! Started logfile: J0153+7115_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:17:32 2016 obs J0153+7115_S_2014_12_20_pus_uva.fits ! Reading UV FITS file: J0153+7115_S_2014_12_20_pus_uva.fits ! AN table 1: 103 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.980151 visibilities/baseline/integration-bin. ! Found source: J0153+7115 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 18172 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0153+7115_S_2014_12_20_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.885741Jy sigma=0.010223 ! Fit after self-cal, rms=0.824035Jy sigma=0.009530 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.97 mas, bmaj=4.159 mas, bpa=71.61 degrees ! Estimated noise=821.255 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.132352 Jy ! Component: 100 - total flux cleaned = 0.171854 Jy ! Total flux subtracted in 100 components = 0.171854 Jy ! Clean residual min=-0.006514 max=0.015730 Jy/beam ! Clean residual mean=-0.000015 rms=0.002037 Jy/beam ! Combined flux in latest and established models = 0.171854 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.171854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086902Jy sigma=0.000932 ! Fit after self-cal, rms=0.086816Jy sigma=0.000931 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0176918 Jy ! Component: 100 - total flux cleaned = 0.0274179 Jy ! Total flux subtracted in 100 components = 0.0274179 Jy ! Clean residual min=-0.005888 max=0.010375 Jy/beam ! Clean residual mean=-0.000007 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 0.199272 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 19 components and 0.199272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081411Jy sigma=0.000877 ! Fit after self-cal, rms=0.081344Jy sigma=0.000876 ! Inverting map ! Added new window around map position (-12, 5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100364 Jy ! Component: 100 - total flux cleaned = 0.0163467 Jy ! Total flux subtracted in 100 components = 0.0163467 Jy ! Clean residual min=-0.005786 max=0.005969 Jy/beam ! Clean residual mean=-0.000002 rms=0.001345 Jy/beam ! Combined flux in latest and established models = 0.215619 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 0.215619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079374Jy sigma=0.000855 ! Fit after self-cal, rms=0.079300Jy sigma=0.000854 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.676 mas, bmaj=5.053 mas, bpa=69.05 degrees ! Estimated noise=462.195 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00870737 Jy ! Component: 100 - total flux cleaned = 0.0144943 Jy ! Component: 150 - total flux cleaned = 0.0187175 Jy ! Component: 200 - total flux cleaned = 0.0218739 Jy ! Total flux subtracted in 200 components = 0.0218739 Jy ! Clean residual min=-0.005484 max=0.007106 Jy/beam ! Clean residual mean=-0.000028 rms=0.001511 Jy/beam ! Combined flux in latest and established models = 0.237492 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 57 components and 0.237492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077982Jy sigma=0.000841 ! Fit after self-cal, rms=0.077894Jy sigma=0.000840 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.90 HN 0.97 KP 1.08 ! LA 0.93 MK 0.99 NL 1.01 OV 0.96 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.05 HN 1.00 KP 1.03 ! LA 0.91 MK 0.98 NL 1.25 OV 1.00 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.17 HN 1.02 KP 0.93 ! LA 0.73 MK 1.02 NL 1.35 OV 0.92 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.04 HN 0.97 KP 0.90 ! LA 0.79 MK 0.99 NL 1.03 OV 0.99 ! PT 1.03 SC 0.97 ! ! ! Fit before self-cal, rms=0.077894Jy sigma=0.000840 ! Fit after self-cal, rms=0.071675Jy sigma=0.000789 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.687 mas, bmaj=5.062 mas, bpa=68.85 degrees ! Estimated noise=459.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-21, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00330471 Jy ! Component: 100 - total flux cleaned = 0.00359673 Jy ! Component: 150 - total flux cleaned = 0.00359099 Jy ! Component: 200 - total flux cleaned = 0.00353151 Jy ! Total flux subtracted in 200 components = 0.00353151 Jy ! Clean residual min=-0.002949 max=0.002442 Jy/beam ! Clean residual mean=0.000017 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.241024 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 85 components and 0.241024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071446Jy sigma=0.000786 ! Fit after self-cal, rms=0.071426Jy sigma=0.000785 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071426Jy sigma=0.000785 ! Fit after self-cal, rms=0.070775Jy