! Started logfile: J0213+1213_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:14:17 2017 obs J0213+1213_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0213+1213_S_2014_01_04_pus_uva.fits ! AN table 1: 108 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0213+1213 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0213+1213_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.945935Jy sigma=0.013365 ! Fit after self-cal, rms=0.929842Jy sigma=0.013171 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.051 mas, bmaj=5.435 mas, bpa=-5.529 degrees ! Estimated noise=810.642 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0561995 Jy ! Component: 100 - total flux cleaned = 0.0684547 Jy ! Total flux subtracted in 100 components = 0.0684547 Jy ! Clean residual min=-0.003972 max=0.004421 Jy/beam ! Clean residual mean=-0.000020 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.0684547 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.0684547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074216Jy sigma=0.000895 ! Fit after self-cal, rms=0.074174Jy sigma=0.000894 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.668 mas, bmaj=6.306 mas, bpa=-0.4904 degrees ! Estimated noise=555.225 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00345645 Jy ! Component: 100 - total flux cleaned = 0.00498624 Jy ! Component: 150 - total flux cleaned = 0.00581341 Jy ! Component: 200 - total flux cleaned = 0.00611509 Jy ! Total flux subtracted in 200 components = 0.00611509 Jy ! Clean residual min=-0.003056 max=0.003859 Jy/beam ! Clean residual mean=-0.000014 rms=0.000754 Jy/beam ! Combined flux in latest and established models = 0.0745698 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0745698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074000Jy sigma=0.000893 ! Fit after self-cal, rms=0.073996Jy sigma=0.000893 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* KP 1.00* LA 1.07 ! MK 0.94 NL 1.01 OV 0.99 PT 1.01 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* KP 1.00* LA 0.99 ! MK 0.98 NL 0.99 OV 1.05 PT 1.00 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00* KP 1.00* LA 0.80 ! MK 1.01 NL 1.04 OV 1.01 PT 0.99 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 0.88 ! MK 1.02 NL 1.07 OV 1.03 PT 1.03 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.073996Jy sigma=0.000893 ! Fit after self-cal, rms=0.071605Jy sigma=0.000887 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.644 mas, bmaj=6.302 mas, bpa=-0.2095 degrees ! Estimated noise=553.021 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322659 Jy ! Component: 100 - total flux cleaned = 0.00435521 Jy ! Component: 150 - total flux cleaned = 0.00484712 Jy ! Component: 200 - total flux cleaned = 0.00525637 Jy ! Total flux subtracted in 200 components = 0.00525637 Jy ! Clean residual min=-0.002285 max=0.001778 Jy/beam ! Clean residual mean=0.000004 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.0798262 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 34 components and 0.0798262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071453Jy sigma=0.000885 ! Fit after self-cal, rms=0.071280Jy sigma=0.000885 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071280Jy sigma=0.000885 ! Fit after self-cal, rms=0.070613Jy sigma=0.000883 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.654 mas, bmaj=6.317 mas, bpa=-0.6373 degrees ! Estimated noise=549.009 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109988 Jy ! Component: 100 - total flux cleaned = 0.00141958 Jy ! Component: 150 - total flux cleaned = 0.0016264 Jy ! Component: 200 - total flux cleaned = 0.00166899 Jy ! Total flux subtracted in 200 components = 0.00166899 Jy ! Clean residual min=-0.001862 max=0.001696 Jy/beam ! Clean residual mean=0.000003 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.0814952 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 60 components and 0.0814952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070584Jy sigma=0.000883 ! Fit after self-cal, rms=0.070670Jy sigma=0.000883 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000249206 Jy ! Component: 100 - total flux cleaned = 0.00031194 Jy ! Component: 150 - total flux cleaned = 0.000369554 Jy ! Component: 200 - total flux cleaned = 0.000404409 