! Started logfile: J0154+4743_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:01:09 2017 obs J0154+4743_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0154+4743_S_2015_01_23_pus_uva.fits ! AN table 1: 25 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.504 visibilities/baseline/integration-bin. ! Found source: J0154+4743 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 2268 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0154+4743_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.826883Jy sigma=0.009449 ! Fit after self-cal, rms=0.772849Jy sigma=0.008769 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.685 mas, bmaj=9.926 mas, bpa=-49.13 degrees ! Estimated noise=1883.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.174504 Jy ! Component: 100 - total flux cleaned = 0.219763 Jy ! Total flux subtracted in 100 components = 0.219763 Jy ! Clean residual min=-0.012709 max=0.024726 Jy/beam ! Clean residual mean=0.000058 rms=0.004305 Jy/beam ! Combined flux in latest and established models = 0.219763 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.219763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109732Jy sigma=0.000972 ! Fit after self-cal, rms=0.109732Jy sigma=0.000972 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.666 mas, bmaj=9.838 mas, bpa=-50.24 degrees ! Estimated noise=1479.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (36, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0294796 Jy ! Component: 100 - total flux cleaned = 0.044816 Jy ! Component: 150 - total flux cleaned = 0.0554893 Jy ! Component: 200 - total flux cleaned = 0.0638677 Jy ! Total flux subtracted in 200 components = 0.0638677 Jy ! Clean residual min=-0.009629 max=0.009847 Jy/beam ! Clean residual mean=0.000048 rms=0.002745 Jy/beam ! Combined flux in latest and established models = 0.283631 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 61 components and 0.283631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099838Jy sigma=0.000855 ! Fit after self-cal, rms=0.099579Jy sigma=0.000849 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.01 KP 1.08 ! LA 1.08 MK 1.03 NL 1.00 OV 0.93 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.87 HN 1.07 KP 1.09 ! LA 0.96 MK 1.05 NL 0.98 OV 1.00 ! PT 0.98 SC 1.07 ! ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 1.07 KP 0.87 ! LA 0.81 MK 1.07 NL 1.16 OV 0.90 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* HN 0.96 KP 0.80 ! LA 0.81 MK 1.00 NL 1.02 OV 0.95 ! PT 1.01 SC 1.03 ! ! ! Fit before self-cal, rms=0.099579Jy sigma=0.000849 ! Fit after self-cal, rms=0.137419Jy sigma=0.000769 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.662 mas, bmaj=10 mas, bpa=-50.34 degrees ! Estimated noise=1489.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -20). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0042655 Jy ! Component: 100 - total flux cleaned = 0.00472165 Jy ! Component: 150 - total flux cleaned = 0.00398784 Jy ! Component: 200 - total flux cleaned = 0.00366998 Jy ! Total flux subtracted in 200 components = 0.00366998 Jy ! Clean residual min=-0.003991 max=0.004407 Jy/beam ! Clean residual mean=-0.000017 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.287301 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 85 components and 0.287301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136968Jy sigma=0.000760 ! Fit after self-cal, rms=0.137208Jy sigma=0.000760 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137208Jy sigma=0.000760 ! Fit after self-cal, rms=0.137460Jy sigma=0.000759 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.665 mas, bmaj=10 mas, bpa=-50.32 degrees ! Estimated noise=1486.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000131155 Jy ! Component: 100 - total flux cleaned = -4.88401e-05 Jy ! Component: 150 - total flux cleaned = -0.000209946 Jy ! Component: 200 - total flux cleaned = -0.000283988 Jy ! Total flux subtracted in 200 components = -0.000283988 Jy ! Clean residual min=-0.003890 max=0.004051 Jy/beam ! Clean residual mean=-0.000010 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.287017 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 103 components and 0.287017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137333Jy sigma=0.000757 ! Fit after self-cal, rms=0.137351Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12, -70.