! Started logfile: J0144+2705_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:41:06 2016 obs J0144+2705_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J0144+2705_S_2014_06_09_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.61384 visibilities/baseline/integration-bin. ! Found source: J0144+2705 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 12596 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0144+2705_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.875954Jy sigma=0.010794 ! Fit after self-cal, rms=0.809426Jy sigma=0.010088 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.941 mas, bmaj=7.445 mas, bpa=11.78 degrees ! Estimated noise=1072.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.145732 Jy ! Component: 100 - total flux cleaned = 0.181969 Jy ! Total flux subtracted in 100 components = 0.181969 Jy ! Clean residual min=-0.009794 max=0.015354 Jy/beam ! Clean residual mean=0.000011 rms=0.002801 Jy/beam ! Combined flux in latest and established models = 0.181969 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.181969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080736Jy sigma=0.000954 ! Fit after self-cal, rms=0.080611Jy sigma=0.000953 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.647 mas, bmaj=8.335 mas, bpa=8.763 degrees ! Estimated noise=512.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0249386 Jy ! Component: 100 - total flux cleaned = 0.0395512 Jy ! Component: 150 - total flux cleaned = 0.0492366 Jy ! Component: 200 - total flux cleaned = 0.0561942 Jy ! Total flux subtracted in 200 components = 0.0561942 Jy ! Clean residual min=-0.004816 max=0.007879 Jy/beam ! Clean residual mean=0.000011 rms=0.001525 Jy/beam ! Combined flux in latest and established models = 0.238164 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 58 components and 0.238164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072159Jy sigma=0.000836 ! Fit after self-cal, rms=0.071797Jy sigma=0.000831 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.85 HN 0.98 KP 1.01 ! LA 1.16 MK 1.00* NL 0.99 OV 1.01 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.03 KP 0.99 ! LA 1.08 MK 1.00* NL 1.06 OV 1.04 ! PT 0.96 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.03 KP 0.88 ! LA 0.86 MK 1.00* NL 1.08 OV 0.97 ! PT 0.93 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00 KP 0.87 ! LA 0.84 MK 1.00* NL 1.07 OV 1.04 ! PT 0.97 SC 0.97 ! ! ! Fit before self-cal, rms=0.071797Jy sigma=0.000831 ! Fit after self-cal, rms=0.067142Jy sigma=0.000785 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.686 mas, bmaj=8.412 mas, bpa=8.405 degrees ! Estimated noise=505.102 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13.5, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00496587 Jy ! Component: 100 - total flux cleaned = 0.00704182 Jy ! Component: 150 - total flux cleaned = 0.00777655 Jy ! Component: 200 - total flux cleaned = 0.00796917 Jy ! Total flux subtracted in 200 components = 0.00796917 Jy ! Clean residual min=-0.002144 max=0.003223 Jy/beam ! Clean residual mean=-0.000001 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.246133 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 87 components and 0.246133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066765Jy sigma=0.000779 ! Fit after self-cal, rms=0.066746Jy sigma=0.000779 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066746Jy sigma=0.000779 ! Fit after self-cal, rms=0.066639Jy sigma=0.000776 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.673 mas, bmaj=8.412 mas, bpa=8.539 degrees ! Estimated noise=504.607 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189007 Jy ! Component: 100 - total flux cleaned = 0.0022888 Jy ! Component: 150 - total flux cleaned = 0.00225573 Jy ! Component: 200 - total flux cleaned = 0.00225469 Jy ! Total flux subtracted in 200 components = 0.00225469 Jy ! Clean residual min=-0.001519 max=0.002049 Jy/beam ! Clean residual mean=-0.000000 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.248388 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 107 components and 0.248388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066566Jy sigma=0.000775 ! Fit after self-cal, rms=0.066549Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158893 Jy ! Component: 100 - total flux