! Started logfile: J0205+1444_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:14:08 2017 obs J0205+1444_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0205+1444_S_2014_01_04_pus_uva.fits ! AN table 1: 88 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.441288 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0205+1444 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5592 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0205+1444_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.912577Jy sigma=0.013325 ! Fit after self-cal, rms=0.902732Jy sigma=0.013193 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.077 mas, bmaj=5.569 mas, bpa=-2.218 degrees ! Estimated noise=907.678 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0763232 Jy ! Component: 100 - total flux cleaned = 0.0930718 Jy ! Total flux subtracted in 100 components = 0.0930718 Jy ! Clean residual min=-0.005233 max=0.005137 Jy/beam ! Clean residual mean=-0.000007 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.0930718 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0930718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075108Jy sigma=0.000908 ! Fit after self-cal, rms=0.075081Jy sigma=0.000908 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.505 mas, bmaj=5.868 mas, bpa=-5.53 degrees ! Estimated noise=691.224 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00657356 Jy ! Component: 100 - total flux cleaned = 0.0101505 Jy ! Component: 150 - total flux cleaned = 0.0125826 Jy ! Component: 200 - total flux cleaned = 0.0143632 Jy ! Total flux subtracted in 200 components = 0.0143632 Jy ! Clean residual min=-0.003346 max=0.003383 Jy/beam ! Clean residual mean=-0.000011 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.107435 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 48 components and 0.107435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074341Jy sigma=0.000901 ! Fit after self-cal, rms=0.074334Jy sigma=0.000901 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* KP 1.00* LA 1.04 ! MK 1.00 NL 0.99 OV 0.94 PT 1.04 ! SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* KP 1.00* LA 1.04 ! MK 0.99 NL 1.07 OV 0.95 PT 0.97 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* KP 1.00* LA 0.80 ! MK 1.00 NL 1.01 OV 0.96 PT 0.96 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.00* KP 1.00* LA 0.87 ! MK 1.00 NL 1.09 OV 0.97 PT 1.02 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.074334Jy sigma=0.000901 ! Fit after self-cal, rms=0.072335Jy sigma=0.000889 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.506 mas, bmaj=5.914 mas, bpa=-5.098 degrees ! Estimated noise=691.363 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000918591 Jy ! Component: 100 - total flux cleaned = 0.000995993 Jy ! Component: 150 - total flux cleaned = 0.0010855 Jy ! Component: 200 - total flux cleaned = 0.00116484 Jy ! Total flux subtracted in 200 components = 0.00116484 Jy ! Clean residual min=-0.002815 max=0.003117 Jy/beam ! Clean residual mean=-0.000001 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.1086 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 53 components and 0.1086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072306Jy sigma=0.000889 ! Fit after self-cal, rms=0.072115Jy sigma=0.000889 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072115Jy sigma=0.000889 ! Fit after self-cal, rms=0.071018Jy sigma=0.000887 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=5.948 mas, bpa=-5.529 degrees ! Estimated noise=691.985 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000667109 Jy ! Component: 100 - total flux cleaned = 0.00081694 Jy ! Component: 150 - total flux cleaned = 0.000857579 Jy ! Component: 200 - total flux cleaned = 0.000931589 Jy ! Total flux subtracted in 200 components = 0.000931589 Jy ! Clean residual min=-0.002597 max=0.002729 Jy/beam ! Clean residual mean=-0.000003 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.109531 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 59 components and 0.109531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071000Jy sigma=0.000887 ! Fit after self-cal, rms=0.070963Jy sigma=0.000887 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (68.5, 48). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223219 Jy ! Component: 100 - total flux cleaned = 0.00253561 Jy ! Component: 150 - total flux cleaned = 0.00262288 Jy ! Component: 200 - total flux cleaned = 0.00270085 Jy ! Total flux subtracted in 200 components = 0.00270085 Jy ! Clean residual min=-0.002406 max=0.002099 Jy/beam ! Clean residual mean=-0.000007 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.112232 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 78 components and 0.112232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070888Jy sigma=0.000885 ! Fit after self-cal, rms=0.070870Jy sigma=0.000885 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070870Jy sigma=0.000885 ! Fit after self-cal, rms=0.070804Jy sigma=0.000885 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.504 mas, bmaj=5.955 mas, bpa=-5.472 degrees ! Estimated noise=691.602 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.74679e-05 Jy ! Component: 100 - total flux cleaned = -3.4102e-05 Jy ! Component: 150 - total flux cleaned = -3.60605e-05 Jy ! Component: 200 - total flux cleaned = 3.85932e-06 Jy ! Total flux subtracted in 200 components = 3.85932e-06 Jy ! Clean residual min=-0.002276 max=0.002003 Jy/beam ! Clean residual mean=-0.000007 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.112236 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 91 components and 0.112236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070785Jy sigma=0.000885 ! Fit after self-cal, rms=0.070792Jy sigma=0.000885 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000134672 Jy ! Component: 100 - total flux cleaned = -9.75875e-05 Jy ! Component: 150 - total flux cleaned = -8.00167e-05 Jy ! Component: 200 - total flux cleaned = -6.32692e-05 Jy ! Total flux subtracted in 200 components = -6.32692e-05 Jy ! Clean residual min=-0.002235 max=0.002000 Jy/beam ! Clean residual mean=-0.000006 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.112173 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 99 components and 0.112173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070782Jy sigma=0.000885 ! Fit after self-cal, rms=0.070782Jy sigma=0.000885 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070782Jy sigma=0.000885 ! Fit after self-cal, rms=0.070901Jy sigma=0.000885 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.152 mas, bmaj=10.26 mas, bpa=8.079 degrees ! Estimated noise=823.265 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.87562e-05 Jy ! Component: 100 - total flux cleaned = 0.000178306 Jy ! Component: 150 - total flux cleaned = 0.000303308 Jy ! Component: 200 - total flux cleaned = 0.000381627 Jy ! Total flux subtracted in 200 components = 0.000381627 Jy ! Clean residual min=-0.001697 max=0.001928 Jy/beam ! Clean residual mean=-0.000012 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.112554 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 108 components and 0.112554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070898Jy sigma=0.000885 ! Fit after self-cal, rms=0.070909Jy sigma=0.000885 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00020853 Jy ! Component: 100 - total flux cleaned = -0.000152569 Jy ! Component: 150 - total flux cleaned = -0.000122003 Jy ! Component: 200 - total flux cleaned = -0.000112651 Jy ! Total flux subtracted in 200 components = -0.000112651 Jy ! Clean residual min=-0.001658 max=0.001938 Jy/beam ! Clean residual mean=-0.000011 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.112442 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 117 components and 0.112442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070908Jy sigma=0.000885 ! Fit after self-cal, rms=0.070909Jy sigma=0.000885 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.507 mas, bmaj=5.957 mas, bpa=-5.47 degrees ! Estimated noise=691.9 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.507 x 5.957 at -5.47 degrees (North through East) ! Clean map min=-0.0020133 max=0.097352 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.076 mas, bmaj=5.653 mas, bpa=-2.693 degrees ! Estimated noise=911.471 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0766983 Jy ! Component: 100 - total flux cleaned = 0.093467 Jy ! Component: 150 - total flux cleaned = 0.0987285 Jy ! Component: 200 - total flux cleaned = 0.1016 Jy ! Total flux subtracted in 200 components = 0.1016 Jy ! Clean residual min=-0.003466 max=0.003432 Jy/beam ! Clean residual mean=-0.000007 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.1016 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.1016 Jy ! Inverting map and beam ! Estimated beam: bmin=3.507 mas, bmaj=5.957 mas, bpa=-5.47 degrees ! Estimated noise=691.