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028776 Jy ! Component: 100 - total flux cleaned = 0.00356053 Jy ! Component: 150 - total flux cleaned = 0.00383407 Jy ! Component: 200 - total flux cleaned = 0.00377075 Jy ! Total flux subtracted in 200 components = 0.00377075 Jy ! Clean residual min=-0.003599 max=0.003532 Jy/beam ! Clean residual mean=-0.000004 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.290788 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 126 components and 0.290788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137214Jy sigma=0.000755 ! Fit after self-cal, rms=0.137200Jy sigma=0.000755 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137200Jy sigma=0.000755 ! Fit after self-cal, rms=0.137044Jy sigma=0.000755 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.661 mas, bmaj=9.997 mas, bpa=-50.32 degrees ! Estimated noise=1483.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000504463 Jy ! Component: 100 - total flux cleaned = 0.000621565 Jy ! Component: 150 - total flux cleaned = 0.000511384 Jy ! Component: 200 - total flux cleaned = 0.000458858 Jy ! Total flux subtracted in 200 components = 0.000458858 Jy ! Clean residual min=-0.003433 max=0.003216 Jy/beam ! Clean residual mean=-0.000000 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.291247 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 152 components and 0.291246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136976Jy sigma=0.000754 ! Fit after self-cal, rms=0.136972Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000262595 Jy ! Component: 100 - total flux cleaned = -0.000412077 Jy ! Component: 150 - total flux cleaned = -0.000699805 Jy ! Component: 200 - total flux cleaned = -0.00079088 Jy ! Total flux subtracted in 200 components = -0.00079088 Jy ! Clean residual min=-0.003377 max=0.003118 Jy/beam ! Clean residual mean=0.000001 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.290456 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 164 components and 0.290456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136909Jy sigma=0.000753 ! Fit after self-cal, rms=0.136910Jy sigma=0.000753 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136910Jy sigma=0.000753 ! Fit after self-cal, rms=0.136639Jy sigma=0.000753 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.428 mas, bmaj=10.72 mas, bpa=-58.24 degrees ! Estimated noise=1719.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00065888 Jy ! Component: 100 - total flux cleaned = 0.00079244 Jy ! Component: 150 - total flux cleaned = 0.000720048 Jy ! Component: 200 - total flux cleaned = 0.000508811 Jy ! Total flux subtracted in 200 components = 0.000508811 Jy ! Clean residual min=-0.003385 max=0.003075 Jy/beam ! Clean residual mean=0.000004 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.290965 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 189 components and 0.290965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136594Jy sigma=0.000753 ! Fit after self-cal, rms=0.136574Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.50142e-05 Jy ! Component: 100 - total flux cleaned = -0.000207608 Jy ! Component: 150 - total flux cleaned = -0.000389899 Jy ! Component: 200 - total flux cleaned = -0.000532564 Jy ! Total flux subtracted in 200 components = -0.000532564 Jy ! Clean residual min=-0.003189 max=0.003098 Jy/beam ! Clean residual mean=0.000007 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.290432 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 199 components and 0.290432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136543Jy sigma=0.000753 ! Fit after self-cal, rms=0.136531Jy sigma=0.000753 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.659 mas, bmaj=9.994 mas, bpa=-50.32 degrees ! Estimated noise=1481.92 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.659 x 9.994 at -50.32 degrees (North through East) ! Clean map min=-0.0035762 max=0.21153 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.717 mas, bmaj=9.944 mas, bpa=-49.15 degrees ! Estimated noise=1889.