! Started logfile: J0208-2650_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:01:42 2017 obs J0208-2650_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0208-2650_S_2015_01_23_pus_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.761404 visibilities/baseline/integration-bin. ! Found source: J0208-2650 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 7812 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0208-2650_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.885100Jy sigma=0.008175 ! Fit after self-cal, rms=0.869819Jy sigma=0.008029 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.375 mas, bmaj=6.35 mas, bpa=-6.198 degrees ! Estimated noise=1320.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102314 Jy ! Component: 100 - total flux cleaned = 0.124627 Jy ! Total flux subtracted in 100 components = 0.124627 Jy ! Clean residual min=-0.006059 max=0.007162 Jy/beam ! Clean residual mean=-0.000019 rms=0.001472 Jy/beam ! Combined flux in latest and established models = 0.124627 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.124627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095466Jy sigma=0.000812 ! Fit after self-cal, rms=0.095464Jy sigma=0.000811 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.858 mas, bmaj=7.365 mas, bpa=-4.976 degrees ! Estimated noise=882.915 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00889857 Jy ! Component: 100 - total flux cleaned = 0.0130683 Jy ! Component: 150 - total flux cleaned = 0.0154436 Jy ! Component: 200 - total flux cleaned = 0.0168529 Jy ! Total flux subtracted in 200 components = 0.0168529 Jy ! Clean residual min=-0.004773 max=0.006165 Jy/beam ! Clean residual mean=-0.000028 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 0.14148 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 36 components and 0.14148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094528Jy sigma=0.000805 ! Fit after self-cal, rms=0.094540Jy sigma=0.000805 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.09 KP 1.04 ! LA 1.04 MK 0.98 NL 1.11 OV 0.97 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.10 KP 1.04 ! LA 0.98 MK 1.02 NL 1.33 OV 1.00 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.10 KP 0.87 ! LA 0.78 MK 1.03 NL 1.21 OV 0.94 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 1.03 KP 0.83 ! LA 0.79 MK 0.97 NL 1.01 OV 1.00 ! PT 0.98 SC 0.97 ! ! ! Fit before self-cal, rms=0.094540Jy sigma=0.000805 ! Fit after self-cal, rms=0.092500Jy sigma=0.000787 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.869 mas, bmaj=7.362 mas, bpa=-4.639 degrees ! Estimated noise=883.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000410572 Jy ! Component: 100 - total flux cleaned = -0.000508791 Jy ! Component: 150 - total flux cleaned = -0.000528723 Jy ! Component: 200 - total flux cleaned = -0.000564654 Jy ! Total flux subtracted in 200 components = -0.000564654 Jy ! Clean residual min=-0.002581 max=0.002645 Jy/beam ! Clean residual mean=-0.000008 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.140915 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 0.140915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092488Jy sigma=0.000787 ! Fit after self-cal, rms=0.092537Jy sigma=0.000787 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092537Jy sigma=0.000787 ! Fit after self-cal, rms=0.092904Jy sigma=0.000785 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.87 mas, bmaj=7.358 mas, bpa=-4.595 degrees ! Estimated noise=883.312 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.41076e-05 Jy ! Component: 100 - total flux cleaned = 1.89802e-05 Jy ! Component: 150 - total flux cleaned = -8.40032e-06 Jy ! Component: 200 - total flux cleaned = -2.05584e-05 Jy ! Total flux subtracted in 200 components = -2.05584e-05 Jy ! Clean residual min=-0.002542 max=0.002433 Jy/beam ! Clean residual mean=-0.000004 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.140895 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.140895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092900Jy sigma=0.000785 ! Fit after self-cal, rms=0.092918Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.37925e-05 Jy ! Component: 100 - total flux cleaned = -3.75467e-05 Jy ! Component: 150 - total flux cleaned = -4.87103e-05 