! Started logfile: J0211+1051_X_2014_01_04_pus_uvs.log on Fri Jan 13 17:21:09 2017 obs J0211+1051_X_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0211+1051_X_2014_01_04_pus_uva.fits ! AN table 1: 59 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.416667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0211+1051 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 382 lines of history. ! ! Reading 10620 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0211+1051_X_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.447996Jy sigma=0.005380 ! Fit after self-cal, rms=0.362593Jy sigma=0.004490 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7218 mas, bmaj=1.642 mas, bpa=0.6189 degrees ! Estimated noise=962.523 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.702947 Jy ! Component: 100 - total flux cleaned = 0.944377 Jy ! Total flux subtracted in 100 components = 0.944377 Jy ! Clean residual min=-0.064577 max=0.113331 Jy/beam ! Clean residual mean=-0.000831 rms=0.022944 Jy/beam ! Combined flux in latest and established models = 0.944376 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.944376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.303179Jy sigma=0.004181 ! Fit after self-cal, rms=0.302404Jy sigma=0.004170 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8759 mas, bmaj=1.893 mas, bpa=0.8092 degrees ! Estimated noise=564.792 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.183658 Jy ! Component: 100 - total flux cleaned = 0.274749 Jy ! Component: 150 - total flux cleaned = 0.327475 Jy ! Component: 200 - total flux cleaned = 0.360509 Jy ! Total flux subtracted in 200 components = 0.360509 Jy ! Clean residual min=-0.039476 max=0.053526 Jy/beam ! Clean residual mean=-0.000878 rms=0.011786 Jy/beam ! Combined flux in latest and established models = 1.30489 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 30 components and 1.30489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.193615Jy sigma=0.002534 ! Fit after self-cal, rms=0.193087Jy sigma=0.002530 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.97 ! MK 1.02 NL 1.02 OV 1.00 PT 0.95 ! SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.97 ! MK 1.02 NL 1.02 OV 0.99 PT 0.91 ! SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.99 ! MK 1.05 NL 1.02 OV 1.00 PT 0.88 ! SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00 ! MK 1.04 NL 1.02 OV 0.99 PT 0.90 ! SC 1.07 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.99 ! MK 1.05 NL 1.03 OV 1.01 PT 0.89 ! SC 1.05 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.98 ! MK 1.05 NL 1.04 OV 1.02 PT 0.88 ! SC 1.06 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00 ! MK 1.05 NL 1.04 OV 1.04 PT 0.90 ! SC 1.07 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.98 ! MK 1.04 NL 1.05 OV 1.05 PT 0.90 ! SC 1.08 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.99 ! MK 1.03 NL 1.05 OV 1.04 PT 0.90 ! SC 1.05 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00 ! MK 1.05 NL 1.05 OV 1.04 PT 0.90 ! SC 1.03 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.01 ! MK 1.07 NL 1.06 OV 1.02 PT 0.91 ! SC 1.06 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00 ! MK 1.07 NL 1.05 OV 1.03 PT 0.92 ! SC 1.04 ! ! ! Fit before self-cal, rms=0.193087Jy sigma=0.002530 ! Fit after self-cal, rms=0.182667Jy sigma=0.002336 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8946 mas, bmaj=1.931 mas, bpa=0.6311 degrees ! Estimated noise=568.565 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.2, 5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0258281 Jy ! Component: 100 - total flux cleaned = 0.0258559 Jy ! Component: 150 - total flux cleaned = 0.0242496 Jy ! Component: 200 - total flux cleaned = 0.0232898 Jy ! Total flux subtracted in 200 components = 0.0232898 Jy ! Clean residual min=-0.021560 max=0.021486 Jy/beam ! Clean residual mean=0.000077 rms=0.004983 Jy/beam ! Combined flux in latest and established models = 1.32818 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 45 components and 1.32818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.175551Jy sigma=0.002274 ! Fit after self-cal, rms=0.175308Jy sigma=0.002272 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.175308Jy sigma=0.002272 ! Fit after self-cal, rms=0.172081Jy sigma=0.002239 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8898 mas, bmaj=1.904 mas, bpa=0.9782 degrees ! Estimated noise=563.776 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00691144 Jy ! Component: 100 - total flux cleaned = 0.00593724 Jy ! Component: 150 - total flux cleaned = 0.00485241 Jy ! Component: 200 - total