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.174338 Jy ! Component: 100 - total flux cleaned = 0.218519 Jy ! Component: 150 - total flux cleaned = 0.23872 Jy ! Component: 200 - total flux cleaned = 0.250842 Jy ! Total flux subtracted in 200 components = 0.250842 Jy ! Clean residual min=-0.007022 max=0.008817 Jy/beam ! Clean residual mean=0.000018 rms=0.001980 Jy/beam ! Combined flux in latest and established models = 0.250842 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.250842 Jy ! Inverting map and beam ! Estimated beam: bmin=3.659 mas, bmaj=9.994 mas, bpa=-50.32 degrees ! Estimated noise=1481.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109357 Jy ! Component: 100 - total flux cleaned = 0.0185282 Jy ! Component: 150 - total flux cleaned = 0.0232814 Jy ! Component: 200 - total flux cleaned = 0.0253884 Jy ! Total flux subtracted in 200 components = 0.0253884 Jy ! Clean residual min=-0.004399 max=0.004898 Jy/beam ! Clean residual mean=0.000018 rms=0.001232 Jy/beam ! Combined flux in latest and established models = 0.27623 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 60 components and 0.27623 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.428 mas, bmaj=10.72 mas, bpa=-58.24 degrees ! Estimated noise=1719.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00409937 Jy ! Component: 100 - total flux cleaned = 0.00610965 Jy ! Component: 150 - total flux cleaned = 0.00750733 Jy ! Component: 200 - total flux cleaned = 0.00865068 Jy ! Total flux subtracted in 200 components = 0.00865068 Jy ! Clean residual min=-0.004128 max=0.003445 Jy/beam ! Clean residual mean=0.000016 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.284881 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000702798 Jy ! Component: 100 - total flux cleaned = 0.0014516 Jy ! Component: 150 - total flux cleaned = 0.00211021 Jy ! Component: 200 - total flux cleaned = 0.00275221 Jy ! Total flux subtracted in 200 components = 0.00275221 Jy ! Clean residual min=-0.003651 max=0.003098 Jy/beam ! Clean residual mean=0.000009 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.287633 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 142 components and 0.287633 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.659 mas, bmaj=9.994 mas, bpa=-50.32 degrees ! Estimated noise=1481.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00063621 Jy ! Component: 100 - total flux cleaned = -0.000554872 Jy ! Component: 150 - total flux cleaned = -0.00071118 Jy ! Component: 200 - total flux cleaned = -0.000852533 Jy ! Total flux subtracted in 200 components = -0.000852533 Jy ! Clean residual min=-0.003375 max=0.003179 Jy/beam ! Clean residual mean=0.000005 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.28678 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 166 components and 0.286781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136618Jy sigma=0.000755 ! Fit after self-cal, rms=0.136576Jy sigma=0.000754 wmodel J0154+4743_S_2015_01_23_pus_map.mod ! Writing 166 model components to file: J0154+4743_S_2015_01_23_pus_map.mod wobs J0154+4743_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0154+4743_S_2015_01_23_pus_uvs.fits wwins J0154+4743_S_2015_01_23_pus_map.win ! wwins: Wrote 4 windows to J0154+4743_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00055328 Jy ! Component: 100 - total flux cleaned = -0.000556791 Jy ! Component: 150 - total flux cleaned = -0.000554562 Jy ! Component: 200 - total flux cleaned = -0.00064934 Jy ! Component: 250 - total flux cleaned = -0.000693983 Jy ! Component: 300 - total flux cleaned = -0.000518917 Jy ! Component: 350 - total flux cleaned = -0.000306526 Jy ! Component: 400 - total flux cleaned = -0.000100727 Jy ! Component: 450 - total flux cleaned = 9.90504e-05 Jy ! Component: 500 - total flux cleaned = 0.000177664 Jy ! Component: 550 - total flux cleaned = 0.000215738 Jy ! Component: 600 - total flux cleaned = 0.00017928 Jy ! Component: 650 - total flux cleaned = 0.000179671 Jy ! Component: 700 - total flux cleaned = 0.000180198 Jy ! Component: 750 - total flux cleaned = 0.000248586 Jy ! Component: 800 - total flux cleaned = 0.000282031 Jy ! Component: 850 - total flux cleaned = 0.000381246 Jy ! Component: 900 - total flux cleaned = 0.000251476 Jy ! Component: 950 - total flux cleaned = 0.000283477 Jy ! Component: 1000 - total flux cleaned = 0.000220814 Jy ! Component: 1050 - total flux cleaned = 0.000159516 Jy ! Component: 1100 - total flux cleaned = 0.000159543 Jy ! Component: 1150 - total flux cleaned = 6.94995e-05 Jy ! Component: 1200 - total flux cleaned = 1.04833e-05 Jy ! Component: 1250 - total