sigma=0.000781 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.688 mas, bmaj=5.06 mas, bpa=69.05 degrees ! Estimated noise=458.281 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000657907 Jy ! Component: 100 - total flux cleaned = 0.000885312 Jy ! Component: 150 - total flux cleaned = 0.00104445 Jy ! Component: 200 - total flux cleaned = 0.00111652 Jy ! Total flux subtracted in 200 components = 0.00111652 Jy ! Clean residual min=-0.002727 max=0.001997 Jy/beam ! Clean residual mean=0.000014 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.242141 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 103 components and 0.242141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070727Jy sigma=0.000780 ! Fit after self-cal, rms=0.070725Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000312214 Jy ! Component: 100 - total flux cleaned = 0.000373995 Jy ! Component: 150 - total flux cleaned = 0.000430894 Jy ! Component: 200 - total flux cleaned = 0.000483312 Jy ! Total flux subtracted in 200 components = 0.000483312 Jy ! Clean residual min=-0.002662 max=0.001890 Jy/beam ! Clean residual mean=0.000013 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.242624 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 112 components and 0.242624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070703Jy sigma=0.000780 ! Fit after self-cal, rms=0.070701Jy sigma=0.000780 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070701Jy sigma=0.000780 ! Fit after self-cal, rms=0.070728Jy sigma=0.000780 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=5.057 mas, bpa=69.03 degrees ! Estimated noise=458.313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000326502 Jy ! Component: 100 - total flux cleaned = 0.000458007 Jy ! Component: 150 - total flux cleaned = 0.000504662 Jy ! Component: 200 - total flux cleaned = 0.000548329 Jy ! Total flux subtracted in 200 components = 0.000548329 Jy ! Clean residual min=-0.002633 max=0.001868 Jy/beam ! Clean residual mean=0.000013 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.243172 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 120 components and 0.243172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070713Jy sigma=0.000779 ! Fit after self-cal, rms=0.070712Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000141643 Jy ! Component: 100 - total flux cleaned = 0.000203738 Jy ! Component: 150 - total flux cleaned = 0.000242333 Jy ! Component: 200 - total flux cleaned = 0.000242194 Jy ! Total flux subtracted in 200 components = 0.000242194 Jy ! Clean residual min=-0.002592 max=0.001858 Jy/beam ! Clean residual mean=0.000013 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.243414 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 125 components and 0.243414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070703Jy sigma=0.000779 ! Fit after self-cal, rms=0.070702Jy sigma=0.000779 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070702Jy sigma=0.000779 ! Fit after self-cal, rms=0.070707Jy sigma=0.000779 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.864 mas, bmaj=10.01 mas, bpa=64.15 degrees ! Estimated noise=571.782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000895947 Jy ! Component: 100 - total flux cleaned = 0.0010063 Jy ! Component: 150 - total flux cleaned = 0.00102747 Jy ! Component: 200 - total flux cleaned = 0.00104523 Jy ! Total flux subtracted in 200 components = 0.00104523 Jy ! Clean residual min=-0.003178 max=0.002642 Jy/beam ! Clean residual mean=0.000028 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.24446 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 133 components and 0.24446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070704Jy sigma=0.000779 ! Fit after self-cal, rms=0.070703Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.20114e-05 Jy ! Component: 100 - total flux cleaned = 0.000118208 Jy ! Component: 150 - total flux cleaned = 0.000119763 Jy ! Component: 200 - total flux cleaned = 0.000133807 Jy ! Total flux subtracted in 200 components = 0.000133807 Jy ! Clean residual min=-0.003116 max=0.002608 Jy/beam ! Clean residual mean=0.000027 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.244593 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 138 components and 0.244593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070704Jy sigma=0.000779 ! Fit after self-cal, rms=0.070703Jy sigma=0.000779 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.685 mas, bmaj=5.055 mas, bpa=68.95 degrees ! Estimated noise=458.248 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.685 x 5.055 at 68.95 degrees (North through