flux cleaned = 0.00392749 Jy ! Total flux subtracted in 200 components = 0.00392749 Jy ! Clean residual min=-0.013278 max=0.014285 Jy/beam ! Clean residual mean=0.000118 rms=0.003081 Jy/beam ! Combined flux in latest and established models = 1.3321 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 59 components and 1.3321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.170642Jy sigma=0.002229 ! Fit after self-cal, rms=0.170527Jy sigma=0.002228 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.2, 12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00916743 Jy ! Component: 100 - total flux cleaned = 0.0122349 Jy ! Component: 150 - total flux cleaned = 0.0131815 Jy ! Component: 200 - total flux cleaned = 0.013583 Jy ! Total flux subtracted in 200 components = 0.013583 Jy ! Clean residual min=-0.010566 max=0.009288 Jy/beam ! Clean residual mean=0.000077 rms=0.002352 Jy/beam ! Combined flux in latest and established models = 1.34569 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 70 components and 1.34569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.168996Jy sigma=0.002216 ! Fit after self-cal, rms=0.168983Jy sigma=0.002215 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.168983Jy sigma=0.002215 ! Fit after self-cal, rms=0.168427Jy sigma=0.002214 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8886 mas, bmaj=1.902 mas, bpa=1.041 degrees ! Estimated noise=561.837 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000628967 Jy ! Component: 100 - total flux cleaned = 0.000453999 Jy ! Component: 150 - total flux cleaned = 0.000292596 Jy ! Component: 200 - total flux cleaned = -0.00032596 Jy ! Total flux subtracted in 200 components = -0.00032596 Jy ! Clean residual min=-0.008762 max=0.008115 Jy/beam ! Clean residual mean=0.000065 rms=0.002004 Jy/beam ! Combined flux in latest and established models = 1.34536 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 86 components and 1.34536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.167989Jy sigma=0.002211 ! Fit after self-cal, rms=0.167984Jy sigma=0.002211 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000207532 Jy ! Component: 100 - total flux cleaned = -0.000362836 Jy ! Component: 150 - total flux cleaned = -0.00089505 Jy ! Component: 200 - total flux cleaned = -0.00152336 Jy ! Total flux subtracted in 200 components = -0.00152336 Jy ! Clean residual min=-0.007872 max=0.007359 Jy/beam ! Clean residual mean=0.000061 rms=0.001864 Jy/beam ! Combined flux in latest and established models = 1.34384 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 94 components and 1.34384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.167719Jy sigma=0.002209 ! Fit after self-cal, rms=0.167715Jy sigma=0.002209 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.167715Jy sigma=0.002209 ! Fit after self-cal, rms=0.167527Jy sigma=0.002209 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.092 mas, bmaj=3.988 mas, bpa=-4.59 degrees ! Estimated noise=671.719 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.95463e-06 Jy ! Component: 100 - total flux cleaned = -0.00018699 Jy ! Component: 150 - total flux cleaned = -0.000798832 Jy ! Component: 200 - total flux cleaned = -0.00140683 Jy ! Total flux subtracted in 200 components = -0.00140683 Jy ! Clean residual min=-0.005780 max=0.005442 Jy/beam ! Clean residual mean=0.000127 rms=0.001674 Jy/beam ! Combined flux in latest and established models = 1.34243 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 104 components and 1.34243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.167533Jy sigma=0.002209 ! Fit after self-cal, rms=0.167513Jy sigma=0.002208 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000672821 Jy ! Component: 100 - total flux cleaned = -0.00123571 Jy ! Component: 150 - total flux cleaned = -0.00161715 Jy ! Component: 200 - total flux cleaned = -0.00202245 Jy ! Total flux subtracted in 200 components = -0.00202245 Jy ! Clean residual min=-0.005329 max=0.005027 Jy/beam ! Clean residual mean=0.000119 rms=0.001586 Jy/beam ! Combined flux in latest and established models = 1.34041 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 110 components and 1.34041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.167523Jy sigma=0.002208 ! Fit after self-cal, rms=0.167510Jy sigma=0.002208 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8881 mas, bmaj=1.9 mas, bpa=1.083 degrees ! Estimated noise=561.097 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8881 x 1.9 at 1.083 degrees (North through East) ! Clean map min=-0.0098626 max=0.9445 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.167510Jy