! Started logfile: J0145+5810_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:00:46 2017 obs J0145+5810_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0145+5810_S_2015_01_23_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.791001 visibilities/baseline/integration-bin. ! Found source: J0145+5810 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 17228 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0145+5810_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 137 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 137 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 137 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 137 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.969357Jy sigma=0.011131 ! Fit after self-cal, rms=0.941191Jy sigma=0.010848 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.188 mas, bmaj=5.497 mas, bpa=49.96 degrees ! Estimated noise=820.497 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0403937 Jy ! Component: 100 - total flux cleaned = 0.0584633 Jy ! Total flux subtracted in 100 components = 0.0584633 Jy ! Clean residual min=-0.008427 max=0.012805 Jy/beam ! Clean residual mean=-0.000059 rms=0.002646 Jy/beam ! Combined flux in latest and established models = 0.0584633 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0584633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107219Jy sigma=0.001040 ! Fit after self-cal, rms=0.106549Jy sigma=0.001032 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.05 mas, bmaj=6.055 mas, bpa=48.11 degrees ! Estimated noise=485.968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.024963 Jy ! Component: 100 - total flux cleaned = 0.0414879 Jy ! Component: 150 - total flux cleaned = 0.0531854 Jy ! Component: 200 - total flux cleaned = 0.061692 Jy ! Total flux subtracted in 200 components = 0.061692 Jy ! Clean residual min=-0.010489 max=0.015630 Jy/beam ! Clean residual mean=-0.000207 rms=0.003580 Jy/beam ! Combined flux in latest and established models = 0.120155 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 68 components and 0.120155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099733Jy sigma=0.000935 ! Fit after self-cal, rms=0.099104Jy sigma=0.000929 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.34 FD 2.99 HN 1.02 KP 0.82 ! LA 0.75 MK 1.17 NL 1.13 OV 0.89 ! PT 0.69 SC 1.10 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.40 FD 3.26 HN 1.00 KP 0.80 ! LA 0.74 MK 1.18 NL 1.17 OV 0.94 ! PT 0.66 SC 1.17 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 3.57 HN 1.06 KP 0.69 ! LA 0.59 MK 1.45 NL 1.33 OV 0.88 ! PT 0.68 SC 1.17 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.56 FD 3.76 HN 0.99 KP 0.65 ! LA 0.63 MK 1.05 NL 1.17 OV 0.94 ! PT 0.74 SC 1.10 ! ! ! Fit before self-cal, rms=0.099104Jy sigma=0.000929 ! Fit after self-cal, rms=0.233214Jy sigma=0.000808 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.204 mas, bmaj=6.246 mas, bpa=46.83 degrees ! Estimated noise=498.689 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00601491 Jy ! Component: 100 - total flux cleaned = 0.007155 Jy ! Component: 150 - total flux cleaned = 0.00728808 Jy ! Component: 200 - total flux cleaned = 0.00718019 Jy ! Total flux subtracted in 200 components = 0.00718019 Jy ! Clean residual min=-0.004984 max=0.005594 Jy/beam ! Clean residual mean=-0.000032 rms=0.001378 Jy/beam ! Combined flux in latest and established models = 0.127335 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 98 components and 0.127335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232938Jy sigma=0.000796 ! Fit after self-cal, rms=0.234007Jy sigma=0.000787 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234007Jy sigma=0.000787 ! Fit after self-cal, rms=0.161236Jy sigma=0.000780 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.271 mas, bmaj=6.061 mas, bpa=47.93 degrees ! Estimated noise=496.317 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00265052 Jy ! Component: 100 - total flux cleaned = 0.00286925 Jy ! Component: 150 - total flux cleaned = 0.00306195 Jy ! Component: 200 - total flux cleaned = 0.00306337 Jy ! Total flux subtracted in 200 components = 0.00306337 Jy ! Clean residual min=-0.003686 max=0.004375 Jy/beam ! Clean residual mean=-0.000005 rms=0.001006 Jy/beam ! Combined flux in latest and established models = 0.130399 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 107 components and 0.130399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161094Jy sigma=0.000775 ! Fit after