! Started logfile: J0202-0559_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:41:42 2016 obs J0202-0559_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J0202-0559_S_2015_03_17_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.873216 visibilities/baseline/integration-bin. ! Found source: J0202-0559 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 14932 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0202-0559_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.954847Jy sigma=0.009601 ! Fit after self-cal, rms=0.931585Jy sigma=0.009371 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.214 mas, bmaj=6.725 mas, bpa=3.622 degrees ! Estimated noise=910.235 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0531574 Jy ! Component: 100 - total flux cleaned = 0.0659542 Jy ! Total flux subtracted in 100 components = 0.0659542 Jy ! Clean residual min=-0.003834 max=0.005524 Jy/beam ! Clean residual mean=-0.000002 rms=0.001020 Jy/beam ! Combined flux in latest and established models = 0.0659542 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0659542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083708Jy sigma=0.000788 ! Fit after self-cal, rms=0.083664Jy sigma=0.000788 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.87 mas, bmaj=7.845 mas, bpa=4.336 degrees ! Estimated noise=583.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00767312 Jy ! Component: 100 - total flux cleaned = 0.0118495 Jy ! Component: 150 - total flux cleaned = 0.0143135 Jy ! Component: 200 - total flux cleaned = 0.0158172 Jy ! Total flux subtracted in 200 components = 0.0158172 Jy ! Clean residual min=-0.003132 max=0.003627 Jy/beam ! Clean residual mean=0.000012 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.0817714 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 42 components and 0.0817714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082853Jy sigma=0.000781 ! Fit after self-cal, rms=0.082856Jy sigma=0.000781 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.91 HN 1.07 KP 1.08 ! LA 0.92 MK 1.06 NL 0.91 OV 1.03 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.90 HN 1.03 KP 1.06 ! LA 0.91 MK 1.02 NL 1.12 OV 1.10 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.90 HN 1.05 KP 0.91 ! LA 0.78 MK 1.17 NL 1.23 OV 1.03 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.94 HN 1.01 KP 0.89 ! LA 0.82 MK 1.02 NL 0.99 OV 1.12 ! PT 1.00 SC 0.99 ! ! ! Fit before self-cal, rms=0.082856Jy sigma=0.000781 ! Fit after self-cal, rms=0.080765Jy sigma=0.000776 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.919 mas, bmaj=7.989 mas, bpa=4.937 degrees ! Estimated noise=587.673 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118361 Jy ! Component: 100 - total flux cleaned = 5.48073e-05 Jy ! Component: 150 - total flux cleaned = -4.75322e-05 Jy ! Component: 200 - total flux cleaned = -0.000117105 Jy ! Total flux subtracted in 200 components = -0.000117105 Jy ! Clean residual min=-0.001877 max=0.002351 Jy/beam ! Clean residual mean=0.000004 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.0816543 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.0816543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080755Jy sigma=0.000776 ! Fit after self-cal, rms=0.080720Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080720Jy sigma=0.000776 ! Fit after self-cal, rms=0.080928Jy sigma=0.000775 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.926 mas, bmaj=8.022 mas, bpa=5.053 degrees ! Estimated noise=587.795 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.22082e-05 Jy ! Component: 100 - total flux cleaned = -0.000126093 Jy ! Component: 150 - total flux cleaned = -0.000186647 Jy ! Component: 200 - total flux cleaned = -0.000247067 Jy ! Total flux subtracted in 200 components = -0.000247067 Jy ! Clean residual min=-0.001871 max=0.002263 Jy/beam ! Clean residual mean=0.000005 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.0814072 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 53 components and 0.0814072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080923Jy sigma=0.000775 ! Fit after self-cal, rms=0.080938Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196534 Jy ! Component: 100 - total flux cleaned = 