! Started logfile: J0158-1413_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:01:14 2017 obs J0158-1413_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0158-1413_S_2015_01_23_pus_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.971605 visibilities/baseline/integration-bin. ! Found source: J0158-1413 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 12592 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0158-1413_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.778618Jy sigma=0.007397 ! Fit after self-cal, rms=0.754161Jy sigma=0.007144 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.618 mas, bmaj=6.369 mas, bpa=-3.111 degrees ! Estimated noise=918.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.205916 Jy ! Component: 100 - total flux cleaned = 0.270056 Jy ! Total flux subtracted in 100 components = 0.270056 Jy ! Clean residual min=-0.025284 max=0.043453 Jy/beam ! Clean residual mean=0.000095 rms=0.007721 Jy/beam ! Combined flux in latest and established models = 0.270056 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.270056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193574Jy sigma=0.001742 ! Fit after self-cal, rms=0.193514Jy sigma=0.001741 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.093 mas, bmaj=7.492 mas, bpa=-3.899 degrees ! Estimated noise=675.755 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0449009 Jy ! Component: 100 - total flux cleaned = 0.0663859 Jy ! Component: 150 - total flux cleaned = 0.0769116 Jy ! Component: 200 - total flux cleaned = 0.078355 Jy ! Total flux subtracted in 200 components = 0.078355 Jy ! Clean residual min=-0.032336 max=0.051364 Jy/beam ! Clean residual mean=0.000173 rms=0.011136 Jy/beam ! Combined flux in latest and established models = 0.348411 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 24 components and 0.348411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187819Jy sigma=0.001621 ! Fit after self-cal, rms=0.187802Jy sigma=0.001621 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 2.07 HN 1.02 KP 1.21 ! LA 1.00 MK 0.96 NL 1.09 OV 0.84 ! PT 0.95 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 2.50 HN 1.08 KP 1.12 ! LA 0.96 MK 0.97 NL 1.22 OV 0.87 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 2.62 HN 1.11 KP 0.95 ! LA 0.79 MK 0.98 NL 1.28 OV 0.80 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 2.22 HN 1.02 KP 0.87 ! LA 0.82 MK 0.97 NL 0.99 OV 0.85 ! PT 1.01 SC 0.94 ! ! ! Fit before self-cal, rms=0.187802Jy sigma=0.001621 ! Fit after self-cal, rms=0.228901Jy sigma=0.001472 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=7.331 mas, bpa=-3.179 degrees ! Estimated noise=664.786 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.052366 Jy ! Component: 100 - total flux cleaned = 0.0788581 Jy ! Component: 150 - total flux cleaned = 0.0958052 Jy ! Component: 200 - total flux cleaned = 0.10821 Jy ! Total flux subtracted in 200 components = 0.10821 Jy ! Clean residual min=-0.025309 max=0.037047 Jy/beam ! Clean residual mean=0.000046 rms=0.007277 Jy/beam ! Combined flux in latest and established models = 0.45662 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 65 components and 0.45662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218516Jy sigma=0.001249 ! Fit after self-cal, rms=0.218580Jy sigma=0.001237 ! Inverting map ! Added new window around map position (-29, -9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0315011 Jy ! Component: 100 - total flux cleaned = 0.0482117 Jy ! Component: 150 - total flux cleaned = 0.0611333 Jy ! Component: 200 - total flux cleaned = 0.0719605 Jy ! Total flux subtracted in 200 components = 0.0719605 Jy ! Clean residual min=-0.021304 max=0.028881 Jy/beam ! Clean residual mean=0.000054 rms=0.005845 Jy/beam ! Combined flux in latest and established models = 0.528581 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 108 components and 0.528581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214171Jy sigma=0.001134 ! Fit after self-cal, rms=0.213804Jy sigma=0.001130 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213804Jy sigma=0.001130 ! Fit after self-cal, rms=0.226501Jy sigma=0.001024 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=7.494 mas, bpa=-2.976 degrees ! Estimated noise=650.885 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00967024 Jy ! Component: 100 - total flux cleaned = 0.0153213 Jy ! Component: 150 - total flux cleaned = 0.0182762 Jy ! Component: 200 - total flux cleaned = 0.0198606 Jy ! Total flux subtracted in 200 components = 0.0198606 Jy ! Clean residual min=-0.014027 max=0.022896 Jy/beam ! Clean residual mean=0.000034 rms=0.004295 Jy/beam ! Combined flux in latest and established models = 0.548441 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 133 components and 0.548441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226012Jy sigma=0.001001 ! Fit after self-cal, rms=0.226264Jy sigma=0.000999 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13.5, -34.