self-cal, rms=0.161145Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000988489 Jy ! Component: 100 - total flux cleaned = 0.000827842 Jy ! Component: 150 - total flux cleaned = 0.000565241 Jy ! Component: 200 - total flux cleaned = 0.000389866 Jy ! Total flux subtracted in 200 components = 0.000389866 Jy ! Clean residual min=-0.003460 max=0.003949 Jy/beam ! Clean residual mean=-0.000004 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.130789 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 115 components and 0.130789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161073Jy sigma=0.000772 ! Fit after self-cal, rms=0.161063Jy sigma=0.000771 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161063Jy sigma=0.000771 ! Fit after self-cal, rms=0.159447Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.311 mas, bmaj=6.043 mas, bpa=48.29 degrees ! Estimated noise=484.594 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133372 Jy ! Component: 100 - total flux cleaned = 0.00154963 Jy ! Component: 150 - total flux cleaned = 0.00173133 Jy ! Component: 200 - total flux cleaned = 0.00178354 Jy ! Total flux subtracted in 200 components = 0.00178354 Jy ! Clean residual min=-0.003067 max=0.003040 Jy/beam ! Clean residual mean=-0.000007 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.132572 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 122 components and 0.132572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159388Jy sigma=0.000767 ! Fit after self-cal, rms=0.159361Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000407269 Jy ! Component: 100 - total flux cleaned = 0.000357977 Jy ! Component: 150 - total flux cleaned = 0.000273254 Jy ! Component: 200 - total flux cleaned = 0.000159824 Jy ! Total flux subtracted in 200 components = 0.000159824 Jy ! Clean residual min=-0.002882 max=0.002949 Jy/beam ! Clean residual mean=-0.000007 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.132732 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 128 components and 0.132732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159338Jy sigma=0.000766 ! Fit after self-cal, rms=0.159332Jy sigma=0.000766 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159332Jy sigma=0.000766 ! Fit after self-cal, rms=0.158182Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.097 mas, bmaj=8.668 mas, bpa=62.08 degrees ! Estimated noise=546.607 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000839915 Jy ! Component: 100 - total flux cleaned = 0.000979821 Jy ! Component: 150 - total flux cleaned = 0.00109264 Jy ! Component: 200 - total flux cleaned = 0.00118336 Jy ! Total flux subtracted in 200 components = 0.00118336 Jy ! Clean residual min=-0.003757 max=0.003556 Jy/beam ! Clean residual mean=-0.000014 rms=0.001044 Jy/beam ! Combined flux in latest and established models = 0.133915 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 134 components and 0.133915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158168Jy sigma=0.000764 ! Fit after self-cal, rms=0.158166Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.81726e-06 Jy ! Component: 100 - total flux cleaned = 8.01398e-05 Jy ! Component: 150 - total flux cleaned = 0.000103497 Jy ! Component: 200 - total flux cleaned = 0.000142417 Jy ! Total flux subtracted in 200 components = 0.000142417 Jy ! Clean residual min=-0.003632 max=0.003446 Jy/beam ! Clean residual mean=-0.000013 rms=0.001031 Jy/beam ! Combined flux in latest and established models = 0.134058 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 139 components and 0.134058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158164Jy sigma=0.000764 ! Fit after self-cal, rms=0.158169Jy sigma=0.000764 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.318 mas, bmaj=6.046 mas, bpa=48.53 degrees ! Estimated noise=475.147 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.318 x 6.046 at 48.53 degrees (North through East) ! Clean map min=-0.0042099 max=0.048242 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.405 mas, bmaj=5.387 mas, bpa=50.44 degrees ! Estimated noise=826.344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0386878 Jy ! Component: 100 - total flux cleaned = 0.0615091 Jy ! Component: 150 - total flux cleaned = 0.078213 Jy ! Component: 200 - total flux cleaned = 0.0907964 Jy ! Total flux subtracted in 200 components = 0.0907964 Jy ! Clean residual min=-0.005468 max=0.007865 Jy/beam ! Clean residual mean=-0.000024 rms=0.001561 Jy/beam ! Combined flux in latest and established models = 0.0907964 