0.0020911 Jy ! Component: 150 - total flux cleaned = 0.00203543 Jy ! Component: 200 - total flux cleaned = 0.00194038 Jy ! Total flux subtracted in 200 components = 0.00194038 Jy ! Clean residual min=-0.001821 max=0.002049 Jy/beam ! Clean residual mean=0.000004 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.0833476 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 79 components and 0.0833476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080887Jy sigma=0.000774 ! Fit after self-cal, rms=0.080877Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080877Jy sigma=0.000774 ! Fit after self-cal, rms=0.080571Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.918 mas, bmaj=8.017 mas, bpa=5.247 degrees ! Estimated noise=585.908 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000991549 Jy ! Component: 100 - total flux cleaned = 0.000943631 Jy ! Component: 150 - total flux cleaned = 0.000904417 Jy ! Component: 200 - total flux cleaned = 0.000867999 Jy ! Total flux subtracted in 200 components = 0.000867999 Jy ! Clean residual min=-0.001764 max=0.001934 Jy/beam ! Clean residual mean=0.000004 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0842156 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 92 components and 0.0842156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080554Jy sigma=0.000774 ! Fit after self-cal, rms=0.080549Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000210161 Jy ! Component: 100 - total flux cleaned = 0.000192541 Jy ! Component: 150 - total flux cleaned = 0.000161946 Jy ! Component: 200 - total flux cleaned = 0.0001329 Jy ! Total flux subtracted in 200 components = 0.0001329 Jy ! Clean residual min=-0.001759 max=0.001934 Jy/beam ! Clean residual mean=0.000004 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0843485 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 99 components and 0.0843485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080543Jy sigma=0.000774 ! Fit after self-cal, rms=0.080541Jy sigma=0.000774 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080541Jy sigma=0.000774 ! Fit after self-cal, rms=0.080258Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.733 mas, bmaj=12.79 mas, bpa=-0.4298 degrees ! Estimated noise=690.348 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000258157 Jy ! Component: 100 - total flux cleaned = 0.000240716 Jy ! Component: 150 - total flux cleaned = 0.000196848 Jy ! Component: 200 - total flux cleaned = 0.000158462 Jy ! Total flux subtracted in 200 components = 0.000158462 Jy ! Clean residual min=-0.001967 max=0.001652 Jy/beam ! Clean residual mean=0.000006 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.084507 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 115 components and 0.084507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080254Jy sigma=0.000774 ! Fit after self-cal, rms=0.080249Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.59701e-06 Jy ! Component: 100 - total flux cleaned = -3.04516e-05 Jy ! Component: 150 - total flux cleaned = -4.08844e-05 Jy ! Component: 200 - total flux cleaned = -5.07443e-05 Jy ! Total flux subtracted in 200 components = -5.07443e-05 Jy ! Clean residual min=-0.001954 max=0.001610 Jy/beam ! Clean residual mean=0.000006 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.0844562 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 127 components and 0.0844562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080247Jy sigma=0.000774 ! Fit after self-cal, rms=0.080247Jy sigma=0.000774 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.915 mas, bmaj=8.016 mas, bpa=5.329 degrees ! Estimated noise=584.107 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.915 x 8.016 at 5.329 degrees (North through East) ! Clean map min=-0.0016756 max=0.06835 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.249 mas, bmaj=6.844 mas, bpa=4.573 degrees ! Estimated noise=915.001 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0531323 Jy ! Component: 100 - total flux cleaned = 0.0663688 Jy ! Component: 150 - total flux cleaned = 0.0725176 Jy ! Component: 200 - total flux cleaned = 0.0764697 Jy ! Total flux subtracted in 200 components = 0.0764697 Jy ! Clean residual min=-0.002838 max=0.002591 Jy/beam ! Clean