East) ! Clean map min=-0.002398 max=0.16957 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.977 mas, bmaj=4.17 mas, bpa=71.36 degrees ! Estimated noise=812.292 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130838 Jy ! Component: 100 - total flux cleaned = 0.171479 Jy ! Component: 150 - total flux cleaned = 0.189746 Jy ! Component: 200 - total flux cleaned = 0.201158 Jy ! Total flux subtracted in 200 components = 0.201158 Jy ! Clean residual min=-0.003621 max=0.007224 Jy/beam ! Clean residual mean=-0.000004 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.201158 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.201158 Jy ! Inverting map and beam ! Estimated beam: bmin=3.685 mas, bmaj=5.055 mas, bpa=68.95 degrees ! Estimated noise=458.248 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118574 Jy ! Component: 100 - total flux cleaned = 0.0197065 Jy ! Component: 150 - total flux cleaned = 0.0253192 Jy ! Component: 200 - total flux cleaned = 0.0293872 Jy ! Total flux subtracted in 200 components = 0.0293872 Jy ! Clean residual min=-0.002706 max=0.002402 Jy/beam ! Clean residual mean=-0.000005 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.230545 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 60 components and 0.230545 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.864 mas, bmaj=10.01 mas, bpa=64.15 degrees ! Estimated noise=571.782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00499133 Jy ! Component: 100 - total flux cleaned = 0.00782669 Jy ! Component: 150 - total flux cleaned = 0.00974449 Jy ! Component: 200 - total flux cleaned = 0.0111028 Jy ! Total flux subtracted in 200 components = 0.0111028 Jy ! Clean residual min=-0.003120 max=0.002499 Jy/beam ! Clean residual mean=0.000019 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.241648 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000969179 Jy ! Component: 100 - total flux cleaned = 0.00161808 Jy ! Component: 150 - total flux cleaned = 0.001881 Jy ! Component: 200 - total flux cleaned = 0.00209675 Jy ! Total flux subtracted in 200 components = 0.00209675 Jy ! Clean residual min=-0.003001 max=0.002571 Jy/beam ! Clean residual mean=0.000023 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.243744 Jy ! Adding 100 model components to the UV plane model. ! The established model now contains 151 components and 0.243744 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.685 mas, bmaj=5.055 mas, bpa=68.95 degrees ! Estimated noise=458.248 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000166008 Jy ! Component: 100 - total flux cleaned = -8.68096e-06 Jy ! Component: 150 - total flux cleaned = 7.1442e-05 Jy ! Component: 200 - total flux cleaned = 7.12534e-05 Jy ! Total flux subtracted in 200 components = 7.12534e-05 Jy ! Clean residual min=-0.002372 max=0.001880 Jy/beam ! Clean residual mean=0.000012 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.243816 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 172 components and 0.243815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070654Jy sigma=0.000779 ! Fit after self-cal, rms=0.070638Jy sigma=0.000779 wmodel J0153+7115_S_2014_12_20_pus_map.mod ! Writing 172 model components to file: J0153+7115_S_2014_12_20_pus_map.mod wobs J0153+7115_S_2014_12_20_pus_uvs.fits ! Writing UV FITS file: J0153+7115_S_2014_12_20_pus_uvs.fits wwins J0153+7115_S_2014_12_20_pus_map.win ! wwins: Wrote 4 windows to J0153+7115_S_2014_12_20_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000496792 Jy ! Component: 100 - total flux cleaned = -0.000309823 Jy ! Component: 150 - total flux cleaned = -0.000161028 Jy ! Component: 200 - total flux cleaned = -7.64692e-05 Jy ! Component: 250 - total flux cleaned = -2.33713e-05 Jy ! Component: 300 - total flux cleaned = 2.24572e-06 Jy ! Component: 350 - total flux cleaned = 2.72255e-05 Jy ! Component: 400 - total flux cleaned = -4.63736e-05 Jy ! Component: 450 - total flux cleaned = -0.000164941 Jy ! Component: 500 - total flux cleaned = -0.000210551 Jy ! Component: 550 - total flux cleaned = -0.000321755 Jy ! Component: 600 - total flux cleaned = -0.000365584 Jy ! Component: 650 - total flux cleaned = -0.000451527 Jy ! Component: 700 - total flux cleaned = -0.00055575 Jy ! Component: 750 - total flux cleaned = -0.000616772 Jy ! Component: 800 - total flux cleaned = -0.000596746 Jy ! Component: 850 - total flux cleaned = -0.000616837 Jy ! Component: 900 - total flux cleaned = -0.00071276 Jy ! Component: 950 - total flux cleaned = -0.000731045 Jy ! Component: 1000 - total flux cleaned = -0.000804745 Jy ! Component: 1050 - total flux cleaned = -0.000804816 