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.0907964 Jy ! Inverting map and beam ! Estimated beam: bmin=4.318 mas, bmaj=6.046 mas, bpa=48.53 degrees ! Estimated noise=475.147 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154885 Jy ! Component: 100 - total flux cleaned = 0.0257372 Jy ! Component: 150 - total flux cleaned = 0.0329234 Jy ! Component: 200 - total flux cleaned = 0.0363042 Jy ! Total flux subtracted in 200 components = 0.0363042 Jy ! Clean residual min=-0.003785 max=0.004242 Jy/beam ! Clean residual mean=-0.000024 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.127101 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 79 components and 0.127101 Jy ! Inverting map ! Added new window around map position (-2.5, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261947 Jy ! Component: 100 - total flux cleaned = 0.00407529 Jy ! Component: 150 - total flux cleaned = 0.00492325 Jy ! Component: 200 - total flux cleaned = 0.00536001 Jy ! Total flux subtracted in 200 components = 0.00536001 Jy ! Clean residual min=-0.002842 max=0.002548 Jy/beam ! Clean residual mean=-0.000010 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.132461 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 109 components and 0.132461 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.097 mas, bmaj=8.668 mas, bpa=62.08 degrees ! Estimated noise=546.607 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000757006 Jy ! Component: 100 - total flux cleaned = 0.000909275 Jy ! Component: 150 - total flux cleaned = 0.00102746 Jy ! Component: 200 - total flux cleaned = 0.00108074 Jy ! Total flux subtracted in 200 components = 0.00108074 Jy ! Clean residual min=-0.003742 max=0.003468 Jy/beam ! Clean residual mean=-0.000015 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.133541 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.68022e-05 Jy ! Component: 100 - total flux cleaned = 0.000166689 Jy ! Component: 150 - total flux cleaned = 0.000273121 Jy ! Component: 200 - total flux cleaned = 0.000367997 Jy ! Total flux subtracted in 200 components = 0.000367997 Jy ! Clean residual min=-0.003649 max=0.003355 Jy/beam ! Clean residual mean=-0.000013 rms=0.001004 Jy/beam ! Combined flux in latest and established models = 0.133909 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 167 components and 0.133909 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.318 mas, bmaj=6.046 mas, bpa=48.53 degrees ! Estimated noise=475.147 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114536 Jy ! Component: 100 - total flux cleaned = -7.2959e-05 Jy ! Component: 150 - total flux cleaned = -0.000106029 Jy ! Component: 200 - total flux cleaned = -7.5311e-05 Jy ! Total flux subtracted in 200 components = -7.5311e-05 Jy ! Clean residual min=-0.002548 max=0.002636 Jy/beam ! Clean residual mean=-0.000007 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.133834 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 184 components and 0.133834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158128Jy sigma=0.000763 ! Fit after self-cal, rms=0.158043Jy sigma=0.000762 wmodel J0145+5810_S_2015_01_23_pus_map.mod ! Writing 184 model components to file: J0145+5810_S_2015_01_23_pus_map.mod wobs J0145+5810_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0145+5810_S_2015_01_23_pus_uvs.fits wwins J0145+5810_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J0145+5810_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000387815 Jy ! Component: 100 - total flux cleaned = -0.000268846 Jy ! Component: 150 - total flux cleaned = -0.000158854 Jy ! Component: 200 - total flux cleaned = -5.39148e-05 Jy ! Component: 250 - total flux cleaned = 4.50776e-05 Jy ! Component: 300 - total flux cleaned = 7.65755e-05 Jy ! Component: 350 - total flux cleaned = 1.59053e-05 Jy ! Component: 400 - total flux cleaned = 1.61412e-05 Jy ! Component: 450 - total flux cleaned = 1.57158e-05 Jy ! Component: 500 - total flux cleaned = 4.1905e-05 Jy ! Component: 550 - total flux cleaned = 4.06137e-05 Jy ! Component: 600 - total flux cleaned = 6.59273e-05 Jy ! Component: 650 - total flux cleaned = 9.14201e-05 Jy ! Component: 700 - total flux cleaned = 0.000116059 Jy ! Component: 750 - total flux cleaned = 0.000186962 Jy ! Component: 800 - total flux cleaned = 0.000163953 Jy ! Component: 850 - total flux cleaned = 0.000231391 Jy ! Component: 900 - total flux cleaned = 0.000340812 Jy ! Component: 950 - total flux cleaned = 0.000340237 Jy ! Component: 1000 - total flux cleaned = 0.00031914 Jy ! Component: 