cleaned = 0.000253459 Jy ! Component: 150 - total flux cleaned = 0.000279076 Jy ! Component: 200 - total flux cleaned = 0.000302738 Jy ! Total flux subtracted in 200 components = 0.000302738 Jy ! Clean residual min=-0.001451 max=0.001745 Jy/beam ! Clean residual mean=-0.000000 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.24869 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 118 components and 0.24869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066522Jy sigma=0.000775 ! Fit after self-cal, rms=0.066516Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066516Jy sigma=0.000775 ! Fit after self-cal, rms=0.066529Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.674 mas, bmaj=8.409 mas, bpa=8.559 degrees ! Estimated noise=504.223 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00052157 Jy ! Component: 100 - total flux cleaned = 0.000885511 Jy ! Component: 150 - total flux cleaned = 0.000972934 Jy ! Component: 200 - total flux cleaned = 0.00101118 Jy ! Total flux subtracted in 200 components = 0.00101118 Jy ! Clean residual min=-0.001296 max=0.001649 Jy/beam ! Clean residual mean=-0.000000 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.249701 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 133 components and 0.249701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066509Jy sigma=0.000774 ! Fit after self-cal, rms=0.066507Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.92122e-05 Jy ! Component: 100 - total flux cleaned = 0.000165587 Jy ! Component: 150 - total flux cleaned = 0.000198866 Jy ! Component: 200 - total flux cleaned = 0.00026115 Jy ! Total flux subtracted in 200 components = 0.00026115 Jy ! Clean residual min=-0.001260 max=0.001484 Jy/beam ! Clean residual mean=-0.000000 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.249963 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 144 components and 0.249963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066496Jy sigma=0.000774 ! Fit after self-cal, rms=0.066494Jy sigma=0.000774 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066494Jy sigma=0.000774 ! Fit after self-cal, rms=0.066483Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.151 mas, bmaj=12.46 mas, bpa=-14.55 degrees ! Estimated noise=559.702 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000464405 Jy ! Component: 100 - total flux cleaned = 0.000678905 Jy ! Component: 150 - total flux cleaned = 0.000746171 Jy ! Component: 200 - total flux cleaned = 0.000769662 Jy ! Total flux subtracted in 200 components = 0.000769662 Jy ! Clean residual min=-0.001187 max=0.001852 Jy/beam ! Clean residual mean=-0.000000 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.250732 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 156 components and 0.250732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066477Jy sigma=0.000774 ! Fit after self-cal, rms=0.066476Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.23947e-05 Jy ! Component: 100 - total flux cleaned = 0.000136439 Jy ! Component: 150 - total flux cleaned = 0.000178554 Jy ! Component: 200 - total flux cleaned = 0.000197612 Jy ! Total flux subtracted in 200 components = 0.000197612 Jy ! Clean residual min=-0.001168 max=0.001761 Jy/beam ! Clean residual mean=0.000000 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.25093 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 176 components and 0.25093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066472Jy sigma=0.000774 ! Fit after self-cal, rms=0.066471Jy sigma=0.000774 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.675 mas, bmaj=8.405 mas, bpa=8.568 degrees ! Estimated noise=503.931 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.675 x 8.405 at 8.568 degrees (North through East) ! Clean map min=-0.001728 max=0.18662 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.949 mas, bmaj=7.461 mas, bpa=11.56 degrees ! Estimated noise=1053.