sigma=0.002208 ! Fit after self-cal, rms=0.123706Jy sigma=0.000688 ! Inverting map and beam ! Estimated beam: bmin=0.8876 mas, bmaj=1.9 mas, bpa=0.9728 degrees ! Estimated noise=560.963 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000200557 Jy ! Component: 100 - total flux cleaned = 7.99762e-05 Jy ! Component: 150 - total flux cleaned = -0.000152143 Jy ! Component: 200 - total flux cleaned = -0.000691303 Jy ! Total flux subtracted in 200 components = -0.000691303 Jy ! Clean residual min=-0.006345 max=0.006758 Jy/beam ! Clean residual mean=0.000043 rms=0.001611 Jy/beam ! Combined flux in latest and established models = 1.33972 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 117 components and 1.33972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123416Jy sigma=0.000684 ! Fit after self-cal, rms=0.123409Jy sigma=0.000684 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000455006 Jy ! Component: 100 - total flux cleaned = 0.000165781 Jy ! Component: 150 - total flux cleaned = 0.000258679 Jy ! Component: 200 - total flux cleaned = 0.000169512 Jy ! Total flux subtracted in 200 components = 0.000169512 Jy ! Clean residual min=-0.005967 max=0.006655 Jy/beam ! Clean residual mean=0.000044 rms=0.001556 Jy/beam ! Combined flux in latest and established models = 1.33989 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 125 components and 1.33989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123231Jy sigma=0.000681 ! Fit after self-cal, rms=0.123224Jy sigma=0.000681 ! Inverting map ! Added new window around map position (-22.2, 24.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00294776 Jy ! Component: 100 - total flux cleaned = 0.00240015 Jy ! Component: 150 - total flux cleaned = 0.00216712 Jy ! Component: 200 - total flux cleaned = 0.00246966 Jy ! Total flux subtracted in 200 components = 0.00246966 Jy ! Clean residual min=-0.005326 max=0.004953 Jy/beam ! Clean residual mean=0.000040 rms=0.001340 Jy/beam ! Combined flux in latest and established models = 1.34236 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 139 components and 1.34236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122864Jy sigma=0.000673 ! Fit after self-cal, rms=0.122885Jy sigma=0.000673 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122885Jy sigma=0.000673 ! Fit after self-cal, rms=0.123034Jy sigma=0.000672 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7281 mas, bmaj=1.635 mas, bpa=0.9297 degrees ! Estimated noise=971.841 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.709804 Jy ! Component: 100 - total flux cleaned = 0.951867 Jy ! Component: 150 - total flux cleaned = 1.07765 Jy ! Component: 200 - total flux cleaned = 1.15019 Jy ! Total flux subtracted in 200 components = 1.15019 Jy ! Clean residual min=-0.029277 max=0.048435 Jy/beam ! Clean residual mean=-0.000256 rms=0.009298 Jy/beam ! Combined flux in latest and established models = 1.15019 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.15019 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8873 mas, bmaj=1.899 mas, bpa=1.011 degrees ! Estimated noise=560.253 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0655545 Jy ! Component: 100 - total flux cleaned = 0.100611 Jy ! Component: 150 - total flux cleaned = 0.121418 Jy ! Component: 200 - total flux cleaned = 0.133315 Jy ! Total flux subtracted in 200 components = 0.133315 Jy ! Clean residual min=-0.011482 max=0.016313 Jy/beam ! Clean residual mean=-0.000070 rms=0.003852 Jy/beam ! Combined flux in latest and established models = 1.2835 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 41 components and 1.2835 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.091 mas, bmaj=3.988 mas, bpa=-4.681 degrees ! Estimated noise=671.492 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200134 Jy ! Component: 100 - total flux cleaned = 0.0301777 Jy ! Component: 150 - total flux cleaned = 0.0353093 Jy ! Component: 200 - total flux cleaned = 0.0398785 Jy ! Total flux subtracted in 200 components = 0.0398785 Jy ! Clean residual min=-0.006753 max=0.007001 Jy/beam ! Clean residual mean=0.000069 rms=0.002355 Jy/beam ! Combined flux in latest and established models = 1.32338 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00399 Jy ! Component: 100 - total flux cleaned = 0.00755777 Jy ! Component: 150 - total flux cleaned = 0.0098214 Jy ! Component: 200 - total flux cleaned = 0.0112283 Jy ! Total flux subtracted in 200 components = 0.0112283 Jy ! Clean residual min=-0.004865 max=0.004417 Jy/beam ! Clean residual mean=0.000077 rms=0.001586 Jy/beam ! Combined flux