residual mean=-0.000000 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.0764697 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.0764697 Jy ! Inverting map and beam ! Estimated beam: bmin=3.915 mas, bmaj=8.016 mas, bpa=5.329 degrees ! Estimated noise=584.107 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00327019 Jy ! Component: 100 - total flux cleaned = 0.00522471 Jy ! Component: 150 - total flux cleaned = 0.00603757 Jy ! Component: 200 - total flux cleaned = 0.00660268 Jy ! Total flux subtracted in 200 components = 0.00660268 Jy ! Clean residual min=-0.001957 max=0.001904 Jy/beam ! Clean residual mean=0.000003 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0830723 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 69 components and 0.0830723 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.733 mas, bmaj=12.79 mas, bpa=-0.4298 degrees ! Estimated noise=690.348 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000532968 Jy ! Component: 100 - total flux cleaned = 0.000755366 Jy ! Component: 150 - total flux cleaned = 0.000929565 Jy ! Component: 200 - total flux cleaned = 0.00100858 Jy ! Total flux subtracted in 200 components = 0.00100858 Jy ! Clean residual min=-0.002006 max=0.001645 Jy/beam ! Clean residual mean=0.000006 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.0840809 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.49848e-05 Jy ! Component: 100 - total flux cleaned = 0.0001044 Jy ! Component: 150 - total flux cleaned = 0.000137165 Jy ! Component: 200 - total flux cleaned = 0.000137154 Jy ! Total flux subtracted in 200 components = 0.000137154 Jy ! Clean residual min=-0.001973 max=0.001644 Jy/beam ! Clean residual mean=0.000005 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.0842181 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 106 components and 0.0842181 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.915 mas, bmaj=8.016 mas, bpa=5.329 degrees ! Estimated noise=584.107 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000124581 Jy ! Component: 100 - total flux cleaned = -6.98437e-05 Jy ! Component: 150 - total flux cleaned = -2.35076e-06 Jy ! Component: 200 - total flux cleaned = 4.45259e-05 Jy ! Total flux subtracted in 200 components = 4.45259e-05 Jy ! Clean residual min=-0.001780 max=0.001904 Jy/beam ! Clean residual mean=0.000003 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.0842626 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 118 components and 0.0842626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080254Jy sigma=0.000774 ! Fit after self-cal, rms=0.080249Jy sigma=0.000774 wmodel J0202-0559_S_2015_03_17_pus_map.mod ! Writing 118 model components to file: J0202-0559_S_2015_03_17_pus_map.mod wobs J0202-0559_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J0202-0559_S_2015_03_17_pus_uvs.fits wwins J0202-0559_S_2015_03_17_pus_map.win ! wwins: Wrote 2 windows to J0202-0559_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173613 Jy ! Component: 100 - total flux cleaned = 0.000262391 Jy ! Component: 150 - total flux cleaned = 0.000345454 Jy ! Component: 200 - total flux cleaned = 0.000318259 Jy ! Component: 250 - total flux cleaned = 0.000215398 Jy ! Component: 300 - total flux cleaned = 0.000165742 Jy ! Component: 350 - total flux cleaned = 0.000189645 Jy ! Component: 400 - total flux cleaned = 0.000190027 Jy ! Component: 450 - total flux cleaned = 0.000236991 Jy ! Component: 500 - total flux cleaned = 0.00028283 Jy ! Component: 550 - total flux cleaned = 0.000305302 Jy ! Component: 600 - total flux cleaned = 0.000370607 Jy ! Component: 650 - total flux cleaned = 0.000371043 Jy ! Component: 700 - total flux cleaned = 0.0004343 Jy ! Component: 750 - total flux cleaned = 0.000434941 Jy ! Component: 800 - total flux cleaned = 0.000555771 Jy ! Component: 850 - total flux cleaned = 0.000516308 Jy ! Component: 900 - total flux cleaned = 0.000594408 Jy ! Component: 950 - total flux cleaned = 0.00055619 Jy ! Component: 1000 - total flux cleaned = 0.000669234 Jy ! Component: 1050 - total flux cleaned = 0.000687841 Jy ! Component: 1100 - total flux cleaned = 0.000761191 Jy ! Component: 1150 - total flux cleaned = 0.000815463 Jy ! Component: 1200 - total flux cleaned = 