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221976 Jy ! Component: 100 - total flux cleaned = 0.0344222 Jy ! Component: 150 - total flux cleaned = 0.0402994 Jy ! Component: 200 - total flux cleaned = 0.042898 Jy ! Total flux subtracted in 200 components = 0.042898 Jy ! Clean residual min=-0.011635 max=0.018983 Jy/beam ! Clean residual mean=0.000008 rms=0.003206 Jy/beam ! Combined flux in latest and established models = 0.591339 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 160 components and 0.591339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224393Jy sigma=0.000931 ! Fit after self-cal, rms=0.224057Jy sigma=0.000928 ! Inverting map ! Added new window around map position (-4, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166694 Jy ! Component: 100 - total flux cleaned = 0.0229036 Jy ! Component: 150 - total flux cleaned = 0.0237285 Jy ! Component: 200 - total flux cleaned = 0.0246887 Jy ! Total flux subtracted in 200 components = 0.0246887 Jy ! Clean residual min=-0.010358 max=0.011174 Jy/beam ! Clean residual mean=0.000020 rms=0.002795 Jy/beam ! Combined flux in latest and established models = 0.616028 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 185 components and 0.616028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222681Jy sigma=0.000894 ! Fit after self-cal, rms=0.222693Jy sigma=0.000890 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222693Jy sigma=0.000890 ! Fit after self-cal, rms=0.228954Jy sigma=0.000885 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.093 mas, bmaj=7.497 mas, bpa=-2.934 degrees ! Estimated noise=648.153 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00801399 Jy ! Component: 100 - total flux cleaned = 0.0101895 Jy ! Component: 150 - total flux cleaned = 0.0114631 Jy ! Component: 200 - total flux cleaned = 0.012623 Jy ! Total flux subtracted in 200 components = 0.012623 Jy ! Clean residual min=-0.009138 max=0.011039 Jy/beam ! Clean residual mean=0.000013 rms=0.002520 Jy/beam ! Combined flux in latest and established models = 0.628651 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 209 components and 0.628651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228488Jy sigma=0.000872 ! Fit after self-cal, rms=0.228481Jy sigma=0.000871 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-117, 124.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100395 Jy ! Component: 100 - total flux cleaned = 0.0135357 Jy ! Component: 150 - total flux cleaned = 0.0152301 Jy ! Component: 200 - total flux cleaned = 0.0158937 Jy ! Total flux subtracted in 200 components = 0.0158937 Jy ! Clean residual min=-0.007884 max=0.008845 Jy/beam ! Clean residual mean=0.000009 rms=0.002191 Jy/beam ! Combined flux in latest and established models = 0.644545 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 235 components and 0.644545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228057Jy sigma=0.000854 ! Fit after self-cal, rms=0.228095Jy sigma=0.000854 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228095Jy sigma=0.000854 ! Fit after self-cal, rms=0.231369Jy sigma=0.000852 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.406 mas, bmaj=14.1 mas, bpa=-2.046 degrees ! Estimated noise=851.339 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00821319 Jy ! Component: 100 - total flux cleaned = 0.0120602 Jy ! Component: 150 - total flux cleaned = 0.0135171 Jy ! Component: 200 - total flux cleaned = 0.0145875 Jy ! Total flux subtracted in 200 components = 0.0145875 Jy ! Clean residual min=-0.010320 max=0.013440 Jy/beam ! Clean residual mean=-0.000002 rms=0.003403 Jy/beam ! Combined flux in latest and established models = 0.659132 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 254 components and 0.659132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.231208Jy sigma=0.000847 ! Fit after self-cal, rms=0.231177Jy sigma=0.000846 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173325 Jy ! Component: 100 - total flux cleaned = 0.00229775 Jy ! Component: 150 - total flux cleaned = 0.00242209 Jy ! Component: 200 - total flux cleaned = 0.0026474 Jy ! Total flux subtracted in 200 components = 0.0026474 Jy ! Clean residual min=-0.010194 max=0.012562 Jy/beam ! Clean residual mean=-0.000007 rms=0.003250 Jy/beam ! Combined flux in latest and established models = 0.66178 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 