Jy ! Total flux subtracted in 200 components = 0.000404409 Jy ! Clean residual min=-0.001845 max=0.001634 Jy/beam ! Clean residual mean=0.000004 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.0818996 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 65 components and 0.0818996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070655Jy sigma=0.000883 ! Fit after self-cal, rms=0.070668Jy sigma=0.000883 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070668Jy sigma=0.000883 ! Fit after self-cal, rms=0.070767Jy sigma=0.000883 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.659 mas, bmaj=6.317 mas, bpa=-0.5551 degrees ! Estimated noise=548.543 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000330772 Jy ! Component: 100 - total flux cleaned = 0.00042996 Jy ! Component: 150 - total flux cleaned = 0.000511195 Jy ! Component: 200 - total flux cleaned = 0.000540956 Jy ! Total flux subtracted in 200 components = 0.000540956 Jy ! Clean residual min=-0.001778 max=0.001627 Jy/beam ! Clean residual mean=0.000003 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.0824405 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 72 components and 0.0824405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070755Jy sigma=0.000882 ! Fit after self-cal, rms=0.070808Jy sigma=0.000882 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.15611e-05 Jy ! Component: 100 - total flux cleaned = 9.62838e-05 Jy ! Component: 150 - total flux cleaned = 0.000124357 Jy ! Component: 200 - total flux cleaned = 0.00012444 Jy ! Total flux subtracted in 200 components = 0.00012444 Jy ! Clean residual min=-0.001776 max=0.001611 Jy/beam ! Clean residual mean=0.000003 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.082565 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 73 components and 0.082565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070800Jy sigma=0.000882 ! Fit after self-cal, rms=0.070809Jy sigma=0.000882 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070809Jy sigma=0.000882 ! Fit after self-cal, rms=0.070877Jy sigma=0.000882 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.404 mas, bmaj=10.46 mas, bpa=9.067 degrees ! Estimated noise=646.563 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000514633 Jy ! Component: 100 - total flux cleaned = 0.000673696 Jy ! Component: 150 - total flux cleaned = 0.000817105 Jy ! Component: 200 - total flux cleaned = 0.00092517 Jy ! Total flux subtracted in 200 components = 0.00092517 Jy ! Clean residual min=-0.001593 max=0.001697 Jy/beam ! Clean residual mean=0.000009 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.0834902 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 97 components and 0.0834902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070875Jy sigma=0.000882 ! Fit after self-cal, rms=0.070896Jy sigma=0.000882 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000137745 Jy ! Component: 100 - total flux cleaned = 0.000171203 Jy ! Component: 150 - total flux cleaned = 0.000192845 Jy ! Component: 200 - total flux cleaned = 0.000206555 Jy ! Total flux subtracted in 200 components = 0.000206555 Jy ! Clean residual min=-0.001595 max=0.001695 Jy/beam ! Clean residual mean=0.000010 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.0836967 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 107 components and 0.0836967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070894Jy sigma=0.000882 ! Fit after self-cal, rms=0.070894Jy sigma=0.000882 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.661 mas, bmaj=6.317 mas, bpa=-0.4594 degrees ! Estimated noise=548.623 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.661 x 6.317 at -0.4594 degrees (North through East) ! Clean map min=-0.001779 max=0.071134 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.046 mas, bmaj=5.49 mas, bpa=-5.803 degrees ! Estimated noise=802.249 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0555815 Jy ! Component: 100 - total flux cleaned = 0.0679448 Jy ! Component: 150 - total flux cleaned = 0.072915 Jy ! Component: 200 - total flux cleaned = 0.0761425 Jy ! Total flux subtracted in 200 components = 0.0761425 Jy ! Clean residual min=-0.002893 max=0.003396 Jy/beam ! Clean residual mean=-0.000007 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.0761425 