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00317987 Jy ! Component: 100 - total flux cleaned = 0.00522231 Jy ! Component: 150 - total flux cleaned = 0.0060984 Jy ! Component: 200 - total flux cleaned = 0.00675688 Jy ! Total flux subtracted in 200 components = 0.00675688 Jy ! Clean residual min=-0.002542 max=0.002186 Jy/beam ! Clean residual mean=-0.000012 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.108357 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 43 components and 0.108357 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.152 mas, bmaj=10.26 mas, bpa=8.079 degrees ! Estimated noise=823.265 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119521 Jy ! Component: 100 - total flux cleaned = 0.00137777 Jy ! Component: 150 - total flux cleaned = 0.00174551 Jy ! Component: 200 - total flux cleaned = 0.00200754 Jy ! Total flux subtracted in 200 components = 0.00200754 Jy ! Clean residual min=-0.001809 max=0.001989 Jy/beam ! Clean residual mean=-0.000015 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.110364 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239956 Jy ! Component: 100 - total flux cleaned = 0.000438119 Jy ! Component: 150 - total flux cleaned = 0.00057276 Jy ! Component: 200 - total flux cleaned = 0.000703026 Jy ! Total flux subtracted in 200 components = 0.000703026 Jy ! Clean residual min=-0.001715 max=0.001876 Jy/beam ! Clean residual mean=-0.000012 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.111067 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 81 components and 0.111067 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.507 mas, bmaj=5.957 mas, bpa=-5.47 degrees ! Estimated noise=691.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000347302 Jy ! Component: 100 - total flux cleaned = -0.000193433 Jy ! Component: 150 - total flux cleaned = -6.25537e-05 Jy ! Component: 200 - total flux cleaned = 0.000125244 Jy ! Total flux subtracted in 200 components = 0.000125244 Jy ! Clean residual min=-0.002222 max=0.001982 Jy/beam ! Clean residual mean=-0.000004 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.111193 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 94 components and 0.111193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070913Jy sigma=0.000885 ! Fit after self-cal, rms=0.070919Jy sigma=0.000885 wmodel J0205+1444_S_2014_01_04_pus_map.mod ! Writing 94 model components to file: J0205+1444_S_2014_01_04_pus_map.mod wobs J0205+1444_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0205+1444_S_2014_01_04_pus_uvs.fits wwins J0205+1444_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J0205+1444_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000295783 Jy ! Component: 100 - total flux cleaned = -5.87238e-05 Jy ! Component: 150 - total flux cleaned = -5.72646e-05 Jy ! Component: 200 - total flux cleaned = -0.000234186 Jy ! Component: 250 - total flux cleaned = -0.000545508 Jy ! Component: 300 - total flux cleaned = -0.000790964 Jy ! Component: 350 - total flux cleaned = -0.000974926 Jy ! Component: 400 - total flux cleaned = -0.00110169 Jy ! Component: 450 - total flux cleaned = -0.00119966 Jy ! Component: 500 - total flux cleaned = -0.00129444 Jy ! Component: 550 - total flux cleaned = -0.00141009 Jy ! Component: 600 - total flux cleaned = -0.00147786 Jy ! Component: 650 - total flux cleaned = -0.00154429 Jy ! Component: 700 - total flux cleaned = -0.00158763 Jy ! Component: 750 - total flux cleaned = -0.00165121 Jy ! Component: 800 - total flux cleaned = -0.00169256 Jy ! Component: 850 - total flux cleaned = -0.00175334 Jy ! Component: 900 - total flux cleaned = -0.00179305 Jy ! Component: 950 - total flux cleaned = -0.0017928 Jy ! Component: 1000 - total flux cleaned = -0.00183119 Jy ! Component: 1050 - total flux cleaned = -0.00181235 Jy ! Component: 1100 - total flux cleaned = -0.0018498 Jy ! Component: 1150 - total flux cleaned = -0.00188579 Jy ! Component: 1200 - total flux cleaned = -0.00184928 Jy ! Component: 1250 - total flux cleaned = -0.00186703 Jy ! Component: 1300 - total flux cleaned = -0.0019018 Jy ! Component: 1350 - total flux cleaned = -0.0018848 Jy ! Component: 1400 - total flux cleaned = -0.00190193 Jy ! Component: 1450 - total flux cleaned = -0.00198536 Jy ! Component: 1500 - total flux cleaned = -0.00196866 Jy ! Component: 1550 - total flux cleaned = -0.00196884 Jy ! Component: 1600 - total flux cleaned = -0.00204946 Jy ! Component: 1650 - total flux cleaned = -0.00211271 Jy ! Component: 1700 - total flux cleaned = -0.00208147 Jy ! Component: 1750 - total flux cleaned = -0.00209703 Jy ! Component: 1800 - total flux cleaned = -0.00217341 Jy ! Component: 1850 - total flux cleaned = -0.00220321 Jy ! Component: 1900 - total flux cleaned = -0.00218829 Jy ! Component: 1950 - total flux cleaned = -0.00221805 Jy ! Component: 2000 - total flux cleaned = -0.00226163 Jy ! Component: 2050 - total flux cleaned = -0.00224724 Jy ! Component: 2100 - total flux cleaned = -0.00228969 Jy ! Component: 2150 - total flux cleaned = -0.00235965 Jy ! Component: 2200 - total flux cleaned = -0.00238718 Jy ! Component: 2250 - total flux cleaned = -0.00245555 Jy ! Component: 2300 - total flux cleaned = -0.00246907 Jy ! Component: 2350 - total flux cleaned = -0.00250922 Jy ! Component: 2400 - total flux cleaned = -0.0025888 Jy ! Component: 2450 - total flux cleaned = -0.0026282 Jy ! Component: 2500 - total flux cleaned = -0.00266729 Jy ! Component: 2550 - total flux cleaned = -0.00269304 Jy ! Component: 2600 - total flux cleaned = -0.00275668 Jy ! Component: 2650 - total flux cleaned = -0.00275662 Jy ! Component: 2700 - total flux cleaned = -0.00278169 Jy ! Component: 2750 - total flux cleaned = -0.00274462 Jy ! Component: 2800 - total flux cleaned = -0.00280587 Jy ! Component: 2850 - total flux cleaned = -0.00279374 Jy ! Component: 2900 - total flux cleaned = -0.00281783 Jy ! Component: 2950 - total flux cleaned = -0.00286563 Jy ! Component: 3000 - total flux cleaned = -0.00286558 Jy ! Component: 3050 - total flux cleaned = -0.00287723 Jy ! Component: 3100 - total flux cleaned = -0.00292386 Jy ! Component: 3150 - total flux cleaned = -0.00296986 Jy ! Component: 3200 - total flux cleaned = -0.00301545 Jy ! Component: 3250 - total flux cleaned = -0.0030268 Jy ! Component: 3300 - total flux cleaned = -0.00306058 Jy ! Component: 3350 - total flux cleaned = -0.0031274 Jy ! Component: 3400 - total flux cleaned = -0.00316046 Jy ! Component: 3450 - total flux cleaned = -0.00319334 Jy ! Component: 3500 - total flux cleaned = -0.00322602 Jy ! Component: 3550 - total flux cleaned = -0.00325845 Jy ! Component: 3600 - total flux cleaned = -0.00326929 Jy ! Component: 3650 - total flux cleaned = -0.00333326 Jy ! Component: 3700 - total flux cleaned = -0.00337568 Jy ! Component: 3750 - total flux cleaned = -0.00341766 Jy ! Component: 3800 - total flux cleaned = -0.00340733 Jy ! Component: 3850 - total flux cleaned = -0.00344892 Jy ! Component: 3900 - total flux cleaned = -0.0034901 Jy ! Component: 3950 - total flux cleaned = -0.00352073 Jy ! Component: 4000 - total flux cleaned = -0.00355114 Jy ! Component: 4050 - total flux cleaned = -0.00358136 Jy ! Total flux subtracted in 4096 components = -0.00360134 Jy ! Clean residual min=-0.000761 max=0.000700 Jy/beam ! Clean residual mean=-0.000001 rms=0.000167 Jy/beam ! Combined flux in latest and established models = 0.107591 Jy keep ! Adding 221 model components to the UV plane model. ! The established model now contains 315 components and 0.107591 Jy ![Exited script file: muppet] wmap "J0205+1444_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.507 x 5.957 at -5.47 degrees (North through East) ! Clean map min=-0.0018423 max=0.097913 Jy/beam ! Writing clean map to FITS file: J0205+1444_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0979128 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000163624 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.501337 0.501337 1.00267 2.00535 4.0107 8.02139 16.0428 32.0856 64.1711 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.097 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.507 x 5.957 at -5.47 degrees (North through East) ! Clean map min=-0.0018423 max=0.097913 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0205+1444_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:14:12 2017