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.143006 Jy ! Component: 100 - total flux cleaned = 0.179006 Jy ! Component: 150 - total flux cleaned = 0.197062 Jy ! Component: 200 - total flux cleaned = 0.209082 Jy ! Total flux subtracted in 200 components = 0.209082 Jy ! Clean residual min=-0.004504 max=0.006583 Jy/beam ! Clean residual mean=0.000000 rms=0.001345 Jy/beam ! Combined flux in latest and established models = 0.209082 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.209082 Jy ! Inverting map and beam ! Estimated beam: bmin=4.675 mas, bmaj=8.405 mas, bpa=8.568 degrees ! Estimated noise=503.931 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118168 Jy ! Component: 100 - total flux cleaned = 0.0189472 Jy ! Component: 150 - total flux cleaned = 0.0237501 Jy ! Component: 200 - total flux cleaned = 0.0272896 Jy ! Total flux subtracted in 200 components = 0.0272896 Jy ! Clean residual min=-0.001921 max=0.002336 Jy/beam ! Clean residual mean=-0.000003 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.236372 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 90 components and 0.236372 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.151 mas, bmaj=12.46 mas, bpa=-14.55 degrees ! Estimated noise=559.702 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00413202 Jy ! Component: 100 - total flux cleaned = 0.00698728 Jy ! Component: 150 - total flux cleaned = 0.00905052 Jy ! Component: 200 - total flux cleaned = 0.0105721 Jy ! Total flux subtracted in 200 components = 0.0105721 Jy ! Clean residual min=-0.001537 max=0.002245 Jy/beam ! Clean residual mean=-0.000001 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.246944 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13.5, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019884 Jy ! Component: 100 - total flux cleaned = 0.00309775 Jy ! Component: 150 - total flux cleaned = 0.00383052 Jy ! Component: 200 - total flux cleaned = 0.00447555 Jy ! Total flux subtracted in 200 components = 0.00447555 Jy ! Clean residual min=-0.001208 max=0.001187 Jy/beam ! Clean residual mean=0.000003 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.251419 Jy ! Adding 117 model components to the UV plane model. ! The established model now contains 191 components and 0.251419 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.675 mas, bmaj=8.405 mas, bpa=8.568 degrees ! Estimated noise=503.931 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.56845e-05 Jy ! Component: 100 - total flux cleaned = 0.000254714 Jy ! Component: 150 - total flux cleaned = 0.000538359 Jy ! Component: 200 - total flux cleaned = 0.000749886 Jy ! Total flux subtracted in 200 components = 0.000749886 Jy ! Clean residual min=-0.001169 max=0.001161 Jy/beam ! Clean residual mean=0.000002 rms=0.000302 Jy/beam ! Combined flux in latest and established models = 0.252169 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 225 components and 0.252169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066439Jy sigma=0.000774 ! Fit after self-cal, rms=0.066430Jy sigma=0.000774 wmodel J0144+2705_S_2014_06_09_pus_map.mod ! Writing 225 model components to file: J0144+2705_S_2014_06_09_pus_map.mod wobs J0144+2705_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J0144+2705_S_2014_06_09_pus_uvs.fits wwins J0144+2705_S_2014_06_09_pus_map.win ! wwins: Wrote 4 windows to J0144+2705_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000383463 Jy ! Component: 100 - total flux cleaned = 0.000444088 Jy ! Component: 150 - total flux cleaned = 0.000387248 Jy ! Component: 200 - total flux cleaned = 0.000405474 Jy ! Component: 250 - total flux cleaned = 0.000492153 Jy ! Component: 300 - total flux cleaned = 0.000558454 Jy ! Component: 350 - total flux cleaned = 0.000622418 Jy ! Component: 400 - total flux cleaned = 0.000731481 Jy ! Component: 450 - total flux cleaned = 0.000791827 Jy ! Component: 500 - total flux cleaned = 0.000776803 Jy ! Component: 550 - total flux cleaned = 0.000747994 Jy ! Component: 600 - total flux cleaned = 0.00080426 Jy ! Component: 650 - total flux cleaned = 0.000831725 Jy ! Component: 700 - total flux cleaned = 0.000845239 Jy ! Component: 750 - total flux cleaned = 0.000938214 Jy ! Component: 800 - total flux cleaned = 0.00102924 Jy ! Component: 850 - total flux cleaned = 0.00114402 Jy ! Component: 900 - total flux cleaned = 0.00121922 Jy ! Component: 950 - total flux cleaned = 0.00130563 Jy ! Component: 1000 - total flux cleaned = 0.00137873 Jy ! Component: 1050 - total flux cleaned = 0.00146275 Jy ! Component: 1100 - total flux cleaned = 0.00155692 Jy ! Component: 1150 - total flux cleaned = 0.00162661 Jy ! Component: 1200 - total flux cleaned = 0.00171812 Jy ! Component: 1250 - total flux cleaned = 0.00178581 Jy ! Component: 1300 - total flux cleaned = 0.00188597 Jy ! Component: 1350 - total flux cleaned = 0.00198462 Jy ! Component: 1400 - total flux cleaned = 0.00207116 Jy ! Component: 1450 - total flux cleaned = 0.00215665 Jy ! Component: 1500 - total flux cleaned = 0.0022198 Jy ! Component: 1550 - total flux cleaned = 0.00228231 Jy ! Component: 1600 - total flux cleaned = 0.00236472 Jy ! Component: 1650 - total flux cleaned = 0.00245598 Jy ! Component: 1700 - total flux cleaned = 0.00251616 Jy ! Component: 1750 - total flux cleaned = 0.00258555 Jy ! Component: 1800 - total flux cleaned = 0.00265414 Jy ! Component: 1850 - total flux cleaned = 0.0027318 Jy ! Component: 1900 - total flux cleaned = 0.00279903 Jy ! Component: 1950 - total flux cleaned = 0.00288454 Jy ! Component: 2000 - total flux cleaned = 0.00294094 Jy ! Component: 2050 - total flux cleaned = 0.00300618 Jy ! Component: 2100 - total flux cleaned = 0.00304299 Jy ! Component: 2150 - total flux cleaned = 0.00310698 Jy ! Component: 2200 - total flux cleaned = 0.00315225 Jy ! Component: 2250 - total flux cleaned = 0.00323309 Jy ! Component: 2300 - total flux cleaned = 0.00333079 Jy ! Component: 2350 - total flux cleaned = 0.00336605 Jy ! Component: 2400 - total flux cleaned = 0.00342737 Jy ! Component: 2450 - total flux cleaned = 0.0034534 Jy ! Component: 2500 - total flux cleaned = 0.00351355 Jy ! Component: 2550 - total flux cleaned = 0.00356456 Jy ! Component: 2600 - total flux cleaned = 0.00360675 Jy ! Component: 2650 - total flux cleaned = 0.00364031 Jy ! Component: 2700 - total flux cleaned = 0.00366522 Jy ! Component: 2750 - total flux cleaned = 0.00370647 Jy ! Component: 2800 - total flux cleaned = 0.00372291 Jy ! Component: 2850 - total flux cleaned = 0.00377973 Jy ! Component: 2900 - total flux cleaned = 0.00378785 Jy ! Component: 2950 - total flux cleaned = 0.00381981 Jy ! Component: 3000 - total flux cleaned = 0.00384363 Jy ! Component: 3050 - total flux cleaned = 0.00386735 Jy ! Component: 3100 - total flux cleaned = 0.00389087 Jy ! Component: 3150 - total flux cleaned = 0.00390642 Jy ! Component: 3200 - total flux cleaned = 0.00392969 Jy ! Component: 3250 - total flux cleaned = 0.00395273 Jy ! Component: 3300 - total flux cleaned = 0.00398323 Jy ! Component: 3350 - total flux cleaned = 0.00400594 Jy ! Component: 3400 - total flux cleaned = 0.00403605 Jy ! Component: 3450 - total flux cleaned = 0.00406603 Jy ! Component: 3500 - total flux cleaned = 0.00407353 Jy ! Component: 3550 - total flux cleaned = 0.00411049 Jy ! Component: 3600 - total flux cleaned = 0.00413989 Jy ! Component: 3650 - total flux cleaned = 0.00413259 Jy ! Component: 3700 - total flux cleaned = 0.00416897 Jy ! Component: 3750 - total flux cleaned = 0.00419064 Jy ! Component: 3800 - total flux cleaned = 0.00418345 Jy ! Component: 3850 - total flux cleaned = 0.00420501 Jy ! Component: 3900 - total flux cleaned = 0.00422641 Jy ! Component: 3950 - total flux cleaned = 0.00426188 Jy ! Component: 4000 - total flux cleaned = 0.00425476 Jy ! Component: 4050 - total flux cleaned = 0.00428992 Jy ! Total flux subtracted in 4096 components = 0.00428996 Jy ! Clean residual min=-0.000448 max=0.000494 Jy/beam ! Clean residual mean=0.000000 rms=0.000125 Jy/beam ! Combined flux in latest and established models = 0.256459 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 491 components and 0.256459 Jy ![Exited script file: muppet] wmap "J0144+2705_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.675 x 8.405 at 8.568 degrees (North through East) ! Clean map min=-0.0010112 max=0.18669 Jy/beam ! Writing clean map to FITS file: J0144+2705_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.186695 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000122775 device "J0144+2705_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0144+2705_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.197288 0.197288 0.394576 0.789151 1.5783 3.15661 6.31321 12.6264 25.2528 50.5057 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.186 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.675 x 8.405 at 8.568 degrees (North through East) ! Clean map min=-0.0010112 max=0.18669 Jy/beam quit ! Quitting program ! Log file J0144+2705_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:41:11 2016