Jy ! Component: 1100 - total flux cleaned = -0.000840666 Jy ! Component: 1150 - total flux cleaned = -0.000893593 Jy ! Component: 1200 - total flux cleaned = -0.000945629 Jy ! Component: 1250 - total flux cleaned = -0.000979683 Jy ! Component: 1300 - total flux cleaned = -0.000962814 Jy ! Component: 1350 - total flux cleaned = -0.00101232 Jy ! Component: 1400 - total flux cleaned = -0.00101225 Jy ! Component: 1450 - total flux cleaned = -0.00101202 Jy ! Component: 1500 - total flux cleaned = -0.00102781 Jy ! Component: 1550 - total flux cleaned = -0.00109042 Jy ! Component: 1600 - total flux cleaned = -0.00110592 Jy ! Component: 1650 - total flux cleaned = -0.00115147 Jy ! Component: 1700 - total flux cleaned = -0.00115197 Jy ! Component: 1750 - total flux cleaned = -0.0012113 Jy ! Component: 1800 - total flux cleaned = -0.00129868 Jy ! Component: 1850 - total flux cleaned = -0.00134161 Jy ! Component: 1900 - total flux cleaned = -0.00142663 Jy ! Component: 1950 - total flux cleaned = -0.00144067 Jy ! Component: 2000 - total flux cleaned = -0.00155139 Jy ! Component: 2050 - total flux cleaned = -0.00160617 Jy ! Component: 2100 - total flux cleaned = -0.00171402 Jy ! Component: 2150 - total flux cleaned = -0.00171411 Jy ! Component: 2200 - total flux cleaned = -0.00178033 Jy ! Component: 2250 - total flux cleaned = -0.0018329 Jy ! Component: 2300 - total flux cleaned = -0.00193666 Jy ! Component: 2350 - total flux cleaned = -0.00202617 Jy ! Component: 2400 - total flux cleaned = -0.00210213 Jy ! Component: 2450 - total flux cleaned = -0.00216479 Jy ! Component: 2500 - total flux cleaned = -0.0022393 Jy ! Component: 2550 - total flux cleaned = -0.00234982 Jy ! Component: 2600 - total flux cleaned = -0.00243489 Jy ! Component: 2650 - total flux cleaned = -0.00248335 Jy ! Component: 2700 - total flux cleaned = -0.00253137 Jy ! Component: 2750 - total flux cleaned = -0.00264976 Jy ! Component: 2800 - total flux cleaned = -0.00270843 Jy ! Component: 2850 - total flux cleaned = -0.00277816 Jy ! Component: 2900 - total flux cleaned = -0.0028704 Jy ! Component: 2950 - total flux cleaned = -0.00291601 Jy ! Component: 3000 - total flux cleaned = -0.00297244 Jy ! Component: 3050 - total flux cleaned = -0.0029837 Jy ! Component: 3100 - total flux cleaned = -0.00307266 Jy ! Component: 3150 - total flux cleaned = -0.00309467 Jy ! Component: 3200 - total flux cleaned = -0.00313854 Jy ! Component: 3250 - total flux cleaned = -0.00314936 Jy ! Component: 3300 - total flux cleaned = -0.00321402 Jy ! Component: 3350 - total flux cleaned = -0.00324592 Jy ! Component: 3400 - total flux cleaned = -0.00329892 Jy ! Component: 3450 - total flux cleaned = -0.0033095 Jy ! Component: 3500 - total flux cleaned = -0.00335127 Jy ! Component: 3550 - total flux cleaned = -0.00341349 Jy ! Component: 3600 - total flux cleaned = -0.00340335 Jy ! Component: 3650 - total flux cleaned = -0.00345428 Jy ! Component: 3700 - total flux cleaned = -0.00347458 Jy ! Component: 3750 - total flux cleaned = -0.00348478 Jy ! Component: 3800 - total flux cleaned = -0.00352478 Jy ! Component: 3850 - total flux cleaned = -0.00355463 Jy ! Component: 3900 - total flux cleaned = -0.00355464 Jy ! Component: 3950 - total flux cleaned = -0.00363299 Jy ! Component: 4000 - total flux cleaned = -0.0036524 Jy ! Component: 4050 - total flux cleaned = -0.00366201 Jy ! Total flux subtracted in 4096 components = -0.00370994 Jy ! Clean residual min=-0.000580 max=0.000594 Jy/beam ! Clean residual mean=-0.000001 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.240106 Jy keep ! Adding 325 model components to the UV plane model. ! The established model now contains 497 components and 0.240105 Jy ![Exited script file: muppet] wmap "J0153+7115_S_2014_12_20_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.685 x 5.055 at 68.95 degrees (North through East) ! Clean map min=-0.00144 max=0.16872 Jy/beam ! Writing clean map to FITS file: J0153+7115_S_2014_12_20_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.168719 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000172612 device "J0153+7115_S_2014_12_20_pus\_map.eps/VPS" ! Attempting to open device: 'J0153+7115_S_2014_12_20_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.306923 0.306923 0.613847 1.22769 2.45539 4.91077 9.82155 19.6431 39.2862 78.5724 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.168 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.685 x 5.055 at 68.95 degrees (North through East) ! Clean map min=-0.00144 max=0.16872 Jy/beam quit ! Quitting program ! Log file J0153+7115_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:17:40 2016