in latest and established models = 1.33461 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 88 components and 1.33461 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8873 mas, bmaj=1.899 mas, bpa=1.011 degrees ! Estimated noise=560.253 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00182459 Jy ! Component: 100 - total flux cleaned = -0.00128202 Jy ! Component: 150 - total flux cleaned = -0.000334147 Jy ! Component: 200 - total flux cleaned = 9.21211e-05 Jy ! Total flux subtracted in 200 components = 9.21211e-05 Jy ! Clean residual min=-0.005694 max=0.007305 Jy/beam ! Clean residual mean=0.000013 rms=0.001554 Jy/beam ! Combined flux in latest and established models = 1.3347 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 103 components and 1.3347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123290Jy sigma=0.000677 ! Fit after self-cal, rms=0.123055Jy sigma=0.000672 wmodel J0211+1051_X_2014_01_04_pus_map.mod ! Writing 103 model components to file: J0211+1051_X_2014_01_04_pus_map.mod wobs J0211+1051_X_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0211+1051_X_2014_01_04_pus_uvs.fits wwins J0211+1051_X_2014_01_04_pus_map.win ! wwins: Wrote 5 windows to J0211+1051_X_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000616303 Jy ! Component: 100 - total flux cleaned = -0.000118922 Jy ! Component: 150 - total flux cleaned = -0.000616196 Jy ! Component: 200 - total flux cleaned = -0.0010806 Jy ! Component: 250 - total flux cleaned = -0.0012253 Jy ! Component: 300 - total flux cleaned = -0.00136276 Jy ! Component: 350 - total flux cleaned = -0.00162023 Jy ! Component: 400 - total flux cleaned = -0.00192475 Jy ! Component: 450 - total flux cleaned = -0.00227021 Jy ! Component: 500 - total flux cleaned = -0.00243437 Jy ! Component: 550 - total flux cleaned = -0.00248779 Jy ! Component: 600 - total flux cleaned = -0.00258984 Jy ! Component: 650 - total flux cleaned = -0.00263881 Jy ! Component: 700 - total flux cleaned = -0.00268502 Jy ! Component: 750 - total flux cleaned = -0.00281687 Jy ! Component: 800 - total flux cleaned = -0.00281734 Jy ! Component: 850 - total flux cleaned = -0.00285805 Jy ! Component: 900 - total flux cleaned = -0.00297406 Jy ! Component: 950 - total flux cleaned = -0.00293759 Jy ! Component: 1000 - total flux cleaned = -0.00293687 Jy ! Component: 1050 - total flux cleaned = -0.00283273 Jy ! Component: 1100 - total flux cleaned = -0.00269895 Jy ! Component: 1150 - total flux cleaned = -0.0025072 Jy ! Component: 1200 - total flux cleaned = -0.0022604 Jy ! Component: 1250 - total flux cleaned = -0.00202277 Jy ! Component: 1300 - total flux cleaned = -0.00182102 Jy ! Component: 1350 - total flux cleaned = -0.00159709 Jy ! Component: 1400 - total flux cleaned = -0.0014344 Jy ! Component: 1450 - total flux cleaned = -0.00124901 Jy ! Component: 1500 - total flux cleaned = -0.00114668 Jy ! Component: 1550 - total flux cleaned = -0.00104572 Jy ! Component: 1600 - total flux cleaned = -0.000874702 Jy ! Component: 1650 - total flux cleaned = -0.000708092 Jy ! Component: 1700 - total flux cleaned = -0.000569153 Jy ! Component: 1750 - total flux cleaned = -0.000410856 Jy ! Component: 1800 - total flux cleaned = -0.000300652 Jy ! Component: 1850 - total flux cleaned = -0.000214469 Jy ! Component: 1900 - total flux cleaned = -8.85995e-05 Jy ! Component: 1950 - total flux cleaned = -6.24634e-06 Jy ! Component: 2000 - total flux cleaned = 5.39618e-05 Jy ! Total flux subtracted in 2048 components = 0.00013249 Jy ! Clean residual min=-0.001090 max=0.001124 Jy/beam ! Clean residual mean=0.000002 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 1.33483 Jy keep ! Adding 132 model components to the UV plane model. ! The established model now contains 235 components and 1.33483 Jy ![Exited script file: muppet] wmap "J0211+1051_X_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8873 x 1.899 at 1.011 degrees (North through East) ! Clean map min=-0.0080342 max=0.95717 Jy/beam ! Writing clean map to FITS file: J0211+1051_X_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.957174 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000362537 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.113627 0.113627 0.227255 0.454509 0.909018 1.81804 3.63607 7.27215 14.5443 29.0886 58.1772 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.957 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8873 x 1.899 at 1.011 degrees (North through East) ! Clean map min=-0.0080342 max=0.95717 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0211+1051_X_2014_01_04_pus_uvs.log closed on Fri Jan 13 17:21:11 2017