flux cleaned = -7.75007e-05 Jy ! Component: 1300 - total flux cleaned = -0.000135278 Jy ! Component: 1350 - total flux cleaned = -0.000163966 Jy ! Component: 1400 - total flux cleaned = -0.000192093 Jy ! Component: 1450 - total flux cleaned = -0.000164014 Jy ! Component: 1500 - total flux cleaned = -0.000163566 Jy ! Component: 1550 - total flux cleaned = -0.000190651 Jy ! Component: 1600 - total flux cleaned = -0.000163541 Jy ! Component: 1650 - total flux cleaned = -0.000163658 Jy ! Component: 1700 - total flux cleaned = -0.000216559 Jy ! Component: 1750 - total flux cleaned = -0.000190078 Jy ! Component: 1800 - total flux cleaned = -0.000138062 Jy ! Component: 1850 - total flux cleaned = -6.07512e-05 Jy ! Component: 1900 - total flux cleaned = -8.65496e-05 Jy ! Component: 1950 - total flux cleaned = -3.5802e-05 Jy ! Component: 2000 - total flux cleaned = 1.43429e-05 Jy ! Component: 2050 - total flux cleaned = -1.08634e-05 Jy ! Component: 2100 - total flux cleaned = 1.41204e-05 Jy ! Component: 2150 - total flux cleaned = 1.394e-05 Jy ! Component: 2200 - total flux cleaned = -3.47604e-05 Jy ! Component: 2250 - total flux cleaned = 1.38464e-05 Jy ! Component: 2300 - total flux cleaned = 3.77331e-05 Jy ! Component: 2350 - total flux cleaned = -3.40234e-05 Jy ! Component: 2400 - total flux cleaned = 3.73587e-05 Jy ! Component: 2450 - total flux cleaned = 1.36983e-05 Jy ! Component: 2500 - total flux cleaned = -9.98866e-06 Jy ! Component: 2550 - total flux cleaned = -7.99348e-05 Jy ! Component: 2600 - total flux cleaned = -0.000103041 Jy ! Component: 2650 - total flux cleaned = -5.70012e-05 Jy ! Component: 2700 - total flux cleaned = -0.00019422 Jy ! Component: 2750 - total flux cleaned = -0.000148388 Jy ! Component: 2800 - total flux cleaned = -0.0001256 Jy ! Component: 2850 - total flux cleaned = -0.000148204 Jy ! Component: 2900 - total flux cleaned = -0.000170739 Jy ! Component: 2950 - total flux cleaned = -0.000215414 Jy ! Component: 3000 - total flux cleaned = -0.000215396 Jy ! Component: 3050 - total flux cleaned = -0.000237425 Jy ! Component: 3100 - total flux cleaned = -0.000193281 Jy ! Component: 3150 - total flux cleaned = -0.000215345 Jy ! Component: 3200 - total flux cleaned = -0.000215357 Jy ! Component: 3250 - total flux cleaned = -0.000324129 Jy ! Component: 3300 - total flux cleaned = -0.000345765 Jy ! Component: 3350 - total flux cleaned = -0.000367341 Jy ! Component: 3400 - total flux cleaned = -0.000410476 Jy ! Component: 3450 - total flux cleaned = -0.000496429 Jy ! Component: 3500 - total flux cleaned = -0.000517809 Jy ! Component: 3550 - total flux cleaned = -0.000517793 Jy ! Component: 3600 - total flux cleaned = -0.0004966 Jy ! Component: 3650 - total flux cleaned = -0.000581696 Jy ! Component: 3700 - total flux cleaned = -0.000666638 Jy ! Component: 3750 - total flux cleaned = -0.000645356 Jy ! Component: 3800 - total flux cleaned = -0.000687678 Jy ! Component: 3850 - total flux cleaned = -0.000645458 Jy ! Component: 3900 - total flux cleaned = -0.000645541 Jy ! Component: 3950 - total flux cleaned = -0.000687742 Jy ! Component: 4000 - total flux cleaned = -0.000708777 Jy ! Component: 4050 - total flux cleaned = -0.000729764 Jy ! Total flux subtracted in 4096 components = -0.000771664 Jy ! Clean residual min=-0.001307 max=0.001311 Jy/beam ! Clean residual mean=-0.000001 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.286009 Jy keep ! Adding 255 model components to the UV plane model. ! The established model now contains 421 components and 0.286009 Jy ![Exited script file: muppet] wmap "J0154+4743_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.659 x 9.994 at -50.32 degrees (North through East) ! Clean map min=-0.0035598 max=0.21896 Jy/beam ! Writing clean map to FITS file: J0154+4743_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.218963 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000372637 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.510548 0.510548 1.0211 2.04219 4.08439 8.16877 16.3375 32.6751 65.3502 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.218 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.659 x 9.994 at -50.32 degrees (North through East) ! Clean map min=-0.0035598 max=0.21896 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0154+4743_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:01:13 2017