275 components and 0.66178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.231135Jy sigma=0.000845 ! Fit after self-cal, rms=0.231154Jy sigma=0.000844 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=7.497 mas, bpa=-3.036 degrees ! Estimated noise=648.125 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.092 x 7.497 at -3.036 degrees (North through East) ! Clean map min=-0.0077698 max=0.27333 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.617 mas, bmaj=6.388 mas, bpa=-1.67 degrees ! Estimated noise=885.042 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.197367 Jy ! Component: 100 - total flux cleaned = 0.264127 Jy ! Component: 150 - total flux cleaned = 0.309536 Jy ! Component: 200 - total flux cleaned = 0.345894 Jy ! Total flux subtracted in 200 components = 0.345894 Jy ! Clean residual min=-0.016466 max=0.021936 Jy/beam ! Clean residual mean=-0.000000 rms=0.005159 Jy/beam ! Combined flux in latest and established models = 0.345894 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.345894 Jy ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=7.497 mas, bpa=-3.036 degrees ! Estimated noise=648.125 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0436498 Jy ! Component: 100 - total flux cleaned = 0.0779749 Jy ! Component: 150 - total flux cleaned = 0.106353 Jy ! Component: 200 - total flux cleaned = 0.130276 Jy ! Total flux subtracted in 200 components = 0.130276 Jy ! Clean residual min=-0.013375 max=0.018783 Jy/beam ! Clean residual mean=0.000006 rms=0.004966 Jy/beam ! Combined flux in latest and established models = 0.47617 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 83 components and 0.47617 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.406 mas, bmaj=14.1 mas, bpa=-2.046 degrees ! Estimated noise=851.339 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0374507 Jy ! Component: 100 - total flux cleaned = 0.0651485 Jy ! Component: 150 - total flux cleaned = 0.0866257 Jy ! Component: 200 - total flux cleaned = 0.103609 Jy ! Total flux subtracted in 200 components = 0.103609 Jy ! Clean residual min=-0.015471 max=0.018094 Jy/beam ! Clean residual mean=-0.000002 rms=0.005404 Jy/beam ! Combined flux in latest and established models = 0.579779 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136843 Jy ! Component: 100 - total flux cleaned = 0.0248967 Jy ! Component: 150 - total flux cleaned = 0.0342477 Jy ! Component: 200 - total flux cleaned = 0.042126 Jy ! Total flux subtracted in 200 components = 0.042126 Jy ! Clean residual min=-0.012578 max=0.014688 Jy/beam ! Clean residual mean=-0.000004 rms=0.004057 Jy/beam ! Combined flux in latest and established models = 0.621905 Jy ! Adding 147 model components to the UV plane model. ! The established model now contains 214 components and 0.621906 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=7.497 mas, bpa=-3.036 degrees ! Estimated noise=648.125 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198549 Jy ! Component: 100 - total flux cleaned = 0.00575652 Jy ! Component: 150 - total flux cleaned = 0.00898202 Jy ! Component: 200 - total flux cleaned = 0.0116117 Jy ! Total flux subtracted in 200 components = 0.0116117 Jy ! Clean residual min=-0.008427 max=0.008724 Jy/beam ! Clean residual mean=0.000002 rms=0.002127 Jy/beam ! Combined flux in latest and established models = 0.633517 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 239 components and 0.633517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.231054Jy sigma=0.000852 ! Fit after self-cal, rms=0.230949Jy sigma=0.000847 wmodel J0158-1413_S_2015_01_23_pus_map.mod ! Writing 239 model components to file: J0158-1413_S_2015_01_23_pus_map.mod wobs J0158-1413_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0158-1413_S_2015_01_23_pus_uvs.fits wwins J0158-1413_S_2015_01_23_pus_map.win ! wwins: Wrote 6 windows to J0158-1413_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021725 Jy ! Component: 100 - total flux cleaned = 0.00286715 Jy ! Component: 150 - total flux cleaned = 0.00312079 Jy ! Component: 200 - total flux cleaned = 0.00348701 Jy ! Component: 250 - total flux cleaned = 0.00394589 Jy ! Component: 300 - total flux cleaned = 0.00416639 Jy ! Component: 350 - total flux cleaned = 0.00479332 Jy ! Component: 400 - total flux cleaned = 0.00519392 Jy ! Component: 450 - total flux cleaned = 0.00538674 Jy ! Component: 500 - total flux cleaned = 0.00585088 Jy ! Component: 550 - total flux cleaned = 0.00603005 Jy ! Component: 600 - total flux cleaned = 0.00647004 Jy ! Component: 650 - total flux cleaned = 0.006812 Jy ! Component: 700 - total flux cleaned = 0.00722932 Jy ! Component: 750 - total flux cleaned = 0.00763513 Jy ! Component: 