1050 - total flux cleaned = 0.000319231 Jy ! Component: 1100 - total flux cleaned = 0.00027884 Jy ! Component: 1150 - total flux cleaned = 0.000259332 Jy ! Component: 1200 - total flux cleaned = 0.000239843 Jy ! Component: 1250 - total flux cleaned = 0.000201213 Jy ! Component: 1300 - total flux cleaned = 0.000163407 Jy ! Component: 1350 - total flux cleaned = 7.10711e-05 Jy ! Component: 1400 - total flux cleaned = 8.91917e-05 Jy ! Component: 1450 - total flux cleaned = 8.88093e-05 Jy ! Component: 1500 - total flux cleaned = 5.35368e-05 Jy ! Component: 1550 - total flux cleaned = 3.59725e-05 Jy ! Component: 1600 - total flux cleaned = 5.29466e-05 Jy ! Component: 1650 - total flux cleaned = 3.63397e-05 Jy ! Component: 1700 - total flux cleaned = 6.93489e-05 Jy ! Component: 1750 - total flux cleaned = 0.000117536 Jy ! Component: 1800 - total flux cleaned = 6.94868e-05 Jy ! Component: 1850 - total flux cleaned = 6.95283e-05 Jy ! Component: 1900 - total flux cleaned = 8.50811e-05 Jy ! Component: 1950 - total flux cleaned = 0.000130826 Jy ! Component: 2000 - total flux cleaned = 8.51737e-05 Jy ! Component: 2050 - total flux cleaned = 4.07503e-05 Jy ! Component: 2100 - total flux cleaned = 1.17856e-05 Jy ! Component: 2150 - total flux cleaned = 2.60202e-05 Jy ! Component: 2200 - total flux cleaned = -2.88542e-06 Jy ! Component: 2250 - total flux cleaned = -1.70624e-05 Jy ! Component: 2300 - total flux cleaned = -4.525e-05 Jy ! Component: 2350 - total flux cleaned = -7.29034e-05 Jy ! Component: 2400 - total flux cleaned = -0.000154925 Jy ! Component: 2450 - total flux cleaned = -0.000141317 Jy ! Component: 2500 - total flux cleaned = -0.000181546 Jy ! Component: 2550 - total flux cleaned = -0.000181671 Jy ! Component: 2600 - total flux cleaned = -0.000208058 Jy ! Component: 2650 - total flux cleaned = -0.000259925 Jy ! Component: 2700 - total flux cleaned = -0.000233952 Jy ! Component: 2750 - total flux cleaned = -0.000259209 Jy ! Component: 2800 - total flux cleaned = -0.000284413 Jy ! Component: 2850 - total flux cleaned = -0.000284632 Jy ! Component: 2900 - total flux cleaned = -0.000359124 Jy ! Component: 2950 - total flux cleaned = -0.000347049 Jy ! Component: 3000 - total flux cleaned = -0.000407821 Jy ! Component: 3050 - total flux cleaned = -0.000456056 Jy ! Component: 3100 - total flux cleaned = -0.000444068 Jy ! Component: 3150 - total flux cleaned = -0.00049135 Jy ! Component: 3200 - total flux cleaned = -0.000479612 Jy ! Component: 3250 - total flux cleaned = -0.000491241 Jy ! Component: 3300 - total flux cleaned = -0.000537374 Jy ! Component: 3350 - total flux cleaned = -0.000571698 Jy ! Component: 3400 - total flux cleaned = -0.000571546 Jy ! Component: 3450 - total flux cleaned = -0.000549217 Jy ! Component: 3500 - total flux cleaned = -0.000571652 Jy ! Component: 3550 - total flux cleaned = -0.00063811 Jy ! Component: 3600 - total flux cleaned = -0.000616112 Jy ! Component: 3650 - total flux cleaned = -0.000637998 Jy ! Component: 3700 - total flux cleaned = -0.000659632 Jy ! Component: 3750 - total flux cleaned = -0.00067052 Jy ! Component: 3800 - total flux cleaned = -0.000702436 Jy ! Component: 3850 - total flux cleaned = -0.00074485 Jy ! Component: 3900 - total flux cleaned = -0.000660545 Jy ! Component: 3950 - total flux cleaned = -0.00069204 Jy ! Component: 4000 - total flux cleaned = -0.000723272 Jy ! Component: 4050 - total flux cleaned = -0.000702664 Jy ! Total flux subtracted in 4096 components = -0.000723194 Jy ! Clean residual min=-0.000551 max=0.000560 Jy/beam ! Clean residual mean=-0.000001 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.133111 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 488 components and 0.133111 Jy ![Exited script file: muppet] wmap "J0145+5810_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.318 x 6.046 at 48.53 degrees (North through East) ! Clean map min=-0.0041598 max=0.048118 Jy/beam ! Writing clean map to FITS file: J0145+5810_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0481178 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00018347 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.14388 1.14388 2.28777 4.57553 9.15106 18.3021 36.6042 73.2085 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.048 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.318 x 6.046 at 48.53 degrees (North through East) ! Clean map min=-0.0041598 max=0.048118 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0145+5810_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:00:52 2017