0.067575Jy sigma=0.000784 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.237 mas, bmaj=6.641 mas, bpa=32.35 degrees ! Estimated noise=416.261 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000626131 Jy ! Component: 100 - total flux cleaned = 0.000970652 Jy ! Component: 150 - total flux cleaned = 0.001167 Jy ! Component: 200 - total flux cleaned = 0.00129543 Jy ! Total flux subtracted in 200 components = 0.00129543 Jy ! Clean residual min=-0.001071 max=0.001357 Jy/beam ! Clean residual mean=0.000011 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.163593 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 184 components and 0.163593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067563Jy sigma=0.000784 ! Fit after self-cal, rms=0.067563Jy sigma=0.000784 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-46.5, -73). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013403 Jy ! Component: 100 - total flux cleaned = 0.00221491 Jy ! Component: 150 - total flux cleaned = 0.00289118 Jy ! Component: 200 - total flux cleaned = 0.00330538 Jy ! Total flux subtracted in 200 components = 0.00330538 Jy ! Clean residual min=-0.001027 max=0.001113 Jy/beam ! Clean residual mean=0.000008 rms=0.000278 Jy/beam ! Combined flux in latest and established models = 0.166898 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 211 components and 0.166898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067530Jy sigma=0.000783 ! Fit after self-cal, rms=0.067528Jy sigma=0.000783 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067528Jy sigma=0.000783 ! Fit after self-cal, rms=0.067436Jy sigma=0.000783 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.084 mas, bmaj=8.928 mas, bpa=21.7 degrees ! Estimated noise=481.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000879907 Jy ! Component: 100 - total flux cleaned = 0.00152028 Jy ! Component: 150 - total flux cleaned = 0.00201064 Jy ! Component: 200 - total flux cleaned = 0.00234408 Jy ! Total flux subtracted in 200 components = 0.00234408 Jy ! Clean residual min=-0.001075 max=0.001189 Jy/beam ! Clean residual mean=0.000013 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.169242 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 245 components and 0.169242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067428Jy sigma=0.000783 ! Fit after self-cal, rms=0.067427Jy sigma=0.000783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000388301 Jy ! Component: 100 - total flux cleaned = 0.000713438 Jy ! Component: 150 - total flux cleaned = 0.000919314 Jy ! Component: 200 - total flux cleaned = 0.00109601 Jy ! Total flux subtracted in 200 components = 0.00109601 Jy ! Clean residual min=-0.001053 max=0.001165 Jy/beam ! Clean residual mean=0.000012 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.170338 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 264 components and 0.170338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067423Jy sigma=0.000783 ! Fit after self-cal, rms=0.067423Jy sigma=0.000783 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.24 mas, bmaj=6.638 mas, bpa=32.35 degrees ! Estimated noise=415.758 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.24 x 6.638 at 32.35 degrees (North through East) ! Clean map min=-0.00091789 max=0.11186 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.335 mas, bmaj=5.976 mas, bpa=33.39 degrees ! Estimated noise=685.782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0833249 Jy ! Component: 100 - total flux cleaned = 0.105387 Jy ! Component: 150 - total flux cleaned = 0.116713 Jy ! Component: 200 - total flux cleaned = 0.12431 Jy ! Total flux subtracted in 200 components = 0.12431 Jy ! Clean residual min=-0.003235 max=0.004335 Jy/beam ! Clean residual mean=-0.000006 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.12431 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.12431 Jy ! Inverting map and beam ! Estimated beam: bmin=4.24 mas, bmaj=6.638 mas, bpa=32.35 degrees ! Estimated noise=415.758 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00844529 Jy ! Component: 100 - total flux cleaned = 0.014344 Jy ! Component: 150 - total flux cleaned = 0.0186485 Jy ! Component: 200 - total flux cleaned = 0.0218884 Jy ! Total flux subtracted in 200 components = 0.0218884 Jy ! Clean residual min=-0.002019 max=0.001914 Jy/beam ! Clean residual mean=0.000004 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.146198 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 58 components and 0.146198 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.084 mas, bmaj=8.928 mas, bpa=21.7 degrees ! Estimated noise=481.