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0761425 Jy ! Inverting map and beam ! Estimated beam: bmin=3.661 mas, bmaj=6.317 mas, bpa=-0.4594 degrees ! Estimated noise=548.623 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261295 Jy ! Component: 100 - total flux cleaned = 0.00379074 Jy ! Component: 150 - total flux cleaned = 0.0045573 Jy ! Component: 200 - total flux cleaned = 0.00510282 Jy ! Total flux subtracted in 200 components = 0.00510282 Jy ! Clean residual min=-0.001881 max=0.001695 Jy/beam ! Clean residual mean=-0.000000 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.0812454 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 44 components and 0.0812454 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.404 mas, bmaj=10.46 mas, bpa=9.067 degrees ! Estimated noise=646.563 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101136 Jy ! Component: 100 - total flux cleaned = 0.00151426 Jy ! Component: 150 - total flux cleaned = 0.00176467 Jy ! Component: 200 - total flux cleaned = 0.00196125 Jy ! Total flux subtracted in 200 components = 0.00196125 Jy ! Clean residual min=-0.001645 max=0.001699 Jy/beam ! Clean residual mean=0.000008 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0832066 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000155599 Jy ! Component: 100 - total flux cleaned = 0.000304783 Jy ! Component: 150 - total flux cleaned = 0.000423307 Jy ! Component: 200 - total flux cleaned = 0.000527519 Jy ! Total flux subtracted in 200 components = 0.000527519 Jy ! Clean residual min=-0.001609 max=0.001691 Jy/beam ! Clean residual mean=0.000010 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.0837341 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 88 components and 0.0837341 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.661 mas, bmaj=6.317 mas, bpa=-0.4594 degrees ! Estimated noise=548.623 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000417165 Jy ! Component: 100 - total flux cleaned = -0.000436733 Jy ! Component: 150 - total flux cleaned = -0.000474813 Jy ! Component: 200 - total flux cleaned = -0.000493004 Jy ! Total flux subtracted in 200 components = -0.000493004 Jy ! Clean residual min=-0.001754 max=0.001579 Jy/beam ! Clean residual mean=0.000004 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.0832411 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 102 components and 0.0832411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070901Jy sigma=0.000882 ! Fit after self-cal, rms=0.070895Jy sigma=0.000882 wmodel J0213+1213_S_2014_01_04_pus_map.mod ! Writing 102 model components to file: J0213+1213_S_2014_01_04_pus_map.mod wobs J0213+1213_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0213+1213_S_2014_01_04_pus_uvs.fits wwins J0213+1213_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J0213+1213_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000482901 Jy ! Component: 100 - total flux cleaned = -0.00083154 Jy ! Component: 150 - total flux cleaned = -0.00113192 Jy ! Component: 200 - total flux cleaned = -0.00118451 Jy ! Component: 250 - total flux cleaned = -0.00125941 Jy ! Component: 300 - total flux cleaned = -0.00130726 Jy ! Component: 350 - total flux cleaned = -0.00135247 Jy ! Component: 400 - total flux cleaned = -0.00137432 Jy ! Component: 450 - total flux cleaned = -0.00133136 Jy ! Component: 500 - total flux cleaned = -0.00129 Jy ! Component: 550 - total flux cleaned = -0.00130993 Jy ! Component: 600 - total flux cleaned = -0.00132883 Jy ! Component: 650 - total flux cleaned = -0.00130957 Jy ! Component: 700 - total flux cleaned = -0.00140232 Jy ! Component: 750 - total flux cleaned = -0.00140194 Jy ! Component: 800 - total flux cleaned = -0.00140218 Jy ! Component: 850 - total flux cleaned = -0.00145402 Jy ! Component: 900 - total flux cleaned = -0.00147061 Jy ! Component: 950 - total flux cleaned = -0.00148674 Jy ! Component: 1000 - total flux cleaned = -0.00147035 Jy ! Component: 1050 - total flux cleaned = -0.00143847 Jy ! Component: 1100 - total flux cleaned = -0.00136208 Jy ! Component: 1150 - total flux cleaned = -0.00134715 Jy ! Component: 1200 - total flux cleaned = -0.001303 Jy ! Component: 1250 - total flux cleaned = -0.00130307 Jy ! Component: 1300 - total flux cleaned = -0.00126078 