0.000887041 Jy ! Component: 1250 - total flux cleaned = 0.000940187 Jy ! Component: 1300 - total flux cleaned = 0.0010623 Jy ! Component: 1350 - total flux cleaned = 0.00109663 Jy ! Component: 1400 - total flux cleaned = 0.00109675 Jy ! Component: 1450 - total flux cleaned = 0.00121396 Jy ! Component: 1500 - total flux cleaned = 0.00123011 Jy ! Component: 1550 - total flux cleaned = 0.00124657 Jy ! Component: 1600 - total flux cleaned = 0.00124669 Jy ! Component: 1650 - total flux cleaned = 0.00124694 Jy ! Component: 1700 - total flux cleaned = 0.0012628 Jy ! Component: 1750 - total flux cleaned = 0.00127858 Jy ! Component: 1800 - total flux cleaned = 0.00124758 Jy ! Component: 1850 - total flux cleaned = 0.00121703 Jy ! Component: 1900 - total flux cleaned = 0.00121726 Jy ! Component: 1950 - total flux cleaned = 0.00126237 Jy ! Component: 2000 - total flux cleaned = 0.00121748 Jy ! Component: 2050 - total flux cleaned = 0.00117333 Jy ! Component: 2100 - total flux cleaned = 0.00115868 Jy ! Component: 2150 - total flux cleaned = 0.00124525 Jy ! Component: 2200 - total flux cleaned = 0.00124533 Jy ! Component: 2250 - total flux cleaned = 0.00124527 Jy ! Component: 2300 - total flux cleaned = 0.00128742 Jy ! Component: 2350 - total flux cleaned = 0.00125976 Jy ! Component: 2400 - total flux cleaned = 0.00127358 Jy ! Component: 2450 - total flux cleaned = 0.0013146 Jy ! Component: 2500 - total flux cleaned = 0.00136899 Jy ! Component: 2550 - total flux cleaned = 0.00138256 Jy ! Component: 2600 - total flux cleaned = 0.00143575 Jy ! Component: 2650 - total flux cleaned = 0.00142244 Jy ! Component: 2700 - total flux cleaned = 0.00139634 Jy ! Component: 2750 - total flux cleaned = 0.00143527 Jy ! Component: 2800 - total flux cleaned = 0.00139655 Jy ! Component: 2850 - total flux cleaned = 0.00144765 Jy ! Component: 2900 - total flux cleaned = 0.00142233 Jy ! Component: 2950 - total flux cleaned = 0.0014223 Jy ! Component: 3000 - total flux cleaned = 0.00143482 Jy ! Component: 3050 - total flux cleaned = 0.00144702 Jy ! Component: 3100 - total flux cleaned = 0.00144702 Jy ! Component: 3150 - total flux cleaned = 0.00145926 Jy ! Component: 3200 - total flux cleaned = 0.00145938 Jy ! Component: 3250 - total flux cleaned = 0.00148346 Jy ! Component: 3300 - total flux cleaned = 0.00153134 Jy ! Component: 3350 - total flux cleaned = 0.00150762 Jy ! Component: 3400 - total flux cleaned = 0.00151944 Jy ! Component: 3450 - total flux cleaned = 0.00149611 Jy ! Component: 3500 - total flux cleaned = 0.00153099 Jy ! Component: 3550 - total flux cleaned = 0.00149633 Jy ! Component: 3600 - total flux cleaned = 0.00151931 Jy ! Component: 3650 - total flux cleaned = 0.00157601 Jy ! Component: 3700 - total flux cleaned = 0.00153083 Jy ! Component: 3750 - total flux cleaned = 0.0015309 Jy ! Component: 3800 - total flux cleaned = 0.00154197 Jy ! Component: 3850 - total flux cleaned = 0.00154196 Jy ! Component: 3900 - total flux cleaned = 0.00158573 Jy ! Component: 3950 - total flux cleaned = 0.00158566 Jy ! Component: 4000 - total flux cleaned = 0.00159632 Jy ! Component: 4050 - total flux cleaned = 0.00160705 Jy ! Total flux subtracted in 4096 components = 0.00160716 Jy ! Clean residual min=-0.000692 max=0.000623 Jy/beam ! Clean residual mean=0.000001 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.0858698 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 391 components and 0.0858697 Jy ![Exited script file: muppet] wmap "J0202-0559_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.915 x 8.016 at 5.329 degrees (North through East) ! Clean map min=-0.0014226 max=0.068479 Jy/beam ! Writing clean map to FITS file: J0202-0559_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0684787 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000191244 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.837824 0.837824 1.67565 3.3513 6.7026 13.4052 26.8104 53.6208 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.068 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.915 x 8.016 at 5.329 degrees (North through East) ! Clean map min=-0.0014226 max=0.068479 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0202-0559_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:41:49 2016