800 - total flux cleaned = 0.00795405 Jy ! Component: 850 - total flux cleaned = 0.00826482 Jy ! Component: 900 - total flux cleaned = 0.00856865 Jy ! Component: 950 - total flux cleaned = 0.00871757 Jy ! Component: 1000 - total flux cleaned = 0.00944423 Jy ! Component: 1050 - total flux cleaned = 0.00979823 Jy ! Component: 1100 - total flux cleaned = 0.010426 Jy ! Component: 1150 - total flux cleaned = 0.0109721 Jy ! Component: 1200 - total flux cleaned = 0.011308 Jy ! Component: 1250 - total flux cleaned = 0.0118355 Jy ! Component: 1300 - total flux cleaned = 0.0122901 Jy ! Component: 1350 - total flux cleaned = 0.0126105 Jy ! Component: 1400 - total flux cleaned = 0.013178 Jy ! Component: 1450 - total flux cleaned = 0.0134272 Jy ! Component: 1500 - total flux cleaned = 0.0137943 Jy ! Component: 1550 - total flux cleaned = 0.0142154 Jy ! Component: 1600 - total flux cleaned = 0.014571 Jy ! Component: 1650 - total flux cleaned = 0.0146886 Jy ! Component: 1700 - total flux cleaned = 0.0150928 Jy ! Component: 1750 - total flux cleaned = 0.0154343 Jy ! Component: 1800 - total flux cleaned = 0.0157143 Jy ! Component: 1850 - total flux cleaned = 0.016211 Jy ! Component: 1900 - total flux cleaned = 0.0164829 Jy ! Component: 1950 - total flux cleaned = 0.0168056 Jy ! Component: 2000 - total flux cleaned = 0.0172822 Jy ! Component: 2050 - total flux cleaned = 0.0175959 Jy ! Component: 2100 - total flux cleaned = 0.0180086 Jy ! Component: 2150 - total flux cleaned = 0.0182125 Jy ! Component: 2200 - total flux cleaned = 0.0186148 Jy ! Component: 2250 - total flux cleaned = 0.0190621 Jy ! Component: 2300 - total flux cleaned = 0.0193567 Jy ! Component: 2350 - total flux cleaned = 0.0197936 Jy ! Component: 2400 - total flux cleaned = 0.0198423 Jy ! Component: 2450 - total flux cleaned = 0.0204116 Jy ! Component: 2500 - total flux cleaned = 0.0206919 Jy ! Component: 2550 - total flux cleaned = 0.021063 Jy ! Component: 2600 - total flux cleaned = 0.0211549 Jy ! Component: 2650 - total flux cleaned = 0.0213826 Jy ! Component: 2700 - total flux cleaned = 0.0216527 Jy ! Component: 2750 - total flux cleaned = 0.0219643 Jy ! Component: 2800 - total flux cleaned = 0.022229 Jy ! Component: 2850 - total flux cleaned = 0.0225337 Jy ! Component: 2900 - total flux cleaned = 0.0228779 Jy ! Component: 2950 - total flux cleaned = 0.0230909 Jy ! Component: 3000 - total flux cleaned = 0.0232599 Jy ! Component: 3050 - total flux cleaned = 0.023427 Jy ! Component: 3100 - total flux cleaned = 0.0239637 Jy ! Component: 3150 - total flux cleaned = 0.0240041 Jy ! Component: 3200 - total flux cleaned = 0.0240446 Jy ! Component: 3250 - total flux cleaned = 0.0243662 Jy ! Component: 3300 - total flux cleaned = 0.0245253 Jy ! Component: 3350 - total flux cleaned = 0.0247222 Jy ! Component: 3400 - total flux cleaned = 0.0250344 Jy ! Component: 3450 - total flux cleaned = 0.025266 Jy ! Component: 3500 - total flux cleaned = 0.0254959 Jy ! Component: 3550 - total flux cleaned = 0.0257998 Jy ! Component: 3600 - total flux cleaned = 0.0258754 Jy ! Component: 3650 - total flux cleaned = 0.0262482 Jy ! Component: 3700 - total flux cleaned = 0.0265437 Jy ! Component: 3750 - total flux cleaned = 0.0266169 Jy ! Component: 3800 - total flux cleaned = 0.0268718 Jy ! Component: 3850 - total flux cleaned = 0.0271597 Jy ! Component: 3900 - total flux cleaned = 0.0273381 Jy ! Component: 3950 - total flux cleaned = 0.0275506 Jy ! Component: 4000 - total flux cleaned = 0.0278318 Jy ! Component: 4050 - total flux cleaned = 0.0279714 Jy ! Total flux subtracted in 4096 components = 0.0281093 Jy ! Clean residual min=-0.002037 max=0.002555 Jy/beam ! Clean residual mean=-0.000009 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.661627 Jy keep ! Adding 428 model components to the UV plane model. ! The established model now contains 663 components and 0.661627 Jy ![Exited script file: muppet] wmap "J0158-1413_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.092 x 7.497 at -3.036 degrees (North through East) ! Clean map min=-0.0063231 max=0.27126 Jy/beam ! Writing clean map to FITS file: J0158-1413_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.271265 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000717147 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.793116 0.793116 1.58623 3.17246 6.34493 12.6899 25.3797 50.7594 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.271 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.092 x 7.497 at -3.036 degrees (North through East) ! Clean map min=-0.0063231 max=0.27126 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0158-1413_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:01:19 2017