Jy ! Component: 1350 - total flux cleaned = -0.00120541 Jy ! Component: 1400 - total flux cleaned = -0.00117802 Jy ! Component: 1450 - total flux cleaned = -0.0010715 Jy ! Component: 1500 - total flux cleaned = -0.00103228 Jy ! Component: 1550 - total flux cleaned = -0.00099331 Jy ! Component: 1600 - total flux cleaned = -0.000878774 Jy ! Component: 1650 - total flux cleaned = -0.000866319 Jy ! Component: 1700 - total flux cleaned = -0.000791966 Jy ! Component: 1750 - total flux cleaned = -0.000767521 Jy ! Component: 1800 - total flux cleaned = -0.000731501 Jy ! Component: 1850 - total flux cleaned = -0.000731412 Jy ! Component: 1900 - total flux cleaned = -0.00071968 Jy ! Component: 1950 - total flux cleaned = -0.000684758 Jy ! Component: 2000 - total flux cleaned = -0.000650471 Jy ! Component: 2050 - total flux cleaned = -0.000684563 Jy ! Component: 2100 - total flux cleaned = -0.000673284 Jy ! Component: 2150 - total flux cleaned = -0.000662206 Jy ! Component: 2200 - total flux cleaned = -0.00064034 Jy ! Component: 2250 - total flux cleaned = -0.000640421 Jy ! Component: 2300 - total flux cleaned = -0.000629783 Jy ! Component: 2350 - total flux cleaned = -0.000640275 Jy ! Component: 2400 - total flux cleaned = -0.000587932 Jy ! Component: 2450 - total flux cleaned = -0.000608774 Jy ! Component: 2500 - total flux cleaned = -0.000618968 Jy ! Component: 2550 - total flux cleaned = -0.000639285 Jy ! Component: 2600 - total flux cleaned = -0.000679448 Jy ! Component: 2650 - total flux cleaned = -0.000689357 Jy ! Component: 2700 - total flux cleaned = -0.000719023 Jy ! Component: 2750 - total flux cleaned = -0.000728891 Jy ! Component: 2800 - total flux cleaned = -0.000767561 Jy ! Component: 2850 - total flux cleaned = -0.000786708 Jy ! Component: 2900 - total flux cleaned = -0.000824742 Jy ! Component: 2950 - total flux cleaned = -0.000871845 Jy ! Component: 3000 - total flux cleaned = -0.000918488 Jy ! Component: 3050 - total flux cleaned = -0.000964758 Jy ! Component: 3100 - total flux cleaned = -0.000992213 Jy ! Component: 3150 - total flux cleaned = -0.00103762 Jy ! Component: 3200 - total flux cleaned = -0.00106463 Jy ! Component: 3250 - total flux cleaned = -0.00112707 Jy ! Component: 3300 - total flux cleaned = -0.00111821 Jy ! Component: 3350 - total flux cleaned = -0.00115327 Jy ! Component: 3400 - total flux cleaned = -0.00117948 Jy ! Component: 3450 - total flux cleaned = -0.00121405 Jy ! Component: 3500 - total flux cleaned = -0.00124829 Jy ! Component: 3550 - total flux cleaned = -0.00131634 Jy ! Component: 3600 - total flux cleaned = -0.00135006 Jy ! Component: 3650 - total flux cleaned = -0.00138351 Jy ! Component: 3700 - total flux cleaned = -0.00140845 Jy ! Component: 3750 - total flux cleaned = -0.00142501 Jy ! Component: 3800 - total flux cleaned = -0.00148241 Jy ! Component: 3850 - total flux cleaned = -0.00151494 Jy ! Component: 3900 - total flux cleaned = -0.00153917 Jy ! Component: 3950 - total flux cleaned = -0.00156338 Jy ! Component: 4000 - total flux cleaned = -0.00159532 Jy ! Component: 4050 - total flux cleaned = -0.00163492 Jy ! Total flux subtracted in 4096 components = -0.0016507 Jy ! Clean residual min=-0.000403 max=0.000477 Jy/beam ! Clean residual mean=-0.000001 rms=0.000135 Jy/beam ! Combined flux in latest and established models = 0.0815904 Jy keep ! Adding 237 model components to the UV plane model. ! The established model now contains 339 components and 0.0815904 Jy ![Exited script file: muppet] wmap "J0213+1213_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.661 x 6.317 at -0.4594 degrees (North through East) ! Clean map min=-0.0015408 max=0.070539 Jy/beam ! Writing clean map to FITS file: J0213+1213_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.070539 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000135956 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.578218 0.578218 1.15644 2.31287 4.62575 9.25149 18.503 37.006 74.0119 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.07 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.661 x 6.317 at -0.4594 degrees (North through East) ! Clean map min=-0.0015408 max=0.070539 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0213+1213_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:14:21 2017