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00391477 Jy ! Component: 100 - total flux cleaned = 0.00671627 Jy ! Component: 150 - total flux cleaned = 0.00895638 Jy ! Component: 200 - total flux cleaned = 0.0108319 Jy ! Total flux subtracted in 200 components = 0.0108319 Jy ! Clean residual min=-0.001749 max=0.001721 Jy/beam ! Clean residual mean=0.000013 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.15703 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016197 Jy ! Component: 100 - total flux cleaned = 0.00304026 Jy ! Component: 150 - total flux cleaned = 0.00430822 Jy ! Component: 200 - total flux cleaned = 0.00544657 Jy ! Total flux subtracted in 200 components = 0.00544657 Jy ! Clean residual min=-0.001443 max=0.001485 Jy/beam ! Clean residual mean=0.000013 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.162477 Jy ! Adding 145 model components to the UV plane model. ! The established model now contains 192 components and 0.162477 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.24 mas, bmaj=6.638 mas, bpa=32.35 degrees ! Estimated noise=415.758 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000974305 Jy ! Component: 100 - total flux cleaned = 0.00172076 Jy ! Component: 150 - total flux cleaned = 0.00240215 Jy ! Component: 200 - total flux cleaned = 0.00299984 Jy ! Total flux subtracted in 200 components = 0.00299984 Jy ! Clean residual min=-0.001163 max=0.001189 Jy/beam ! Clean residual mean=0.000007 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.165477 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 221 components and 0.165477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067465Jy sigma=0.000783 ! Fit after self-cal, rms=0.067462Jy sigma=0.000783 wmodel J0214+5144_S_2014_05_31_pus_map.mod ! Writing 221 model components to file: J0214+5144_S_2014_05_31_pus_map.mod wobs J0214+5144_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J0214+5144_S_2014_05_31_pus_uvs.fits wwins J0214+5144_S_2014_05_31_pus_map.win ! wwins: Wrote 7 windows to J0214+5144_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165477 Jy ! Component: 100 - total flux cleaned = 0.000320566 Jy ! Component: 150 - total flux cleaned = 0.000430557 Jy ! Component: 200 - total flux cleaned = 0.000589156 Jy ! Component: 250 - total flux cleaned = 0.000742856 Jy ! Component: 300 - total flux cleaned = 0.000825823 Jy ! Component: 350 - total flux cleaned = 0.000890509 Jy ! Component: 400 - total flux cleaned = 0.00101634 Jy ! Component: 450 - total flux cleaned = 0.00112351 Jy ! Component: 500 - total flux cleaned = 0.00122882 Jy ! Component: 550 - total flux cleaned = 0.00131722 Jy ! Component: 600 - total flux cleaned = 0.00141856 Jy ! Component: 650 - total flux cleaned = 0.00157464 Jy ! Component: 700 - total flux cleaned = 0.00167223 Jy ! Component: 750 - total flux cleaned = 0.00174079 Jy ! Component: 800 - total flux cleaned = 0.00186218 Jy ! Component: 850 - total flux cleaned = 0.00196817 Jy ! Component: 900 - total flux cleaned = 0.00204643 Jy ! Component: 950 - total flux cleaned = 0.00213632 Jy ! Component: 1000 - total flux cleaned = 0.00219974 Jy ! Component: 1050 - total flux cleaned = 0.00227471 Jy ! Component: 1100 - total flux cleaned = 0.00234848 Jy ! Component: 1150 - total flux cleaned = 0.00238492 Jy ! Component: 1200 - total flux cleaned = 0.00246879 Jy ! Component: 1250 - total flux cleaned = 0.00246873 Jy ! Component: 1300 - total flux cleaned = 0.00253899 Jy ! Component: 1350 - total flux cleaned = 0.00256195 Jy ! Component: 1400 - total flux cleaned = 0.00252776 Jy ! Component: 1450 - total flux cleaned = 0.00255051 Jy ! Component: 1500 - total flux cleaned = 0.00257293 Jy ! Component: 1550 - total flux cleaned = 0.00256182 Jy ! Component: 1600 - total flux cleaned = 0.00255097 Jy ! Component: 1650 - total flux cleaned = 0.00254036 Jy ! Component: 1700 - total flux cleaned = 0.00254064 Jy ! Component: 1750 - total flux cleaned = 0.00259345 Jy ! Component: 1800 - total flux cleaned = 0.00257255 Jy ! Component: 1850 - total flux cleaned = 0.00258284 Jy ! Component: 1900 - total flux cleaned = 0.00258291 Jy ! Component: 1950 - total flux cleaned = 0.00251236 Jy ! Component: 2000 - total flux cleaned = 0.00255252 Jy ! Component: 2050 - total flux cleaned = 0.00252283 Jy ! Component: 2100 - total flux cleaned = 0.00252275 Jy ! Component: 2150 - total flux cleaned = 0.00246475 Jy ! Component: 2200 - total flux cleaned = 0.00245513 Jy ! Component: 2250 - total flux cleaned = 0.00242661 Jy ! Component: 2300 - total flux cleaned = 0.00241716 Jy ! Component: 2350 - total flux cleaned = 0.0023611 Jy ! Component: 2400 - total flux cleaned = 0.00233337 Jy ! Component: 2450 - total flux cleaned = 0.00235166 Jy ! Component: 2500 - total flux cleaned = 0.00231519 Jy ! Component: 2550 - total flux cleaned = 0.00227002 Jy ! Component: 2600 - total flux cleaned = 0.00223415 Jy ! Component: 2650 - total flux cleaned = 0.0021899 Jy ! Component: 2700 - total flux cleaned = 0.00216352 Jy ! Component: 2750 - total flux cleaned = 0.00213752 Jy ! Component: 2800 - total flux cleaned = 0.0021202 Jy ! Component: 2850 - total flux cleaned = 0.00207734 Jy ! Component: 2900 - total flux cleaned = 0.00206876 Jy ! Component: 2950 - total flux cleaned = 0.00202653 Jy ! Component: 3000 - total flux cleaned = 0.0020182 Jy ! Component: 3050 - total flux cleaned = 0.00199319 Jy ! Component: 3100 - total flux cleaned = 0.00196847 Jy ! Component: 3150 - total flux cleaned = 0.00194393 Jy ! Component: 3200 - total flux cleaned = 0.00193581 Jy ! Component: 3250 - total flux cleaned = 0.00192774 Jy ! Component: 3300 - total flux cleaned = 0.0019358 Jy ! Component: 3350 - total flux cleaned = 0.00192782 Jy ! Component: 3400 - total flux cleaned = 0.00192004 Jy ! Component: 3450 - total flux cleaned = 0.00192002 Jy ! Component: 3500 - total flux cleaned = 0.00190445 Jy ! Component: 3550 - total flux cleaned = 0.00190445 Jy ! Component: 3600 - total flux cleaned = 0.00190446 Jy ! Component: 3650 - total flux cleaned = 0.00188165 Jy ! Component: 3700 - total flux cleaned = 0.00187405 Jy ! Component: 3750 - total flux cleaned = 0.00188897 Jy ! Component: 3800 - total flux cleaned = 0.00182936 Jy ! Component: 3850 - total flux cleaned = 0.00187381 Jy ! Component: 3900 - total flux cleaned = 0.00182951 Jy ! Component: 3950 - total flux cleaned = 0.00183689 Jy ! Component: 4000 - total flux cleaned = 0.00184425 Jy ! Component: 4050 - total flux cleaned = 0.00185876 Jy ! Total flux subtracted in 4096 components = 0.00186593 Jy ! Clean residual min=-0.000479 max=0.000420 Jy/beam ! Clean residual mean=0.000001 rms=0.000133 Jy/beam ! Combined flux in latest and established models = 0.167343 Jy keep ! Adding 302 model components to the UV plane model. ! The established model now contains 523 components and 0.167343 Jy ![Exited script file: muppet] wmap "J0214+5144_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.24 x 6.638 at 32.35 degrees (North through East) ! Clean map min=-0.00072394 max=0.11171 Jy/beam ! Writing clean map to FITS file: J0214+5144_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.111707 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000132209 device "J0214+5144_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J0214+5144_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.35506 0.35506 0.710121 1.42024 2.84048 5.68097 11.3619 22.7239 45.4477 90.8955 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.111 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.24 x 6.638 at 32.35 degrees (North through East) ! Clean map min=-0.00072394 max=0.11171 Jy/beam quit ! Quitting program ! Log file J0214+5144_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 14:42:26 2016