Jy ! Component: 200 - total flux cleaned = -6.99569e-05 Jy ! Total flux subtracted in 200 components = -6.99569e-05 Jy ! Clean residual min=-0.002538 max=0.002426 Jy/beam ! Clean residual mean=-0.000004 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.140825 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.140825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092916Jy sigma=0.000785 ! Fit after self-cal, rms=0.092916Jy sigma=0.000785 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092916Jy sigma=0.000785 ! Fit after self-cal, rms=0.093287Jy sigma=0.000785 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.871 mas, bmaj=7.355 mas, bpa=-4.599 degrees ! Estimated noise=883.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.28108e-05 Jy ! Component: 100 - total flux cleaned = -0.000125716 Jy ! Component: 150 - total flux cleaned = -0.000145406 Jy ! Component: 200 - total flux cleaned = -0.000164027 Jy ! Total flux subtracted in 200 components = -0.000164027 Jy ! Clean residual min=-0.002502 max=0.002444 Jy/beam ! Clean residual mean=-0.000002 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.140661 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.140661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093285Jy sigma=0.000785 ! Fit after self-cal, rms=0.093296Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.74584e-06 Jy ! Component: 100 - total flux cleaned = -2.72179e-05 Jy ! Component: 150 - total flux cleaned = -3.59915e-05 Jy ! Component: 200 - total flux cleaned = -5.23861e-05 Jy ! Total flux subtracted in 200 components = -5.23861e-05 Jy ! Clean residual min=-0.002500 max=0.002441 Jy/beam ! Clean residual mean=-0.000002 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.140608 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.140608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093295Jy sigma=0.000785 ! Fit after self-cal, rms=0.093294Jy sigma=0.000785 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093294Jy sigma=0.000785 ! Fit after self-cal, rms=0.093343Jy sigma=0.000785 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.399 mas, bmaj=17.58 mas, bpa=-0.5989 degrees ! Estimated noise=1154.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000423095 Jy ! Component: 100 - total flux cleaned = -0.000441462 Jy ! Component: 150 - total flux cleaned = -0.000448612 Jy ! Component: 200 - total flux cleaned = -0.000448284 Jy ! Total flux subtracted in 200 components = -0.000448284 Jy ! Clean residual min=-0.002724 max=0.002537 Jy/beam ! Clean residual mean=-0.000004 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.14016 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 51 components and 0.14016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093345Jy sigma=0.000785 ! Fit after self-cal, rms=0.093345Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.35558e-05 Jy ! Component: 100 - total flux cleaned = 6.40315e-07 Jy ! Component: 150 - total flux cleaned = 4.25533e-07 Jy ! Component: 200 - total flux cleaned = -5.59117e-06 Jy ! Total flux subtracted in 200 components = -5.59117e-06 Jy ! Clean residual min=-0.002723 max=0.002544 Jy/beam ! Clean residual mean=-0.000004 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.140155 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 55 components and 0.140155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093346Jy sigma=0.000785 ! Fit after self-cal, rms=0.093346Jy sigma=0.000785 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=7.353 mas, bpa=-4.594 degrees ! Estimated noise=883.059 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.872 x 7.353 at -4.594 degrees (North through East) ! Clean map min=-0.0024948 max=0.1329 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.378 mas, bmaj=6.301 mas, bpa=-5.825 degrees ! Estimated noise=1324.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102516 Jy ! Component: 100 - total flux cleaned = 0.12492 Jy ! Component: 150 - total flux cleaned = 0.131657 Jy ! Component: 200 - total flux cleaned = 0.134927 Jy ! Total flux subtracted in 200 components = 0.134927 Jy ! Clean residual min=-0.003962 max=0.004238 Jy/beam ! Clean residual mean=-0.000007 rms=0.001051 Jy/beam ! Combined flux in latest and established models = 0.134927 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.134927 Jy ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=7.353 mas, bpa=-4.594 degrees ! Estimated noise=883.059 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284369 Jy ! Component: 100 - total flux cleaned = 0.00408848 Jy ! Component: 150 - total flux cleaned = 0.00461284 Jy ! Component: 200 - total flux cleaned = 0.00472764 Jy ! Total flux subtracted in 200 components = 0.00472764 Jy ! Clean residual min=-0.002567 max=0.002425 Jy/beam ! Clean residual mean=-0.000004 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.139655 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 34 components and 0.139655 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.399 mas, bmaj=17.58 mas, bpa=-0.5989 degrees ! Estimated noise=1154.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000166409 Jy ! Component: 100 - total flux cleaned = 0.000201865 Jy ! Component: 150 - total flux cleaned = 0.000231229 Jy ! Component: 200 - total flux cleaned = 0.000248029 Jy ! Total flux subtracted in 200 components = 0.000248029 Jy ! Clean residual min=-0.002706 max=0.002513 Jy/beam ! Clean residual mean=-0.000005 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.139903 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.15922e-05 Jy ! Component: 100 - total flux cleaned = 2.2292e-05 Jy ! Component: 150 - total flux cleaned = 2.20378e-05 Jy ! Component: 200 - total flux cleaned = 2.79872e-05 Jy ! Total flux subtracted in 200 components = 2.79872e-05 Jy ! Clean residual min=-0.002715 max=0.002523 Jy/beam ! Clean residual mean=-0.000005 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.139931 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 40 components and 0.139931 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=7.353 mas, bpa=-4.594 degrees ! Estimated noise=883.059 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.46966e-06 Jy ! Component: 100 - total flux cleaned = -1.82588e-05 Jy ! Component: 150 - total flux cleaned = -1.80759e-05 Jy ! Component: 200 - total flux cleaned = -7.71456e-06 Jy ! Total flux subtracted in 200 components = -7.71456e-06 Jy ! Clean residual min=-0.002538 max=0.002424 Jy/beam ! Clean residual mean=-0.000003 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.139923 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.139923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093348Jy sigma=0.000785 ! Fit after self-cal, rms=0.093345Jy sigma=0.000785 wmodel J0208-2650_S_2015_01_23_pus_map.mod ! Writing 49 model components to file: J0208-2650_S_2015_01_23_pus_map.mod wobs J0208-2650_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0208-2650_S_2015_01_23_pus_uvs.fits wwins J0208-2650_S_2015_01_23_pus_map.win ! wwins: Wrote 1 windows to J0208-2650_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000136915 Jy ! Component: 100 - total flux cleaned = -0.00038133 Jy ! Component: 150 - total flux cleaned = -0.000693578 Jy ! Component: 200 - total flux cleaned = -0.000843832 Jy ! Component: 250 - total flux cleaned = -0.000915998 Jy ! Component: 300 - total flux cleaned = -0.000810678 Jy ! Component: 350 - total flux cleaned = -0.00077682 Jy ! Component: 400 - total flux cleaned = -0.000743953 Jy ! Component: 450 - total flux cleaned = -0.000744363 Jy ! Component: 500 - total flux cleaned = -0.000649928 Jy ! Component: 550 - total flux cleaned = -0.000588934 Jy ! Component: 600 - total flux cleaned = -0.000588568 Jy ! Component: 650 - total flux cleaned = -0.000529144 Jy ! Component: 700 - total flux cleaned = -0.000499254 Jy ! Component: 750 - total flux cleaned = -0.000470799 Jy ! Component: 800 - total flux cleaned = -0.000611161 Jy ! Component: 850 - total flux cleaned = -0.000611011 Jy ! Component: 900 - total flux cleaned = -0.000746395 Jy ! Component: 950 - total flux cleaned = -0.00074627 Jy ! Component: 1000 - total flux cleaned = -0.000878048 Jy ! Component: 1050 - total flux cleaned = -0.000851609 Jy ! Component: 1100 - total flux cleaned = -0.000826563 Jy ! Component: 1150 - total flux cleaned = -0.000877367 Jy ! Component: 1200 - total flux cleaned = -0.000827663 Jy ! Component: 1250 - total flux cleaned = -0.000876922 Jy ! Component: 1300 - total flux cleaned = -0.000852306 Jy ! Component: 1350 - total flux cleaned = -0.000780306 Jy ! Component: 1400 - total flux cleaned = -0.000804495 Jy ! Component: 1450 - total flux cleaned = -0.000827435 Jy ! Component: 1500 - total flux cleaned = -0.000804013 Jy ! Component: 1550 - total flux cleaned = -0.000827006 Jy ! Component: 1600 - total flux cleaned = -0.000849828 Jy ! Component: 1650 - total flux cleaned = -0.000849675 Jy ! Component: 1700 - total flux cleaned = -0.000783126 Jy ! Component: 1750 - total flux cleaned = -0.000761344 Jy ! Component: 1800 - total flux cleaned = -0.000718096 Jy ! Component: 1850 - total flux cleaned = -0.000739527 Jy ! Component: 1900 - total flux cleaned = -0.000696826 Jy ! Component: 1950 - total flux cleaned = -0.00071821 Jy ! Component: 2000 - total flux cleaned = -0.000739049 Jy ! Component: 2050 - total flux cleaned = -0.000739118 Jy ! Component: 2100 - total flux cleaned = -0.000739236 Jy ! Component: 2150 - total flux cleaned = -0.000718918 Jy ! Component: 2200 - total flux cleaned = -0.00071901 Jy ! Component: 2250 - total flux cleaned = -0.000699046 Jy ! Component: 2300 - total flux cleaned = -0.0006403 Jy ! Component: 2350 - total flux cleaned = -0.000659578 Jy ! Component: 2400 - total flux cleaned = -0.000678817 Jy ! Component: 2450 - total flux cleaned = -0.000716562 Jy ! Component: 2500 - total flux cleaned = -0.000659832 Jy ! Component: 2550 - total flux cleaned = -0.000604114 Jy ! Component: 2600 - total flux cleaned = -0.000641313 Jy ! Component: 2650 - total flux cleaned = -0.000604699 Jy ! Component: 2700 - total flux cleaned = -0.000713605 Jy ! Component: 2750 - total flux cleaned = -0.000641412 Jy ! Component: 2800 - total flux cleaned = -0.000587765 Jy ! Component: 2850 - total flux cleaned = -0.000658824 Jy ! Component: 2900 - total flux cleaned = -0.000711505 Jy ! Component: 2950 - total flux cleaned = -0.000694087 Jy ! Component: 3000 - total flux cleaned = -0.000745777 Jy ! Component: 3050 - total flux cleaned = -0.000763073 Jy ! Component: 3100 - total flux cleaned = -0.000729151 Jy ! Component: 3150 - total flux cleaned = -0.000762749 Jy ! Component: 3200 - total flux cleaned = -0.000762725 Jy ! Component: 3250 - total flux cleaned = -0.000746061 Jy ! Component: 3300 - total flux cleaned = -0.00076234 Jy ! Component: 3350 - total flux cleaned = -0.000745957 Jy ! Component: 3400 - total flux cleaned = -0.000746158 Jy ! Component: 3450 - total flux cleaned = -0.000793915 Jy ! Component: 3500 - total flux cleaned = -0.000793845 Jy ! Component: 3550 - total flux cleaned = -0.000762664 Jy ! Component: 3600 - total flux cleaned = -0.000778215 Jy ! Component: 3650 - total flux cleaned = -0.000793651 Jy ! Component: 3700 - total flux cleaned = -0.000824343 Jy ! Component: 3750 - total flux cleaned = -0.000763843 Jy ! Component: 3800 - total flux cleaned = -0.000794197 Jy ! Component: 3850 - total flux cleaned = -0.000839063 Jy ! Component: 3900 - total flux cleaned = -0.000824281 Jy ! Component: 3950 - total flux cleaned = -0.000824362 Jy ! Component: 4000 - total flux cleaned = -0.000868063 Jy ! Component: 4050 - total flux cleaned = -0.00088227 Jy ! Total flux subtracted in 4096 components = -0.000867818 Jy ! Clean residual min=-0.000931 max=0.000849 Jy/beam ! Clean residual mean=-0.000002 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.139056 Jy keep ! Adding 261 model components to the UV plane model. ! The established model now contains 310 components and 0.139056 Jy ![Exited script file: muppet] wmap "J0208-2650_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.872 x 7.353 at -4.594 degrees (North through East) ! Clean map min=-0.0016927 max=0.13342 Jy/beam ! Writing clean map to FITS file: J0208-2650_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.133419 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000253477 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.569958 0.569958 1.13992 2.27983 4.55966 9.11933 18.2387 36.4773 72.9546 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.133 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.872 x 7.353 at -4.594 degrees (North through East) ! Clean map min=-0.0016927 max=0.13342 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0208-2650_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:01:47 2017